This article aims to cover pupillography, and its potential use in a number of ophthalmological diagnostic applications in biomedical space. With the ever-increasing incorporation of technology within our daily lives and an ever-growing active research into smart devices and technologies, we try to make a case for a health ecosystem that revolves around continuous eye monitoring. We tend to summarize the design constraints & requirements for an IoT-based continuous pupil detection system, with an attempt at developing a pipeline for wearable pupillographic device, while comparing two compact mini-camera modules currently available in the market. We use a light algorithm that can be directly adopted to current micro-controllers, and share our results for different lighting conditions, and scenarios. Lastly, we present our findings, along with an analysis on the challenges faced and a way ahead towards successfully building this ecosystem.
This paper introduces a neuromorphic methodology for eye tracking, harnessing pure event data captured by a Dynamic Vision Sensor (DVS) camera. The framework integrates a directly trained Spiking Neuron Network (SNN) regression model and leverages a state-of-the-art low power edge neuromorphic processor - Speck, collectively aiming to advance the precision and efficiency of eye-tracking systems. First, we introduce a representative event-based eye-tracking dataset, "Ini-30", which was collected with two glass-mounted DVS cameras from thirty volunteers. Then,a SNN model, based on Integrate And Fire (IAF) neurons, named "Retina", is described , featuring only 64k parameters (6.63x fewer than the latest) and achieving pupil tracking error of only 3.24 pixels in a 64x64 DVS input. The continous regression output is obtained by means of convolution using a non-spiking temporal 1D filter slided across the output spiking layer. Finally, we evaluate Retina on the neuromorphic processor, showing an end-to-end power between 2.89-4.8 mW and a latency of 5.57-8.01 mS dependent on the time window. We also benchmark our model against the latest event-based eye-tracking method, "3ET", which was built upon event frames. Results show that Retina achieves superior precision with 1.24px less pupil centroid error and reduced computational complexity with 35 times fewer MAC operations. We hope this work will open avenues for further investigation of close-loop neuromorphic solutions and true event-based training pursuing edge performance.
Latest developments in computer hardware, sensor technologies, and artificial intelligence can make virtual reality (VR) and virtual spaces an important part of human everyday life. Eye tracking offers not only a hands-free way of interaction but also the possibility of a deeper understanding of human visual attention and cognitive processes in VR. Despite these possibilities, eye-tracking data also reveal privacy-sensitive attributes of users when it is combined with the information about the presented stimulus. To address these possibilities and potential privacy issues, in this survey, we first cover major works in eye tracking, VR, and privacy areas between the years 2012 and 2022. While eye tracking in the VR part covers the complete pipeline of eye-tracking methodology from pupil detection and gaze estimation to offline use and analyses, as for privacy and security, we focus on eye-based authentication as well as computational methods to preserve the privacy of individuals and their eye-tracking data in VR. Later, taking all into consideration, we draw three main directions for the research community by mainly focusing on privacy challenges. In summary, this survey provides an extensive literature review of the utmost possibilities with eye tracking in VR and the privacy implications of those possibilities.
Wearable pupil detection systems often separate the analysis of the captured wearer's eye images for wirelessly-tethered back-end systems. We argue in this paper that investigating hardware-software co-designs would bring along opportunities to make such systems smaller and more efficient. We introduce an open-source embedded system for wearable, non-invasive pupil detection in real-time, on the wearable, embedded platform itself. Our system consists of a head-mounted eye tracker prototype, which combines two miniature camera systems with Raspberry Pi-based embedded system. Apart from the hardware design, we also contribute a pupil detection pipeline that operates using edge analysis, natively on the embedded system at 30fps and run-time of 54ms at 480x640 and 23ms at 240x320. Average cumulative error of 5.3368px is found on the LPW dataset for a detection rate of 51.9\% with our detection pipeline. For evaluation on our hardware-specific camera frames, we also contribute a dataset of 35000 images, from 20 participants.
