The problems that tobacco workshops encounter include poor curing, inconsistencies in supplies, irregular scheduling, and a lack of oversight, all of which drive up expenses and worse quality. Large quantities make manual examination costly, sluggish, and unreliable. Deep convolutional neural networks have recently made strides in capabilities that transcend those of conventional methods. To effectively enhance them, nevertheless, extensive customization is needed to account for subtle variations in tobacco grade. This study introduces InspectionV3, an integrated solution for automated flue-cured tobacco grading that makes use of a customized deep convolutional neural network architecture. A scope that covers color, maturity, and curing subtleties is established via a labelled dataset consisting of 21,113 images spanning 20 quality classes. Expert annotators performed preprocessing on the tobacco leaf images, including cleaning, labelling, and augmentation. Multi-layer CNN factors use batch normalization to describe domain properties like as permeability and moisture spots, and so account for the subtleties of the workshop. Its expertise lies in converting visual patterns into useful information for enhancing workflow. Fast notifications are made possible by real-time, on-the-spot grading that matches human expertise. Images-powered analytics dashboards facilitate the tracking of yield projections, inventories, bottlenecks, and the optimization of data-driven choices. More labelled images are assimilated after further retraining, improving representational capacities and enabling adaptations for seasonal variability. Metrics demonstrate 97% accuracy, 95% precision and recall, 96% F1-score and AUC, 95% specificity; validating real-world viability.
In order to improve energy utilization and reduce carbon emissions, this paper presents a comprehensive energy system economic operation strategy of Incineration power plant Power-to-gas (P2G) with waste heat recovery. First, consider the coordinated operation of Incineration power plant - P2G, introduce the refined Power-to-gas two-stage operation process, add Hydrogen fuel cells on the basis of traditional Power-to-gas to reduce the energy ladder loss, and recycle the Methanation reaction heat; Secondly, in order to improve the energy utilization efficiency of Incineration, it is considered to install a waste heat recovery device containing a water source heat pump to recover the waste heat of flue gas and consume some electric energy, sourced from wind power, and add a CO2 separation device to combine the recovered CO2 with P2G to synthesize CH4 to achieve carbon recycling. Finally, within the framework of a tiered carbon trading mechanism an IES optimization model for electricity-heat with the goal of minimizing the system operating cost is constructed, and the GUROBI modeling optimization engine is used to solve this model. The results verify the effectiveness of the model.
Federated Learning enables diverse devices to collaboratively train a shared model while keeping training data locally stored, avoiding the need for centralized cloud storage. Despite existing privacy measures, concerns arise from potential reverse engineering of gradients, even with added noise, revealing private data. To address this, recent research emphasizes using encrypted model parameters during training. This paper introduces a novel federated learning algorithm, leveraging coded local gradients without encryption, exchanging coded proxies for model parameters, and injecting surplus noise for enhanced privacy. Two algorithm variants are presented, showcasing convergence and learning rates adaptable to coding schemes and raw data characteristics. Two encryption-free implementations with fixed and random coding matrices are provided, demonstrating promising simulation results from both federated optimization and machine learning perspectives.
The creation of low-order dynamic models for complex industrial systems is complicated by disturbances and limited sensor accuracy. This work presents a system identification procedure that uses machine learning methods and process knowledge to robustly identify a low-order closed-loop model of a municipal solid waste (MSW) grate incineration plant. These types of plants are known for their strong disturbances coming from fuel composition fluctuations. Using Bayesian optimization, the algorithm ranks and selects inputs from the available sensor data and chooses the model structure. This results in accurate models with low complexity while avoiding overfitting. The method is applied and validated using data of an industrial MSW incineration plant. The obtained models give excellent predictions and confidence intervals for the steam capacity and intermediate quantities such as supply air flow and flue gas temperature. The identified continuous-time models are fully given, and their step-response dynamics are discussed. The models can be used to develop model-based unit control schemes for grate incineration plants. The presented method shows great potential for the identification of over-actuated systems or disturbed systems with many sensors.
