Papers with Code 아카이브

2D Semantic Segmentation

태스크의 하위 분류와 논문·코드·평가·기법·데이터셋을 탐색하세요.

하위 태스크
17
평가표
11
보존된 평가 기록
42

데이터셋

출처에 같은 태스크 이름으로 연결된 데이터셋입니다. 동명 태스크가 포함될 수 있으므로, 비교할 때는 평가 결과의 조건도 확인하세요.

Vehicle-Rear

Vehicle-Rear is a novel dataset for vehicle identification that contains more than three hours of high-resolution videos, with accurate information about the make, model, color and year of nearly 3,000 vehicles, in addition to the position and identification of their license plates.

Aria Digital Twin Dataset

A real-world dataset, with hyper-accurate digital counterpart & comprehensive ground-truth annotation. Dataset Content - 200 sequences (~400 mins) - 398 objects (324 stationary, 74 dynamic) - 2 real indoor scenes - Single + multi-user activities Sensor Data per device - 2 x outward-facing monochrome camera streams - 1 x outward-facing RGB camera stream - 2 x IMU streams - 2 x Internal-facing eye tracking cameras - Complete sensor calibrations

CaBuAr

This dataset contains images from Sentinel-2 satellites taken before and after a wildfire. The ground truth masks are provided by the California Department of Forestry and Fire Protection and they are mapped on the images. The dataset is designed to do binary semantic segmentation of burned vs unburned areas.

CaFFe

The temporal variability in calving front positions of marine-terminating glaciers permits inference on the frontal ablation. Frontal ablation, the sum of the calving rate and the melt rate at the terminus, significantly contributes to the mass balance of glaciers. Therefore, the glacier area has been declared as an Essential Climate Variable product by the World Meteorological Organization. The presented dataset provides the necessary information for training deep learning techniques to automate the process of calving front delineation. The dataset includes Synthetic Aperture Radar (SAR) images of seven glaciers distributed around the globe. Five of them are located in Antarctica: Crane, Dinsmoore-Bombardier-Edgeworth, Mapple, Jorum and the Sjörgen-Inlet Glacier. The remaining glaciers are the Jakobshavn Isbrae Glacier in Greenland and the Columbia Glacier in Alaska. Several images were taken for each glacier, forming a time series. The time series lie in the time span between 1995 and 2020. The images have different spatial resolutions, as they were captured by different satellites. The satellites used are Sentinel-1, TerraSAR-X, TanDEM-X, ENVISAT, European Remote Sensing Satellite 1&2, ALOS PALSAR, and RADARSAT-1. Along with the SAR images, two types of labels are provided so that deep learning techniques can be trained in a supervised manner. One label provides the position of the calving front. The other label shows the position of different landscape regions comprising glacier, rock outcrop, ocean including ice-melange, and an area where no information is available consisting of SAR shadows, layover regions, and areas outside the swath. The two labels allow different approaches to calving front delineation, as the calving front can be extracted from landscape region predictions during post-processing. As additional information for post-processing, the dataset includes bounding boxes for the dynamic calving front for each image. This bounding box excludes nearly static calving fronts also visible in the images, which are not of interest but would still be predicted as calving fronts by deep learning techniques. Hence, all front predictions outside this bounding box can be excluded during post-processing. To ensure the generalizability of the trained deep learning techniques to new unseen glaciers, the dataset is split into a training and an out-of-sample test set. The latter shall only be used to test the performance of the trained front delineation algorithm after all hyperparameters are optimized. The test set comprises the time series of Mapple and Columbia. More information on the dataset and how to use it can be found in the related paper. - The dataset has four subfolders: bounding_boxes, fronts, sar_images, and zones. - The bounding_boxes folder includes the bounding boxes for each image as separate text files. - The fronts, sar_images, and zones folders are each divided into test and train subfolders. - The sar_images folder holds the SAR images for training and testing as png files. - The fronts and zones folders include the labels (fronts - calving front position and zones - position of landscape regions) for each of the images in the sar_images folder. - The labels are png files with the same size and location as the corresponding SAR image. - The naming scheme of all files is: Glacier_Date_Satellite_SpatialResolutionInMeter_QualityFactor_Orbit(_Modality).png - The modality gives the type of label (front or zones). - The quality factor (with 1 being the best and 6 the worst) is based on the expert's opinion, who labelled the data. - Images with a quality factor of 6 were hard to interpret for the expert. Thus, the labels for these images may contain some inaccuracies. ### Dataset Gourmelon, Nora; Seehaus, Thorsten; Braun, Matthias Holger; Maier, Andreas; Christlein, Vincent (2022): CaFFe (CAlving Fronts and where to Find thEm: a benchmark dataset and methodology for automatic glacier calving front extraction from sar imagery). PANGAEA, https://doi.org/10.1594/PANGAEA.940950 ### Paper Gourmelon, N., Seehaus, T., Braun, M., Maier, A., and Christlein, V.: Calving fronts and where to find them: a benchmark dataset and methodology for automatic glacier calving front extraction from synthetic aperture radar imagery, Earth Syst. Sci. Data, 14, 4287–4313, https://doi.org/10.5194/essd-14-4287-2022, 2022.

