arXiv:2609.22172v1 eess.SP

웨이블릿 및 STFT 특징을 활용한 e-트랜스액슬 품질 모니터링을 위한 단계별 이상치 탐지

Stagewise Anomaly Detection for E-Transaxle Quality Monitoring Using Wavelet and STFT Features

Mohammad N. Bisheh, Rajesh Gupta, Qian Wang, Mohammad Babakmehr, Colin Brady, Parinaz Farajiparvar, Saurabh Singh, Kamran Payanabar

제출 2026-09-22

한국어 초록

본 논문은 전기차의 e-트랜스액슬(e-transaxle) 조립품 품질 선별을 위한 두 가지 해석 가능한 머신러닝 프레임워크인 단계별 웨이블릿 고립 포레스트(SWIF, Stagewise Wavelet Isolation Forest) 프레임워크와 단시간 푸리에 변환(STFT) 기반 진단 프레임워크를 제시합니다. 전면 및 후면 가속도계에서 획득한 고차원 진동 신호는 여러 작동 단계에 걸쳐 분석되어 단계별 진동 특성을 포착합니다. SWIF 프레임워크에서는 신호가 5단계 도비시-4(Daubechies-4) 이산 웨이블릿 변환을 사용하여 분해되며, 선택된 웨이블릿 세부 수준에서 블록별 평균 제곱 계수를 추출하여 조밀한 다중 스케일 특징을 얻습니다. STFT 기반 프레임워크에서는 시간-주파수 표현에서 주요 주파수 추세를 추출하고 순간 모터 속도에 대한 회귀 계수를 통해 요약합니다. 이상치 탐지 모델은 승인된 조립품 중 극히 일부만이 잠재적 결함을 포함한다는 가정 하에 승인된 생산품을 사용하여 학습(training)되며, 품질 결과가 검증된 도로 주행 테스트 완료 장치를 사용하여 성능을 평가(evaluation)합니다. 생산 및 도로 주행 테스트를 거친 e-트랜스액슬 장치에 대한 실험 결과, 두 접근 방식 모두 해석 가능한 진단 정보를 제공하는 한편, SWIF가 결함 탐지와 오탐(false-positive) 제어 사이에서 가장 우수한 균형을 달성함을 보여줍니다. STFT 기반 방법 및 대안적 이상치 탐지기들과 비교할 때, 고립 포레스트(Isolation Forest)와 결합된 SWIF는 불합격(Reject) 모집단에서 고위험 장치를 식별하면서 합격(Accept) 모집단 내에서 더 낮은 이상치 비율을 산출합니다. 또한 단계별 구조는 이상 거동을 특정 작동 조건으로 국소화하여 근본 원인 분석과 목표 지향적 공정 개선을 지원합니다.

원문 초록

This paper presents two interpretable machine-learning frameworks for quality screening of e-transaxle assemblies in electric vehicles: a Stagewise Wavelet Isolation Forest (SWIF) framework and a short-time Fourier transform (STFT)-based diagnostic framework. High-dimensional vibration signals acquired from front and back accelerometers are analyzed across multiple operating stages to capture stage-dependent vibration behavior. In the SWIF framework, signals are decomposed using a five-level Daubechies-4 discrete wavelet transform, and blockwise mean-squared coefficients are extracted from the selected wavelet detail level to obtain compact multiscale features. In the STFT-based framework, dominant-frequency trends are extracted from time-frequency representations and summarized through regression coefficients with respect to instantaneous motor speed. Anomaly detection models are trained using accepted production units under the assumption that only a small fraction of accepted assemblies contain latent defects, and their performance is evaluated using road-tested units with validated quality outcomes. Experiments on production and road-tested e-transaxle units show that both approaches provide interpretable diagnostic information, while SWIF achieves the most favorable balance between defect detection and false-positive control. Compared with the STFT-based method and alternative anomaly detectors, SWIF combined with Isolation Forest yields lower anomaly rates within the Accept population while identifying high-risk units from the Reject population. The stagewise structure further localizes anomalous behavior to specific operating conditions, supporting root-cause analysis and targeted process improvement.

제출 이력

확인된 버전만 표시합니다. 전체 제출 이력은 arXiv 원문에서 확인하세요.

  1. arXiv:2609.22172v1제출 시각 미확인

함께 살펴볼 논문

공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.

공통 태그로 연결된 공개 논문이 아직 없습니다.

토론

이 논문과 연결된 포럼 글이 아직 없습니다.