Temporal interpolation has the potential to be a powerful tool for video compression. Existing methods for frame interpolation do not discriminate between video textures and generally invoke a single general model capable of interpolating a wide range of video content. However, past work on video texture analysis and synthesis has shown that different textures exhibit vastly different motion characteristics and they can be divided into three classes (static, dynamic continuous and dynamic discrete). In this work, we study the impact of video textures on video frame interpolation, and propose a novel framework where, given an interpolation algorithm, separate models are trained on different textures. Our study shows that video texture has significant impact on the performance of frame interpolation models and it is beneficial to have separate models specifically adapted to these texture classes, instead of training a single model that tries to learn generic motion. Our results demonstrate that models fine-tuned using our framework achieve, on average, a 0.3dB gain in PSNR on the test set used.
Recently, flow-based methods have achieved promising success in video frame interpolation. However, electron microscopic (EM) images suffer from unstable image quality, low PSNR, and disorderly deformation. Existing flow-based interpolation methods cannot precisely compute optical flow for EM images since only predicting each position's unique offset. To overcome these problems, we propose a novel interpolation framework for EM images that progressively synthesizes interpolated features in a coarse-to-fine manner. First, we extract missing intermediate features by the proposed temporal spatial-adaptive (TSA) interpolation module. The TSA interpolation module aggregates temporal contexts and then adaptively samples the spatial-related features with the proposed residual spatial adaptive block. Second, we introduce a stacked deformable refinement block (SDRB) further enhance the reconstruction quality, which is aware of the matching positions and relevant features from input frames with the feedback mechanism. Experimental results demonstrate the superior performance of our approach compared to previous works, both quantitatively and qualitatively.
A majority of methods for video frame interpolation compute bidirectional optical flow between adjacent frames of a video, followed by a suitable warping algorithm to generate the output frames. However, approaches relying on optical flow often fail to model occlusions and complex non-linear motions directly from the video and introduce additional bottlenecks unsuitable for widespread deployment. We address these limitations with FLAVR, a flexible and efficient architecture that uses 3D space-time convolutions to enable end-to-end learning and inference for video frame interpolation. Our method efficiently learns to reason about non-linear motions, complex occlusions and temporal abstractions, resulting in improved performance on video interpolation, while requiring no additional inputs in the form of optical flow or depth maps. Due to its simplicity, FLAVR can deliver 3x faster inference speed compared to the current most accurate method on multi-frame interpolation without losing interpolation accuracy. In addition, we evaluate FLAVR on a wide range of challenging settings and consistently demonstrate superior qualitative and quantitative results compared with prior methods on various popular benchmarks including Vimeo-90K, UCF101, DAVIS, Adobe, and GoPro. Finally, we demonstrate that FLAVR for video frame interpolation can serve as a useful self-supervised pretext task for action recognition, optical flow estimation, and motion magnification.
Medical image slice interpolation is an active field of research. The methods for this task can be categorized into two broad groups: intensity-based and object-based interpolation methods. While intensity-based methods are generally easier to perform and less computationally expensive, object-based methods are capable of producing more accurate results and account for deformable changes in the objects within the slices. In this paper, performance of two well-known object-based interpolation methods is analyzed and compared. Here, a deformable registration-based method specifically designed for medical applications and a learning-based method, trained for video frame interpolation, are considered. While the deformable registration-based technique is capable of accurate modeling of the changes in the shapes of the objects within slices, the learning-based method is able to produce results with similar accuracy, but with a much sharper appearance in a fraction of the time. This is despite the fact that the learning-based approach is not trained on medical images and rather is trained using regular video footage. However, experiments show that the method is capable of accurate slice interpolation results.
We propose RIFE, a Real-time Intermediate Flow Estimation algorithm for Video Frame Interpolation (VFI). Many recent flow-based VFI methods first estimate the bi-directional optical flows, then scale and reverse them to approximate intermediate flows, leading to artifacts on motion boundaries and complex pipelines. RIFE uses a neural network named IFNet that can directly estimate the intermediate flows from coarse-to-fine with much better speed. We design a privileged distillation scheme for training IFNet, resulting in a large performance improvement. RIFE does not rely on pre-trained optical flow models and can support arbitrary-timestep frame interpolation with the temporal encoding input. Experiments demonstrate that RIFE achieves state-of-the-art performance on several public benchmarks. Compared with the popular SuperSlomo and DAIN methods, RIFE is 4--27 times faster and produces better results. The code is available at https://github.com/hzwer/arXiv2020-RIFE.