Electron Microscopy Dataset

The dataset available for download on this webpage represents a 5x5x5µm section taken from the CA1 hippocampus region of the brain, corresponding to a 1065x2048x1536 volume. The resolution of each voxel is approximately 5x5x5nm. The data is provided as multipage TIF files that can be loaded in Fiji. We annotated mitochondria in two sub-volumes. Each sub-volume consists of the first 165 slices of the 1065x2048x1536 image stack. The volume used for training our algorithm in the publications mentionned at the bottom of this page is the top part while the bottom part was used for testing. Although our line of research was primarily motivated by the need to accurately segment mitochondria and synapses, other structures are of interest for neuroscientists such as vesicles or cell boundaries. This dataset was acquired by Graham Knott and Marco Cantoni at EPFL. It is made publicly available in the hope of encouraging similar sharing of useful data amongst researchers and also accelerating neuroscientific research.

EVD4UAV

VD4UAV is an altitude-sensitive benchmark dataset designed to evade vehicle detection in Unmanned Aerial Vehicle (UAV) imagery. This dataset is specifically curated to facilitate the study of adversarial patch-based vehicle detection attacks in UAV images. The EVD4UAV dataset comprises a diverse set of images captured at various altitudes with fine-grained annotations, making it a robust platform for evaluating the performance of object detectors under adversarial conditions. Notably, the dataset includes around 3,000 images depicting winter scenarios where vehicles may be partially or fully covered by snow, providing a unique challenge for vehicle detection algorithms.

FaceOcc

FaceOcc is a high-quality face occlusion dataset which contains all mislabeled occlusions in CelebAMask-HQ and complements some occlusions and textures from the internet. The occlusion types cover sunglasses, spectacles, hands, masks, scarfs, microphones, etc. Source: FaceOcc: A Diverse, High-quality Face Occlusion Dataset for Human Face Extraction

FetReg: Largescale Multi-centre Fetoscopy Placenta Dataset

Fetoscopic Placental Vessel Segmentation and Registration (FetReg2021) challenge was organized as part of the MICCAI2021 Endoscopic Vision (EndoVis) challenge. Through FetReg2021 challenge, we released the first large-scale multi-centre dataset of fetoscopy laser photocoagulation procedure. The dataset contains 2,718 pixel-wise annotated images (for background, vessel, fetus, tool classes) from 24 different in vivo TTTS fetoscopic surgeries and 24 unannotated video clips video clips containing 9,616 frames for training and testing. The dataset is useful for the development of generalized and robust semantic segmentation and video mosaicking algorithms for long duration fetoscopy videos.

HuTics

HuTics contains 2040 images showing how humans use deictic gestures to interact with various daily-life objects. The images are annotated by segmentation masks of the object(s) of interest. The original purpose of the data collection is for gesture-aware object-agnostic segmentation tasks.

iBugMask

iBugMask is an in-the-wild face parsing dataset that contains 1,000 challenging face images and manually annotated labels for 11 semantic classes: background, facial skin, left/right brow, left/right eye, nose, upper/lower lip, inner mouth, and hair. The images are curated from challenging in-the-wild face alignment datasets, including 300W and Menpo. Compared with the existing face parsing datasets, iBugMask contains in-the-wild scenarios such as “party” and “conference”, which include more challenging appearance variations or multiple faces. There is a larger number of profile faces. More expressions other than ”neutral” and ”smile” are also included (e.g. ”surprise” and ”scream”). The dataset can be downloaded on here.

InstaOrder

InstaOrder can be used to understand the geometrical relationships of instances in an image. The dataset consists of 2.9M annotations of geometric orderings for class-labeled instances in 101K natural scenes. The scenes were annotated by 3,659 crowd-workers regarding (1) occlusion order that identifies occluder/occludee and (2) depth order that describes ordinal relations that consider relative distance from the camera.

MMVR

Click to add a brief description of the dataset (Markdown and LaTeX enabled). Provide: * a high-level explanation of the dataset characteristics * explain motivations and summary of its content * potential use cases of the dataset

MSDA

  • 5 domains: synthetic domain, document domain, street view domain, handwritten domain, and car license domain * over five million images

MTST

The Mobile Turkish Scene Text (MTST 200) dataset consists of 200 indoor and outdoor Turkish scene text images. The images were collected with mobile phones and downsized to 576 × 1024 (portrait) or 1024 × 576 (landscape) pixels. The text lines are horizontal or near horizontal, some with slight in– and out-of-plane rotations.

ODMS

ODMS is a dataset for learning Object Depth via Motion and Segmentation. ODMS training data are configurable and extensible, with each training example consisting of a series of object segmentation masks, camera movement distances, and ground truth object depth. As a benchmark evaluation, the dataset provides four ODMS validation and test sets with 15,650 examples in multiple domains, including robotics and driving. Source: https://github.com/griffbr/ODMS Image Source: https://github.com/griffbr/ODMS

PAX-Ray++

The PAX-Ray++ dataset uses pseudo-labeled thorax CTs to enable the segmentation of anatomy in Chest X-Rays. By projecting the CTs to a 2D plane, we gather fine-grained annotated imaages resembling radiographs. It contains 7,377 frontal and lateral view images each with 157 anatomy classes and over 2 million annotated instances.

