Designers of millimeter wave (mmWave) cellular systems need to evaluate line-of-sight (LOS) maps to provide good service to users in urban scenarios. In this letter, we derive estimators to obtain LOS maps in scenarios with potential blocking elements. Applying previous stochastic geometry results, we formulate the optimal Bayesian estimator of the LOS map using a limited number of actual measurements at different locations. The computational cost of the optimal estimator is derived and is proven to be exponential in the number of available data points. An approximation is discussed, which brings the computational complexity from exponential to quasi-linear and allows the implementation of a practical estimator. Finally, we compare numerically the optimal estimator and the approximation with other estimators from the literature and also with an original heuristic estimator with good performance and low computational cost. For the comparison, both synthetic layouts and a real layout of Chicago have been used.
The extension of elastic optical networks (EON) to multi-band transmission (MB-EON) shows promise in enhancing spectral efficiency, throughput, and long-term cost-effectiveness for telecom operators. However, designing MB-EON networks introduces complex challenges, notably the optimization of physical parameters like optical power and quality of transmission (QoT). Frequency-dependent characteristics of fiber, such as loss, dispersion, and nonlinear effects, alongside inter-channel stimulated Raman scattering, pose significant hurdles when extending beyond the L+C (LC) band to a continuous spectrum over 100 nm. In this study, we propose a span-by-span methodology for optimal power allocation, introducing two hyper-accelerated power optimization (HPO) strategies: flat launch power (FLP) and flat received power (FRP). These approaches significantly expedite network power optimization while preserving the stability of running services. Our comparative analysis of FLP and FRP models reveals that while FRP has a minimal effect on capacity (increasing less than 10 Tbps for an L+C+S (LCS) system over 100 km), it improves flatness and GSNR/OSNR metrics in the S-band by approximately 2/0 dB and 2.5/6 dB, respectively. A network-wide analysis across various topologies shows that the FRP technique enhances minimum GSNR, contributing to a throughput increase of 12% to 75%, depending on network scale, at a 1% bandwidth blocking rate. Lastly, our application of HPO in MB-EON for both local and global power optimization demonstrates that while both approaches offer comparable performance, global optimization is simpler and more cost-effective for large-scale networks.
Large Language Models (LLMs) represent a revolutionary advancement in the contemporary landscape of artificial general intelligence (AGI). As exemplified by ChatGPT, LLM-based applications necessitate minimal response latency and maximal throughput for inference serving. However, due to the unpredictability of LLM execution, the first-come-first-serve (FCFS) scheduling policy employed by current LLM serving systems suffers from head-of-line (HoL) blocking issues and long job response times. In this paper, we propose a new efficient LLM inference serving framework, named ALISE. The key design paradigm of ALISE is to leverage a novel speculative scheduler by estimating the execution time for each job and exploiting such prior knowledge to assign appropriate job priority orders, thus minimizing potential queuing delays for heterogeneous workloads. Furthermore, to mitigate the memory overhead of the intermediate key-value (KV) cache, we employ a priority-based adaptive memory management protocol and quantization-based compression techniques. Evaluations demonstrate that in comparison to the state-of-the-art solution vLLM, ALISE improves the throughput of inference serving by up to 1.8x and 2.1x under the same latency constraint on the Alpaca and ShareGPT datasets, respectively.
This paper considers the problem of annotating datapoints using an expert with only a few annotation rounds in a label-scarce setting. We propose soliciting reliable feedback on difficulty in annotating a datapoint from the expert in addition to ground truth label. Existing literature in active learning or coreset selection turns out to be less relevant to our setting since they presume the existence of a reliable trained model, which is absent in the label-scarce regime. However, the literature on coreset selection emphasizes the presence of difficult data points in the training set to perform supervised learning in downstream tasks (Mindermann et al., 2022). Therefore, for a given fixed annotation budget of $\mathsf{T}$ rounds, we model the sequential decision-making problem of which (difficult) datapoints to choose for annotation in a sparse linear bandits framework with the constraint that no arm can be pulled more than once (blocking constraint). With mild assumptions on the datapoints, our (computationally efficient) Explore-Then-Commit algorithm BSLB achieves a regret guarantee of $\widetilde{\mathsf{O}}(k^{\frac{1}{3}} \mathsf{T}^{\frac{2}{3}} +k^{-\frac{1}{2}} \beta_k + k^{-\frac{1}{12}} \beta_k^{\frac{1}{2}}\mathsf{T}^{\frac{5}{6}})$ where the unknown parameter vector has tail magnitude $\beta_k$ at sparsity level $k$. To this end, we show offline statistical guarantees of Lasso estimator with mild Restricted Eigenvalue (RE) condition that is also robust to sparsity. Finally, we propose a meta-algorithm C-BSLB that does not need knowledge of the optimal sparsity parameters at a no-regret cost. We demonstrate the efficacy of our BSLB algorithm for annotation in the label-scarce setting for an image classification task on the PASCAL-VOC dataset, where we use real-world annotation difficulty scores.