Video frame interpolation, the synthesis of novel views in time, is an increasingly popular research direction with many new papers further advancing the state of the art. But as each new method comes with a host of variables that affect the interpolation quality, it can be hard to tell what is actually important for this task. In this work, we show, somewhat surprisingly, that it is possible to achieve near state-of-the-art results with an older, simpler approach, namely adaptive separable convolutions, by a subtle set of low level improvements. In doing so, we propose a number of intuitive but effective techniques to improve the frame interpolation quality, which also have the potential to other related applications of adaptive convolutions such as burst image denoising, joint image filtering, or video prediction.
With the prosperity of digital video industry, video frame interpolation has arisen continuous attention in computer vision community and become a new upsurge in industry. Many learning-based methods have been proposed and achieved progressive results. Among them, a recent algorithm named quadratic video interpolation (QVI) achieves appealing performance. It exploits higher-order motion information (e.g. acceleration) and successfully models the estimation of interpolated flow. However, its produced intermediate frames still contain some unsatisfactory ghosting, artifacts and inaccurate motion, especially when large and complex motion occurs. In this work, we further improve the performance of QVI from three facets and propose an enhanced quadratic video interpolation (EQVI) model. In particular, we adopt a rectified quadratic flow prediction (RQFP) formulation with least squares method to estimate the motion more accurately. Complementary with image pixel-level blending, we introduce a residual contextual synthesis network (RCSN) to employ contextual information in high-dimensional feature space, which could help the model handle more complicated scenes and motion patterns. Moreover, to further boost the performance, we devise a novel multi-scale fusion network (MS-Fusion) which can be regarded as a learnable augmentation process. The proposed EQVI model won the first place in the AIM2020 Video Temporal Super-Resolution Challenge.
We propose Neural Crossbreed, a feed-forward neural network that can learn a semantic change of input images in a latent space to create the morphing effect. Because the network learns a semantic change, a sequence of meaningful intermediate images can be generated without requiring the user to specify explicit correspondences. In addition, the semantic change learning makes it possible to perform the morphing between the images that contain objects with significantly different poses or camera views. Furthermore, just as in conventional morphing techniques, our morphing network can handle shape and appearance transitions separately by disentangling the content and the style transfer for rich usability. We prepare a training dataset for morphing using a pre-trained BigGAN, which generates an intermediate image by interpolating two latent vectors at an intended morphing value. This is the first attempt to address image morphing using a pre-trained generative model in order to learn semantic transformation. The experiments show that Neural Crossbreed produces high quality morphed images, overcoming various limitations associated with conventional approaches. In addition, Neural Crossbreed can be further extended for diverse applications such as multi-image morphing, appearance transfer, and video frame interpolation.
Video frame interpolation aims at synthesizing intermediate frames from nearby source frames while maintaining spatial and temporal consistencies. The existing deep-learning-based video frame interpolation methods can be roughly divided into two categories: flow-based methods and kernel-based methods. The performance of flow-based methods is often jeopardized by the inaccuracy of flow map estimation due to oversimplified motion models, while that of kernel-based methods tends to be constrained by the rigidity of kernel shape. To address these performance-limiting issues, a novel mechanism named generalized deformable convolution is proposed, which can effectively learn motion information in a data-driven manner and freely select sampling points in space-time. We further develop a new video frame interpolation method based on this mechanism. Our extensive experiments demonstrate that the new method performs favorably against the state-of-the-art, especially when dealing with complex motions.
Video interpolation increases the temporal resolution of a video sequence by synthesizing intermediate frames between two consecutive frames. We propose a novel deep-learning-based video interpolation algorithm based on bilateral motion estimation. First, we develop the bilateral motion network with the bilateral cost volume to estimate bilateral motions accurately. Then, we approximate bi-directional motions to predict a different kind of bilateral motions. We then warp the two input frames using the estimated bilateral motions. Next, we develop the dynamic filter generation network to yield dynamic blending filters. Finally, we combine the warped frames using the dynamic blending filters to generate intermediate frames. Experimental results show that the proposed algorithm outperforms the state-of-the-art video interpolation algorithms on several benchmark datasets.
