arXiv:2609.02988v1 cs.LG

TCAD-in-the-Loop 설계 공간 탐색을 위한 메시 네이티브 물리 정보 기반 그래프 서로게이트

Mesh-Native Physics-Informed Graph Surrogates for TCAD-in-the-Loop Design Space Exploration

Leonid Popryho, Ayoub Sadeghi, Inna Partin-Vaisband

제출 2026-09-02

한국어 초록

드리프트-확산(drift-diffusion) 수송에 대한 고정밀 TCAD 시뮬레이션은 차세대 FinFET 소자 설계의 핵심 도구로 남아 있지만, 계산 비용이 크며 특히 3D 구조에서는 메시 복잡도에 따라 실행 시간이 급격히 증가합니다. 이로 인해 다목적 설계 공간 탐색이 크게 제한됩니다. 기존 머신러닝 서로게이트(surrogate)는 고정된 설계 파라미터 집합을 소수의 스칼라 소자 지표로 매핑하기 때문에 기저의 물리를 버리게 되고, 소자 기하 구조와 소자 계열 간의 전이 가능성도 잃게 됩니다. 이에 본 논문은 물리 정보 기반 그래프 어텐션 네트워크(GAT) 서로게이트를 제안합니다. 이 모델은 사면체 TCAD 메시 위에서 직접 동작하며, 모든 메시 노드에서 드리프트-확산 시스템의 기본 미지수인 정전 퍼텐셜과 전자 및 정공의 준-페르미 준위(quasi-Fermi level)를 함께 예측합니다. 학습은 데이터 손실과 유한 체적법(finite-volume) 전류 연속성 잔차를 결합하여, 캐리어 수송 물리를 목적 함수에 내재화합니다. 메시를 그래프로 다루기 때문에 서로게이트는 크기 일반화 능력을 갖습니다. 즉, 소수의 핀(fin)으로 이루어진 메시로 학습한 모델을 수정 없이 훨씬 큰 어레이에 적용할 수 있으며, 추론 시에는 GPU 메모리만이 한계가 됩니다. 딥 앙상블(deep ensemble)이 산출하는 노드별 불확실성은 능동 학습(active learning) 루프를 구동하여, 큰 후보 풀을 수 초 내에 선별하고 가장 정보량이 큰 설계만 전체 시뮬레이션으로 넘깁니다. 다중 핀 트라이게이트(tri-gate) FinFET에 대해 Sentaurus Device와 비교 평가한 결과, 이 서로게이트는 세 가지 드리프트-확산 필드를 필드별 RMSE 1V 미만 수준으로 재현하며, 설계당 처리량은 전체 시뮬레이터보다 수십~수백 배를 넘어 여러 자릿수(orders of magnitude) 높은 수준에 이릅니다. 이러한 이점은 소자 크기가 커질수록 더욱 커집니다. 직접 시뮬레이션하기에는 엄청나게 느린 대형 다중 핀 어레이에서도 추론은 소자당 1초 이내에 완료되며, 이는 직접적인 TCAD 스윕으로는 불가능한 소자 규모 전반에 걸친 파레토 프런트(Pareto-front) 탐색을 가능하게 합니다.

원문 초록

High-fidelity TCAD simulation of drift-diffusion transport remains the workhorse of emerging FinFET device design, but it is computationally expensive, especially for 3D structures where runtime escalates steeply with mesh complexity. This sharply limits multi-objective design space exploration. Existing machine-learning surrogates map a fixed set of design parameters to a few scalar device metrics, discarding the underlying physics and losing transferability across device geometries and families. A physics-informed graph attention network (GAT) surrogate is proposed. It operates directly on the tetrahedral TCAD mesh and predicts, at every mesh node, the electrostatic potential together with the electron and hole quasi-Fermi levels, the fundamental unknowns of the drift-diffusion system. Training combines a data loss with finite-volume current-continuity residuals, embedding carrier-transport physics into the objective. Operating on the mesh as a graph, the surrogate inherits size generalization: a model trained on few-fin meshes applies unchanged to substantially larger arrays, bounded at inference only by GPU memory. Per-node uncertainty from a deep ensemble drives an active-learning loop that screens large candidate pools in seconds and forwards only the most informative designs for full simulation. Benchmarked against Sentaurus Device on multi-fin tri-gate FinFETs, the surrogate reproduces the three drift-diffusion fields with sub-volt per-field RMSE and reaches a per-design throughput orders of magnitude higher than the full simulator. The advantage grows with device size: on large multi-fin arrays that are prohibitively slow to simulate directly, inference still completes in under a second per device, enabling Pareto-front exploration across device scales infeasible for direct TCAD sweeps.

제출 이력

확인된 버전만 표시합니다. 전체 제출 이력은 arXiv 원문에서 확인하세요.

  1. arXiv:2609.02988v1제출 시각 미확인

함께 살펴볼 논문

공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.

공통 태그로 연결된 공개 논문이 아직 없습니다.

토론

이 논문과 연결된 포럼 글이 아직 없습니다.