A challenging problem in decentralized optimization is to develop algorithms with fast convergence on random and time varying topologies under unreliable and bandwidth-constrained communication network. This paper studies a stochastic approximation approach with a Fully Stochastic Primal Dual Algorithm (FSPDA) framework. Our framework relies on a novel observation that randomness in time varying topology can be incorporated in a stochastic augmented Lagrangian formulation, whose expected value admits saddle points that coincide with stationary solutions of the decentralized optimization problem. With the FSPDA framework, we develop two new algorithms supporting efficient sparsified communication on random time varying topologies -- FSPDA-SA allows agents to execute multiple local gradient steps depending on the time varying topology to accelerate convergence, and FSPDA-STORM further incorporates a variance reduction step to improve sample complexity. For problems with smooth (possibly non-convex) objective function, within $T$ iterations, we show that FSPDA-SA (resp. FSPDA-STORM) finds an $\mathcal{O}( 1/\sqrt{T} )$-stationary (resp. $\mathcal{O}( 1/T^{2/3} )$) solution. Numerical experiments show the benefits of the FSPDA algorithms.
The proliferation of fake news in the digital age has raised critical concerns, particularly regarding its impact on societal trust and democratic processes. Diverging from conventional agent-based simulation approaches, this work introduces an innovative approach by employing a large language model (LLM)-driven multi-agent simulation to replicate complex interactions within information ecosystems. We investigate key factors that facilitate news propagation, such as agent personalities and network structures, while also evaluating strategies to combat misinformation. Through simulations across varying network structures, we demonstrate the potential of LLM-based agents in modeling the dynamics of misinformation spread, validating the influence of agent traits on the diffusion process. Our findings emphasize the advantages of LLM-based simulations over traditional techniques, as they uncover underlying causes of information spread -- such as agents promoting discussions -- beyond the predefined rules typically employed in existing agent-based models. Additionally, we evaluate three countermeasure strategies, discovering that brute-force blocking influential agents in the network or announcing news accuracy can effectively mitigate misinformation. However, their effectiveness is influenced by the network structure, highlighting the importance of considering network structure in the development of future misinformation countermeasures.
Existing preference alignment is a one-size-fits-all alignment mechanism, where the part of the large language model (LLM) parametric knowledge with non-preferred features is uniformly blocked to all the users. However, this part of knowledge can be useful to advanced users whose expertise qualifies them to handle these information. The one-size-fits-all alignment mechanism undermines LLM's utility for these qualified users. To address this problem, we propose SudoLM, a framework that lets LLMs learn access control over specific parametric knowledge for users with different credentials via authorization alignment. SudoLM allows authorized users to unlock their access to all the parametric knowledge with an assigned SUDO key while blocking access to non-qualified users. Experiments on two application scenarios demonstrate that SudoLM effectively controls the user's access to the parametric knowledge and maintains its general utility.
In this study, we investigate the under-explored intervention planning aimed at disseminating accurate information within dynamic opinion networks by leveraging learning strategies. Intervention planning involves identifying key nodes (search) and exerting control (e.g., disseminating accurate or official information through the nodes) to mitigate the influence of misinformation. However, as the network size increases, the problem becomes computationally intractable. To address this, we first introduce a ranking algorithm to identify key nodes for disseminating accurate information, which facilitates the training of neural network classifiers that provide generalized solutions for the search and planning problems. Second, we mitigate the complexity of label generation, which becomes challenging as the network grows, by developing a reinforcement learning-based centralized dynamic planning framework. We analyze these NN-based planners for opinion networks governed by two dynamic propagation models. Each model incorporates both binary and continuous opinion and trust representations. Our experimental results demonstrate that the ranking algorithm-based classifiers provide plans that enhance infection rate control, especially with increased action budgets for small networks. Further, we observe that the reward strategies focusing on key metrics, such as the number of susceptible nodes and infection rates, outperform those prioritizing faster blocking strategies. Additionally, our findings reveal that graph convolutional network-based planners facilitate scalable centralized plans that achieve lower infection rates (higher control) across various network configurations, including Watts-Strogatz topology, varying action budgets, varying initial infected nodes, and varying degrees of infected nodes.
