This paper examines the effects of hypercongestion mitigation by perimeter control and the introduction of autonomous vehicles on the spatial structures of cities. By incorporating a bathtub model, we develop a land use model where hypercongestion occurs in the downtown area and interacts with land use. We show that hypercongestion mitigation by perimeter control decreases the commuting cost in the short-run and results in a less dense urban spatial structure in the long-run. Furthermore, we reveal that the impact of autonomous vehicles depends on the presence of hypercongestion. Introduction of autonomous vehicles may increase the commuting cost in the presence of hypercongestion and cause a decrease in suburban population, but make cities spatially expanded outward.This result contradicts that of the standard bottleneck model. When perimeter control is implemented, the introduction of autonomous vehicles decreases the commuting cost and results in a less dense urban spatial structure. These results show that hypercongestion is a key factor that can change urban spatial structures.
Connected and autonomous vehicles (CAVs) can reduce human errors in traffic accidents, increase road efficiency, and execute various tasks ranging from delivery to smart city surveillance. Reaping these benefits requires CAVs to autonomously navigate to target destinations. To this end, each CAV's navigation controller must leverage the information collected by sensors and wireless systems for decision-making on longitudinal and lateral movements. However, enabling autonomous navigation for CAVs requires a convergent integration of communication, control, and learning systems. The goal of this article is to explicitly expose the challenges related to this convergence and propose solutions to address them in two major use cases: Uncoordinated and coordinated CAVs. In particular, challenges related to the navigation of uncoordinated CAVs include stable path tracking, robust control against cyber-physical attacks, and adaptive navigation controller design. Meanwhile, when multiple CAVs coordinate their movements during navigation, fundamental problems such as stable formation, fast collaborative learning, and distributed intrusion detection are analyzed. For both cases, solutions using the convergence of communication theory, control theory, and machine learning are proposed to enable effective and secure CAV navigation. Preliminary simulation results are provided to show the merits of proposed solutions.
Trajectory prediction modules are key enablers for safe and efficient planning of autonomous vehicles (AVs), particularly in highly interactive traffic scenarios. Recently, learning-based trajectory predictors have experienced considerable success in providing state-of-the-art performance due to their ability to learn multimodal behaviors of other agents from data. In this paper, we present an algorithm called multi-predictor fusion (MPF) that augments the performance of learning-based predictors by imbuing them with motion planners that are tasked with satisfying logic-based rules. MPF probabilistically combines learning- and rule-based predictors by mixing trajectories from both standalone predictors in accordance with a belief distribution that reflects the online performance of each predictor. In our results, we show that MPF outperforms the two standalone predictors on various metrics and delivers the most consistent performance.
Autonomous vehicles and Advanced Driving Assistance Systems (ADAS) have the potential to radically change the way we travel. Many such vehicles currently rely on segmentation and object detection algorithms to detect and track objects around its surrounding. The data collected from the vehicles are often sent to cloud servers to facilitate continual/life-long learning of these algorithms. Considering the bandwidth constraints, the data is compressed before sending it to servers, where it is typically decompressed for training and analysis. In this work, we propose the use of a learning-based compression Codec to reduce the overhead in latency incurred for the decompression operation in the standard pipeline. We demonstrate that the learned compressed representation can also be used to perform tasks like semantic segmentation in addition to decompression to obtain the images. We experimentally validate the proposed pipeline on the Cityscapes dataset, where we achieve a compression factor up to $66 \times$ while preserving the information required to perform segmentation with a dice coefficient of $0.84$ as compared to $0.88$ achieved using decompressed images while reducing the overall compute by $11\%$.
Inertial sensing is used in many applications and platforms, ranging from day-to-day devices such as smartphones to very complex ones such as autonomous vehicles. In recent years, the development of machine learning and deep learning techniques has increased significantly in the field of inertial sensing and sensor fusion. This is due to the development of efficient computing hardware and the accessibility of publicly available sensor data. These data-driven approaches mainly aim to empower model-based inertial sensing algorithms. To encourage further research in integrating deep learning with inertial navigation and fusion and to leverage their capabilities, this paper provides an in-depth review of deep learning methods for inertial sensing and sensor fusion. We discuss learning methods for calibration and denoising as well as approaches for improving pure inertial navigation and sensor fusion. The latter is done by learning some of the fusion filter parameters. The reviewed approaches are classified by the environment in which the vehicles operate: land, air, and sea. In addition, we analyze trends and future directions in deep learning-based navigation and provide statistical data on commonly used approaches.
