Computing platforms in autonomous vehicles record large amounts of data from many sensors, process the data through machine learning models, and make decisions to ensure the vehicle's safe operation. Fast, accurate, and reliable decision-making is critical. Traditional computer processors lack the power and flexibility needed for the perception and machine vision demands of advanced autonomous driving tasks. Hardware accelerators are special-purpose coprocessors that help autonomous vehicles meet performance requirements for higher levels of autonomy. This paper provides an overview of ML accelerators with examples of their use for machine vision in autonomous vehicles. We offer recommendations for researchers and practitioners and highlight a trajectory for ongoing and future research in this emerging field.
Robust pedestrian trajectory forecasting is crucial to developing safe autonomous vehicles. Although previous works have studied adversarial robustness in the context of trajectory forecasting, some significant issues remain unaddressed. In this work, we try to tackle these crucial problems. Firstly, the previous definitions of robustness in trajectory prediction are ambiguous. We thus provide formal definitions for two kinds of robustness, namely label robustness and pure robustness. Secondly, as previous works fail to consider robustness about all points in a disturbance interval, we utilise a probably approximately correct (PAC) framework for robustness verification. Additionally, this framework can not only identify potential counterexamples, but also provides interpretable analyses of the original methods. Our approach is applied using a prototype tool named TrajPAC. With TrajPAC, we evaluate the robustness of four state-of-the-art trajectory prediction models -- Trajectron++, MemoNet, AgentFormer, and MID -- on trajectories from five scenes of the ETH/UCY dataset and scenes of the Stanford Drone Dataset. Using our framework, we also experimentally study various factors that could influence robustness performance.
In this paper, we assess the state of the art in pedestrian trajectory prediction within the context of generating single trajectories, a critical aspect aligning with the requirements in autonomous systems. The evaluation is conducted on the widely-used ETH/UCY dataset where the Average Displacement Error (ADE) and the Final Displacement Error (FDE) are reported. Alongside this, we perform an ablation study to investigate the impact of the observed motion history on prediction performance. To evaluate the scalability of each approach when confronted with varying amounts of agents, the inference time of each model is measured. Following a quantitative analysis, the resulting predictions are compared in a qualitative manner, giving insight into the strengths and weaknesses of current approaches. The results demonstrate that although a constant velocity model (CVM) provides a good approximation of the overall dynamics in the majority of cases, additional features need to be incorporated to reflect common pedestrian behavior observed. Therefore, this study presents a data-driven analysis with the intent to guide the future development of pedestrian trajectory prediction algorithms.
In recent years there have been remarkable advancements in autonomous driving. While autonomous vehicles demonstrate high performance in closed-set conditions, they encounter difficulties when confronted with unexpected situations. At the same time, world models emerged in the field of model-based reinforcement learning as a way to enable agents to predict the future depending on potential actions. This led to outstanding results in sparse reward and complex control tasks. This work provides an overview of how world models can be leveraged to perform anomaly detection in the domain of autonomous driving. We provide a characterization of world models and relate individual components to previous works in anomaly detection to facilitate further research in the field.
Environmental perception is a key element of autonomous driving because the information received from the perception module influences core driving decisions. An outstanding challenge in real-time perception for autonomous driving lies in finding the best trade-off between detection quality and latency. Major constraints on both computation and power have to be taken into account for real-time perception in autonomous vehicles. Larger object detection models tend to produce the best results, but are also slower at runtime. Since the most accurate detectors cannot run in real-time locally, we investigate the possibility of offloading computation to edge and cloud platforms, which are less resource-constrained. We create a synthetic dataset to train object detection models and evaluate different offloading strategies. Using real hardware and network simulations, we compare different trade-offs between prediction quality and end-to-end delay. Since sending raw frames over the network implies additional transmission delays, we also explore the use of JPEG and H.265 compression at varying qualities and measure their impact on prediction metrics. We show that models with adequate compression can be run in real-time on the cloud while outperforming local detection performance.
Platooning connected and autonomous vehicles (CAVs) provide significant benefits in terms of traffic efficiency and fuel economy. However, most existing platooning systems assume the availability of pre-determined plans, which is not feasible in real-time scenarios. In this paper, we address this issue in time-dependent networks by formulating a Markov decision process at each junction, aiming to minimize travel time and fuel consumption. Initially, we analyze coordinated platooning without routing to explore the cooperation among controllers on an identical path. We propose two novel approaches based on approximate dynamic programming, offering suboptimal control in the context of a stochastic finite horizon problem. The results demonstrate the superiority of the approximation in the policy space. Furthermore, we investigate platooning in a network setting, where speed profiles and routes are determined simultaneously. To simplify the problem, we decouple the action space by prioritizing routing decisions based on travel time estimation. We subsequently employ the aforementioned policy approximation to determine speed profiles, considering essential parameters such as travel times. Our simulation results in SUMO indicate that our method yields better performance than conventional approaches, leading to potential travel cost savings of up to 40%. Additionally, we evaluate the resilience of our approach in dynamically changing networks, affirming its ability to maintain efficient platooning operations.
