The state-of-the-art in discriminative unsupervised surface anomaly detection relies on external datasets for synthesizing anomaly-augmented training images. Such approaches are prone to failure on near-in-distribution anomalies since these are difficult to be synthesized realistically due to their similarity to anomaly-free regions. We propose an architecture based on quantized feature space representation with dual decoders, DSR, that avoids the image-level anomaly synthesis requirement. Without making any assumptions about the visual properties of anomalies, DSR generates the anomalies at the feature level by sampling the learned quantized feature space, which allows a controlled generation of near-in-distribution anomalies. DSR achieves state-of-the-art results on the KSDD2 and MVTec anomaly detection datasets. The experiments on the challenging real-world KSDD2 dataset show that DSR significantly outperforms other unsupervised surface anomaly detection methods, improving the previous top-performing methods by 10% AP in anomaly detection and 35% AP in anomaly localization.
Image-based machine learning models can be used to make the sorting and grading of agricultural products more efficient. In many regions, implementing such systems can be difficult due to the lack of centralization and automation of postharvest supply chains. Stakeholders are often too small to specialize in machine learning, and large training data sets are unavailable. We propose a machine learning procedure for images based on pre-trained Vision Transformers. It is easier to implement than the current standard approach of training Convolutional Neural Networks (CNNs) as we do not (re-)train deep neural networks. We evaluate our approach based on two data sets for apple defect detection and banana ripeness estimation. Our model achieves a competitive classification accuracy equal to or less than one percent below the best-performing CNN. At the same time, it requires three times fewer training samples to achieve a 90% accuracy.
This paper introduces DGNet, a novel deep framework that exploits object gradient supervision for camouflaged object detection (COD). It decouples the task into two connected branches, i.e., a context and a texture encoder. The essential connection is the gradient-induced transition, representing a soft grouping between context and texture features. Benefiting from the simple but efficient framework, DGNet outperforms existing state-of-the-art COD models by a large margin. Notably, our efficient version, DGNet-S, runs in real-time (80 fps) and achieves comparable results to the cutting-edge model JCSOD-CVPR$_{21}$ with only 6.82% parameters. Application results also show that the proposed DGNet performs well in polyp segmentation, defect detection, and transparent object segmentation tasks. Codes will be made available at https://github.com/GewelsJI/DGNet.
The vast majority of text transformation techniques in NLP are inherently limited in their ability to expand input space coverage due to an implicit constraint to preserve the original class label. In this work, we propose the notion of sibylvariance (SIB) to describe the broader set of transforms that relax the label-preserving constraint, knowably vary the expected class, and lead to significantly more diverse input distributions. We offer a unified framework to organize all data transformations, including two types of SIB: (1) Transmutations convert one discrete kind into another, (2) Mixture Mutations blend two or more classes together. To explore the role of sibylvariance within NLP, we implemented 41 text transformations, including several novel techniques like Concept2Sentence and SentMix. Sibylvariance also enables a unique form of adaptive training that generates new input mixtures for the most confused class pairs, challenging the learner to differentiate with greater nuance. Our experiments on six benchmark datasets strongly support the efficacy of sibylvariance for generalization performance, defect detection, and adversarial robustness.
An automated and accurate fabric defect inspection system is in high demand as a replacement for slow, inconsistent, error-prone, and expensive human operators in the textile industry. Previous efforts focused on certain types of fabrics or defects, which is not an ideal solution. In this paper, we propose a novel one-class model that is capable of detecting various defects on different fabric types. Our model takes advantage of a well-designed Gabor filter bank to analyze fabric texture. We then leverage an advanced deep learning algorithm, autoencoder, to learn general feature representations from the outputs of the Gabor filter bank. Lastly, we develop a nearest neighbor density estimator to locate potential defects and draw them on the fabric images. We demonstrate the effectiveness and robustness of the proposed model by testing it on various types of fabrics such as plain, patterned, and rotated fabrics. Our model also achieves a true positive rate (a.k.a recall) value of 0.895 with no false alarms on our dataset based upon the Standard Fabric Defect Glossary.
X-ray image plays an important role in manufacturing industry for quality assurance, because it can reflect the internal condition of weld region. However, the shape and scale of different defect types vary greatly, which makes it challenging for model to detect weld defects. In this paper, we propose a weld defect detection method based on convolution neural network, namely Lighter and Faster YOLO (LF-YOLO). In particularly, a reinforced multiscale feature (RMF) module is designed to implement both parameter-based and parameter-free multi-scale information extracting operation. RMF enables the extracted feature map capable to represent more plentiful information, which is achieved by superior hierarchical fusion structure. To improve the performance of detection network, we propose an efficient feature extraction (EFE) module. EFE processes input data with extremely low consumption, and improves the practicability of whole network in actual industry. Experimental results show that our weld defect detection network achieves satisfactory balance between performance and consumption, and reaches 92.9 mean average precision mAP50 with 61.5 frames per second (FPS). To further prove the ability of our method, we test it on public dataset MS COCO, and the results show that our LF-YOLO has a outstanding versatility detection performance. The code is available at https://github.com/lmomoy/LF-YOLO.