Object detection in 3D is a crucial aspect in the context of autonomous vehicles and drones. However, prototyping detection algorithms is time-consuming and costly in terms of energy and environmental impact. To address these challenges, one can check the effectiveness of different models by training on a subset of the original training set. In this paper, we present a comparison of three algorithms for selecting such a subset - random sampling, random per class sampling, and our proposed MONSPeC (Maximum Object Number Sampling per Class). We provide empirical evidence for the superior effectiveness of random per class sampling and MONSPeC over basic random sampling. By replacing random sampling with one of the more efficient algorithms, the results obtained on the subset are more likely to transfer to the results on the entire dataset. The code is available at: https://github.com/vision-agh/monspec.
Object detection and segmentation are two core modules of an autonomous vehicle perception system. They should have high efficiency and low latency while reducing computational complexity. Currently, the most commonly used algorithms are based on deep neural networks, which guarantee high efficiency but require high-performance computing platforms. In the case of autonomous vehicles, i.e. cars, but also drones, it is necessary to use embedded platforms with limited computing power, which makes it difficult to meet the requirements described above. A reduction in the complexity of the network can be achieved by using an appropriate: architecture, representation (reduced numerical precision, quantisation, pruning), and computing platform. In this paper, we focus on the first factor - the use of so-called detection-segmentation networks as a component of a perception system. We considered the task of segmenting the drivable area and road markings in combination with the detection of selected objects (pedestrians, traffic lights, and obstacles). We compared the performance of three different architectures described in the literature: MultiTask V3, HybridNets, and YOLOP. We conducted the experiments on a custom dataset consisting of approximately 500 images of the drivable area and lane markings, and 250 images of detected objects. Of the three methods analysed, MultiTask V3 proved to be the best, achieving 99% mAP_50 for detection, 97% MIoU for drivable area segmentation, and 91% MIoU for lane segmentation, as well as 124 fps on the RTX 3060 graphics card. This architecture is a good solution for embedded perception systems for autonomous vehicles. The code is available at: https://github.com/vision-agh/MMAR_2023.
Localization is a fundamental task in robotics for autonomous navigation. Existing localization methods rely on a single input data modality or train several computational models to process different modalities. This leads to stringent computational requirements and sub-optimal results that fail to capitalize on the complementary information in other data streams. This paper proposes UnLoc, a novel unified neural modeling approach for localization with multi-sensor input in all weather conditions. Our multi-stream network can handle LiDAR, Camera and RADAR inputs for localization on demand, i.e., it can work with one or more input sensors, making it robust to sensor failure. UnLoc uses 3D sparse convolutions and cylindrical partitioning of the space to process LiDAR frames and implements ResNet blocks with a slot attention-based feature filtering module for the Radar and image modalities. We introduce a unique learnable modality encoding scheme to distinguish between the input sensor data. Our method is extensively evaluated on Oxford Radar RobotCar, ApolloSouthBay and Perth-WA datasets. The results ascertain the efficacy of our technique.
Most 6-DoF localization and SLAM systems use static landmarks but ignore dynamic objects because they cannot be usefully incorporated into a typical pipeline. Where dynamic objects have been incorporated, typical approaches have attempted relatively sophisticated identification and localization of these objects, limiting their robustness or general utility. In this research, we propose a middle ground, demonstrated in the context of autonomous vehicles, using dynamic vehicles to provide limited pose constraint information in a 6-DoF frame-by-frame PnP-RANSAC localization pipeline. We refine initial pose estimates with a motion model and propose a method for calculating the predicted quality of future pose estimates, triggered based on whether or not the autonomous vehicle's motion is constrained by the relative frame-to-frame location of dynamic vehicles in the environment. Our approach detects and identifies suitable dynamic vehicles to define these pose constraints to modify a pose filter, resulting in improved recall across a range of localization tolerances from $0.25m$ to $5m$, compared to a state-of-the-art baseline single image PnP method and its vanilla pose filtering. Our constraint detection system is active for approximately $35\%$ of the time on the Ford AV dataset and localization is particularly improved when the constraint detection is active.
