arXiv:2305.02822

Enabling High-Precision 5G mmWave-Based Positioning for Autonomous Vehicles in Dense Urban Environments

Qamar Bader, Sharief Saleh, Mohamed Elhabiby, Aboelmagd Noureldin

제출 2023-05-04

원문 초록

5G-based mmWave wireless positioning has emerged as a promising solution for autonomous vehicle (AV) positioning in recent years. Previous studies have highlighted the benefits of fusing a line-of-sight (LoS) 5G positioning solution with an Inertial Navigation System (INS) for an improved positioning solution. However, the highly dynamic environment of urban areas, where AVs are expected to operate, poses a challenge, as non-line-of-sight (NLoS) communication can deteriorate the 5G mmWave positioning solution and lead to erroneous corrections to the INS. To address this challenge, we exploit 5G multipath and LoS signals to improve positioning performance in dense urban environments. In addition, we integrate the proposed 5G-based positioning with low-cost onboard motion sensors (OBMS). Moreover, the integration is realized using an unscented Kalman filter (UKF) as an alternative to the widely utilized EKF as a fusion engine to avoid ignoring the higher-order and non-linear terms of the dynamic system model. We also introduce techniques to evaluate the quality of each LoS and multipath measurement prior to incorporation into the filter's correction stage. To validate the proposed methodologies, we performed two test trajectories in the dense urban environment of downtown Toronto, Canada. For each trajectory, quasi-real 5G measurements were collected using a ray-tracing tool incorporating 3D map scans of real-world buildings, allowing for realistic multipath scenarios. For the same trajectories, real OBMS data were collected from two-different low-cost IMUs. Our integrated positioning solution was capable of maintaining a level of accuracy below 30 cm for approximately 97% of the time, which is superior to the accuracy level achieved when multipath signals are not considered, which is only around 91% of the time.

함께 살펴볼 논문

공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.

arXiv:2505.08854v2cs.CV공통 태그 Autonomous Vehicles공식 코드 · Papers with Code

자율주행을 위한 생성형 AI: 최전선과 기회

Generative AI for Autonomous Driving: Frontiers and Opportunities

생성형 인공지능(GenAI)은 콘텐츠 생성, 추론, 계획, 멀티모달 이해를 위한 비할 데 없는 역량을 통해 산업을 재편하는 변혁적인 기술 물결을 형성하고 있습니다. 이러한 혁신적인 힘은 공학 분야의 가장 큰 난제 중 하나인 신뢰할 수 있는 완전 자율주행의 달성, 특히 레벨 5 자율주행의 실현을 향한 가장 유망한 경로를 제공합니다. 본 서베이 논문은 자율주행 스택 전반에 걸친 생성형 AI의 부상하는 역할을 포괄적이고 비판적으로 종합하여 제시합니다. 먼저 VAE, GAN, 확산 모델(Diffusion Models), 대규모 언어 모델(LLM)을 아우르는 현대 생성 모델링의 원리와 트레이드오프를 정리합니다. 이어서 이미지, LiDAR, 궤적, 점유(occupancy), 비디오 생성뿐만 아니라 LLM 기반 추론 및 의사결정에서의 최전선 응용 사례를 조망합니다. 또한 합성 데이터 워크플로우, 엔드투엔드(end-to-end) 주행 전략, 고충실도 디지털 트윈 시스템, 지능형 교통 네트워크, 체화된 AI(embodied AI)로의 도메인 간 전이 등 실질적인 적용 분야를 분류합니다. 희귀 사례에 걸친 포괄적 일반화, 평가 및 안전성(safety) 검증, 예산 제약 기반 구현, 규제 준수, 윤리적 문제, 환경적 영향과 같은 주요 장애물과 가능성을 식별하는 동시에, 이론적 보증, 신뢰 메트릭, 교통 통합, 사회기술적 영향에 걸친 연구 계획을 제안합니다. 이러한 흐름을 통합함으로써, 본 서베이는 생성형 AI와 첨단 자율 이동성의 수렴을 탐색하는 연구자, 엔지니어, 정책 입안자들에게 미래지향적인 참고자료를 제공합니다. 인용된 연구들을 적극적으로 관리하는 저장소는 https://github.com/taco-group/GenAI4AD 에서 확인할 수 있습니다.

토론

이 논문과 연결된 포럼 글이 아직 없습니다.