Electromechanical System Design for Self-Balancing Robot

원문 초록

Self-balancing robot is based on the principle of Inverted pendulum, which is a two-wheel vehicle balances itself up in the vertical position with reference to the ground. It consists of both hardware and software implementation. Mechanical model based on the state space design of the cart, pendulum system. To find its stable inverted position, we used a generic feedback controller (i.e., PID controller). According to the situation we have to control both angel of pendulum and position of cart. Mechanical design consists of two dc gear motor with encoder, one Arduino microcontroller, IMU (inertial mass unit) sensor and motor driver as a basic need. IMU sensor which consists of accelerometer and gyroscope gives the reference acceleration and angle with respect to ground (vertical), When encoder which is attached with the motor gives the speed of the motor. These parameters are taken as the system parameter and determine the external force needed to balance the robot up. It will be prevented from falling by giving acceleration to the wheels according to its inclination from the vertical. If the bot tilts by an angle, then in the frame of the wheels; the center of mass of the bot will experience a pseudo force which will apply a torque opposite to the direction of tilt. We used a HC05 Bluetooth module to control the robot via our smartphone.