Bilingual Lexicon Induction (BLI) is generally based on common domain data to obtain monolingual word embedding, and by aligning the monolingual word embeddings to obtain the cross-lingual embeddings which are used to get the word translation pairs. In this paper, we propose a new task of BLI, which is to use the monolingual corpus of the general domain and target domain to extract domain-specific bilingual dictionaries. Motivated by the ability of Pre-trained models, we propose a method to get better word embeddings that build on the recent work on BLI. This way, we introduce the Code Switch(Qin et al., 2020) firstly in the cross-domain BLI task, which can match differit is yet to be seen whether these methods are suitable for bilingual lexicon extraction in professional fields. As we can see in table 1, the classic and efficient BLI approach, Muse and Vecmap, perform much worse on the Medical dataset than on the Wiki dataset. On one hand, the specialized domain data set is relatively smaller compared to the generic domain data set generally, and specialized words have a lower frequency, which will directly affect the translation quality of bilingual dictionaries. On the other hand, static word embeddings are widely used for BLI, however, in some specific fields, the meaning of words is greatly influenced by context, in this case, using only static word embeddings may lead to greater bias. ent strategies in different contexts, making the model more suitable for this task. Experimental results show that our method can improve performances over robust BLI baselines on three specific domains by averagely improving 0.78 points.
Large language models (LLMs) demonstrate remarkable ability in cross-lingual tasks. Understanding how LLMs acquire this ability is crucial for their interpretability. To quantify the cross-lingual ability of LLMs accurately, we propose a Word-Level Cross-Lingual Translation Task. To find how LLMs learn cross-lingual ability, we trace the outputs of LLMs' intermediate layers in the word translation task. We identify and distinguish two distinct behaviors in the forward pass of LLMs: co-occurrence behavior and semantic pivot behavior. We attribute LLMs' two distinct behaviors to the co-occurrence frequency of words and find the semantic pivot from the pre-training dataset. Finally, to apply our findings to improve the cross-lingual ability of LLMs, we reconstruct a semantic pivot-aware pre-training dataset using documents with a high proportion of semantic pivots. Our experiments validate the effectiveness of our approach in enhancing cross-lingual ability. Our research contributes insights into the interpretability of LLMs and offers a method for improving LLMs' cross-lingual ability.
Recently, deep reasoning LLMs (e.g., OpenAI o1/o3 and DeepSeek-R1) have shown promising performance in various complex tasks. Free translation is an important and interesting task in the multilingual world, which requires going beyond word-for-word translation and taking cultural differences into account. This task is still under-explored in deep reasoning LLMs. In this paper, we introduce DeepTrans, a deep reasoning translation model that learns free translation via reinforcement learning. Specifically, we carefully build a reward model with pre-defined scoring criteria on both the translation results and the thought process. Given the source sentences, the reward model teaches the deep translation model how to think and free-translate them during reinforcement learning. In this way, training DeepTrans does not need any labeled translations, avoiding the human-intensive annotation or resource-intensive data synthesis. Experimental results show the effectiveness of DeepTrans. Using Qwen2.5-7B as the backbone, DeepTrans improves performance by 16.3% in literature translation, and outperforms strong deep reasoning baselines as well as baselines that are fine-tuned with synthesized data. Moreover, we summarize the failures and interesting findings during our RL exploration. We hope this work could inspire other researchers in free translation.
A central question in multilingual language modeling is whether large language models (LLMs) develop a universal concept representation, disentangled from specific languages. In this paper, we address this question by analyzing latent representations (latents) during a word translation task in transformer-based LLMs. We strategically extract latents from a source translation prompt and insert them into the forward pass on a target translation prompt. By doing so, we find that the output language is encoded in the latent at an earlier layer than the concept to be translated. Building on this insight, we conduct two key experiments. First, we demonstrate that we can change the concept without changing the language and vice versa through activation patching alone. Second, we show that patching with the mean over latents across different languages does not impair and instead improves the models' performance in translating the concept. Our results provide evidence for the existence of language-agnostic concept representations within the investigated models.
Translating text that contains entity names is a challenging task, as cultural-related references can vary significantly across languages. These variations may also be caused by transcreation, an adaptation process that entails more than transliteration and word-for-word translation. In this paper, we address the problem of cross-cultural translation on two fronts: (i) we introduce XC-Translate, the first large-scale, manually-created benchmark for machine translation that focuses on text that contains potentially culturally-nuanced entity names, and (ii) we propose KG-MT, a novel end-to-end method to integrate information from a multilingual knowledge graph into a neural machine translation model by leveraging a dense retrieval mechanism. Our experiments and analyses show that current machine translation systems and large language models still struggle to translate texts containing entity names, whereas KG-MT outperforms state-of-the-art approaches by a large margin, obtaining a 129% and 62% relative improvement compared to NLLB-200 and GPT-4, respectively.
