Image Inpainting Using Directional Tensor Product Complex Tight Framelets
원문 초록
In this paper we are particularly interested in the image inpainting problem using directional complex tight wavelet frames. Under the assumption that frame coefficients of images are sparse, several iterative thresholding algorithms for the image inpainting problem have been proposed in the literature. The outputs of such iterative algorithms are closely linked to solutions of several convex minimization models using the balanced approach which simultaneously combines the $l_1$-regularization for sparsity of frame coefficients and the $l_2$-regularization for smoothness of the solution. Due to the redundancy of a tight frame, elements of a tight frame could be highly correlated and therefore, their corresponding frame coefficients of an image are expected to close to each other. This is called the grouping effect in statistics. In this paper, we establish the grouping effect property for frame-based convex minimization models using the balanced approach. This result on grouping effect partially explains the effectiveness of models using the balanced approach for several image restoration problems. Inspired by recent development on directional tensor product complex tight framelets (TP-CTFs) and their impressive performance for the image denoising problem, in this paper we propose an iterative thresholding algorithm using a single tight frame derived from TP-CTFs for the image inpainting problem. Experimental results show that our proposed algorithm can handle well both cartoons and textures simultaneously and performs comparably and often better than several well-known frame-based iterative thresholding algorithms for the image inpainting problem without noise. For the image inpainting problem with additive zero-mean i.i.d. Gaussian noise, our proposed algorithm using TP-CTFs performs superior than other known state-of-the-art frame-based image inpainting algorithms.
함께 살펴볼 논문
공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.
어텐션 마스킹, 잠재 공간 앵커링 및 정제를 통한 제로샷 객체 제거
Zero-Shot Object Removal via Attention Masking, Latent Anchoring, and Refinement
실제 이미지에서 객체를 제거하려면 마스크 내부에 그럴듯한 내용을 합성하는 것만으로는 부족하며, 방법은 잔여 객체 특징을 억제하고 편집되지 않은 장면을 보존한 뒤 주변 배경과 일관된 대체 내용을 생성해야 한다. 본 논문은 단계 기반 관점에서 객체 제거에 접근하며, 동결된 사전학습 Stable Diffusion 모델을 이용한 제약 잠재 공간 인페인팅(constrained latent inpainting)용 제로샷 프레임워크를 제안한다. 과제별 학습이나 모델 미세조정은 필요하지 않다. 이 방법은 SAM 기반 마스크 구성, BLIP 이미지-캡션 조건화, DDIM inversion, 배경 가중 마스크 null-text 최적화(NTI), 디코더 self-attention 마스킹, 마스크 외부 hard 잠재 공간 앵커링, 국소 renoise–denoise 정제를 하나의 통합 파이프라인에 결합한다. 정성적 사례, 정량적 국소 일관성 지표, ablation 연구로 평가하였다. 결과는 효과적인 객체 제거와 문맥상 일관된 대체 내용 생성을 보여준다. Ablation에 따르면 배경 가중 마스크 NTI는 구조적으로 복잡한 배경에서 특히 유리하며, NTI 없는 변형은 다른 평가 사례에서는 충분하다. 반복 정제는 1차 편집 이후 남는 객체 잔여물과 경계 아티팩트를 더 줄인다.
의료 영상 인페인팅에서의 확산 모델: 과제, 해결책 분류체계 및 향후 방향
Diffusion Models in Medical Image Inpainting: Challenges, Solution Taxonomy, and Future Directions
이미지 인페인팅은 가능한 한 시각적·의미적 일관성을 유지하면서 이미지의 누락되거나 손상된 영역을 복원하는 것을 목표로 한다. 의료 영상에서는 아티팩트, 정보 누락, 병리학적 변화가 진단 신뢰도와 하류 임상 응용을 저해할 수 있기 때문에 이 과제가 특히 중요하다. 최근 확산 모델(diffusion models)은 해부학적으로 일관된 복원을 생성할 수 있다는 점 때문에 의료 영상 인페인팅을 위한 최첨단 생성 접근법으로 부상했다. 본 서베이는 60편의 연구에 보고된 주요 아키텍처, 응용, 데이터셋, 평가 전략을 다루며 의료 영상 인페인팅을 위한 확산 기반 방법에 대한 체계적 검토를 제시한다. 또한 확산 기반 접근법에 대한 분류체계를 제안한다. 분석 결과, 확산 기반 의료 영상 인페인팅에 대한 연구 관심이 급격히 증가하고 있으며, 노이즈 제거 확산 확률 모델(denoising diffusion probabilistic models, DDPM)과 잠재 확산 모델(latent diffusion models, LDM)이 지배적인 아키텍처로 부상하고 있음을 보여준다. 검토된 연구들은 주로 아티팩트 제거, 데이터 증강, pseudo-healthy 조직 복원, 이상 탐지에 초점을 맞추며, 특히 자기공명영상(MRI)과 컴퓨터 단층촬영(CT) 영상에서 다루어진다. 전반적으로 확산 모델은 해부학적으로 그럴듯한 복원을 생성하고 하류 임상 과제를 지원하는 데 강력한 성능을 보여준다. 그러나 본 검토는 표준화된 벤치마크 부재, 제한된 데이터셋 다양성, 다양한 임상 응용 및 영상 시나리오 전반에 걸친 제한적인 검증 절차 등 중요한 과제도 강조한다.
Single Stage Adaptive Multi-Attention Network for Image Restoration
Image Restoration via Frequency Selection
SAR Image Despeckling Using Continuous Attention Module
From Simulated to Visual Data: A Robust Low-Rank Tensor Completion Approach using lp-Regression for Outlier Resistance
토론
이 논문과 연결된 포럼 글이 아직 없습니다.