This paper presents a computationally efficient method for vehicle speed estimation from traffic camera footage. Building upon previous work that utilizes 3D bounding boxes derived from 2D detections and vanishing point geometry, we introduce several improvements to enhance real-time performance. We evaluate our method in several variants on the BrnoCompSpeed dataset in terms of vehicle detection and speed estimation accuracy. Our extensive evaluation across various hardware platforms, including edge devices, demonstrates significant gains in frames per second (FPS) compared to the prior state-of-the-art, while maintaining comparable or improved speed estimation accuracy. We analyze the trade-off between accuracy and computational cost, showing that smaller models utilizing post-training quantization offer the best balance for real-world deployment. Our best performing model beats previous state-of-the-art in terms of median vehicle speed estimation error (0.58 km/h vs. 0.60 km/h), detection precision (91.02% vs 87.08%) and recall (91.14% vs. 83.32%) while also being 5.5 times faster.
This project explores the application of advanced machine learning models, specifically Long Short-Term Memory (LSTM), Gated Recurrent Units (GRU), and Transformers, to the task of vehicle speed estimation using video data. Traditional methods of speed estimation, such as radar and manual systems, are often constrained by high costs, limited coverage, and potential disruptions. In contrast, leveraging existing surveillance infrastructure and cutting-edge neural network architectures presents a non-intrusive, scalable solution. Our approach utilizes LSTM and GRU to effectively manage long-term dependencies within the temporal sequence of video frames, while Transformers are employed to harness their self-attention mechanisms, enabling the processing of entire sequences in parallel and focusing on the most informative segments of the data. This study demonstrates that both LSTM and GRU outperform basic Recurrent Neural Networks (RNNs) due to their advanced gating mechanisms. Furthermore, increasing the sequence length of input data consistently improves model accuracy, highlighting the importance of contextual information in dynamic environments. Transformers, in particular, show exceptional adaptability and robustness across varied sequence lengths and complexities, making them highly suitable for real-time applications in diverse traffic conditions. The findings suggest that integrating these sophisticated neural network models can significantly enhance the accuracy and reliability of automated speed detection systems, thus promising to revolutionize traffic management and road safety.
Road accidents are quite common in almost every part of the world, and, in majority, fatal accidents are attributed to over speeding of vehicles. The tendency to over speeding is usually tried to be controlled using check points at various parts of the road but not all traffic police have the device to check speed with existing speed estimating devices such as LIDAR based, or Radar based guns. The current project tries to address the issue of vehicle speed estimation with handheld devices such as mobile phones or wearable cameras with network connection to estimate the speed using deep learning frameworks.
In order to ensure traffic safety through a reduction in fatalities and accidents, vehicle speed detection is essential. Relentless driving practices are discouraged by the enforcement of speed restrictions, which are made possible by accurate monitoring of vehicle speeds. Road accidents remain one of the leading causes of death in Bangladesh. The Bangladesh Passenger Welfare Association stated in 2023 that 7,902 individuals lost their lives in traffic accidents during the course of the year. Efficient vehicle speed detection is essential to maintaining traffic safety. Reliable speed detection can also help gather important traffic data, which makes it easier to optimize traffic flow and provide safer road infrastructure. The YOLOv8 model can recognize and track cars in videos with greater speed and accuracy when trained under close supervision. By providing insights into the application of supervised learning in object identification for vehicle speed estimation and concentrating on the particular traffic conditions and safety concerns in Bangladesh, this work represents a noteworthy contribution to the area. The MAE was 3.5 and RMSE was 4.22 between the predicted speed of our model and the actual speed or the ground truth measured by the speedometer Promising increased efficiency and wider applicability in a variety of traffic conditions, the suggested solution offers a financially viable substitute for conventional approaches.
Estimating the speed of vehicles using traffic cameras is a crucial task for traffic surveillance and management, enabling more optimal traffic flow, improved road safety, and lower environmental impact. Transportation-dependent systems, such as for navigation and logistics, have great potential to benefit from reliable speed estimation. While there is prior research in this area reporting competitive accuracy levels, their solutions lack reproducibility and robustness across different datasets. To address this, we provide a novel framework for automatic real-time vehicle speed calculation, which copes with more diverse data from publicly available traffic cameras to achieve greater robustness. Our model employs novel techniques to estimate the length of road segments via depth map prediction. Additionally, our framework is capable of handling realistic conditions such as camera movements and different video stream inputs automatically. We compare our model to three well-known models in the field using their benchmark datasets. While our model does not set a new state of the art regarding prediction performance, the results are competitive on realistic CCTV videos. At the same time, our end-to-end pipeline offers more consistent results, an easier implementation, and better compatibility. Its modular structure facilitates reproducibility and future improvements.
Speed estimation of an ego vehicle is crucial to enable autonomous driving and advanced driver assistance technologies. Due to functional and legacy issues, conventional methods depend on in-car sensors to extract vehicle speed through the Controller Area Network bus. However, it is desirable to have modular systems that are not susceptible to external sensors to execute perception tasks. In this paper, we propose a novel 3D-CNN with masked-attention architecture to estimate ego vehicle speed using a single front-facing monocular camera. To demonstrate the effectiveness of our method, we conduct experiments on two publicly available datasets, nuImages and KITTI. We also demonstrate the efficacy of masked-attention by comparing our method with a traditional 3D-CNN.