LiDAR-based 3D detection plays a vital role in autonomous navigation. Surprisingly, although autonomous vehicles (AVs) must detect both near-field objects (for collision avoidance) and far-field objects (for longer-term planning), contemporary benchmarks focus only on near-field 3D detection. However, AVs must detect far-field objects for safe navigation. In this paper, we present an empirical analysis of far-field 3D detection using the long-range detection dataset Argoverse 2.0 to better understand the problem, and share the following insight: near-field LiDAR measurements are dense and optimally encoded by small voxels, while far-field measurements are sparse and are better encoded with large voxels. We exploit this observation to build a collection of range experts tuned for near-vs-far field detection, and propose simple techniques to efficiently ensemble models for long-range detection that improve efficiency by 33% and boost accuracy by 3.2% CDS.
Motion prediction is a challenging task for autonomous vehicles due to uncertainty in the sensor data, the non-deterministic nature of future, and complex behavior of agents. In this paper, we tackle this problem by representing the scene as dynamic occupancy grid maps (DOGMs), associating semantic labels to the occupied cells and incorporating map information. We propose a novel framework that combines deep-learning-based spatio-temporal and probabilistic approaches to predict vehicle behaviors.Contrary to the conventional OGM prediction methods, evaluation of our work is conducted against the ground truth annotations. We experiment and validate our results on real-world NuScenes dataset and show that our model shows superior ability to predict both static and dynamic vehicles compared to OGM predictions. Furthermore, we perform an ablation study and assess the role of semantic labels and map in the architecture.
A major challenge in autonomous driving is designing control architectures that guarantee safety in all relevant driving scenarios. Given a safe desired reference trajectory for the vehicle, a trajectory following controller has to ensure that the trajectory is followed with a maximally allowed deviation, even in the presence of external disturbances, such as wind gusts or inclined roads. In this paper, a method for computing upper bounds for linear, time invariant single-input-multiple-output systems with state feedback controllers and additive bounded disturbances is proposed. The bounds for the offset between states and the reference are derived analytically based on worst case disturbance sequences. For systems with two states the bounds are strict, while for higher order systems they are conservative. The method is applied to obtain position bounds for lateral trajectory following controllers, and to analyze how different choices of feedback parameters affect safety margins.
Connected and autonomous vehicles (CAVs) promise next-gen transportation systems with enhanced safety, energy efficiency, and sustainability. One typical control strategy for CAVs is the so-called cooperative adaptive cruise control (CACC) where vehicles drive in platoons and cooperate to achieve safe and efficient transportation. In this study, we formulate CACC as a multi-agent reinforcement learning (MARL) problem. Diverging from existing MARL methods that use centralized training and decentralized execution which require not only a centralized communication mechanism but also dense inter-agent communication during training and online adaptation, we propose a fully decentralized MARL framework for enhanced efficiency and scalability. In addition, a quantization-based communication scheme is proposed to reduce the communication overhead without significantly degrading the control performance. This is achieved by employing randomized rounding numbers to quantize each piece of communicated information and only communicating non-zero components after quantization. Extensive experimentation in two distinct CACC settings reveals that the proposed MARL framework consistently achieves superior performance over several contemporary benchmarks in terms of both communication efficiency and control efficacy. In the appendix, we show that our proposed framework's applicability extends beyond CACC, showing promise for broader intelligent transportation systems with intricate action and state spaces.
Autonomous vehicles and robots need to operate over a wide variety of scenarios in order to complete tasks efficiently and safely. Multi-camera self-supervised monocular depth estimation from videos is a promising way to reason about the environment, as it generates metrically scaled geometric predictions from visual data without requiring additional sensors. However, most works assume well-calibrated extrinsics to fully leverage this multi-camera setup, even though accurate and efficient calibration is still a challenging problem. In this work, we introduce a novel method for extrinsic calibration that builds upon the principles of self-supervised monocular depth and ego-motion learning. Our proposed curriculum learning strategy uses monocular depth and pose estimators with velocity supervision to estimate extrinsics, and then jointly learns extrinsic calibration along with depth and pose for a set of overlapping cameras rigidly attached to a moving vehicle. Experiments on a benchmark multi-camera dataset (DDAD) demonstrate that our method enables self-calibration in various scenes robustly and efficiently compared to a traditional vision-based pose estimation pipeline. Furthermore, we demonstrate the benefits of extrinsics self-calibration as a way to improve depth prediction via joint optimization.