Recent advances in NLP have significantly improved the performance of language models on a variety of tasks. While these advances are largely driven by the availability of large amounts of data and computational power, they also benefit from the development of better training methods and architectures. In this paper, we introduce CamemBERTa, a French DeBERTa model that builds upon the DeBERTaV3 architecture and training objective. We evaluate our model's performance on a variety of French downstream tasks and datasets, including question answering, part-of-speech tagging, dependency parsing, named entity recognition, and the FLUE benchmark, and compare against CamemBERT, the state-of-the-art monolingual model for French. Our results show that, given the same amount of training tokens, our model outperforms BERT-based models trained with MLM on most tasks. Furthermore, our new model reaches similar or superior performance on downstream tasks compared to CamemBERT, despite being trained on only 30% of its total number of input tokens. In addition to our experimental results, we also publicly release the weights and code implementation of CamemBERTa, making it the first publicly available DeBERTaV3 model outside of the original paper and the first openly available implementation of a DeBERTaV3 training objective. https://gitlab.inria.fr/almanach/CamemBERTa
Pre-trained language models have shown impressive performance on a variety of tasks and domains. Previous research on financial language models usually employs a generic training scheme to train standard model architectures, without completely leveraging the richness of the financial data. We propose a novel domain specific Financial LANGuage model (FLANG) which uses financial keywords and phrases for better masking, together with span boundary objective and in-filing objective. Additionally, the evaluation benchmarks in the field have been limited. To this end, we contribute the Financial Language Understanding Evaluation (FLUE), an open-source comprehensive suite of benchmarks for the financial domain. These include new benchmarks across 5 NLP tasks in financial domain as well as common benchmarks used in the previous research. Experiments on these benchmarks suggest that our model outperforms those in prior literature on a variety of NLP tasks. Our models, code and benchmark data are publicly available on Github and Huggingface.
In this era, the moment has arrived to move away from disease as the primary emphasis of medical treatment. Although impressive, the multiple techniques that have been developed to detect the diseases. In this time, there are some types of diseases COVID-19, normal flue, migraine, lung disease, heart disease, kidney disease, diabetics, stomach disease, gastric, bone disease, autism are the very common diseases. In this analysis, we analyze disease symptoms and have done disease predictions based on their symptoms. We studied a range of symptoms and took a survey from people in order to complete the task. Several classification algorithms have been employed to train the model. Furthermore, performance evaluation matrices are used to measure the model's performance. Finally, we discovered that the part classifier surpasses the others.
Several studies have reported the importance of optimally operating the absorption column in a post-combustion CO2 capture (PCC) plant. It has been demonstrated in our previous work how economic Model Predictive Control (EMPC) has a great potential to improve the operation of the PCC plant. However, the use of a general economic objective such as maximizing the absorption efficiency of the column can cause EMPC to drive the state of the system close to the constraints. This may often than not lead to solvent overcirculation and flooding which are undesirable. In this work, we present an EMPC with zone tracking algorithm as an effective means to address this problem. The proposed control algorithm incorporates a zone tracking objective and an economic objective to form a multi-objective optimal control problem. To ensure that the zone tracking objective is achieved in the presence of model uncertainties and time-varying flue gas flow rate, we propose a method to modify the original target zone with a control invariant set. The zone modification method combines both ellipsoidal control invariant set techniques and a back-off strategy. The use of ellipsoidal control invariant sets ensure that the method is applicable to large scale systems such as the absorption column. We present several simulation case studies that demonstrate the effectiveness and applicability of the proposed control algorithm to the absorption column in a post-combustion CO2 capture plant.
It is no doubt that the most important contributing cause of global efficiency of coal fired thermal systems is combustion efficiency. In this study, the relationship between the flame image obtained by a CCD camera and the excess air coefficient ({\lambda}) has been modelled. The model has been obtained with a three-stage approach: 1) Data collection and synchronization: Obtaining the flame images by means of a CCD camera mounted on a 10 cm diameter observation port, {\lambda} data has been coordinately measured and recorded by the flue gas analyzer. 2) Feature extraction: Gridding the flame image, it is divided into small pieces. The uniformity of each piece to the optimal flame image has been calculated by means of modelling with single and multivariable Gaussian, calculating of color probabilities and Gauss mixture approach. 3) Matching and testing: A multilayer artificial neural network (ANN) has been used for the matching of feature-{\lambda}.
Aiming at the problem that delay time is difficult to determine and prediction accuracy is low in building prediction model of SCR system, a dynamic modeling scheme based on a hybrid of multiple data-driven algorithms was proposed. First, processed abnormal values and normalized the data. To improve the relevance of the input data, used MIC to estimate delay time and reconstructed production data. Then used combined feature selection method to determine input variables. To further mine data information, VMD was used to decompose input time series. Finally, established NOx emission prediction model combining ELM and EC model. Experimental results based on actual historical operating data show that the MAPE of predicted results is 2.61%. Model sensitivity analysis shows that besides the amount of ammonia injection, the inlet oxygen concentration and the flue gas temperature have a significant impact on NOx emission, which should be considered in SCR process control and optimization.