Accurate speed estimation of road vehicles is important for several reasons. One is speed limit enforcement, which represents a crucial tool in decreasing traffic accidents and fatalities. Compared with other research areas and domains, the number of available datasets for vehicle speed estimation is still very limited. We present a dataset of on-road audio-video recordings of single vehicles passing by a camera at known speeds, maintained stable by the on-board cruise control. The dataset contains thirteen vehicles, selected to be as diverse as possible in terms of manufacturer, production year, engine type, power and transmission, resulting in a total of $ 400 $ annotated audio-video recordings. The dataset is fully available and intended as a public benchmark to facilitate research in audio-video vehicle speed estimation. In addition to the dataset, we propose a cross-validation strategy which can be used in a machine learning model for vehicle speed estimation. Two approaches to training-validation split of the dataset are proposed.
The use of cameras for vehicle speed measurement is much more cost effective compared to other technologies such as inductive loops, radar or laser. However, accurate speed measurement remains a challenge due to the inherent limitations of cameras to provide accurate range estimates. In addition, classical vision-based methods are very sensitive to extrinsic calibration between the camera and the road. In this context, the use of data-driven approaches appears as an interesting alternative. However, data collection requires a complex and costly setup to record videos under real traffic conditions from the camera synchronized with a high-precision speed sensor to generate the ground truth speed values. It has recently been demonstrated that the use of driving simulators (e.g., CARLA) can serve as a robust alternative for generating large synthetic datasets to enable the application of deep learning techniques for vehicle speed estimation for a single camera. In this paper, we study the same problem using multiple cameras in different virtual locations and with different extrinsic parameters. We address the question of whether complex 3D-CNN architectures are capable of implicitly learning view-invariant speeds using a single model, or whether view-specific models are more appropriate. The results are very promising as they show that a single model with data from multiple views reports even better accuracy than camera-specific models, paving the way towards a view-invariant vehicle speed measurement system.
We consider improving the performance of a recently proposed sound-based vehicle speed estimation method. In the original method, an intermediate feature, referred to as the modified attenuation (MA), has been proposed for both vehicle detection and speed estimation. The MA feature maximizes at the instant of the vehicle's closest point of approach, which represents a training label extracted from video recording of the vehicle's pass by. In this paper, we show that the original labeling approach is suboptimal and propose a method for label correction. The method is tested on the VS10 dataset, which contains 304 audio-video recordings of ten different vehicles. The results show that the proposed label correction method reduces average speed estimation error from 7.39 km/h to 6.92 km/h. If the speed is discretized into 10 km/h classes, the accuracy of correct class prediction is improved from 53.2% to 53.8%, whereas when tolerance of one class offset is allowed, accuracy is improved from 93.4% to 94.3%.
The paper addresses acoustic vehicle detection and speed estimation from single sensor measurements. We predict the vehicle's pass-by instant by minimizing clipped vehicle-to-microphone distance, which is predicted from the mel-spectrogram of input audio, in a supervised learning approach. In addition, mel-spectrogram-based features are used directly for vehicle speed estimation, without introducing any intermediate features. The results show that the proposed features can be used for accurate vehicle detection and speed estimation, with an average error of 7.87 km/h. If we formulate speed estimation as a classification problem, with a 10 km/h discretization interval, the proposed method attains the average accuracy of 48.7% for correct class prediction and 91.0% when an offset of one class is allowed. The proposed method is evaluated on a dataset of 304 urban-environment on-field recordings of ten different vehicles.
Detection and tracking of vehicles captured by traffic surveillance cameras is a key component of intelligent traffic systems. In this paper a novel method of detecting 3D bounding boxes of vehicles is presented. Using the known geometry of the surveilled scene, we propose an algorithm to construct a perspective transformation. The transformation enables us to simplify the problem of detecting 3D bounding boxes to detecting 2D bounding boxes with one additional parameter. We can therefore utilize modified 2D object detectors based on deep convolutional networks to detect 3D bounding boxes of vehicles. Known 3D bounding boxes of vehicles can be utilized to improve results on tasks such as fine-grained vehicle classification or vehicle re-identification. We test the accuracy of our detector by comparing the accuracy of speed measurement on the BrnoCompSpeed dataset with the existing state of the art method. Our method decreases the mean error in speed measurement by 22 % (1.10 km/h to 0.86 km/h) and the median error in speed measurement by 33 % (0.97 km/h to 0.65 km/h mean), while also increasing the recall (83.3 % to 89.3 %).
