arXiv:2112.12589

A deep reinforcement learning model for predictive maintenance planning of road assets: Integrating LCA and LCCA

Moein Latifi, Fateme Golivand Darvishvand, Omid Khandel, Mobin Latifi Nowsoud

제출 2021-12-20

원문 초록

Road maintenance planning is an integral part of road asset management. One of the main challenges in Maintenance and Rehabilitation (M&R) practices is to determine maintenance type and timing. This research proposes a framework using Reinforcement Learning (RL) based on the Long Term Pavement Performance (LTPP) database to determine the type and timing of M&R practices. A predictive DNN model is first developed in the proposed algorithm, which serves as the Environment for the RL algorithm. For the Policy estimation of the RL model, both DQN and PPO models are developed. However, PPO has been selected in the end due to better convergence and higher sample efficiency. Indicators used in this study are International Roughness Index (IRI) and Rutting Depth (RD). Initially, we considered Cracking Metric (CM) as the third indicator, but it was then excluded due to the much fewer data compared to other indicators, which resulted in lower accuracy of the results. Furthermore, in cost-effectiveness calculation (reward), we considered both the economic and environmental impacts of M&R treatments. Costs and environmental impacts have been evaluated with paLATE 2.0 software. Our method is tested on a hypothetical case study of a six-lane highway with 23 kilometers length located in Texas, which has a warm and wet climate. The results propose a 20-year M&R plan in which road condition remains in an excellent condition range. Because the early state of the road is at a good level of service, there is no need for heavy maintenance practices in the first years. Later, after heavy M&R actions, there are several 1-2 years of no need for treatments. All of these show that the proposed plan has a logical result. Decision-makers and transportation agencies can use this scheme to conduct better maintenance practices that can prevent budget waste and, at the same time, minimize the environmental impacts.

함께 살펴볼 논문

공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.

arXiv:2610.13354v1cs.AI공통 태그 Reinforcement Learning (RL), Deep Reinforcement Learning

AlphaNIST: 이진 작업 보상으로부터 발현되는 조립 기술

AlphaNIST: Emergent Assembly Skills from Binary Task Rewards

NIST Assembly Task Board #1은 로봇 조작(robotic manipulation) 분야의 학습(training) 기반 방법론에 여전히 까다로운 벤치마크(benchmark)입니다. 단기적으로는 작고 정밀하게 맞물리는 부품에 대한 정밀하고 접촉이 빈번한 제어가 요구되며, 장기적으로는 확장된 행동 시퀀스 전반에 걸친 복구 및 조율 능력이 필요합니다. 그동안 데모(demonstration), 작업 분해, 조밀한 진행 보상(reward)은 조립 방법에 대한 지침을 제공함으로써 연구 발전을 이끌어왔습니다. 하지만 전략을 얼마나 구체적으로 명시해야 할까요? AlphaGo에서 AlphaGo Zero로의 발전은 대규모 강화학습(RL)이 이기는 방법을 규정하지 않고도 초인적인 전략을 발견할 수 있음을 보여주었습니다. AlphaNIST는 희소한 이진 작업 보상과 이러한 작업 무관(task-agnostic) 보상이 허용하는 작업 다양성을 통해 로봇이 유사하게 조립 방법을 스스로 발견할 수 있는지 묻습니다. 시뮬레이션 환경에서 데모, 진행 셰이핑(progress shaping), 스크립트 기반 프리미티브, 작업별 튜닝 없이 NIST Assembly Task Board #1의 전체 20개 조립 작업에 대해 단일 정책을 처음부터(from scratch) 학습시켜 98.2%의 전체 학습 성공률을 달성했습니다. 또한 본 프레임워크는 정해진 순서 없이 단일 에피소드에서 10개의 조립 쌍을 완료하도록 정책을 학습시키며, 작업 성공 보상은 10개 쌍이 모두 동시에 완료될 때만 주어집니다. 학습된 정책은 정교한 파지(grasping) 선택, 주변 형상을 활용한 부품 재정렬, 명시적 플래너 없이 한 부품을 준비하고 다른 부품을 조립한 뒤 다시 돌아와 첫 번째 부품을 완성하는 등 기민하고 계획(planning)과 유사한 행동을 발견합니다. 영상은 웹사이트(https://alpha-nist.github.io/)를 참조하십시오.

토론

이 논문과 연결된 포럼 글이 아직 없습니다.