In recent years, fossil-based fuels have been used to supply the energy needs of the world. Fossil-based fuels induce accumulation of the atmospheric CO2 which causes global warming. One of CO2 source is flue gas emission from the power plant. The microalgae have been considered excellent biological materials for reduction CO2 with ability to photosynthesis. In this study, air, 10% CO2, 15% CO2 and simulated flue gas (containing 15% CO2) feed were used to observe effect CO2 concentration and flue gas on cell growth and lipid content of Chlorella protothecoides. The highest dry cell weight (1,5 g/L) and lipid content (45%) values were obtained with 15% CO2 feed while the highest growth rate (1,10), biomass productivity (0,125 g/L/day), and lipid weight (0,63 g/g) were observed in 10% CO2 feed. Cultures fed with flue gas did not inhibited C. protothecoides growth and showed similar results with those fed with 15% CO2 gas in terms of growth rate, dry cell weight, biomass productivity and lipid content. These results showed that C. protothecoides has great potential for reducing CO2 emission from flue gas.
Inductive transfer learning has taken the entire NLP field by storm, with models such as BERT and BART setting new state of the art on countless NLU tasks. However, most of the available models and research have been conducted for English. In this work, we introduce BARThez, the first large-scale pretrained seq2seq model for French. Being based on BART, BARThez is particularly well-suited for generative tasks. We evaluate BARThez on five discriminative tasks from the FLUE benchmark and two generative tasks from a novel summarization dataset, OrangeSum, that we created for this research. We show BARThez to be very competitive with state-of-the-art BERT-based French language models such as CamemBERT and FlauBERT. We also continue the pretraining of a multilingual BART on BARThez' corpus, and show our resulting model, mBARThez, to significantly boost BARThez' generative performance. Code, data and models are publicly available.
Language models have become a key step to achieve state-of-the art results in many different Natural Language Processing (NLP) tasks. Leveraging the huge amount of unlabeled texts nowadays available, they provide an efficient way to pre-train continuous word representations that can be fine-tuned for a downstream task, along with their contextualization at the sentence level. This has been widely demonstrated for English using contextualized representations (Dai and Le, 2015; Peters et al., 2018; Howard and Ruder, 2018; Radford et al., 2018; Devlin et al., 2019; Yang et al., 2019b). In this paper, we introduce and share FlauBERT, a model learned on a very large and heterogeneous French corpus. Models of different sizes are trained using the new CNRS (French National Centre for Scientific Research) Jean Zay supercomputer. We apply our French language models to diverse NLP tasks (text classification, paraphrasing, natural language inference, parsing, word sense disambiguation) and show that most of the time they outperform other pre-training approaches. Different versions of FlauBERT as well as a unified evaluation protocol for the downstream tasks, called FLUE (French Language Understanding Evaluation), are shared to the research community for further reproducible experiments in French NLP.
Accurate prediction of mercury content emitted from fossil fueled power stations is of utmost important for environmental pollution assessment and hazard mitigation. In this paper, mercury content in the output gas of power stations boilers was predicted using adaptive neuro fuzzy inference system method integrated with particle swarm optimization. The input parameters of the model include coal characteristics and the operational parameters of the boilers. The dataset has been collected from a number of power plants and employed to educate and examine the proposed model. To evaluate the performance of the proposed ANFIS PSO model the statistical meter of MARE was implemented. Furthermore, relative errors between acquired data and predicted values presented, which confirm the accuracy of the model to deal nonlinearity and representing the dependency of flue gas mercury content into the specifications of coal and the boiler type.
In coal-fired power plants, it is critical to improve the operational efficiency of boilers for sustainability. In this work, we formulate real-time boiler control as an optimization problem that looks for the best distribution of temperature in different zones and oxygen content from the flue to improve the boiler's stability and energy efficiency. We employ an efficient algorithm by integrating appropriate machine learning and optimization techniques. We obtain a large dataset collected from a real boiler for more than two months from our industry partner, and conduct extensive experiments to demonstrate the effectiveness and efficiency of the proposed algorithm.