Autonomous vehicles (AV) are expected to reshape future transportation systems, and decision-making is one of the critical modules toward high-level automated driving. To overcome those complicated scenarios that rule-based methods could not cope with well, data-driven decision-making approaches have aroused more and more focus. The datasets to be used in developing data-driven methods dramatically influences the performance of decision-making, hence it is necessary to have a comprehensive insight into the existing datasets. From the aspects of collection sources, driving data can be divided into vehicle, environment, and driver related data. This study compares the state-of-the-art datasets of these three categories and summarizes their features including sensors used, annotation, and driving scenarios. Based on the characteristics of the datasets, this survey also concludes the potential applications of datasets on various aspects of AV decision-making, assisting researchers to find appropriate ones to support their own research. The future trends of AV dataset development are summarized.
Reinforcement Learning (RL) has made promising progress in planning and decision-making for Autonomous Vehicles (AVs) in simple driving scenarios. However, existing RL algorithms for AVs fail to learn critical driving skills in complex urban scenarios. First, urban driving scenarios require AVs to handle multiple driving tasks of which conventional RL algorithms are incapable. Second, the presence of other vehicles in urban scenarios results in a dynamically changing environment, which challenges RL algorithms to plan the action and trajectory of the AV. In this work, we propose an action and trajectory planner using Hierarchical Reinforcement Learning (atHRL) method, which models the agent behavior in a hierarchical model by using the perception of the lidar and birdeye view. The proposed atHRL method learns to make decisions about the agent's future trajectory and computes target waypoints under continuous settings based on a hierarchical DDPG algorithm. The waypoints planned by the atHRL model are then sent to a low-level controller to generate the steering and throttle commands required for the vehicle maneuver. We empirically verify the efficacy of atHRL through extensive experiments in complex urban driving scenarios that compose multiple tasks with the presence of other vehicles in the CARLA simulator. The experimental results suggest a significant performance improvement compared to the state-of-the-art RL methods.
Autonomous systems (AS) are systems that can adapt and change their behavior in response to unanticipated events and include systems such as aerial drones, autonomous vehicles, and ground/aquatic robots. AS require a wide array of sensors, deep-learning models, and powerful hardware platforms to perceive and safely operate in real-time. However, in many contexts, some sensing modalities negatively impact perception while increasing the system's overall energy consumption. Since AS are often energy-constrained edge devices, energy-efficient sensor fusion methods have been proposed. However, existing methods either fail to adapt to changing scenario conditions or to optimize energy efficiency system-wide. We propose CARMA: a context-aware sensor fusion approach that uses context to dynamically reconfigure the computation flow on a Field-Programmable Gate Array (FPGA) at runtime. By clock-gating unused sensors and model sub-components, CARMA significantly reduces the energy used by a multi-sensory object detector without compromising performance. We use a Deep-learning Processor Unit (DPU) based reconfiguration approach to minimize the latency of model reconfiguration. We evaluate multiple context-identification strategies, propose a novel system-wide energy-performance joint optimization, and evaluate scenario-specific perception performance. Across challenging real-world sensing contexts, CARMA outperforms state-of-the-art methods with up to 1.3x speedup and 73% lower energy consumption.