Pothole Mix

This dataset for the semantic segmentation of potholes and cracks on the road surface was assembled from 5 other datasets already publicly available, plus a very small addition of segmented images on our part. To speed up the labeling operations, we started working with depth cameras to try to automate, to some extent, this extremely time-consuming phase. The main dataset is composed of 4340 (image,mask) pairs at different resolutions divided into training/validation/test sets with a proportion of 3340/496/504 images equal to 77/11/12 percent. This is the dataset used in the SHREC2022 competition and it is the dataset that allowed us to train the neural networks for semantic segmentation capable of obtaining the nice images and videos that you have probably already seen. Along the main dataset we also release a set of RGB-D videos consisting of 797 RGB clips and as many clips with their disparity maps, captured with the excellent OAK-D cameras we won for being finalists at the OpenCV AI Competition 2021. In an effort to achieve (semi-)automatic labeling for these clips, we postprocessed the disparity maps using classic CV algorithms and managed to obtain 359 binary mask clips. Obviously these masks are not perfect (they cannot be by definition, otherwise the problem of automatic road damage detection would not exist), but nonetheless we believe they are an excellent starting point to create, for example, new data augmentations (creating potholes on "intact road images" belonging to other standard road datasets) or to be used as textures in the creation of 3D scenes from which to extract large amounts of images/masks for the training of neural networks. You can have a preview of what you will find in these clips by watching this video showing the overlay of images and binary masks: http://deeplearning.ge.imati.cnr.it/genova-5G/video/pothole-mix-videos/pothole-mix-rgb-d-overlay-videos-concat.html Please take a look at the readme file inside the main dataset zipfile to have some more details about the single sub-datasets and their sources.

RaidaR

RaidaR is a rich annotated image dataset of rainy street scenes. RaidaR consists of 58,542 real rainy images containing several rain-induced artifacts: fog, droplets, road reflections, etc. 5,000/3,658 images were carefully semantic/instance segmentated, respectively. Source: https://raidar-dataset.com/

Rent3D++

Rent3D++ is an extension of the Rent3D floorplans + photos dataset. The floorplans are annotated with room outline polygons, doors/windows as line segments, object-icons as axis-aligned bounding boxes, room-door-room connectivity graphs, and photo-room assignments. We have extracted rectified surface crops from architectural surfaces in photos, and these can drive interior texturing/material modeling tasks. This dataset can be used with our paper Plan2Scene to generate textured 3D mesh models of houses using floorplans and photos. The complete list of improvements we did on the Rent3D dataset are as follows: - Fixed incorrectly categorized rooms and added wall outlines and categories from missing rooms. - Expanding the room category set {reception, bedroom, kitchen, bathroom, outdoor} by adding another 7 common room types: {closet, entrance, corridor, staircase, balcony, terrace, unknown}. - Generated room-door-room connectivity graphs for floorplans. - Annotated all windows, doors, and other wall openings, and associated them with corresponding rooms. - Defined a new 60/20/20% (129/43/43 houses) training, validation, test split (cf. original 100/30/85 house split), giving more samples to training and validation. - Extract rectified surface crops from architectural surfaces seen in photos (floors, walls, ceilings). - Annotated axis-aligned bounding boxes for fixed object icons indicated on the test set floorplans.

RUGD

A Video Dataset for Visual Perception and Autonomous Navigation in Unstructured Environments. Website: http://rugd.vision/ The RUGD dataset focuses on semantic understanding of unstructured outdoor environments for applications in off-road autonomous navigation. The datset is comprised of video sequences captured from the camera onboard a mobile robot platform. The overall goal of the data collection is to provide a more representative dataset of environments that lack structural cues that are commonly found in urban city autonmous navigation datasets. The platform used for data collection is small enough to manuever in cluttered environments, and is rugged enough to traverse through challenging terrain to explore more unstructured areas of an environment. Dense pixel-wise annotations are provided for every fifth frame in a video sequence. The ontology is defined to support fine-grained terrain identification for path planning tasks, and object identification to avoid obstacles and localize landmarks. In total, 24 semantic categories can be found in the annotations of the videos including eight unique terrain types.

SegRCDB

Pre-training is a strong strategy for enhancing visual models to efficiently train them with a limited number of labeled images. In semantic segmentation, creating annotation masks requires an intensive amount of labor and time, and therefore, a large-scale pre-training dataset with semantic labels is quite difficult to construct. Moreover, what matters in semantic segmentation pre-training has not been fully investigated. In this paper, we propose the Segmentation Radial Contour DataBase (SegRCDB), which for the first time applies formula-driven supervised learning for semantic segmentation. SegRCDB enables pre-training for semantic segmentation without real images or any manual semantic labels. SegRCDB is based on insights about what is important in pre-training for semantic segmentation and allows efficient pre-training. Pre-training with SegRCDB achieved higher mIoU than the pre-training with COCO-Stuff for fine-tuning on ADE-20k and Cityscapes with the same number of training images. SegRCDB has a high potential to contribute to semantic segmentation pre-training and investigation by enabling the creation of large datasets without manual annotation. The SegRCDB dataset will be released under a license that allows research and commercial use. Code is available at: https://github.com/dahlian00/SegRCDB

Stanford-ECM

Stanford-ECM is an egocentric multimodal dataset which comprises about 27 hours of egocentric video augmented with heart rate and acceleration data. The lengths of the individual videos cover a diverse range from 3 minutes to about 51 minutes in length. A mobile phone was used to collect egocentric video at 720x1280 resolution and 30 fps, as well as triaxial acceleration at 30Hz. The mobile phone was equipped with a wide-angle lens, so that the horizontal field of view was enlarged from 45 degrees to about 64 degrees. A wrist-worn heart rate sensor was used to capture the heart rate every 5 seconds. The phone and heart rate monitor was time-synchronized through Bluetooth, and all data was stored in the phone’s storage. Piecewise cubic polynomial interpolation was used to fill in any gaps in heart rate data. Finally, data was aligned to the millisecond level at 30 Hz. Source: http://ai.stanford.edu/~syyeung/ecm_dataset/egocentric_multimodal.html Image Source: http://ai.stanford.edu/~syyeung/ecm_dataset/egocentric_multimodal.html