Large language models (LLMs) pose significant risks due to the potential for generating harmful content or users attempting to evade guardrails. Existing studies have developed LLM-based guard models designed to moderate the input and output of threat LLMs, ensuring adherence to safety policies by blocking content that violates these protocols upon deployment. However, limited attention has been given to the reliability and calibration of such guard models. In this work, we empirically conduct comprehensive investigations of confidence calibration for 9 existing LLM-based guard models on 12 benchmarks in both user input and model output classification. Our findings reveal that current LLM-based guard models tend to 1) produce overconfident predictions, 2) exhibit significant miscalibration when subjected to jailbreak attacks, and 3) demonstrate limited robustness to the outputs generated by different types of response models. Additionally, we assess the effectiveness of post-hoc calibration methods to mitigate miscalibration. We demonstrate the efficacy of temperature scaling and, for the first time, highlight the benefits of contextual calibration for confidence calibration of guard models, particularly in the absence of validation sets. Our analysis and experiments underscore the limitations of current LLM-based guard models and provide valuable insights for the future development of well-calibrated guard models toward more reliable content moderation. We also advocate for incorporating reliability evaluation of confidence calibration when releasing future LLM-based guard models.
Long-term Video Question Answering (VideoQA) is a challenging vision-and-language bridging task focusing on semantic understanding of untrimmed long-term videos and diverse free-form questions, simultaneously emphasizing comprehensive cross-modal reasoning to yield precise answers. The canonical approaches often rely on off-the-shelf feature extractors to detour the expensive computation overhead, but often result in domain-independent modality-unrelated representations. Furthermore, the inherent gradient blocking between unimodal comprehension and cross-modal interaction hinders reliable answer generation. In contrast, recent emerging successful video-language pre-training models enable cost-effective end-to-end modeling but fall short in domain-specific ratiocination and exhibit disparities in task formulation. Toward this end, we present an entirely end-to-end solution for long-term VideoQA: Multi-granularity Contrastive cross-modal collaborative Generation (MCG) model. To derive discriminative representations possessing high visual concepts, we introduce Joint Unimodal Modeling (JUM) on a clip-bone architecture and leverage Multi-granularity Contrastive Learning (MCL) to harness the intrinsically or explicitly exhibited semantic correspondences. To alleviate the task formulation discrepancy problem, we propose a Cross-modal Collaborative Generation (CCG) module to reformulate VideoQA as a generative task instead of the conventional classification scheme, empowering the model with the capability for cross-modal high-semantic fusion and generation so as to rationalize and answer. Extensive experiments conducted on six publicly available VideoQA datasets underscore the superiority of our proposed method.
Holographic multiple-input multiple-output (HMIMO) is an emerging technology for 6G communications, in which numerous antenna units are integrated in a limited space. As the HMIMO array aperture expands, the near-field region of the array is dramatically enlarged, resulting in more users being located in the near-field region. This creates new opportunities for wireless communications. In this context, the evaluation of the spatial degrees of freedom (DoF) of HMIMO multi-user systems in near-field channels is an open problem, as the analytical methods utilized for evaluating the DoF in far-field channels cannot be directly applied. In this paper, we propose a novel method to calculate the DoF of HMIMO in multi-user near-field channels. We first derive the DoF for a single user in the near field, and then extend the analysis to multi-user scenarios. In this latter scenario, we focus on the impact of spatial blocking between HMIMO users. The derived analytical framework reveals that the DoF of HMIMO in multi-user near-field channels is not in general given by the sum of the DoF of the HMIMO single-user setting because of spatial blocking. Simulation results demonstrate the effectiveness of the proposed method. In the considered case study, the number of DoF reduces by $21.2\%$ on average due to spatial blocking.
Efficient scheduling is crucial for interactive Large Language Model (LLM) applications, where low request completion time directly impacts user engagement. Size-based scheduling algorithms like Shortest Remaining Process Time (SRPT) aim to reduce average request completion time by leveraging known or estimated request sizes and allowing preemption by incoming jobs with shorter service times. However, two main challenges arise when applying size-based scheduling to LLM systems. First, accurately predicting output lengths from prompts is challenging and often resource-intensive, making it impractical for many systems. As a result, the state-of-the-art LLM systems default to first-come, first-served scheduling, which can lead to head-of-line blocking and reduced system efficiency. Second, preemption introduces extra memory overhead to LLM systems as they must maintain intermediate states for unfinished (preempted) requests. In this paper, we propose TRAIL, a method to obtain output predictions from the target LLM itself. After generating each output token, we recycle the embedding of its internal structure as input for a lightweight classifier that predicts the remaining length for each running request. Using these predictions, we propose a prediction-based SRPT variant with limited preemption designed to account for memory overhead in LLM systems. This variant allows preemption early in request execution when memory consumption is low but restricts preemption as requests approach completion to optimize resource utilization. On the theoretical side, we derive a closed-form formula for this SRPT variant in an M/G/1 queue model, which demonstrates its potential value. In our system, we implement this preemption policy alongside our embedding-based prediction method.