Neural networks (NNs) are increasingly applied in safety-critical systems such as autonomous vehicles. However, they are fragile and are often ill-behaved. Consequently, their behaviors should undergo rigorous guarantees before deployment in practice. In this paper, we propose a set-boundary reachability method to investigate the safety verification problem of NNs from a topological perspective. Given an NN with an input set and a safe set, the safety verification problem is to determine whether all outputs of the NN resulting from the input set fall within the safe set. In our method, the homeomorphism property and the open map property of NNs are mainly exploited, which establish rigorous guarantees between the boundaries of the input set and the boundaries of the output set. The exploitation of these two properties facilitates reachability computations via extracting subsets of the input set rather than the entire input set, thus controlling the wrapping effect in reachability analysis and facilitating the reduction of computation burdens for safety verification. The homeomorphism property exists in some widely used NNs such as invertible residual networks (i-ResNets) and Neural ordinary differential equations (Neural ODEs), and the open map is a less strict property and easier to satisfy compared with the homeomorphism property. For NNs establishing either of these properties, our set-boundary reachability method only needs to perform reachability analysis on the boundary of the input set. Moreover, for NNs that do not feature these properties with respect to the input set, we explore subsets of the input set for establishing the local homeomorphism property and then abandon these subsets for reachability computations. Finally, some examples demonstrate the performance of the proposed method.
Autonomous vehicles require motion forecasting of their surrounding multiagents (pedestrians and vehicles) to make optimal decisions for navigation. The existing methods focus on techniques to utilize the positions and velocities of these agents and fail to capture semantic information from the scene. Moreover, to mitigate the increase in computational complexity associated with the number of agents in the scene, some works leverage Euclidean distance to prune far-away agents. However, distance-based metric alone is insufficient to select relevant agents and accurately perform their predictions. To resolve these issues, we propose the Semantics-aware Interactive Multiagent Motion Forecasting (SIMMF) method to capture semantics along with spatial information and optimally select relevant agents for motion prediction. Specifically, we achieve this by implementing a semantic-aware selection of relevant agents from the scene and passing them through an attention mechanism to extract global encodings. These encodings along with agents' local information, are passed through an encoder to obtain time-dependent latent variables for a motion policy predicting the future trajectories. Our results show that the proposed approach outperforms state-of-the-art baselines and provides more accurate and scene-consistent predictions.
In this paper, a cooperative decision-making is presented, which is suitable for intention-aware automated vehicle functions. With an increasing number of highly automated and autonomous vehicles on public roads, trust is a very important issue regarding their acceptance in our society. The most challenging scenarios arise at low driving speeds of these highly automated and autonomous vehicles, where interactions with vulnerable road users likely occur. Such interactions must be addressed by the automation of the vehicle. The novelties of this paper are the adaptation of a general cooperative and shared control framework to this novel use case and the application of an explicit prediction model of the pedestrian. An extensive comparison with state-of-the-art algorithms is provided in a simplified test environment. The results show the superiority of the proposed model-based algorithm compared to state-of-the-art solutions and its suitability for real-world applications due to its real-time capability.
Generating safety-critical scenarios is essential for testing and verifying the safety of autonomous vehicles. Traditional optimization techniques suffer from the curse of dimensionality and limit the search space to fixed parameter spaces. To address these challenges, we propose a deep reinforcement learning approach that generates scenarios by sequential editing, such as adding new agents or modifying the trajectories of the existing agents. Our framework employs a reward function consisting of both risk and plausibility objectives. The plausibility objective leverages generative models, such as a variational autoencoder, to learn the likelihood of the generated parameters from the training datasets; It penalizes the generation of unlikely scenarios. Our approach overcomes the dimensionality challenge and explores a wide range of safety-critical scenarios. Our evaluation demonstrates that the proposed method generates safety-critical scenarios of higher quality compared with previous approaches.
Video analysis is a computer vision task that is useful for many applications like surveillance, human-machine interaction, and autonomous vehicles. Deep Convolutional Neural Networks (CNNs) are currently the state-of-the-art methods for video analysis. However they have high computational costs, and need a large amount of labeled data for training. In this paper, we use Convolutional Spiking Neural Networks (CSNNs) trained with the unsupervised Spike Timing-Dependent Plasticity (STDP) learning rule for action classification. These networks represent the information using asynchronous low-energy spikes. This allows the network to be more energy efficient and neuromorphic hardware-friendly. However, the behaviour of CSNNs is not studied enough with spatio-temporal computer vision models. Therefore, we explore transposing two-stream neural networks into the spiking domain. Implementing this model with unsupervised STDP-based CSNNs allows us to further study the performance of these networks with video analysis. In this work, we show that two-stream CSNNs can successfully extract spatio-temporal information from videos despite using limited training data, and that the spiking spatial and temporal streams are complementary. We also show that using a spatio-temporal stream within a spiking STDP-based two-stream architecture leads to information redundancy and does not improve the performance.