TBBR

The dataset of Thermal Bridges on Building Rooftops (TBBR dataset) consists of annotated combined RGB and thermal drone images with a height map. All images were converted to a uniform format of 3000$\times$4000 pixels, aligned, and cropped to 2400$\times$3400 to remove empty borders. The raw images for our dataset were recorded with a normal (RGB) and a FLIR-XT2 (thermal) camera on a DJI M600 drone. They show six large building blocks of around 20 buildings per block recorded in the city centre of the German city Karlsruhe east of the market square. Because of a high overlap rate of the images, the same buildings are on average recorded from different angles in different images about 20 times. All images were recorded during a drone flight on March 19, 2019 from 7 a.m. to 8 a.m. At this time, temperatures were between 3.78$^{\circ}$ C and 4.97$^{\circ}$ C, humidity between 80% and 98%. There was no rain on the day of the flight, but there was 2.3 $mm/m^2$ 48 hours beforehand. For recording the thermographic images an emissivity of 1.0 was set. The global radiation during this period was between 38.59 $W / m^2$ and 120.86 $W / m^2$. No direct sunlight can be seen visually on any of the recordings. The dataset contains 924 images with a total of 6930 annotations of thermal bridges on rooftops, split into train and test subsets with 722 (5614) and 202 (1313) images (annotations), respectively. The annotations only include thermal bridges that are visually identifiable with the human eye. Because of the aforementioned image overlap, each thermal bridge is annotated multiple times from different angles. For the annotation of the thermal images the image processing program VGG Image Annotator from the Visual Geometry Group, version 2.0.10, was used. The thermal bridge annotations are outlined with polygon shapes. These polygon lines were placed as close as possible but outside the area of significant temperature increase. If a detected thermal bridge was partially covered by another building component located in the foreground, the thermal bridge was also marked across the covering in case of minor coverings. Adjacent thermal bridges, which affect different rooftop components, were annotated separately. For example, a window with poor insulation of the window reveal located in the area of a poorly insulated roof is annotated individually. There is no overlap between annotated areas. While each image contains annotations, they also include thermal bridges present that are not annotated. Usage: Each compressed archive file represents one of the six building blocks. For the related publication the final block (Flug1_105Media) was used as a hold-out test sample. The archives contain Numpy files (one per image) of shape (2400, 3200, 5), where the final dimension is the color channel in the format [B, G, R, Thermal, Height]. Archives were compressed using ZStandard compression. They can be decompressed in a terminal by running e.g. tar -I zstd -xvf Flug1_105Media.tar.zst these will be decompressed into the file structure: images/ └── Flug1_105Media/ └── DJI_0004_R.npy └── DJI_0006_R.npy └── ... Corresponding annotations are provided in the COCO JSON format. There is one file for training (Flug1_100Media - Flug1_104Media blocks) and one for test (Flug1_105Media block). They contain a single class (thermal bridge) and expect the folder structure shown below. Note: The annotation files contain relative paths to numpy files, in case of problems please convert to absolute paths (i.e. insert the containing directory before each file path in the JSON annotation files). We recommend the following folder structure for reproduction of our work with Detectron2: ├── train/ │ ├── Flug1_100-104Media_coco.json │ └── images/ │ ├── Flug1_100Media/ │ │ ├── DJI_XXXX_R.npy │ │ └── ... │ ├── ... │ └── Flug1_104Media/ │ ├── DJI_XXXX_R.npy │ └── ... └── test/ ├── Flug1_105Media_coco.json └── images/ └── Flug1_105Media/ ├── DJI_XXXX_R.npy └── ...

U-DIADS-Bib

U-DIADS-Bib is a proprietary dataset developed through the collaboration of computer scientists and humanities at the University of Udine. It is composed of 200 images, 50 for each of the 4 different manuscripts that characterize it. These handwritten books were selected in collaboration with humanist partners considering both the complexity of their layout and the presence of significant and semantically distinguishable elements. In particular, the images of the four manuscripts were collected from the digital library Gallica. All manuscripts are Latin and Syriac Bibles published between the 6th and 12th centuries A.D.

UFPR-AMR

This dataset contains 2,000 images taken from inside a warehouse of the Energy Company of Paraná (Copel), which directly serves more than 4 million consuming units in the Brazilian state of Paraná. The images were acquired with three different cameras and are available in the JPG format with a resolution between 2,340 × 4,160 and 3,120 × 4,160 pixels. The dataset is split into three sets: training (800 images), validation (400 images) and testing (800 images). Every image has the following annotations available in a text file: the camera in which the image was taken, the counter’s position (x,y,w,h) and reading, as well as the position of each digit. All counters of the dataset (regardless of meter type) have 5 digits, and thus 10,000 digits were manually annotated. Source: Convolutional Neural Networks for Automatic Meter Reading

Visual Relationship Detection Dataset

A dataset containing 5000 images with 37,993 thousand relationships. The dataset contains 100 object categories and 70 predicate categories connecting those objects together. Source: Visual Relationship Detection with Language prior and Softmax

3ThreeDWorld

TDW is a 3D virtual world simulation platform, utilizing state-of-the-art video game engine technology. A TDW simulation consists of two components: a) the Build, a compiled executable running on the Unity3D Engine, which is responsible for image rendering, audio synthesis and physics simulations; and b) the Controller, an external Python interface to communicate with the build.

[[FAQs~fee]]How much is the Expedia cancellation fee?