As large language models (LLMs) handle increasingly longer contexts, serving long inference requests of millions of tokens presents unique challenges. We show that existing work for long context inference is largely based on techniques from long context training, and does not handle the high variability in input lengths during inference. This leads to inefficient resource utilization, server fragmentation, and head-of-line (HOL) blocking. We present Medha, an end-to-end system for efficient long-context LLM inference that addresses these challenges through fine-grained time sharing. Medha introduces three key innovations: (1) the mechanism of adaptive prefill chunking to help mitigate HOL blocking with preemption; (2) two new parallelism strategies: Sequence Pipeline Parallelism (SPP) to reduce time-to-first-token by pipelining prefill chunks, and KV-Cache Parallelism (KVP) to lower time-peroutput-token by distributing decoding across servers; and (3) a novel input-length aware least remaining slack scheduling to meet Service Level Objectives (SLOs). Medha enables exact inference scaling beyond 10 million tokens, maintaining high throughput and low latency across mixed-length workloads. Compared to state-of-the-art systems, Medha reduces server fragmentation, cuts median latency by up to 30x, and improves throughput by over 5x, delivering production-scale long-context inference without compromising performance on shorter requests.
Entity Matching (EM) is crucial for identifying equivalent data entities across different sources, a task that becomes increasingly challenging with the growth and heterogeneity of data. Blocking techniques, which reduce the computational complexity of EM, play a vital role in making this process scalable. Despite advancements in blocking methods, the issue of fairness; where blocking may inadvertently favor certain demographic groups; has been largely overlooked. This study extends traditional blocking metrics to incorporate fairness, providing a framework for assessing bias in blocking techniques. Through experimental analysis, we evaluate the effectiveness and fairness of various blocking methods, offering insights into their potential biases. Our findings highlight the importance of considering fairness in EM, particularly in the blocking phase, to ensure equitable outcomes in data integration tasks.
The scaling of transformer-based Large Language Models (LLMs) has significantly expanded their context lengths, enabling applications where inputs exceed 100K tokens. Our analysis of a recent Azure LLM inference trace reveals a highly skewed long-tail distribution of input lengths, with approximately 80% of inputs shorter than 2K tokens. Long inputs constitute only a small fraction. Existing cluster-level LLM scheduling strategies, including First-In-First-Out (FIFO), reservation-based, and priority-based approaches, primarily target short-input requests with lengths below 2K and fail to address this heterogeneity, leading to inefficiencies such as head-of-line blocking, resource underutilization, and starvation of long-input requests. We propose PecSched, a Preemptive and Efficient Cluster SCHEDuling system for LLM inference. PecSched introduces the following key techniques: 1) preemptive scheduling that prioritizes short-input requests for their performance; 2) coordinated prefill-decode colocation and disaggregation, which reduces both the duration and frequency of preemptions; 3) fast Sequence Parallelism (SP) that minimizes the prefill time of long-input requests to further reduce the likelihood and frequency of preemptions. Evaluations based on Azure LLM inference trace show that, compared to state-of-the-art cluster-level LLM inference schedulers, PecSched reduces the 99th percentile queueing delay of short-input requests by up to 92% and improves their throughput by up to 595%, without significantly affecting the Job Completion Time (JCT) of long-input requests. We open-sourced our code.
The key manifestation of coronary artery disease (CAD) is development of fibroatheromatous plaque, the cap of which may rupture and subsequently lead to coronary artery blocking and heart attack. As such, quantitative analysis of coronary plaque, its plaque cap, and consequently the cap's likelihood to rupture are of critical importance when assessing a risk of cardiovascular events. This paper reports a new deep learning based approach, called FiAt-Net, for detecting angular extent of fibroatheroma (FA) and segmenting its cap in 3D intravascular optical coherence tomography (IVOCT) images. IVOCT 2D image frames are first associated with distinct clusters and data from each cluster are used for model training. As plaque is typically focal and thus unevenly distributed, a binary partitioning method is employed to identify FA plaque areas to focus on to mitigate the data imbalance issue. Additional image representations (called auxiliary images) are generated to capture IVOCT intensity changes to help distinguish FA and non-FA areas on the coronary wall. Information in varying scales is derived from the original IVOCT and auxiliary images, and a multi-head self-attention mechanism is employed to fuse such information. Our FiAt-Net achieved high performance on a 3D IVOCT coronary image dataset, demonstrating its effectiveness in accurately detecting FA cap in IVOCT images.