Generating non-existing frames from a consecutive video sequence has been an interesting and challenging problem in the video processing field. Typical kernel-based interpolation methods predict pixels with a single convolution process that convolves source frames with spatially adaptive local kernels, which circumvents the time-consuming, explicit motion estimation in the form of optical flow. However, when scene motion is larger than the pre-defined kernel size, these methods are prone to yield less plausible results. In addition, they cannot directly generate a frame at an arbitrary temporal position because the learned kernels are tied to the midpoint in time between the input frames. In this paper, we try to solve these problems and propose a novel non-flow kernel-based approach that we refer to as enhanced deformable separable convolution (EDSC) to estimate not only adaptive kernels, but also offsets, masks and biases to make the network obtain information from non-local neighborhood. During the learning process, different intermediate time step can be involved as a control variable by means of an extension of coord-conv trick, allowing the estimated components to vary with different input temporal information. This makes our method capable to produce multiple in-between frames. Furthermore, we investigate the relationships between our method and other typical kernel- and flow-based methods. Experimental results show that our method performs favorably against the state-of-the-art methods across a broad range of datasets. Code will be publicly available on URL: \url{https://github.com/Xianhang/EDSC-pytorch}.
Cardiac coronary angiography is a major technology to assist doctors during cardiac interventional surgeries. Under the exposure of X-ray radiation, doctors inject contrast agents through catheters to determine the position and status of coronary vessels in real time. To get a coronary angiography video with a high frame rate, the doctor needs to increase the exposure frequency and intensity of the X-ray. This will inevitably increase the X-ray harm to both patients and surgeons. In this work, we innovatively utilize a deep-learning based video interpolation algorithm to interpolate coronary angiography videos. Moreover, we establish a new coronary angiography image dataset ,which contains 95,039 triplets images to retrain the video interpolation network model. Using the retrained network we synthesize high frame rate coronary angiography video from the low frame rate coronary angiography video. The average peak signal to noise ratio(PSNR) of those synthesized video frames reaches 34dB. Extensive experiment results demonstrate the feasibility of using the video frame interpolation algorithm to synthesize continuous and clear high frame rate coronary angiography video. With the help of this technology, doctors can significantly reduce exposure frequency and intensity of the X-ray during coronary angiography.
Deep Neural Networks are increasingly used in video frame interpolation tasks such as frame rate changes as well as generating fake face videos. Our project aims to apply recent advances in Deep video interpolation to increase the temporal resolution of fluorescent microscopy time-lapse movies. To our knowledge, there is no previous work that uses Convolutional Neural Networks (CNN) to generate frames between two consecutive microscopy images. We propose a fully convolutional autoencoder network that takes as input two images and generates upto seven intermediate images. Our architecture has two encoders each with a skip connection to a single decoder. We evaluate the performance of several variants of our model that differ in network architecture and loss function. Our best model out-performs state of the art video frame interpolation algorithms. We also show qualitative and quantitative comparisons with state-of-the-art video frame interpolation algorithms. We believe deep video interpolation represents a new approach to improve the time-resolution of fluorescent microscopy.
This paper introduces GIMP-ML v1.1, a set of Python plugins for the widely popular GNU Image Manipulation Program (GIMP). It enables the use of recent advances in computer vision to the conventional image editing pipeline. Applications from deep learning such as monocular depth estimation, semantic segmentation, mask generative adversarial networks, image super-resolution, de-noising, de-hazing, matting, enlightening and coloring have been incorporated with GIMP through Python-based plugins. Additionally, operations on images such as k-means based color clustering have also been added. GIMP-ML relies on standard Python packages such as numpy, pytorch, open-cv, scipy. Apart from these, several image manipulation techniques using these plugins have been compiled and demonstrated in the YouTube channel (https://youtube.com/user/kritiksoman) with the objective of demonstrating the use-cases for machine learning based image modification. In addition, GIMP-ML also aims to bring the benefits of using deep learning networks used for computer vision tasks to routine image processing workflows. The code and installation procedure for configuring these plugins is available at https://github.com/kritiksoman/GIMP-ML.
Video frame interpolation achieves temporal super-resolution by generating smooth transitions between frames. Although great success has been achieved by deep neural networks, the synthesized images stills suffer from poor visual appearance and unsatisfactory artifacts. In this paper, we propose a novel network structure that leverages residue refinement and adaptive weight to synthesize in-between frames. The residue refinement technique is used for optical flow and image generation for higher accuracy and better visual appearance, while the adaptive weight map combines the forward and backward warped frames to reduce the artifacts. Moreover, all sub-modules in our method are implemented by U-Net with less depths, so the efficiency is guaranteed. Experiments on public datasets demonstrate the effectiveness and superiority of our method over the state-of-the-art approaches.