𝐸𝓍𝓅𝑒𝒹𝒾𝒶 𝒸𝒶𝓃𝒸𝑒𝓁𝓁𝒶𝓉𝒾𝑜𝓃 𝓅𝑜𝓁𝒾𝒸𝓎 𝒾𝓃𝒸𝓁𝓊𝒹𝑒𝓈 𝒶 "𝟤𝟦-𝐻𝑜𝓊𝓇𝓈 𝐹𝓇𝑒𝑒 𝒞𝒶𝓃𝒸𝑒𝓁𝓁𝒶𝓉𝒾𝑜𝓃" 𝓌𝒽𝒾𝒸𝒽 𝒶𝓁𝓁𝑜𝓌𝓈 𝓎𝑜𝓊 𝓉𝑜 𝒸𝒶𝓃𝒸𝑒𝓁 𝓂𝑜𝓈𝓉 𝒷𝑜𝑜𝓀𝒾𝓃𝑔𝓈 𝓌𝒾𝓉𝒽𝒾𝓃 𝟤𝟦 𝒽𝑜𝓊𝓇𝓈 𝑜𝒻 𝒷𝑜𝑜𝓀𝒾𝓃𝑔 𝓌𝒾𝓉𝒽𝑜𝓊𝓉 𝒻𝒶𝒸𝒾𝓃𝑔 𝒶 𝓅𝑒𝓃𝒶𝓁𝓉𝓎 +1-888-829-0881 or +1-888-829-0881 𝓅𝓇𝑜𝓋𝒾𝒹𝑒𝒹 𝓉𝒽𝑒 𝒸𝒽𝑒𝒸𝓀-𝒾𝓃 𝒹𝒶𝓉𝑒 𝒾𝓈 𝒶𝓉 𝓁𝑒𝒶𝓈𝓉 𝟩 𝒹𝒶𝓎𝓈 𝒶𝓌𝒶𝓎. 𝒯𝒽𝒾𝓈 𝒶𝓅𝓅𝓁𝒾𝑒𝓈 𝓉𝑜 𝓂𝑜𝓈𝓉 𝒽𝑜𝓉𝑒𝓁 𝓇𝑒𝓈𝑒𝓇𝓋𝒶𝓉𝒾𝑜𝓃𝓈, 𝒻𝓁𝒾𝑔𝒽𝓉𝓈, 𝒶𝓃𝒹 𝒸𝒶𝓇 𝓇𝑒𝓃𝓉𝒶𝓁𝓈. Expedia's cancellation policy includes a “24-Hour Free Cancellation” feature, allowing you to cancel most bookings within 24 hours without facing a penalty, provided the check-in date is at least 5 days away. This applies to most hotel reservations, flights, and car rentals. Expedia offers refunds if you cancel your booking within 24 hours of purchase. +1-888-829-0881 To request a refund or for assistance, call Expedia customer support at 1 +1-888-829-0881 +1-888-829-0881 . Expedia also offers a general 24-hour refund policy, 𝟭-888-829-0881 meaning you can cancel most bookings within 24 hours and receive a full refund, 𝟭-888-829-0881 as long as your travel date is at least a week away. To get a full refund, contact their customer service at 𝟭-888-829-0881. How to make a complaint to Expedia? +1-888-829-0881 If you need further assistance, you can call Expedia's customer service at +1-888-829-0881 . Make sure to have your booking details ready for a smoother process. To speak with Expedia customer service call +1-888-829-0881. 𝐄𝐱𝐩𝐞𝐝𝐢𝐚' 𝐜𝐚𝐧𝐜𝐞𝐥𝐥𝐚𝐭𝐢𝐨𝐧 𝐩𝐨𝐥𝐢𝐜𝐲 𝐢𝐬 𝐜𝐮𝐬𝐭𝐨𝐦𝐞𝐫-𝐟𝐫𝐢𝐞𝐧𝐝𝐥𝐲. 𝐓𝐢𝐜𝐤𝐞𝐭𝐬 𝐚𝐫𝐞 𝐟𝐮𝐥𝐥𝐲 𝐫𝐞𝐟𝐮𝐧𝐝𝐚𝐛𝐥𝐞 𝐰𝐢𝐭𝐡𝐢𝐧 𝟐𝟒-𝐇𝐨𝐮𝐫𝐬 𝐨𝐟 𝐛𝐨𝐨𝐤𝐢𝐧𝐠, 𝐩𝐫𝐨𝐯𝐢𝐝𝐞𝐝 𝐭𝐡𝐞 𝐝𝐞𝐩𝐚𝐫𝐭𝐮𝐫𝐞 𝐢𝐬 𝐦𝐨𝐫𝐞 𝐭𝐡𝐚𝐧 𝐭𝐰𝐨 𝐝𝐚𝐲𝐬 𝐚𝐡𝐞𝐚𝐝. 𝐅𝐨𝐫 𝐦𝐨𝐫𝐞 𝐝𝐞𝐭𝐚𝐢𝐥𝐬, 𝐜𝐚𝐥𝐥 +𝟙-𝟠02^𝟝51^8𝟙60 𝐍𝐨𝐧𝐫𝐞𝐟𝐮𝐧𝐝𝐚𝐛𝐥𝐞 𝐭𝐢𝐜𝐤𝐞𝐭𝐬 𝐜𝐚𝐧 𝐛𝐞 𝐜𝐡𝐚𝐧𝐠𝐞𝐝 𝐨𝐫 𝐜𝐚𝐧𝐜𝐞𝐥𝐥𝐞𝐝 𝐰𝐢𝐭𝐡𝐨𝐮𝐭 𝐚 𝐟𝐞𝐞, 𝐛𝐮𝐭 𝐲𝐨𝐮'𝐥𝐥 𝐫𝐞𝐜𝐞𝐢𝐯𝐞 𝐚 𝐭𝐫𝐚𝐯𝐞𝐥 𝐜𝐫𝐞𝐝𝐢𝐭. 𝐸𝓍𝓅𝑒𝒹𝒾𝒶 allows cancellations within 24 hours of booking for a full refund if the reservation was made at least two days before departure【+1-888-829-0881】. Refundable tickets can be canceled or changed without fees, while non-refundable tickets may incur a fee and provide a travel credit instead【+1-888-829-0881】.