Autonomous Vehicles (AVs) promise a range of societal advantages, including broader access to mobility, reduced road accidents, and enhanced transportation efficiency. However, evaluating the risks linked to AVs is complex due to limited historical data and the swift progression of technology. This paper presents a data-driven framework for assessing the risk of different AVs' behaviors in various operational design domains (ODDs), based on counterfactual simulations of "misbehaving" road users. We propose the notion of counterfactual safety margin, which represents the minimum deviation from nominal behavior that could cause a collision. This methodology not only pinpoints the most critical scenarios but also quantifies the (relative) risk's frequency and severity concerning AVs. Importantly, we show that our approach is applicable even when the AV's behavioral policy remains undisclosed, through worst- and best-case analyses, benefiting external entities like regulators and risk evaluators. Our experimental outcomes demonstrate the correlation between the safety margin, the quality of the driving policy, and the ODD, shedding light on the relative risks of different AV providers. Overall, this work contributes to the safety assessment of AVs and addresses legislative and insurance concerns surrounding this burgeoning technology.
Visual Geo-localization (VG) is a critical research area for identifying geo-locations from visual inputs, particularly in autonomous navigation for robotics and vehicles. Current VG methods often learn feature extractors from geo-labeled images to create dense, geographically relevant representations. Recent advances in Self-Supervised Learning (SSL) have demonstrated its capability to achieve performance on par with supervised techniques with unlabeled images. This study presents a novel VG-SSL framework, designed for versatile integration and benchmarking of diverse SSL methods for representation learning in VG, featuring a unique geo-related pair strategy, GeoPair. Through extensive performance analysis, we adapt SSL techniques to improve VG on datasets from hand-held and car-mounted cameras used in robotics and autonomous vehicles. Our results show that contrastive learning and information maximization methods yield superior geo-specific representation quality, matching or surpassing the performance of state-of-the-art VG techniques. To our knowledge, This is the first benchmarking study of SSL in VG, highlighting its potential in enhancing geo-specific visual representations for robotics and autonomous vehicles. The code is publicly available at https://github.com/arplaboratory/VG-SSL.
A traffic system is a random and complex large system, which is difficult to conduct repeated modelling and control research in a real traffic environment. With the development of automatic driving technology, the requirements for testing and evaluating the development of automatic driving technology are getting higher and higher, so the application of computer technology for traffic simulation has become a very effective technical means. Based on the micro-traffic flow modelling, this paper adopts the vehicle motion model based on cellular automata and the theory of bicycle intelligence to build the simulation environment of autonomous vehicle flow. The architecture of autonomous vehicles is generally divided into a perception system, decision system and control system. The perception system is generally divided into many subsystems, responsible for autonomous vehicle positioning, obstacle recognition, traffic signal detection and recognition and other tasks. Decision systems are typically divided into many subsystems that are responsible for tasks such as path planning, path planning, behavior selection, motion planning, and control. The control system is the basis of the selfdriving car, and each control system of the vehicle needs to be connected with the decision-making system through the bus, and can accurately control the acceleration degree, braking degree, steering amplitude, lighting control and other driving actions according to the bus instructions issued by the decision-making system, so as to achieve the autonomous driving of the vehicle.
This study addresses a large-scale multimodal transit network design problem, with Shared Autonomous Mobility Services (SAMS) as both transit feeders and an origin-to-destination mode. The framework captures spatial demand and modal characteristics, considers intermodal transfers and express services, determines transit infrastructure investment and path flows, and generates transit routes. A system-optimal multimodal transit network is designed with minimum total door-to-door generalized costs of users and operators, satisfying transit origin-destination demand within a pre-set infrastructure budget. Firstly, the geography, demand, and modes in each zone are characterized with continuous approximation. The decisions of network link investment and multimodal path flows in zonal connection optimization are formulated as a minimum-cost multi-commodity network flow (MCNF) problem and solved efficiently with a mixed-integer linear programming (MILP) solver. Subsequently, the route generation problem is solved by expanding the MCNF formulation to minimize intramodal transfers. The model is illustrated through a set of experiments with the Chicago network comprised of 50 zones and seven modes, under three scenarios. The computational results present savings in traveler journey time and operator cost demonstrating the potential benefits of collaboration between multimodal transit systems and SAMS.
