arXiv:2409.12345

Wing Optimisation for a tractor propeller driven Micro Aerial Vehicle

Arjun Sharma, Roddam Narasimha

제출 2024-09-18

원문 초록

This paper describes an investigation of the possible benefits from wing optimisation in improving the performance of Micro Air Vehicles (MAVs). As an example we study the Avion (3.64 kg mass, 1.60 m span), being designed at the CSIR National Aerospace Laboratories (NAL), Bengaluru. The optimisation is first carried out using the methodology described by Rakshith \emph{et al.} (using an in\textendash house software PROWING), developed for large transport aircraft, with certain modifications to adapt the code to the special features of the MAV. The chief among such features is the use of low Reynolds number aerofoils with significantly different aerodynamic characteristics on a small MAV. These characteristics are taken from test data when available, and/or estimated by the XFOIL code of Drela. A total of 8 optimisation cases are studied for the purpose, leading to 6 different options for new wing planforms (and associated twist distributions along the wing span) with an improved performance. It is found that the improvements in drag coefficient using the PROWING code are about 5%. However, by allowing the operating lift coefficient $C_L$ to float within a specified range, drag bucket characteristics of the Eppler E423 aerofoil used on Avion can be exploited to improve the endurance, which is a major performance parameter for Avion. Thus, compared to the control wing $W_0$ (with operating point at $C_L$ =0.7) used in the preliminary design, permitting a variation of $C_L$ over a range of $\pm$ 10% is shown to enhance the endurance of wing $W_4$ by 18.6%, and of wing $W_{6}$ with a permitted $C_L$ range of $\pm$ 50% by 39.2%. Apart from the philosophy of seeking optimal operating conditions for a given configuration, the advantages of optimising design parameters such as washout of a simple wing proposed in the preliminary design stage, is also demonstrated.

함께 살펴볼 논문

공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.

arXiv:2506.10630cs.LG공통 태그 Philosophy공식 코드 · Papers with Code

Time Series Forecasting as Reasoning: A Slow-Thinking Approach with Reinforced LLMs

시간 시계열 예측(Time Series Forecasting, TSF)을 발전시키기 위해, 예측 정확도를 향상시키기 위한 다양한 방법이 제안되었으며, 이는 통계 기법에서 데이터 기반의 심층 학습 아키텍처로 발전해왔습니다. 이러한 방법들이 효과적임에도 불구하고, 대부분의 기존 방법은 여전히 빠른 사고 패러다임에 의존하고 있으며, 이는 역사적 패턴을 추출하고 이를 미래 값에 매핑하는 것을 핵심 모델링 철학으로 삼고 있어 중간 시간 시계열 추론을 포함한 명시적인 사고 과정을 결여하고 있습니다. 한편, 새로운 느린 사고 대규모 언어 모델(LLM)들(예: OpenAI-o1)은 놀라운 다단계 추론 능력을 보여주며, 이러한 문제를 극복할 수 있는 대안을 제공합니다. 그러나 프롬프트 엔지니어링만으로는 높은 계산 비용, 개인 정보 위험, 그리고 심층 도메인 특화된 시간 시계열 추론에 대한 제한된 능력 등 여러 가지 한계가 존재합니다. 이러한 한계를 해결하기 위해, LLM이 느린 사고 능력을 개발하고 강력한 시간 시계열 추론 기술을 습득하도록 훈련하는 것이 더 유망한 접근 방식입니다. 이를 위해, 우리는 시간 시계열 예측을 위한 LLM의 다단계 추론 능력을 향상시키기 위해 설계된 두 단계 강화 파인튜닝 프레임워크인 Time-R1을 제안합니다. 구체적으로, 첫 번째 단계에서는 워밍업 적응을 위한 감독된 파인튜닝을 수행하고, 두 번째 단계에서는 모델의 일반화 능력을 향상시키기 위해 강화 학습을 적용합니다. 특히, 우리는 시간 시계열 예측을 위해 특별히 설계된 세분화된 다목적 보상을 설계하고, 비균일 샘플링을 활용하여 모델의 효과적인 추론 경로 탐색을 더욱 장려하고 최적화하는 GRIP(정책 최적화를 위한 그룹 기반 상대 중요도)를 도입합니다. 실험 결과, Time-R1은 다양한 데이터셋에서 예측 성능을 크게 향상시키는 것으로 나타났습니다.

토론

이 논문과 연결된 포럼 글이 아직 없습니다.