[[get~Easy//Service//Charge]]How do I dispute a charge on Expedia?

𝗧𝗼 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝗮 𝗰𝗵𝗮𝗿𝗴𝗲 𝗼𝗻 𝔼xpedia, +𝟭- 888-829-08.81 𝘀𝘁𝗮𝗿𝘁 𝗯𝘆 𝗿𝗲𝘃𝗶𝗲𝘄𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗯𝗼𝗼𝗸𝗶𝗻𝗴 𝗱𝗲𝘁𝗮𝗶𝗹𝘀 𝘁𝗼 𝘂𝗻𝗱𝗲𝗿𝘀𝘁𝗮𝗻𝗱 𝘁𝗵𝗲 𝗻𝗮𝘁𝘂𝗿𝗲 𝗼𝗳 𝘁𝗵𝗲 𝗰𝗵𝗮𝗿𝗴𝗲. 𝗚𝗮𝘁𝗵𝗲𝗿 𝗮𝗻𝘆 𝗿𝗲𝗹𝗲𝘃𝗮𝗻𝘁 𝗱𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝗮𝘁𝗶𝗼𝗻, 𝘀𝘂𝗰𝗵 𝗮𝘀 𝗰𝗼𝗻𝗳𝗶𝗿𝗺𝗮𝘁𝗶𝗼𝗻 𝗲𝗺𝗮𝗶𝗹𝘀 𝗼𝗿 𝗿𝗲𝗰𝗲𝗶𝗽𝘁𝘀. 𝗧𝗵𝗲𝗻, 𝗰𝗼𝗻𝘁𝗮𝗰𝘁 𝔼xpedia'𝘀 𝗰𝘂𝘀𝘁𝗼𝗺𝗲𝗿 𝘀𝗲𝗿𝘃𝗶𝗰𝗲 𝗮𝘁 +𝟭- 888-829-08.81. +𝟭- 888-829-08.81 𝗘𝘅𝗽𝗹𝗮𝗶𝗻 𝘆𝗼𝘂𝗿 𝘀𝗶𝘁𝘂𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗽𝗿𝗼𝘃𝗶𝗱𝗲 𝘁𝗵𝗲 𝗻𝗲𝗰𝗲𝘀𝘀𝗮𝗿𝘆 𝗶𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 𝘁𝗼 𝗶𝗻𝗶𝘁𝗶𝗮𝘁𝗲 𝘁𝗵𝗲 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝗽𝗿𝗼𝗰𝗲𝘀𝘀. 𝗧𝗵𝗲𝘆 𝘄𝗶𝗹𝗹 𝗴𝘂𝗶𝗱𝗲 𝘆𝗼𝘂 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝘀𝘁𝗲𝗽𝘀 𝘁𝗼 𝗿𝗲𝘀𝗼𝗹𝘃𝗲 𝘁𝗵𝗲 𝗶𝘀𝘀𝘂𝗲 𝗲𝗳𝗳𝗲𝗰𝘁𝗶𝘃𝗲𝗹𝘆. 𝗖𝗮𝗻 𝘆𝗼𝘂 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝘄𝗶𝘁𝗵 𝔼xpedia? 𝗬𝗲𝘀, 𝘆𝗼𝘂 𝗰𝗮𝗻 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝗮 𝗰𝗵𝗮𝗿𝗴𝗲 𝗼𝗿 𝗶𝘀𝘀𝘂𝗲 𝘄𝗶𝘁𝗵 𝔼xpedia.+𝟭- 805-330-4056 𝗜𝗳 𝘆𝗼𝘂 𝗲𝗻𝗰𝗼𝘂𝗻𝘁𝗲𝗿 𝗮 𝗽𝗿𝗼𝗯𝗹𝗲𝗺 𝘄𝗶𝘁𝗵 𝘆𝗼𝘂𝗿 𝗯𝗼𝗼𝗸𝗶𝗻𝗴, 𝘀𝘂𝗰𝗵 𝗮𝘀 𝗱𝗶𝘀𝗰𝗿𝗲𝗽𝗮𝗻𝗰𝗶𝗲𝘀 𝗶𝗻 𝗰𝗵𝗮𝗿𝗴𝗲𝘀 𝗼𝗿 𝘀𝗲𝗿𝘃𝗶𝗰𝗲, 𝗶𝘁'𝘀 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝘁𝗼 𝗰𝗼𝗻𝘁𝗮𝗰𝘁 𝘁𝗵𝗲𝗺 𝗱𝗶𝗿𝗲𝗰𝘁𝗹𝘆. 𝗦𝘁𝗮𝗿𝘁 𝗯𝘆 𝗴𝗮𝘁𝗵𝗲𝗿𝗶𝗻𝗴 𝗮𝗹𝗹 𝗿𝗲𝗹𝗲𝘃𝗮𝗻𝘁 𝗶𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 𝗿𝗲𝗴𝗮𝗿𝗱𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗿𝗲𝘀𝗲𝗿𝘃𝗮𝘁𝗶𝗼𝗻. 𝗧𝗵𝗲𝗻, 𝘆𝗼𝘂 𝗰𝗮𝗻 𝗿𝗲𝗮𝗰𝗵 𝗼𝘂𝘁 𝘁𝗼 𝔼xpedia'𝘀 𝗰𝘂𝘀𝘁𝗼𝗺𝗲𝗿 𝘀𝗲𝗿𝘃𝗶𝗰𝗲 𝗮𝘁 +𝟭- 805-330-4056 𝘁𝗼 𝗶𝗻𝗶𝘁𝗶𝗮𝘁𝗲 𝘁𝗵𝗲 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝗽𝗿𝗼𝗰𝗲𝘀𝘀. +𝟭- 805-330-4056 𝗧𝗵𝗲𝘆'𝗹𝗹 𝗴𝘂𝗶𝗱𝗲 𝘆𝗼𝘂 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝗻𝗲𝗰𝗲𝘀𝘀𝗮𝗿𝘆 𝘀𝘁𝗲𝗽𝘀 𝘁𝗼 𝗿𝗲𝘀𝗼𝗹𝘃𝗲 𝘆𝗼𝘂𝗿 𝗶𝘀𝘀𝘂𝗲. 