In industrial manufacturing processes, errors frequently occur at unpredictable times and in unknown manifestations. We tackle the problem of automatic defect detection without requiring any image samples of defective parts. Recent works model the distribution of defect-free image data, using either strong statistical priors or overly simplified data representations. In contrast, our approach handles fine-grained representations incorporating the global and local image context while flexibly estimating the density. To this end, we propose a novel fully convolutional cross-scale normalizing flow (CS-Flow) that jointly processes multiple feature maps of different scales. Using normalizing flows to assign meaningful likelihoods to input samples allows for efficient defect detection on image-level. Moreover, due to the preserved spatial arrangement the latent space of the normalizing flow is interpretable which enables to localize defective regions in the image. Our work sets a new state-of-the-art in image-level defect detection on the benchmark datasets Magnetic Tile Defects and MVTec AD showing a 100% AUROC on 4 out of 15 classes.
The usage of electronic devices increases, and becomes predominant in most aspects of life. Surface Mount Technology (SMT) is the most common industrial method for manufacturing electric devices in which electrical components are mounted directly onto the surface of a Printed Circuit Board (PCB). Although the expansion of electronic devices affects our lives in a productive way, failures or defects in the manufacturing procedure of those devices might also be counterproductive and even harmful in some cases. It is therefore desired and sometimes crucial to ensure zero-defect quality in electronic devices and their production. While traditional Image Processing (IP) techniques are not sufficient to produce a complete solution, other promising methods like Deep Learning (DL) might also be challenging for PCB inspection, mainly because such methods require big adequate datasets which are missing, not available or not updated in the rapidly growing field of PCBs. Thus, PCB inspection is conventionally performed manually by human experts. Unsupervised Learning (UL) methods may potentially be suitable for PCB inspection, having learning capabilities on the one hand, while not relying on large datasets on the other. In this paper, we introduce ChangeChip, an automated and integrated change detection system for defect detection in PCBs, from soldering defects to missing or misaligned electronic elements, based on Computer Vision (CV) and UL. We achieve good quality defect detection by applying an unsupervised change detection between images of a golden PCB (reference) and the inspected PCB under various setting. In this work, we also present CD-PCB, a synthesized labeled dataset of 20 pairs of PCB images for evaluation of defect detection algorithms.
Pre-trained models for Natural Languages (NL) like BERT and GPT have been recently shown to transfer well to Programming Languages (PL) and largely benefit a broad set of code-related tasks. Despite their success, most current methods either rely on an encoder-only (or decoder-only) pre-training that is suboptimal for generation (resp. understanding) tasks or process the code snippet in the same way as NL, neglecting the special characteristics of PL such as token types. We present CodeT5, a unified pre-trained encoder-decoder Transformer model that better leverages the code semantics conveyed from the developer-assigned identifiers. Our model employs a unified framework to seamlessly support both code understanding and generation tasks and allows for multi-task learning. Besides, we propose a novel identifier-aware pre-training task that enables the model to distinguish which code tokens are identifiers and to recover them when they are masked. Furthermore, we propose to exploit the user-written code comments with a bimodal dual generation task for better NL-PL alignment. Comprehensive experiments show that CodeT5 significantly outperforms prior methods on understanding tasks such as code defect detection and clone detection, and generation tasks across various directions including PL-NL, NL-PL, and PL-PL. Further analysis reveals that our model can better capture semantic information from code. Our code and pre-trained models are released at https: //github.com/salesforce/CodeT5 .
In this paper, we propose an efficient approach for industrial defect detection that is modeled based on anomaly detection using point pattern data. Most recent works use \textit{global features} for feature extraction to summarize image content. However, global features are not robust against lighting and viewpoint changes and do not describe the image's geometrical information to be fully utilized in the manufacturing industry. To the best of our knowledge, we are the first to propose using transfer learning of local/point pattern features to overcome these limitations and capture geometrical information of the image regions. We model these local/point pattern features as a random finite set (RFS). In addition we propose RFS energy, in contrast to RFS likelihood as anomaly score. The similarity distribution of point pattern features of the normal sample has been modeled as a multivariate Gaussian. Parameters learning of the proposed RFS energy does not require any heavy computation. We evaluate the proposed approach on the MVTec AD dataset, a multi-object defect detection dataset. Experimental results show the outstanding performance of our proposed approach compared to the state-of-the-art methods, and the proposed RFS energy outperforms the state-of-the-art in the few shot learning settings.