Direct speech translation (ST) models often struggle with rare words. Incorrect translation of these words can have severe consequences, impacting translation quality and user trust. While rare word translation is inherently challenging for neural models due to sparse learning signals, real-world scenarios often allow access to translations of past recordings on similar topics. To leverage these valuable resources, we propose a retrieval-and-demonstration approach to enhance rare word translation accuracy in direct ST models. First, we adapt existing ST models to incorporate retrieved examples for rare word translation, which allows the model to benefit from prepended examples, similar to in-context learning. We then develop a cross-modal (speech-to-speech, speech-to-text, text-to-text) retriever to locate suitable examples. We demonstrate that standard ST models can be effectively adapted to leverage examples for rare word translation, improving rare word translation accuracy over the baseline by 17.6% with gold examples and 8.5% with retrieved examples. Moreover, our speech-to-speech retrieval approach outperforms other modalities and exhibits higher robustness to unseen speakers. Our code is publicly available (https://github.com/SiqiLii/Retrieve-and-Demonstration-ST).
In machine translation, rare words continue to be a problem for the dominant encoder-decoder architecture, especially in low-resource and out-of-domain translation settings. Human translators solve this problem with monolingual or bilingual dictionaries. In this paper, we propose appending definitions from a bilingual dictionary to source sentences and using attention masking to link together rare words with their definitions. We find that including definitions for rare words improves performance by up to 1.0 BLEU and 1.6 MacroF1.
Using crowdsourcing, we collected more than 10,000 URL pairs (parallel top page pairs) of bilingual websites that contain parallel documents and created a Japanese-Chinese parallel corpus of 4.6M sentence pairs from these websites. We used a Japanese-Chinese bilingual dictionary of 160K word pairs for document and sentence alignment. We then used high-quality 1.2M Japanese-Chinese sentence pairs to train a parallel corpus filter based on statistical language models and word translation probabilities. We compared the translation accuracy of the model trained on these 4.6M sentence pairs with that of the model trained on Japanese-Chinese sentence pairs from CCMatrix (12.4M), a parallel corpus from global web mining. Although our corpus is only one-third the size of CCMatrix, we found that the accuracy of the two models was comparable and confirmed that it is feasible to use crowdsourcing for web mining of parallel data.
The field of cross-lingual sentence embeddings has recently experienced significant advancements, but research concerning low-resource languages has lagged due to the scarcity of parallel corpora. This paper shows that cross-lingual word representation in low-resource languages is notably under-aligned with that in high-resource languages in current models. To address this, we introduce a novel framework that explicitly aligns words between English and eight low-resource languages, utilizing off-the-shelf word alignment models. This framework incorporates three primary training objectives: aligned word prediction and word translation ranking, along with the widely used translation ranking. We evaluate our approach through experiments on the bitext retrieval task, which demonstrate substantial improvements on sentence embeddings in low-resource languages. In addition, the competitive performance of the proposed model across a broader range of tasks in high-resource languages underscores its practicality.
Data scarcity in low-resource languages can be addressed with word-to-word translations from labeled task data in high-resource languages using bilingual lexicons. However, bilingual lexicons often have limited lexical overlap with task data, which results in poor translation coverage and lexicon utilization. We propose lexicon-conditioned data generation LexC-Gen, a method that generates low-resource-language classification task data at scale. Specifically, LexC-Gen first uses high-resource-language words from bilingual lexicons to generate lexicon-compatible task data, and then it translates them into low-resource languages with bilingual lexicons via word translation. Across 17 extremely low-resource languages, LexC-Gen generated data is competitive with expert-translated gold data, and yields on average 5.6 and 8.9 points improvement over existing lexicon-based word translation methods on sentiment analysis and topic classification tasks respectively. Through ablation study, we show that conditioning on bilingual lexicons is the key component of LexC-Gen. LexC-Gen serves as a potential solution to close the performance gap between open-source multilingual models, such as BLOOMZ and Aya-101, and state-of-the-art commercial models like GPT-4o on low-resource-language tasks.