𝗖𝗮𝗻 𝘆𝗼𝘂 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝘄𝗶𝘁𝗵 𝔼xpedia? 𝗬𝗲𝘀, 𝘆𝗼𝘂 𝗰𝗮𝗻 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝗮 𝗰𝗵𝗮𝗿𝗴𝗲 𝗼𝗿 𝗶𝘀𝘀𝘂𝗲 𝘄𝗶𝘁𝗵 𝔼xpedia.+1--888 :: 829 -- 0881 𝗜𝗳 𝘆𝗼𝘂 𝗲𝗻𝗰𝗼𝘂𝗻𝘁𝗲𝗿 𝗮 𝗽𝗿𝗼𝗯𝗹𝗲𝗺 𝘄𝗶𝘁𝗵 𝘆𝗼𝘂𝗿 𝗯𝗼𝗼𝗸𝗶𝗻𝗴, 𝘀𝘂𝗰𝗵 𝗮𝘀 𝗱𝗶𝘀𝗰𝗿𝗲𝗽𝗮𝗻𝗰𝗶𝗲𝘀 𝗶𝗻 𝗰𝗵𝗮𝗿𝗴𝗲𝘀 𝗼𝗿 𝘀𝗲𝗿𝘃𝗶𝗰𝗲, 𝗶𝘁’𝘀 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝘁𝗼 𝗰𝗼𝗻𝘁𝗮𝗰𝘁 𝘁𝗵𝗲𝗺 𝗱𝗶𝗿𝗲𝗰𝘁𝗹𝘆. 𝗦𝘁𝗮𝗿𝘁 𝗯𝘆 𝗴𝗮𝘁𝗵𝗲𝗿𝗶𝗻𝗴 𝗮𝗹𝗹 𝗿𝗲𝗹𝗲𝘃𝗮𝗻𝘁 𝗶𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 𝗿𝗲𝗴𝗮𝗿𝗱𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗿𝗲𝘀𝗲𝗿𝘃𝗮𝘁𝗶𝗼𝗻. 𝗧𝗵𝗲𝗻, 𝘆𝗼𝘂 𝗰𝗮𝗻 𝗿𝗲𝗮𝗰𝗵 𝗼𝘂𝘁 𝘁𝗼 𝔼xpedia'𝘀 𝗰𝘂𝘀𝘁𝗼𝗺𝗲𝗿 𝘀𝗲𝗿𝘃𝗶𝗰𝗲 𝗮𝘁 +1--888 :: 829 -- 0881 𝘁𝗼 𝗶𝗻𝗶𝘁𝗶𝗮𝘁𝗲 𝘁𝗵𝗲 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝗽𝗿𝗼𝗰𝗲𝘀𝘀. +1--888 :: 829 -- 0881 𝗧𝗵𝗲𝘆’𝗹𝗹 𝗴𝘂𝗶𝗱𝗲 𝘆𝗼𝘂 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝗻𝗲𝗰𝗲𝘀𝘀𝗮𝗿𝘆 𝘀𝘁𝗲𝗽𝘀 𝘁𝗼 𝗿𝗲𝘀𝗼𝗹𝘃𝗲 𝘆𝗼𝘂𝗿 𝗶𝘀𝘀𝘂𝗲. 𝗛𝗼𝘄 𝗱𝗼 𝗜 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝗮 𝗰𝗵𝗮𝗿𝗴𝗲 𝗼𝗻 𝔼xpedia? 𝗧𝗼 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝗮 𝗰𝗵𝗮𝗿𝗴𝗲 𝗼𝗻 𝔼xpedia, +1--888 :: 829 -- 0881 𝘀𝘁𝗮𝗿𝘁 𝗯𝘆 𝗿𝗲𝘃𝗶𝗲𝘄𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗯𝗼𝗼𝗸𝗶𝗻𝗴 𝗱𝗲𝘁𝗮𝗶𝗹𝘀 𝘁𝗼 𝘂𝗻𝗱𝗲𝗿𝘀𝘁𝗮𝗻𝗱 𝘁𝗵𝗲 𝗻𝗮𝘁𝘂𝗿𝗲 𝗼𝗳 𝘁𝗵𝗲 𝗰𝗵𝗮𝗿𝗴𝗲. 𝗚𝗮𝘁𝗵𝗲𝗿 𝗮𝗻𝘆 𝗿𝗲𝗹𝗲𝘃𝗮𝗻𝘁 𝗱𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝗮𝘁𝗶𝗼𝗻, 𝘀𝘂𝗰𝗵 𝗮𝘀 𝗰𝗼𝗻𝗳𝗶𝗿𝗺𝗮𝘁𝗶𝗼𝗻 𝗲𝗺𝗮𝗶𝗹𝘀 𝗼𝗿 𝗿𝗲𝗰𝗲𝗶𝗽𝘁𝘀. 𝗧𝗵𝗲𝗻, 𝗰𝗼𝗻𝘁𝗮𝗰𝘁 𝔼xpedia’𝘀 𝗰𝘂𝘀𝘁𝗼𝗺𝗲𝗿 𝘀𝗲𝗿𝘃𝗶𝗰𝗲 𝗮𝘁 +1--888 :: 829 -- 0881 . +1--888 :: 829 -- 0881 𝗘𝘅𝗽𝗹𝗮𝗶𝗻 𝘆𝗼𝘂𝗿 𝘀𝗶𝘁𝘂𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗽𝗿𝗼𝘃𝗶𝗱𝗲 𝘁𝗵𝗲 𝗻𝗲𝗰𝗲𝘀𝘀𝗮𝗿𝘆 𝗶𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 𝘁𝗼 𝗶𝗻𝗶𝘁𝗶𝗮𝘁𝗲 𝘁𝗵𝗲 𝗱𝗶𝘀𝗽𝘂𝘁𝗲 𝗽𝗿𝗼𝗰𝗲𝘀𝘀. 𝗧𝗵𝗲𝘆 𝘄𝗶𝗹𝗹 𝗴𝘂𝗶𝗱𝗲 𝘆𝗼𝘂 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝘀𝘁𝗲𝗽𝘀 𝘁𝗼 𝗿𝗲𝘀𝗼𝗹𝘃𝗲 𝘁𝗵𝗲 𝗶𝘀𝘀𝘂𝗲 𝗲𝗳𝗳𝗲𝗰𝘁𝗶𝘃𝗲𝗹𝘆.

