arXiv:2611.23788v2 physics.med-ph

두부 콘빔 CT에서 블라인드 강체 움직임 보정을 위한 기하 브리지 플로 매칭

Geometry-bridge flow matching for blind rigid-motion correction in head cone-beam CT

Sungho Yun, Seungryong Cho

제출 2026-11-19

한국어 초록

두부 콘빔 CT(CBCT) 촬영 중 환자 머리의 강체 움직임은 영상 품질을 저하시키고 측정된 투영 데이터로부터 정확한 해부학적 구조를 복원하는 것을 어렵게 만들 수 있다. 본 연구에서는 움직임으로 인한 영상 변화를 학습하는 3D 플로 매칭 사전 분포 접근법을 제시한다. 이 방법의 기하 브리지는 동일한 원본 볼륨에 대해 움직임으로 훼손된 Feldkamp-Davis-Kress(FDK) 복원 영상과 움직임이 없는 FDK 복원 영상을, 모의 움직임을 점진적으로 줄여 가며 연결한다. 순방향 투영기의 기하 도함수는 이 경로를 따라 해석적 속도 목표를 제공한다. 플러그 앤 플레이 루프는 학습된 영상 갱신, 스플라인 기반 자세 추정, 켤레 기울기법 데이터 일관성, 영상 총변동 정규화를 함께 포함한다. 정제된 영상 볼륨과 추정된 자세에서 얻은 FDK 복원 영상 볼륨을 모두 평가한다. 성분별 공칭 움직임 진폭이 10 mm/10도 이내인 CQ500의 보류된 환자 30명에 대한 모의 360뷰 스캔에서, 제안한 프레임워크는 학습형 오토포커스 및 확산 기반 결합 복원 등 다른 방법과 비교하여 최고 수준의 영상 복원 품질과 움직임 정확도를 달성하였다. 평균 최대 신호 대 잡음비(PSNR)는 37.1 dB에 도달하였고 평균 검출기 평면 재투영 오차(RPE)는 0.27 mm였다. 추론 설정에서 종단점을 일치시켰을 때, 기하 브리지는 영상 선형 학습에 비해 PSNR을 1.6 dB 향상시키고 RPE를 33% 감소시켰다. 사전 분포 갱신 50회와 coarse-to-fine 움직임 추정을 적용했을 때, RTX A6000에서 환자당 평균 총 처리 시간은 9.1분이었다.

원문 초록

Rigid motion of a patient head during head cone-beam CT (CBCT) scan can degrade image quality and complicate recovery of accurate anatomical structures from the measured projections. We present a 3D flow-matching prior approach that learns the image changes induced by motion. Its geometry-bridge connects motion-corrupted and motion-free Feldkamp-Davis-Kress (FDK) reconstructed images of the same source volume through progressively reduced simulated motion. The forward projector's geometry derivative supplies analytic velocity targets along this path. A plug-and-play loop encompasses the learned image updates together with spline-based pose estimation, conjugate-gradient data consistency, and image total-variation regularization. Both the refined image volume and the FDK reconstructed image volume at the estimated poses are evaluated. On simulated 360-view scans from 30 held-out CQ500 patients with nominal per-component motion amplitudes within 10 mm / 10 degrees, the framework achieved state-of-the-art image reconstruction quality and motion accuracy in comparison with other methos such as learned autofocus and diffusion-based joint reconstruction. Mean peak signal-to-noise ratio (PSNR) reached 37.1 dB and mean detector-plane reprojection error (RPE) was 0.27 mm. With matched endpoints at the inference settings, the geometry bridge improved PSNR by 1.6 dB and reduced RPE by 33% relative to image-linear training. With 50 prior updates and coarse-to-fine motion estimation, total processing time averaged 9.1 minutes per patient on an RTX A6000.

제출 이력

확인된 버전만 표시합니다. 전체 제출 이력은 arXiv 원문에서 확인하세요.

  1. arXiv:2611.23788v2제출 시각 미확인
  2. arXiv:2611.23788v1제출 시각 미확인

함께 살펴볼 논문

공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.

공통 태그로 연결된 공개 논문이 아직 없습니다.

토론

이 논문과 연결된 포럼 글이 아직 없습니다.