Recent work has shown that, while large language models (LLMs) demonstrate strong word translation or bilingual lexicon induction (BLI) capabilities in few-shot setups, they still cannot match the performance of 'traditional' mapping-based approaches in the unsupervised scenario where no seed translation pairs are available, especially for lower-resource languages. To address this challenge with LLMs, we propose self-augmented in-context learning (SAIL) for unsupervised BLI: starting from a zero-shot prompt, SAIL iteratively induces a set of high-confidence word translation pairs for in-context learning (ICL) from an LLM, which it then reapplies to the same LLM in the ICL fashion. Our method shows substantial gains over zero-shot prompting of LLMs on two established BLI benchmarks spanning a wide range of language pairs, also outperforming mapping-based baselines across the board. In addition to achieving state-of-the-art unsupervised BLI performance, we also conduct comprehensive analyses on SAIL and discuss its limitations.
We address the task of American Sign Language fingerspelling translation using videos in the wild. We exploit advances in more accurate hand pose estimation and propose a novel architecture that leverages the transformer based encoder-decoder model enabling seamless contextual word translation. The translation model is augmented by a novel loss term that accurately predicts the length of the finger-spelled word, benefiting both training and inference. We also propose a novel two-stage inference approach that re-ranks the hypotheses using the language model capabilities of the decoder. Through extensive experiments, we demonstrate that our proposed method outperforms the state-of-the-art models on ChicagoFSWild and ChicagoFSWild+ achieving more than 10% relative improvement in performance. Our findings highlight the effectiveness of our approach and its potential to advance fingerspelling recognition in sign language translation. Code is also available at https://github.com/pooyafayyaz/Fingerspelling-PoseNet.
Bilingual Lexicon Induction (BLI), where words are translated between two languages, is an important NLP task. While noticeable progress on BLI in rich resource languages using static word embeddings has been achieved. The word translation performance can be further improved by incorporating information from contextualized word embeddings. In this paper, we introduce ProMap, a novel approach for BLI that leverages the power of prompting pretrained multilingual and multidialectal language models to address these challenges. To overcome the employment of subword tokens in these models, ProMap relies on an effective padded prompting of language models with a seed dictionary that achieves good performance when used independently. We also demonstrate the effectiveness of ProMap in re-ranking results from other BLI methods such as with aligned static word embeddings. When evaluated on both rich-resource and low-resource languages, ProMap consistently achieves state-of-the-art results. Furthermore, ProMap enables strong performance in few-shot scenarios (even with less than 10 training examples), making it a valuable tool for low-resource language translation. Overall, we believe our method offers both exciting and promising direction for BLI in general and low-resource languages in particular. ProMap code and data are available at \url{https://github.com/4mekki4/promap}.
Bilingual Lexicon Induction (BLI) is a core task in multilingual NLP that still, to a large extent, relies on calculating cross-lingual word representations. Inspired by the global paradigm shift in NLP towards Large Language Models (LLMs), we examine the potential of the latest generation of LLMs for the development of bilingual lexicons. We ask the following research question: Is it possible to prompt and fine-tune multilingual LLMs (mLLMs) for BLI, and how does this approach compare against and complement current BLI approaches? To this end, we systematically study 1) zero-shot prompting for unsupervised BLI and 2) few-shot in-context prompting with a set of seed translation pairs, both without any LLM fine-tuning, as well as 3) standard BLI-oriented fine-tuning of smaller LLMs. We experiment with 18 open-source text-to-text mLLMs of different sizes (from 0.3B to 13B parameters) on two standard BLI benchmarks covering a range of typologically diverse languages. Our work is the first to demonstrate strong BLI capabilities of text-to-text mLLMs. The results reveal that few-shot prompting with in-context examples from nearest neighbours achieves the best performance, establishing new state-of-the-art BLI scores for many language pairs. We also conduct a series of in-depth analyses and ablation studies, providing more insights on BLI with (m)LLMs, also along with their limitations.
Training monolingual language models for low and mid-resource languages is made challenging by limited and often inadequate pretraining data. In this study, we propose a novel model conversion strategy to address this issue, adapting high-resources monolingual language models to a new target language. By generalizing over a word translation dictionary encompassing both the source and target languages, we map tokens from the target tokenizer to semantically similar tokens from the source language tokenizer. This one-to-many token mapping improves tremendously the initialization of the embedding table for the target language. We conduct experiments to convert high-resource models to mid- and low-resource languages, namely Dutch and Frisian. These converted models achieve a new state-of-the-art performance on these languages across all sorts of downstream tasks. By reducing significantly the amount of data and time required for training state-of-the-art models, our novel model conversion strategy has the potential to benefit many languages worldwide.