Video frame interpolation is a challenging problem because there are different scenarios for each video depending on the variety of foreground and background motion, frame rate, and occlusion. It is therefore difficult for a single network with fixed parameters to generalize across different videos. Ideally, one could have a different network for each scenario, but this is computationally infeasible for practical applications. In this work, we propose to adapt the model to each video by making use of additional information that is readily available at test time and yet has not been exploited in previous works. We first show the benefits of `test-time adaptation' through simple fine-tuning of a network, then we greatly improve its efficiency by incorporating meta-learning. We obtain significant performance gains with only a single gradient update without any additional parameters. Finally, we show that our meta-learning framework can be easily employed to any video frame interpolation network and can consistently improve its performance on multiple benchmark datasets.
Differentiable image sampling in the form of backward warping has seen broad adoption in tasks like depth estimation and optical flow prediction. In contrast, how to perform forward warping has seen less attention, partly due to additional challenges such as resolving the conflict of mapping multiple pixels to the same target location in a differentiable way. We propose softmax splatting to address this paradigm shift and show its effectiveness on the application of frame interpolation. Specifically, given two input frames, we forward-warp the frames and their feature pyramid representations based on an optical flow estimate using softmax splatting. In doing so, the softmax splatting seamlessly handles cases where multiple source pixels map to the same target location. We then use a synthesis network to predict the interpolation result from the warped representations. Our softmax splatting allows us to not only interpolate frames at an arbitrary time but also to fine tune the feature pyramid and the optical flow. We show that our synthesis approach, empowered by softmax splatting, achieves new state-of-the-art results for video frame interpolation.
Existing works reduce motion blur and up-convert frame rate through two separate ways, including frame deblurring and frame interpolation. However, few studies have approached the joint video enhancement problem, namely synthesizing high-frame-rate clear results from low-frame-rate blurry inputs. In this paper, we propose a blurry video frame interpolation method to reduce motion blur and up-convert frame rate simultaneously. Specifically, we develop a pyramid module to cyclically synthesize clear intermediate frames. The pyramid module features adjustable spatial receptive field and temporal scope, thus contributing to controllable computational complexity and restoration ability. Besides, we propose an inter-pyramid recurrent module to connect sequential models to exploit the temporal relationship. The pyramid module integrates a recurrent module, thus can iteratively synthesize temporally smooth results without significantly increasing the model size. Extensive experimental results demonstrate that our method performs favorably against state-of-the-art methods.
Slow motion videos are becoming increasingly popular, but capturing high-resolution videos at extremely high frame rates requires professional high-speed cameras. To mitigate this problem, current techniques increase the frame rate of standard videos through frame interpolation by assuming linear object motion which is not valid in challenging cases. In this paper, we address this problem using two video streams as input; an auxiliary video with high frame rate and low spatial resolution, providing temporal information, in addition to the standard main video with low frame rate and high spatial resolution. We propose a two-stage deep learning system consisting of alignment and appearance estimation that reconstructs high resolution slow motion video from the hybrid video input. For alignment, we propose to compute flows between the missing frame and two existing frames of the main video by utilizing the content of the auxiliary video frames. For appearance estimation, we propose to combine the warped and auxiliary frames using a context and occlusion aware network. We train our model on synthetically generated hybrid videos and show high-quality results on a variety of test scenes. To demonstrate practicality, we show the performance of our system on two real dual camera setups with small baseline.
In this paper, we explore the space-time video super-resolution task, which aims to generate a high-resolution (HR) slow-motion video from a low frame rate (LFR), low-resolution (LR) video. A simple solution is to split it into two sub-tasks: video frame interpolation (VFI) and video super-resolution (VSR). However, temporal interpolation and spatial super-resolution are intra-related in this task. Two-stage methods cannot fully take advantage of the natural property. In addition, state-of-the-art VFI or VSR networks require a large frame-synthesis or reconstruction module for predicting high-quality video frames, which makes the two-stage methods have large model sizes and thus be time-consuming. To overcome the problems, we propose a one-stage space-time video super-resolution framework, which directly synthesizes an HR slow-motion video from an LFR, LR video. Rather than synthesizing missing LR video frames as VFI networks do, we firstly temporally interpolate LR frame features in missing LR video frames capturing local temporal contexts by the proposed feature temporal interpolation network. Then, we propose a deformable ConvLSTM to align and aggregate temporal information simultaneously for better leveraging global temporal contexts. Finally, a deep reconstruction network is adopted to predict HR slow-motion video frames. Extensive experiments on benchmark datasets demonstrate that the proposed method not only achieves better quantitative and qualitative performance but also is more than three times faster than recent two-stage state-of-the-art methods, e.g., DAIN+EDVR and DAIN+RBPN.