Precise, consistent, and reliable positioning is crucial for a multitude of uses. In order to achieve high precision global positioning services, multi-sensor fusion techniques, such as the Global Navigation Satellite System (GNSS)/Inertial Navigation System (INS)/Vision integration system, combine the strengths of various sensors. This technique is essential for localization in complex environments and has been widely used in the mass market. However, frequent signal deterioration and blocking in urban environments exacerbates the degradation of GNSS positioning and negatively impacts the performance of the multi-sensor integration system. For GNSS pseudorange and carrier phase observation data in the urban environment, we offer an innovation-based cycle slip/multipath estimation, detection, and mitigation (I-EDM) method to reduce the influence of multipath effects and cycle slips on location induced by obstruction in urban settings. The method obtains the innovations of GNSS observations with the cluster analysis method. Then the innovations are used to detect the cycle slips and multipath. Compared with the residual-based method, the innovation-based method avoids the residual overfitting caused by the least square method, resulting in better detection of outliers within the GNSS observations. The vehicle tests carried out in urban settings verify the proposed approach. Experimental results indicate that the accuracy of 0.23m, 0.11m, and 0.31m in the east, north and up components can be achieved by the GNSS/INS/Vision tightly coupled system with the I-EDM method, which has a maximum of 21.6% improvement when compared with the residual-based EDM (R-EDM) method.
Short-video recommender systems often exhibit a biased preference to recently released videos. However, not all videos become outdated; certain classic videos can still attract user's attention. Such bias along temporal dimension can be further aggravated by the matching model between users and videos, because the model learns from preexisting interactions. From real data, we observe that different videos have varying sensitivities to recency in attracting users' attention. Our analysis, based on a causal graph modeling short-video recommendation, suggests that the release interval serves as a confounder, establishing a backdoor path between users and videos. To address this confounding effect, we propose a model-agnostic causal architecture called Learning to Deconfound the Release Interval Bias (LDRI). LDRI enables jointly learning of the matching model and the video recency sensitivity perceptron. In the inference stage, we apply a backdoor adjustment, effectively blocking the backdoor path by intervening on each video. Extensive experiments on two benchmarks demonstrate that LDRI consistently outperforms backbone models and exhibits superior performance against state-of-the-art models. Additional comprehensive analyses confirm the deconfounding capability of LDRI.
In Large Language Model (LLM) inference, the output length of an LLM request is typically regarded as not known a priori. Consequently, most LLM serving systems employ a simple First-come-first-serve (FCFS) scheduling strategy, leading to Head-Of-Line (HOL) blocking and reduced throughput and service quality. In this paper, we reexamine this assumption -- we show that, although predicting the exact generation length of each request is infeasible, it is possible to predict the relative ranks of output lengths in a batch of requests, using learning to rank. The ranking information offers valuable guidance for scheduling requests. Building on this insight, we develop a novel scheduler for LLM inference and serving that can approximate the shortest-job-first (SJF) schedule better than existing approaches. We integrate this scheduler with the state-of-the-art LLM serving system and show significant performance improvement in several important applications: 2.8x lower latency in chatbot serving and 6.5x higher throughput in synthetic data generation. Our code is available at https://github.com/hao-ai-lab/vllm-ltr.git
This paper proposes a method for estimating and detecting optical signals in practical photon-counting receivers. There are two important aspects of non-perfect photon-counting receivers, namely, (i) dead time which results in blocking loss, and (ii) non-photon-number-resolving, which leads to counting loss during the gate-ON interval. These factors introduce nonlinear distortion to the detected photon counts. The detected photon counts depend not only on the optical intensity but also on the signal waveform, and obey a Poisson binomial process. Using the discrete Fourier transform characteristic function (DFT-CF) method, we derive the probability mass function (PMF) of the detected photon counts. Furthermore, unlike conventional methods that assume an ideal rectangle wave, we propose a novel signal estimation and decision method applicable to arbitrary waveform. We demonstrate that the proposed method achieves superior error performance compared to conventional methods. The proposed algorithm has the potential to become an essential signal processing tool for photon-counting receivers.