The need to accurately estimate the speed of road vehicles is becoming increasingly important for at least two main reasons. First, the number of speed cameras installed worldwide has been growing in recent years, as the introduction and enforcement of appropriate speed limits is considered one of the most effective means to increase the road safety. Second, traffic monitoring and forecasting in road networks plays a fundamental role to enhance traffic, emissions and energy consumption in smart cities, being the speed of the vehicles one of the most relevant parameters of the traffic state. Among the technologies available for the accurate detection of vehicle speed, the use of vision-based systems brings great challenges to be solved, but also great potential advantages, such as the drastic reduction of costs due to the absence of expensive range sensors, and the possibility of identifying vehicles accurately. This paper provides a review of vision-based vehicle speed estimation. We describe the terminology, the application domains, and propose a complete taxonomy of a large selection of works that categorizes all stages involved. An overview of performance evaluation metrics and available datasets is provided. Finally, we discuss current limitations and future directions.
Connected vehicles (CVs) have situational awareness that can be exploited for control and optimization of the powertrain system. While extensive studies have been carried out for energy efficiency improvement of CVs via eco-driving and planning, the implication of such technologies on the thermal responses of CVs has not been fully investigated. One of the key challenges in leveraging connectivity for optimization-based thermal management of CVs is the relatively slow thermal dynamics, which necessitate the use of a long prediction horizon to achieve the best performance. Long-term prediction of the CV speed, unlike the V2V/V2I-based short-range prediction, is difficult and error-prone. The multiple timescales inherent to power and thermal systems call for a variable timescale optimization framework with access to short- and long-term vehicle speed preview. To this end, a model predictive controller (MPC) with a multi-range speed preview for integrated power and thermal management (iPTM) of connected hybrid electric vehicles (HEVs) is presented in this paper. The MPC is formulated to manage the power-split between the engine and the battery while enforcing the power and thermal (engine coolant and catalytic converter temperatures) constraints. The MPC exploits prediction and optimization over a shorter receding horizon and longer shrinking horizon. Over the longer shrinking horizon, the vehicle speed estimation is based on the data collected from the connected vehicles traveling on the same route as the ego-vehicle. Simulation results of applying the MPC over real-world urban driving cycles in Ann Arbor, MI are presented to demonstrate the effectiveness and fuel-saving potentials of the proposed iPTM strategy under the uncertainty associated with long-term predictions of the CV's speed.
Detection and tracking of vehicles captured by traffic surveillance cameras is a key component of intelligent transportation systems. We present an improved version of our algorithm for detection of 3D bounding boxes of vehicles, their tracking and subsequent speed estimation. Our algorithm utilizes the known geometry of vanishing points in the surveilled scene to construct a perspective transformation. The transformation enables an intuitive simplification of the problem of detecting 3D bounding boxes to detection of 2D bounding boxes with one additional parameter using a standard 2D object detector. Main contribution of this paper is an improved construction of the perspective transformation which is more robust and fully automatic and an extended experimental evaluation of speed estimation. We test our algorithm on the speed estimation task of the BrnoCompSpeed dataset. We evaluate our approach with different configurations to gauge the relationship between accuracy and computational costs and benefits of 3D bounding box detection over 2D detection. All of the tested configurations run in real-time and are fully automatic. Compared to other published state-of-the-art fully automatic results our algorithm reduces the mean absolute speed measurement error by 32% (1.10 km/h to 0.75 km/h) and the absolute median error by 40% (0.97 km/h to 0.58 km/h).
In this technical report we investigate speed estimation of the ego-vehicle on the KITTI benchmark using state-of-the-art deep neural network based optical flow and single-view depth prediction methods. Using a straightforward intuitive approach and approximating a single scale factor, we evaluate several application schemes of the deep networks and formulate meaningful conclusions such as: combining depth information with optical flow improves speed estimation accuracy as opposed to using optical flow alone; the quality of the deep neural network methods influences speed estimation performance; using the depth and optical flow results from smaller crops of wide images degrades performance. With these observations in mind, we achieve a RMSE of less than 1 m/s for vehicle speed estimation using monocular images as input from recordings of the KITTI benchmark. Limitations and possible future directions are discussed as well.
In this paper, we focus on fully automatic traffic surveillance camera calibration, which we use for speed measurement of passing vehicles. We improve over a recent state-of-the-art camera calibration method for traffic surveillance based on two detected vanishing points. More importantly, we propose a novel automatic scene scale inference method. The method is based on matching bounding boxes of rendered 3D models of vehicles with detected bounding boxes in the image. The proposed method can be used from arbitrary viewpoints, since it has no constraints on camera placement. We evaluate our method on the recent comprehensive dataset for speed measurement BrnoCompSpeed. Experiments show that our automatic camera calibration method by detection of two vanishing points reduces error by 50% (mean distance ratio error reduced from 0.18 to 0.09) compared to the previous state-of-the-art method. We also show that our scene scale inference method is more precise, outperforming both state-of-the-art automatic calibration method for speed measurement (error reduction by 86% -- 7.98km/h to 1.10km/h) and manual calibration (error reduction by 19% -- 1.35km/h to 1.10km/h). We also present qualitative results of the proposed automatic camera calibration method on video sequences obtained from real surveillance cameras in various places, and under different lighting conditions (night, dawn, day).