Videos captured using Transmission Electron Microscopy (TEM) can encode details regarding the morphological and temporal evolution of a material by taking snapshots of the microstructure sequentially. However, manual analysis of such video is tedious, error-prone, unreliable, and prohibitively time-consuming if one wishes to analyze a significant fraction of frames for even videos of modest length. In this work, we developed an automated TEM video analysis system for microstructural features based on the advanced object detection model called YOLO and tested the system on an in-situ ion irradiation TEM video of dislocation loops formed in a FeCrAl alloy. The system provides analysis of features observed in TEM including both static and dynamic properties using the YOLO-based defect detection module coupled to a geometry analysis module and a dynamic tracking module. Results show that the system can achieve human comparable performance with an F1 score of 0.89 for fast, consistent, and scalable frame-level defect analysis. This result is obtained on a real but exceptionally clean and stable data set and more challenging data sets may not achieve this performance. The dynamic tracking also enabled evaluation of individual defect evolution like per defect growth rate at a fidelity never before achieved using common human analysis methods. Our work shows that automatically detecting and tracking interesting microstructures and properties contained in TEM videos is viable and opens new doors for evaluating materials dynamics.
Visual surface anomaly detection aims to detect local image regions that significantly deviate from normal appearance. Recent surface anomaly detection methods rely on generative models to accurately reconstruct the normal areas and to fail on anomalies. These methods are trained only on anomaly-free images, and often require hand-crafted post-processing steps to localize the anomalies, which prohibits optimizing the feature extraction for maximal detection capability. In addition to reconstructive approach, we cast surface anomaly detection primarily as a discriminative problem and propose a discriminatively trained reconstruction anomaly embedding model (DRAEM). The proposed method learns a joint representation of an anomalous image and its anomaly-free reconstruction, while simultaneously learning a decision boundary between normal and anomalous examples. The method enables direct anomaly localization without the need for additional complicated post-processing of the network output and can be trained using simple and general anomaly simulations. On the challenging MVTec anomaly detection dataset, DRAEM outperforms the current state-of-the-art unsupervised methods by a large margin and even delivers detection performance close to the fully-supervised methods on the widely used DAGM surface-defect detection dataset, while substantially outperforming them in localization accuracy.
We present CoTexT, a pre-trained, transformer-based encoder-decoder model that learns the representative context between natural language (NL) and programming language (PL). Using self-supervision, CoTexT is pre-trained on large programming language corpora to learn a general understanding of language and code. CoTexT supports downstream NL-PL tasks such as code summarizing/documentation, code generation, defect detection, and code debugging. We train CoTexT on different combinations of available PL corpus including both "bimodal" and "unimodal" data. Here, bimodal data is the combination of text and corresponding code snippets, whereas unimodal data is merely code snippets. We first evaluate CoTexT with multi-task learning: we perform Code Summarization on 6 different programming languages and Code Refinement on both small and medium size featured in the CodeXGLUE dataset. We further conduct extensive experiments to investigate CoTexT on other tasks within the CodeXGlue dataset, including Code Generation and Defect Detection. We consistently achieve SOTA results in these tasks, demonstrating the versatility of our models.
Steel pipes are widely used in high-risk and high-pressure scenarios such as oil, chemical, natural gas, shale gas, etc. If there is some defect in steel pipes, it will lead to serious adverse consequences. Applying object detection in the field of deep learning to pipe weld defect detection and identification can effectively improve inspection efficiency and promote the development of industrial automation. Most predecessors used traditional computer vision methods applied to detect defects of steel pipe weld seams. However, traditional computer vision methods rely on prior knowledge and can only detect defects with a single feature, so it is difficult to complete the task of multi-defect classification, while deep learning is end-to-end. In this paper, the state-of-the-art single-stage object detection algorithm YOLOv5 is proposed to be applied to the field of steel pipe weld defect detection, and compared with the two-stage representative object detection algorithm Faster R-CNN. The experimental results show that applying YOLOv5 to steel pipe weld defect detection can greatly improve the accuracy, complete the multi-classification task, and meet the criteria of real-time detection.
Deep-learning methods have recently started being employed for addressing surface-defect detection problems in industrial quality control. However, with a large amount of data needed for learning, often requiring high-precision labels, many industrial problems cannot be easily solved, or the cost of the solutions would significantly increase due to the annotation requirements. In this work, we relax heavy requirements of fully supervised learning methods and reduce the need for highly detailed annotations. By proposing a deep-learning architecture, we explore the use of annotations of different details ranging from weak (image-level) labels through mixed supervision to full (pixel-level) annotations on the task of surface-defect detection. The proposed end-to-end architecture is composed of two sub-networks yielding defect segmentation and classification results. The proposed method is evaluated on several datasets for industrial quality inspection: KolektorSDD, DAGM and Severstal Steel Defect. We also present a new dataset termed KolektorSDD2 with over 3000 images containing several types of defects, obtained while addressing a real-world industrial problem. We demonstrate state-of-the-art results on all four datasets. The proposed method outperforms all related approaches in fully supervised settings and also outperforms weakly-supervised methods when only image-level labels are available. We also show that mixed supervision with only a handful of fully annotated samples added to weakly labelled training images can result in performance comparable to the fully supervised model's performance but at a significantly lower annotation cost.