In this paper we present a new approach for pupil segmentation. It can be computed and trained very efficiently, making it ideal for online use for high speed eye trackers as well as for energy saving pupil detection in mobile eye tracking. The approach is inspired by the BORE and CBF algorithms and generalizes the binary comparison by Haar features. Since these features are intrinsically very susceptible to noise and fluctuating light conditions, we combine them with conditional pupil shape probabilities. In addition, we also rank each feature according to its importance in determining the pupil shape. Another advantage of our method is the use of statistical learning, which is very efficient and can even be used online. https://atreus.informatik.uni-tuebingen.de/seafile/d/8e2ab8c3fdd444e1a135/?p=%2FStatsPupil&mode=list
In this paper, we are interested in iris biometric applications. More precisely, our contribution consists in designing both a pupil detection and a tracking procedure from video sequences acquired by low-cost webcams. The novelty of our approach relies on the fact that it is operational even with a minimal user cooperation and, under bad illuminations and acquisition conditions. A robust classification algorithm is designed to detect the pupil. Moreover, a pupil tracker based on the extended Kalman filter is applied in order to reduce the processing time. Experimental results are performed in order to evaluate the performances of the proposed detection and tracking system
Video-based eye trackers estimate gaze based on eye images/videos. As security and privacy concerns loom over technological advancements, tackling such challenges is crucial. We present a new approach to handle privacy issues in eye videos by replacing the current identifiable iris texture with a different iris template in the video capture pipeline based on the Rubber Sheet Model. We extend to image blending and median-value representations to demonstrate that videos can be manipulated without significantly degrading segmentation and pupil detection accuracy.
Commercial head-mounted eye trackers provide useful features to customers in industry and research but are expensive and rely on closed source hardware and software. This limits the application areas and use of mobile eye tracking to expert users and inhibits user-driven development, customisation, and extension. In this paper we present Pupil -- an accessible, affordable, and extensible open source platform for mobile eye tracking and gaze-based interaction. Pupil comprises 1) a light-weight headset with high-resolution cameras, 2) an open source software framework for mobile eye tracking, as well as 3) a graphical user interface (GUI) to playback and visualize video and gaze data. Pupil features high-resolution scene and eye cameras for monocular and binocular gaze estimation. The software and GUI are platform-independent and include state-of-the-art algorithms for real-time pupil detection and tracking, calibration, and accurate gaze estimation. Results of a performance evaluation show that Pupil can provide an average gaze estimation accuracy of 0.6 degree of visual angle (0.08 degree precision) with a latency of the processing pipeline of only 0.045 seconds.
We present labelled pupils in the wild (LPW), a novel dataset of 66 high-quality, high-speed eye region videos for the development and evaluation of pupil detection algorithms. The videos in our dataset were recorded from 22 participants in everyday locations at about 95 FPS using a state-of-the-art dark-pupil head-mounted eye tracker. They cover people with different ethnicities, a diverse set of everyday indoor and outdoor illumination environments, as well as natural gaze direction distributions. The dataset also includes participants wearing glasses, contact lenses, as well as make-up. We benchmark five state-of-the-art pupil detection algorithms on our dataset with respect to robustness and accuracy. We further study the influence of image resolution, vision aids, as well as recording location (indoor, outdoor) on pupil detection performance. Our evaluations provide valuable insights into the general pupil detection problem and allow us to identify key challenges for robust pupil detection on head-mounted eye trackers.
Fast and robust pupil detection is an essential prerequisite for video-based eye-tracking in real-world settings. Several algorithms for image-based pupil detection have been proposed, their applicability is mostly limited to laboratory conditions. In realworld scenarios, automated pupil detection has to face various challenges, such as illumination changes, reflections (on glasses), make-up, non-centered eye recording, and physiological eye characteristics. We propose ElSe, a novel algorithm based on ellipse evaluation of a filtered edge image. We aim at a robust, resource-saving approach that can be integrated in embedded architectures e.g. driving. The proposed algorithm was evaluated against four state-of-the-art methods on over 93,000 hand-labeled images from which 55,000 are new images contributed by this work. On average, the proposed method achieved a 14.53% improvement on the detection rate relative to the best state-of-the-art performer. download:ftp:[email omitted]. de (password:eyedata).