In the human activity of word translation, two languages face each other, mutually searching their own language system for the semantic place of words in the other language. We discover the huge network formed by the chain of these mutual translations as Word Translation Network, a network where words are nodes, and translation volume is represented as edges, and propose Media of Langue, a novel interface for exploring this network. Media of Langue points to the semantic configurations of many words in multiple languages at once, containing the information of existing dictionaries such as bilingual and synonym dictionaries. We have also implemented and published this interface as a web application, focusing on seven language pairs. This paper first defines the Word Translation Network and describes how to actually construct the network from bilingual corpora, followed by an analysis of the properties of the network. Next, we explain how to design a Media of Langue using the Word Translation Network, and finally, we analyze the features of the Media of Langue as a dictionary. Our website is https://www.media-of-langue.org .
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project – the Soundscape Attributes Translation Project (SATP) – that involves the translation of the same eight Perceived Affective Qualities (PAQs) into different languages through standard procedures. The structure of the paper reflects two separate moments of data collection and analysis. In the first part, the work done outlines the translation process and the resulting Portuguese-language expressions for the eight PAQs. The translation used a mixed-method approach that involved expert panels and online questionnaires. The second part of the paper outlines the impact of cultural and linguistic factors on soundscape perception and evaluation. This assessment analyzed how Portuguese speakers perceive the eight PAQs of the SATP project and compared it with the results of the English speakers. Additionally, investigations occurred on the differences between the perception of European Portuguese and Brazilian Portuguese speakers. The study found differences in how individuals from Portuguese-speaking countries describe sounds compared to the original English circumplex soundscape model. The Vibrant, Monotonous, Annoying, and Chaotic PAQs did not correlate as in the original English model, indicating the need for further investigation. However, the Pleasant and Calm PAQs had no issues in all analyses and shall remain with their initial translations. These findings have important implications for soundscape developments related to standardization tools, research methods, and test design in Portuguese-speaking contexts, as well as contributions to the growing body of knowledge on the role of culture and language in soundscape perception and evaluation.
The use of questionnaires for soundscape evaluation is a key aspect of soundscape research. Since standards and protocols mainly exist in English, using an appropriate translation and cross-cultural adaptation (CCA) methodology is necessary to maintain content equivalence between source and target language. However, many examples can be found in the literature where no appropriate methodology was applied. This study addresses the neglected aspect of the translation and CCA process in soundscape research by selecting, applying and evaluating an appropriate methodology. After a survey of the relevant literature, an approach based on a combined technique of the forward translation, synthesis, back translation, pre-test and a committee approach was selected. Additional translation guidelines drawn from the literature are suggested and implemented. For the case study of the Greek translation of ISO/TS 12913–2:2018 attributes (Method A), the steps of the methodology were applied by four independent translation groups with different compositions according to the biculturalism and bilingualism of the group members. A method for categorization of bilinguals according to the literature is proposed. In order to compare and validate the results, translated and original attributes were used in listening tests with Greek and English participants respectively, and principal component analysis (PCA) was applied. The most important findings of this research are: the results of the bicultural translation group were closer to the PCA results of the English participants for every attribute, translation of bilingual groups may not be always sufficient, translation errors may be misinterpreted for cross-cultural differences without proper application of a translation methodology and the process of back translation can be effective, especially in cases where there are not corresponding words in the target language. Finally, PCA can be used as a validation methodology for comparison of different translations.
Large Language Models are designed to understand complex Human Language. Yet, Understanding of animal language has long intrigued researchers striving to bridge the communication gap between humans and other species. This research paper introduces a novel approach that draws inspiration from the linguistic concepts found in the Quran, a revealed Holy Arabic scripture dating back 1400 years. By exploring the linguistic structure of the Quran, specifically the components of ism, fil, and harf, we aim to unlock the underlying intentions and meanings embedded within animal conversations using audio data. To unravel the intricate complexities of animal language, we employ word embedding techniques to analyze each distinct frequency component. This methodology enables the identification of potential correlations and the extraction of meaningful insights from the data. Furthermore, we leverage a bioacoustics model to generate audio, which serves as a valuable resource for training natural language processing (NLP) techniques. This Paper aims to find the intention* behind animal language rather than having each word translation.
While OCR has been used in various applications, its output is not always accurate, leading to misfit words. This research work focuses on improving the optical character recognition (OCR) with ML techniques with integration of OCR with long short-term memory (LSTM) based sequence to sequence deep learning models to perform document translation. This work is based on ANKI dataset for English to Spanish translation. In this work, I have shown comparative study for pre-trained OCR while using deep learning model using LSTM-based seq2seq architecture with attention for machine translation. End-to-end performance of the model has been expressed in BLEU-4 score. This research paper is aimed at researchers and practitioners interested in OCR and its applications in document translation.