arXiv:2611.16701v1 cs.CV

Sprint3D: 파이프라인 최적화를 통한 종단 간 3D 에셋 생성 가속

Sprint3D: Accelerating End-to-End 3D Asset Generation through Pipeline Optimization

Sho Kuno, Ruihan Yu, Yonghao Yu, Guixu Lin, Lian Fu, Muyao Niu, Yu-Ju Tsai, Zheng-Hui Huang, Yi-Chuan Huang, Siqi Yang, Fengbo Lan, Erwin Wu, Kaipeng Zhang, Zhixiang Wang

제출 2026-11-12

저자 비고

arXiv Comments

Project page: https://alaya-lab.github.io/sprint3d/ Code: https://github.com/AlayaLab/sprint3d

한국어 초록

이미지-3D 생성 모델은 이제 에셋 품질의 텍스처 메시를 생성하지만, 에셋당 수 분이 걸려 반복 작업이 느리고 배포 비용이 크다. 기존 연구는 주로 네트워크의 샘플링을 가속해 왔으며, 메시 처리까지 최적화하는 경우에도 자체 생성기를 학습시킨다. 반면 본 연구는 공개된 파이프라인에서 출발하여 종단 간 시간을 얼마나 절약할 수 있는지를 묻는다. 공개된 Pixal3D 파이프라인을 프로파일링한 결과, 지연 시간은 네트워크 이후의 과정이 지배하는 것으로 나타났다. 네 개의 rectified flow가 전체 실제 경과 시간의 14%를 차지하고 메시 후처리가 85%를 차지하며, 그 대부분은 CPU 기반 UV 언래핑에서 발생한다. 따라서 먼저 메시 후처리를 GPU에서 다시 구축하고 임계 경로에서 제거한 뒤, flow의 평가당 오버헤드를 줄이고 네트워크 평가 횟수를 76회에서 8회로 증류한다. 그 결과인 Sprint3D 파이프라인은 동일한 내보내기 설정에서 H200 GPU 한 대 기준 에셋당 중앙값 시간을 133초에서 4.05초로 줄인다(33$\times$). 동시에 보류된 Toys4K 객체 2,653개에서 Pixal3D 프로토콜의 모든 입력 뷰 법선 지표를 개선하며, 평균 실루엣 IoU는 약간 낮고 포인트 클라우드 정렬 점수는 낮으며 미세한 텍스처 디테일은 적다. 다시 구축한 후처리만으로도 동일한 내보내기 코드를 사용하는 TRELLIS.2를 6.7$\times$ 가속하며, 평가한 지표에서 검출 가능한 변화는 없다.

원문 초록

Image-to-3D generative models now produce asset-quality textured meshes, but at minutes per asset they remain slow to iterate with and costly to deploy. Prior work has mostly accelerated the sampling of the networks, and where it also optimizes the mesh processing, it trains its own generators. We instead start from a publicly released pipeline and ask how much of its end-to-end time can be saved. Profiling the public Pixal3D pipeline shows that its latency is dominated by what happens after the networks: the four rectified flows take 14% of the wall-clock time and mesh post-processing takes 85%, most of it in CPU-based UV unwrapping. We therefore first rebuild the mesh post-processing on the GPU and take it off the critical path, then cut the per-evaluation overhead of the flows and distill them from 76 to 8 network evaluations. The resulting pipeline, Sprint3D, reduces the median time per asset from 133 s to 4.05 s on one H200 GPU at the same export settings (33$\times$). At the same time, on 2,653 held-out Toys4K objects it improves every input-view normal metric of the Pixal3D protocol, with a slightly lower mean silhouette IoU, lower point-cloud alignment scores and less fine texture detail. The rebuilt post-processing alone also speeds up TRELLIS.2, which uses the same export code, by 6.7$\times$ without a detectable change in the evaluated metrics.

제출 이력

확인된 버전만 표시합니다. 전체 제출 이력은 arXiv 원문에서 확인하세요.

  1. arXiv:2611.16701v1

함께 살펴볼 논문

공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.

공통 태그로 연결된 공개 논문이 아직 없습니다.

토론

이 논문과 연결된 포럼 글이 아직 없습니다.