For driver observation frameworks, clean datasets collected in controlled simulated environments often serve as the initial training ground. Yet, when deployed under real driving conditions, such simulator-trained models quickly face the problem of distributional shifts brought about by changing illumination, car model, variations in subject appearances, sensor discrepancies, and other environmental alterations. This paper investigates the viability of transferring video-based driver observation models from simulation to real-world scenarios in autonomous vehicles, given the frequent use of simulation data in this domain due to safety issues. To achieve this, we record a dataset featuring actual autonomous driving conditions and involving seven participants engaged in highly distracting secondary activities. To enable direct SIM to REAL transfer, our dataset was designed in accordance with an existing large-scale simulator dataset used as the training source. We utilize the Inflated 3D ConvNet (I3D) model, a popular choice for driver observation, with Gradient-weighted Class Activation Mapping (Grad-CAM) for detailed analysis of model decision-making. Though the simulator-based model clearly surpasses the random baseline, its recognition quality diminishes, with average accuracy dropping from 85.7% to 46.6%. We also observe strong variations across different behavior classes. This underscores the challenges of model transferability, facilitating our research of more robust driver observation systems capable of dealing with real driving conditions.
Object detection is essential to many perception algorithms used in modern robotics applications. Unfortunately, the existing models share a tendency to assign high confidence scores for out-of-distribution (OOD) samples. Although OOD detection has been extensively studied in recent years by the computer vision (CV) community, most proposed solutions apply only to the image recognition task. Real-world applications such as perception in autonomous vehicles struggle with far more complex challenges than classification. In our work, we focus on the prevalent field of object detection, introducing Neuron Activation PaTteRns for out-of-distribution samples detection in Object detectioN (NAPTRON). Performed experiments show that our approach outperforms state-of-the-art methods, without the need to affect in-distribution (ID) performance. By evaluating the methods in two distinct OOD scenarios and three types of object detectors we have created the largest open-source benchmark for OOD object detection.
Electric autonomous vehicles (EAVs) are getting attention in future autonomous mobility-on-demand (AMoD) systems due to their economic and societal benefits. However, EAVs' unique charging patterns (long charging time, high charging frequency, unpredictable charging behaviors, etc.) make it challenging to accurately predict the EAVs supply in E-AMoD systems. Furthermore, the mobility demand's prediction uncertainty makes it an urgent and challenging task to design an integrated vehicle balancing solution under supply and demand uncertainties. Despite the success of reinforcement learning-based E-AMoD balancing algorithms, state uncertainties under the EV supply or mobility demand remain unexplored. In this work, we design a multi-agent reinforcement learning (MARL)-based framework for EAVs balancing in E-AMoD systems, with adversarial agents to model both the EAVs supply and mobility demand uncertainties that may undermine the vehicle balancing solutions. We then propose a robust E-AMoD Balancing MARL (REBAMA) algorithm to train a robust EAVs balancing policy to balance both the supply-demand ratio and charging utilization rate across the whole city. Experiments show that our proposed robust method performs better compared with a non-robust MARL method that does not consider state uncertainties; it improves the reward, charging utilization fairness, and supply-demand fairness by 19.28%, 28.18%, and 3.97%, respectively. Compared with a robust optimization-based method, the proposed MARL algorithm can improve the reward, charging utilization fairness, and supply-demand fairness by 8.21%, 8.29%, and 9.42%, respectively.
Accurately detecting and predicting lane change (LC)processes can help autonomous vehicles better understand their surrounding environment, recognize potential safety hazards, and improve traffic safety. This paper focuses on LC processes and compares different machine learning methods' performance to recognize LC intention from high-dimensionality time series data. To validate the performance of the proposed models, a total number of 1023 vehicle trajectories is extracted from the CitySim dataset. For LC intention recognition issues, the results indicate that with ninety-eight percent of classification accuracy, ensemble methods reduce the impact of Type II and Type III classification errors. Without sacrificing recognition accuracy, the LightGBM demonstrates a sixfold improvement in model training efficiency than the XGBoost algorithm.
Accurate 3D human pose estimation (3D HPE) is crucial for enabling autonomous vehicles (AVs) to make informed decisions and respond proactively in critical road scenarios. Promising results of 3D HPE have been gained in several domains such as human-computer interaction, robotics, sports and medical analytics, often based on data collected in well-controlled laboratory environments. Nevertheless, the transfer of 3D HPE methods to AVs has received limited research attention, due to the challenges posed by obtaining accurate 3D pose annotations and the limited suitability of data from other domains. We present a simple yet efficient weakly supervised approach for 3D HPE in the AV context by employing a high-level sensor fusion between camera and LiDAR data. The weakly supervised setting enables training on the target datasets without any 2D/3D keypoint labels by using an off-the-shelf 2D joint extractor and pseudo labels generated from LiDAR to image projections. Our approach outperforms state-of-the-art results by up to $\sim$ 13% on the Waymo Open Dataset in the weakly supervised setting and achieves state-of-the-art results in the supervised setting.