Real-time, accurate, and robust pupil detection is an essential prerequisite for pervasive video-based eye-tracking. However, automated pupil detection in real-world scenarios has proven to be an intricate challenge due to fast illumination changes, pupil occlusion, non centered and off-axis eye recording, and physiological eye characteristics. In this paper, we propose and evaluate a method based on a novel dual convolutional neural network pipeline. In its first stage the pipeline performs coarse pupil position identification using a convolutional neural network and subregions from a downscaled input image to decrease computational costs. Using subregions derived from a small window around the initial pupil position estimate, the second pipeline stage employs another convolutional neural network to refine this position, resulting in an increased pupil detection rate up to 25% in comparison with the best performing state-of-the-art algorithm. Annotated data sets can be made available upon request.
Video-based eye tracking is a valuable technique in various research fields. Numerous open-source eye tracking algorithms have been developed in recent years, primarily designed for general application with many different camera types. These algorithms do not, however, capitalize on the high frame rate of eye tracking cameras often employed in psychophysical studies. We present a pupil detection method that utilizes this high-speed property to obtain reliable predictions through recursive estimation about certain pupil characteristics in successive camera frames. These predictions are subsequently used to carry out novel image segmentation and classification routines to improve pupil detection performance. Based on results from hand-labelled eye images, our approach was found to have a greater detection rate, accuracy and speed compared to other recently published open-source pupil detection algorithms. The program's source code, together with a graphical user interface, can be downloaded at https://github.com/tbrouns/eyestalker
Real-time, accurate, and robust pupil detection is an essential prerequisite for pervasive video-based eye-tracking. However, automated pupil detection in realworld scenarios has proven to be an intricate challenge due to fast illumination changes, pupil occlusion, non-centered and off-axis eye recording, as well as physiological eye characteristics. In this paper, we approach this challenge through: I) a convolutional neural network (CNN) running in real time on a single core, II) a novel computational intensive two stage CNN for accuracy improvement, and III) a fast propability distribution based refinement method as a practical alternative to II. We evaluate the proposed approaches against the state-of-the-art pupil detection algorithms, improving the detection rate up to ~9% percent points on average over all data sets (~7% on one CPU core 7ms). This evaluation was performed on over 135,000 images: 94,000 images from the literature, and 41,000 new hand-labeled and challenging images contributed by this work (v1.0).
Real-time, accurate, and robust pupil detection is an essential prerequisite to enable pervasive eye-tracking and its applications -- e.g., gaze-based human computer interaction, health monitoring, foveated rendering, and advanced driver assistance. However, automated pupil detection has proved to be an intricate task in real-world scenarios due to a large mixture of challenges such as quickly changing illumination and occlusions. In this paper, we introduce the Pupil Reconstructor PuRe, a method for pupil detection in pervasive scenarios based on a novel edge segment selection and conditional segment combination schemes; the method also includes a confidence measure for the detected pupil. The proposed method was evaluated on over 316,000 images acquired with four distinct head-mounted eye tracking devices. Results show a pupil detection rate improvement of over 10 percentage points w.r.t. state-of-the-art algorithms in the two most challenging data sets (6.46 for all data sets), further pushing the envelope for pupil detection. Moreover, we advance the evaluation protocol of pupil detection algorithms by also considering eye images in which pupils are not present. In this aspect, PuRe improved precision and specificity w.r.t. state-of-the-art algorithms by 25.05 and 10.94 percentage points, respectively, demonstrating the meaningfulness of PuRe's confidence measure. PuRe operates in real-time for modern eye trackers (at 120 fps).
Pupil tracking is an important branch of object tracking which require high precision. We investigate head mounted pupil tracking which is often more convenient and precise than remote pupil tracking, but also more challenging. When pupil tracking suffers from noise like bad illumination, detection precision dramatically decreases. Due to the appearance of head mounted recording device and public benchmark image datasets, head mounted tracking algorithms have become easier to design and evaluate. In this paper, we propose a robust head mounted pupil detection algorithm which uses a Convolutional Neural Network (CNN) to combine different features of pupil. Here we consider three features of pupil. Firstly, we use three pupil feature-based algorithms to find pupil center independently. Secondly, we use a CNN to evaluate the quality of each result. Finally, we select the best result as output. The experimental results show that our proposed algorithm performs better than the present state-of-art.