Benchmark datasets have a significant impact on accelerating research in programming language tasks. In this paper, we introduce CodeXGLUE, a benchmark dataset to foster machine learning research for program understanding and generation. CodeXGLUE includes a collection of 10 tasks across 14 datasets and a platform for model evaluation and comparison. CodeXGLUE also features three baseline systems, including the BERT-style, GPT-style, and Encoder-Decoder models, to make it easy for researchers to use the platform. The availability of such data and baselines can help the development and validation of new methods that can be applied to various program understanding and generation problems.
The multi-scale defect detection for photovoltaic (PV) cell electroluminescence (EL) images is a challenging task, due to the feature vanishing as network deepens. To address this problem, an attention-based top-down and bottom-up architecture is developed to accomplish multi-scale feature fusion. This architecture, called Bidirectional Attention Feature Pyramid Network (BAFPN), can make all layers of the pyramid share similar semantic features. In BAFPN, cosine similarity is employed to measure the importance of each pixel in the fused features. Furthermore, a novel object detector is proposed, called BAF-Detector, which embeds BAFPN into Region Proposal Network (RPN) in Faster RCNN+FPN. BAFPN improves the robustness of the network to scales, thus the proposed detector achieves a good performance in multi-scale defects detection task. Finally, the experimental results on a large-scale EL dataset including 3629 images, 2129 of which are defective, show that the proposed method achieves 98.70% (F-measure), 88.07% (mAP), and 73.29% (IoU) in terms of multi-scale defects classification and detection results in raw PV cell EL images.
Visual defect detection is critical to ensure the quality of most products. However, the majority of small and medium-sized manufacturing enterprises still rely on tedious and error-prone human manual inspection. The main reasons include: 1) the existing automated visual defect detection systems require altering production assembly lines, which is time consuming and expensive 2) the existing systems require manually collecting defective samples and labeling them for a comparison-based algorithm or training a machine learning model. This introduces a heavy burden for small and medium-sized manufacturing enterprises as defects do not happen often and are difficult and time-consuming to collect. Furthermore, we cannot exhaustively collect or define all defect types as any new deviation from acceptable products are defects. In this paper, we overcome these challenges and design a three-stage plug-and-play fully automated unsupervised 360-degree defect detection system. In our system, products are freely placed on an unaltered assembly line and receive 360 degree visual inspection with multiple cameras from different angles. As such, the images collected from real-world product assembly lines contain lots of background noise. The products face different angles. The product sizes vary due to the distance to cameras. All these make defect detection much more difficult. Our system use object detection, background subtraction and unsupervised normalizing flow-based defect detection techniques to tackle these difficulties. Experiments show our system can achieve 0.90 AUROC in a real-world non-altered drinkware production assembly line.
The dominant approach for surface defect detection is the use of hand-crafted feature-based methods. However, this falls short when conditions vary that affect extracted images. So, in this paper, we sought to determine how well several state-of-the-art Convolutional Neural Networks perform in the task of surface defect detection. Moreover, we propose two methods: CNN-Fusion, that fuses the prediction of all the networks into a final one, and Auto-Classifier, which is a novel proposal that improves a Convolutional Neural Network by modifying its classification component using AutoML. We carried out experiments to evaluate the proposed methods in the task of surface defect detection using different datasets from DAGM2007. We show that the use of Convolutional Neural Networks achieves better results than traditional methods, and also, that Auto-Classifier out-performs all other methods, by achieving 100% accuracy and 100% AUC results throughout all the datasets.
The detection of manufacturing errors is crucial in fabrication processes to ensure product quality and safety standards. Since many defects occur very rarely and their characteristics are mostly unknown a priori, their detection is still an open research question. To this end, we propose DifferNet: It leverages the descriptiveness of features extracted by convolutional neural networks to estimate their density using normalizing flows. Normalizing flows are well-suited to deal with low dimensional data distributions. However, they struggle with the high dimensionality of images. Therefore, we employ a multi-scale feature extractor which enables the normalizing flow to assign meaningful likelihoods to the images. Based on these likelihoods we develop a scoring function that indicates defects. Moreover, propagating the score back to the image enables pixel-wise localization. To achieve a high robustness and performance we exploit multiple transformations in training and evaluation. In contrast to most other methods, ours does not require a large number of training samples and performs well with as low as 16 images. We demonstrate the superior performance over existing approaches on the challenging and newly proposed MVTec AD and Magnetic Tile Defects datasets.