Unsupervised Disaggregation of Water Heater Load from Smart Meter Data Processing
원문 초록
In the residential sector, electric water heaters are appliances with a relatively high power consumption and a significant thermal inertia, which is particularly suitable for Demand Response schemes. The success of efficient DR schemes via the control of water heaters presupposes an accurate estimate of their power demand at each instant. Although the load of water heaters is rarely directly measured, a large penetration of Smart Meters (SMs) in distribution grids enables to indirectly infer this information on a large scale via load disaggregation. For that purpose, a considerable number of Non-Intrusive Load Monitoring (NILM) approaches are suggested in the literature. However, they require data streams at a time resolution in the range of one second or higher, which is not realistic for standard SMs. Hence, this paper proposes an unsupervised approach to detect and disaggregate the load profile of water heaters from standard SM data with a time resolution in the minute range. Evaluated on multiple real loads with sub-metering, the proposed approach achieves a Normalized Mean Absolute Error (NMAE) lower than 2% and a precision generally higher than 92% with time resolutions between 5 and 15 minutes.
함께 살펴볼 논문
공통 태그를 근거로 연결했습니다. 실제 인용 관계나 논문의 우수성을 뜻하지 않습니다.
Industrial Energy Disaggregation with Digital Twin-generated Dataset and Efficient Data Augmentation
NILMFormer: Non-Intrusive Load Monitoring that Accounts for Non-Stationarity
Few Labels are all you need: A Weakly Supervised Framework for Appliance Localization in Smart-Meter Series
Toward Explainable NILM: Real-Time Event-Based NILM Framework for High-Frequency Data
MATNilm: Multi-appliance-task Non-intrusive Load Monitoring with Limited Labeled Data
Energy Efficient Deep Multi-Label ON/OFF Classification of Low Frequency Metered Home Appliances
토론
이 논문과 연결된 포럼 글이 아직 없습니다.