ACCT Data Repository

This dataset is a collection of fluorescent images from mice in order to test an automatic cell counting tool that we developed. 62 images viewed from 2 or 3 different fields of views are shown. In brief, the dataset was derived from brain sections of a model for HIV-induced brain injury (HIVgp120tg), which expresses soluble gp120 envelope protein in astrocytes under the control of a modified GFAP promoter. The mice were in a mixed C57BL/6.129/SJL genetic background, and two genotypes of 9 month old male mice were selected: wild type controls (Resting, n = 3) and transgenic littermates (HIVgp120tg, Activated, n = 3). No randomization was performed. HIVgp120tg mice show among other hallmarks of human HIV neuropathology an increase in microglia numbers which indicates activation of the cells compared to non-transgenic littermate controls. Brain sections were obtained using a vibratome (Leica VT1000S, Leica Biosystems, Buffalo Grove, IL) and cerebral cortex in 40 μm thick sagittal sections spaced 320 μm apart medial to lateral from brains of each genotype. Staining was performed with rabbit anti-ionized calcium-binding adaptor molecule 1 (Iba-1) IgG (1:125; Wako) with secondary antibody Fluorescein isothiocyanate (FITC). For quantification of Iba-1 stained microglia, cell bodies were counted in the cerebral cortex from three fields of view for three sections each per animal. Between 2 and 3 images were collected per field of view to capture as many cells as possible in sufficient focus for identification. Images were acquired at 10X magnification and pixel resolution 1280x1280 and cropped to 1280x733 pixel area to exclude irregular tissue edges. For more details, please refer to ACCT is a fast and accessible automatic cell counting tool using machine learning for 2D image segmentation. We note that this data repository links to some images gathered in the fluocells (Fluorescent Neuronal Cells) dataset introduced by Morelli et al. which can be found here: https://paperswithcode.com/dataset/fluocells. We provide a link to our automatic cell counting tool that this dataset was used for here at the following Github link: https://github.com/tkataras/Automatic-Cell-Counting-with-TWS.

Apron Dataset

The Apron Dataset focuses on training and evaluating classification and detection models for airport-apron logistics. In addition to bounding boxes and object categories the dataset is enriched with meta parameters to quantify the models’ robustness against environmental influences.

AUT-VI

AUT-VI is a super-challenging visual inertial dataset with 126 diverse sequences in 17 locations. This dataset contains dynamic objects, challenging loop-closure/map-reuse, different lighting conditions, reflections, and sudden camera movements to cover all extreme navigation scenarios. Moreover, the Android application for data capture is released to the public to support ongoing development efforts. This dataset aims to exploit the remaining challenges in VIO algorithms, in the hope of improving them to facilitate navigation for visually impaired individuals in both indoor and outdoor settings.

BCSS

The BCSS dataset contains over 20,000 segmentation annotations of tissue regions from breast cancer images from The Cancer Genome Atlas (TCGA). This large-scale dataset was annotated through the collaborative effort of pathologists, pathology residents, and medical students using the Digital Slide Archive. It enables the generation of highly accurate machine-learning models for tissue segmentation.

BD-TypoSAT

On Sunday, August 29, 2021, Hurricane Ida struck parts of Louisiana and Mississippi with wind gusts reaching up to 172 mph, leaving more than a million customers without electricity, including the entire New Orleans area. During the disaster, Maxar captured high spatial resolution satellite imagery (at 0.4 m/pixel) and was subsequently made publicly available. The original images were segmented into 512*512-pixel patches to maintain spatial context while enabling detailed analysis. From this process, we generated a dataset of 2,135 triplets, each containing a pre-disaster image, a post-disaster image, and a manually annotated damage categorical mask.

출처: Papers with Code · CC BY-SA 4.0. 아카이브 자료와 새로 수집한 논문은 별도로 관리합니다.