arXiv:2610.00237v1 cs.CE

컴포넌트화된 항공우주 시스템에서 물리장 예측을 위한 조합적 임베딩 아키텍처

Compositional Embedding Architecture for Physical Field Prediction in Componentized Aerospace Systems

Qineng Wang, Xinrui Zhou, Shuwen Yue, Kangli Bao, Hairun Xie, Yonghe Zhang

제출 2026-09-23

저자 비고

arXiv Comments

32 pages, 13 figures

한국어 초록

우주선 열 설계(spacecraft thermal design)는 발열 구성요소의 개수와 공간적 배치, 그리고 열 경계조건의 변화가 온도장(temperature field)에 미치는 영향을 반복적으로 평가해야 한다. 고정밀 수치 시뮬레이션(high-fidelity numerical simulation)은 계산 비용이 커서 대규모 설계 스크리닝에 활용하기 어렵다. 대체 모델(surrogate model)을 사용하면 온도장 예측을 가속화할 수 있지만, 기존 접근법들은 일반적으로 전체 구성(configuration)을 하나로 인코딩할 뿐 구성 간에 재사용 가능한 국부적 물리적 구성요소(local physical constituent)를 명시적으로 활용하지 않으며, 이로 인해 학습 과정에서 다루지 않은 구성요소 개수 및 조합에 대한 정확도가 제한된다. 이 문제를 해결하기 위해, 우리는 복잡한 우주선 열 구성을 재사용 가능한 국부적 물리 인자(local physical factor)로 분해하고, 트리 구조의 조합 모듈(tree-structured composition module)을 사용하여 서로 다른 인자 조합에 대응하는 전역 온도장 응답을 학습하는 트리 구조 인자 조합 네트워크(Tree-Structured Factor Composition Network, TFCN)를 제안한다. TFCN은 지정 온도(prescribed-temperature) 및 복사 열유량(radiative-flux) 경계조건을 갖는 2차원 정상상태(steady-state) 우주선 열해석 사례에서 평가된다. 모델은 발열 구성요소 개수가 15개 이하인 구성에서만 학습되며, 16~25개의 구성요소를 포함하는 미학습(unseen) 구성에서 평가된다. 지정 온도 및 복사 열유량 사례에서 TFCN은 구성요소 개수 분포 외(out-of-distribution) RMSE 값으로 각각 4.21K와 18.62K를 달성하였으며, 이는 가장 강력한 기준선(baseline) 대비 각각 65.6%와 33.6%의 감소에 해당한다. 이러한 결과는 TFCN이 구성요소 개수 변화에 따른 온도장 예측의 신뢰성을 향상시키며, 신속한 우주선 열 설계 평가 및 대규모 구성 스크리닝을 위한 효율적인 대체 모델(surrogate)을 제공함을 보여준다.

원문 초록

Spacecraft thermal design requires repeated evaluation of how variations in the number and spatial arrangement of heat-generating components and in thermal boundary conditions affect the temperature field. High-fidelity numerical simulations are computationally expensive and therefore difficult to use for large-scale design screening. Although surrogate models can accelerate temperature-field prediction, existing approaches generally encode each complete configuration as a whole and do not explicitly exploit the reusability of local physical constituents across configurations, which limits their accuracy for component counts and combinations not covered during training. To address this issue, we propose the Tree-Structured Factor Composition Network (TFCN), which decomposes complex spacecraft thermal configurations into reusable local physical factors and employs a tree-structured composition module to learn the global temperature-field response associated with different factor combinations. TFCN is evaluated on two-dimensional steady-state spacecraft thermal-analysis cases with prescribed-temperature and radiative-flux boundary conditions. The model is trained exclusively on configurations containing no more than 15 heat-generating components and evaluated on unseen configurations containing 16-25 components. For the prescribed-temperature and radiative-flux cases, TFCN achieves component-count out-of-distribution RMSE values of 4.21 K and 18.62 K, respectively, representing reductions of 65.6% and 33.6% relative to the strongest baseline. These results demonstrate that TFCN improves the reliability of temperature-field prediction under variations in component count and provides an efficient surrogate for rapid spacecraft thermal-design evaluation and large-scale configuration screening.

제출 이력

확인된 버전만 표시합니다. 전체 제출 이력은 arXiv 원문에서 확인하세요.

  1. arXiv:2610.00237v1

함께 살펴볼 논문

공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.

공통 태그로 연결된 공개 논문이 아직 없습니다.

토론

이 논문과 연결된 포럼 글이 아직 없습니다.