Autonomous vehicles and driving systems use scene parsing as an essential tool to understand the surrounding environment. Panoptic segmentation is a state-of-the-art technique which proves to be pivotal in this use case. Deep learning-based architectures have been utilized for effective and efficient Panoptic Segmentation in recent times. However, when it comes to adverse conditions like dark scenes with poor illumination or nighttime images, existing methods perform poorly in comparison to daytime images. One of the main factors for poor results is the lack of sufficient and accurately annotated nighttime images for urban driving scenes. In this work, we propose two new methods, first to improve the performance, and second to improve the robustness of panoptic segmentation in nighttime or poor illumination urban driving scenes using a domain translation approach. The proposed approach makes use of CycleGAN (Zhu et al., 2017) to translate daytime images with existing panoptic annotations into nighttime images, which are then utilized to retrain a Panoptic segmentation model to improve performance and robustness under poor illumination and nighttime conditions. In our experiments, Approach-1 demonstrates a significant improvement in the Panoptic segmentation performance on the converted Cityscapes dataset with more than +10% PQ, +12% RQ, +2% SQ, +14% mIoU and +10% AP50 absolute gain. Approach-2 demonstrates improved robustness to varied nighttime driving environments. Both the approaches are supported via comprehensive quantitative and qualitative analysis.
Anticipatory thinking drives our ability to manage risk - identification and mitigation - in everyday life, from bringing an umbrella when it might rain to buying car insurance. As AI systems become part of everyday life, they too have begun to manage risk. Autonomous vehicles log millions of miles, StarCraft and Go agents have similar capabilities to humans, implicitly managing risks presented by their opponents. To further increase performance in these tasks, out-of-distribution evaluation can characterize a model's bias, what we view as a type of risk management. However, learning to identify and mitigate low-frequency, high-impact risks is at odds with the observational bias required to train machine learning models. StarCraft and Go are closed-world domains whose risks are known and mitigations well documented, ideal for learning through repetition. Adversarial filtering datasets provide difficult examples but are laborious to curate and static, both barriers to real-world risk management. Adversarial robustness focuses on model poisoning under the assumption there is an adversary with malicious intent, without considering naturally occurring adversarial examples. These methods are all important steps towards improving risk management but do so without considering open-worlds. We unify these open-world risk management challenges with two contributions. The first is our perception challenges, designed for agents with imperfect perceptions of their environment whose consequences have a high impact. Our second contribution are cognition challenges, designed for agents that must dynamically adjust their risk exposure as they identify new risks and learn new mitigations. Our goal with these challenges is to spur research into solutions that assess and improve the anticipatory thinking required by AI agents to manage risk in open-worlds and ultimately the real-world.
Accurately perceiving instances and predicting their future motion are key tasks for autonomous vehicles, enabling them to navigate safely in complex urban traffic. While bird's-eye view (BEV) representations are commonplace in perception for autonomous driving, their potential in a motion prediction setting is less explored. Existing approaches for BEV instance prediction from surround cameras rely on a multi-task auto-regressive setup coupled with complex post-processing to predict future instances in a spatio-temporally consistent manner. In this paper, we depart from this paradigm and propose an efficient novel end-to-end framework named POWERBEV, which differs in several design choices aimed at reducing the inherent redundancy in previous methods. First, rather than predicting the future in an auto-regressive fashion, POWERBEV uses a parallel, multi-scale module built from lightweight 2D convolutional networks. Second, we show that segmentation and centripetal backward flow are sufficient for prediction, simplifying previous multi-task objectives by eliminating redundant output modalities. Building on this output representation, we propose a simple, flow warping-based post-processing approach which produces more stable instance associations across time. Through this lightweight yet powerful design, POWERBEV outperforms state-of-the-art baselines on the NuScenes Dataset and poses an alternative paradigm for BEV instance prediction. We made our code publicly available at: https://github.com/EdwardLeeLPZ/PowerBEV.