PyTorchKR Papers

최신 논문

총 564편
태그·기간 등 상세 필터

카테고리 탐색

로그인 후 이 태그 구독

arXiv:2412.04074

Integrated Sensing and Communications for Low-Altitude Economy: A Deep Reinforcement Learning Approach

This paper studies an integrated sensing and communications (ISAC) system for low-altitude economy (LAE), where a ground base station (GBS) provides communication and navigation services for authorized unmanned aerial vehicles (UAVs), while sensing the low-altitude airspace to monitor the unauthorized mobile target. The expected communication sum-rate over a given flight period is maximized by jointly optimizing the beamforming at the GBS and UAVs' trajectories, subject to the constraints on the average signal-to-noise ratio requirement for sensing, the flight mission and collision avoidance of UAVs, as well as the maximum transmit power at the GBS. Typically, this is a sequential decision-making problem with the given flight mission. Thus, we transform it to a specific Markov decision process (MDP) model called episode task. Based on this modeling, we propose a novel LAE-oriented ISAC scheme, referred to as Deep LAE-ISAC (DeepLSC), by leveraging the deep reinforcement learning (DRL) technique. In DeepLSC, a reward function and a new action selection policy termed constrained noise-exploration policy are judiciously designed to fulfill various constraints. To enable efficient learning in episode tasks, we develop a hierarchical experience replay mechanism, where the gist is to employ all experiences generated within each episode to jointly train the neural network. Besides, to enhance the convergence speed of DeepLSC, a symmetric experience augmentation mechanism, which simultaneously permutes the indexes of all variables to enrich available experience sets, is proposed. Simulation results demonstrate that compared with benchmarks, DeepLSC yields a higher sum-rate while meeting the preset constraints, achieves faster convergence, and is more robust against different settings.

arXiv:2412.03887

MOANA: Multi-Radar Dataset for Maritime Odometry and Autonomous Navigation Application

Maritime environmental sensing requires overcoming challenges from complex conditions such as harsh weather, platform perturbations, large dynamic objects, and the requirement for long detection ranges. While cameras and LiDAR are commonly used in ground vehicle navigation, their applicability in maritime settings is limited by range constraints and hardware maintenance issues. Radar sensors, however, offer robust long-range detection capabilities and resilience to physical contamination from weather and saline conditions, making it a powerful sensor for maritime navigation. Among various radar types, X-band radar is widely employed for maritime vessel navigation, providing effective long-range detection essential for situational awareness and collision avoidance. Nevertheless, it exhibits limitations during berthing operations where near-field detection is critical. To address this shortcoming, we incorporate W-band radar, which excels in detecting nearby objects with a higher update rate. We present a comprehensive maritime sensor dataset featuring multi-range detection capabilities. This dataset integrates short-range LiDAR data, medium-range W-band radar data, and long-range X-band radar data into a unified framework. Additionally, it includes object labels for oceanic object detection usage, derived from radar and stereo camera images. The dataset comprises seven sequences collected from diverse regions with varying levels of \bl{navigation algorithm} estimation difficulty, ranging from easy to challenging, and includes common locations suitable for global localization tasks. This dataset serves as a valuable resource for advancing research in place recognition, odometry estimation, SLAM, object detection, and dynamic object elimination within maritime environments. Dataset can be found at https://sites.google.com/view/rpmmoana.

arXiv:2412.01235

Real-time Traffic Simulation and Management for Large-scale Urban Air Mobility: Integrating Route Guidance and Collision Avoidance

Given the spatial heterogeneity of land use patterns in most cities, large-scale UAM will likely be deployed in specific areas, e.g., inter-transfer traffic between suburbs and city centers. However, large-scale UAM operations connecting multiple origin-destination pairs raise concerns about air traffic safety and efficiency with respect to conflict movements, particularly at large conflict points similar to roadway junctions. In this work, we propose an operational framework that integrates route guidance and collision avoidance to achieve an elegant trade-off between air traffic safety and efficiency. The route guidance mechanism aims to optimize aircraft distribution across both spatial and temporal dimensions by regulating their paths (composed of waypoints). Given the optimized paths, the collision avoidance module aims to generate collision-free aircraft trajectories between waypoints in 3D space. To enable large-scale operations, we develop a fast approximation method to solve the optimal path planning problem and employ the velocity obstacle model for collision avoidance. The proposed route guidance strategy significantly reduces the computational requirements for collision avoidance. As far as we know, this work is one of the first to combine route guidance and collision avoidance for UAM. The results indicate that the framework can enable efficient and flexible UAM operations, such as air traffic assignment, congestion prevention, and dynamic airspace clearance. Compared to the management scheme based on air corridors, the proposed framework has considerable improvements in computational efficiency (433%), average travel speed (70.2%), and trip completion rate (130%). The proposed framework has demonstrated great potential for real-time traffic simulation and management in large-scale UAM systems.

arXiv:2412.00396

ARMOR: Egocentric Perception for Humanoid Robot Collision Avoidance and Motion Planning

Humanoid robots have significant gaps in their sensing and perception, making it hard to perform motion planning in dense environments. To address this, we introduce ARMOR, a novel egocentric perception system that integrates both hardware and software, specifically incorporating wearable-like depth sensors for humanoid robots. Our distributed perception approach enhances the robot's spatial awareness, and facilitates more agile motion planning. We also train a transformer-based imitation learning (IL) policy in simulation to perform dynamic collision avoidance, by leveraging around 86 hours worth of human realistic motions from the AMASS dataset. We show that our ARMOR perception is superior against a setup with multiple dense head-mounted, and externally mounted depth cameras, with a 63.7% reduction in collisions, and 78.7% improvement on success rate. We also compare our IL policy against a sampling-based motion planning expert cuRobo, showing 31.6% less collisions, 16.9% higher success rate, and 26x reduction in computational latency. Lastly, we deploy our ARMOR perception on our real-world GR1 humanoid from Fourier Intelligence. We are going to update the link to the source code, HW description, and 3D CAD files in the arXiv version of this text.

arXiv:2411.19568

Mixed-Integer Linear Programming Model for Collision Avoidance Planning in Commercial Aircraft Formations

With advancements in technology, commercial aircraft formation flying is becoming increasingly feasible as an efficient and environmentally friendly flight method. However, gaps remain in practical implementation, particularly in collision avoidance for aircraft formations. Existing avoidance algorithms mainly focus on single aircraft or UAV swarms, lacking comprehensive studies on the complex interactions within commercial aircraft formations. To address this, this paper proposes an optimization model designed to generate safe and effective collision avoidance solutions for commercial aircraft formations. This model demonstrates avoidance paths for formations facing intruders and offers insights for developing formation flight strategies. This study explores response strategies for commercial aircraft formations encountering intruders, considering the difficulty of pilot maneuvers. The findings provide theoretical support for the practical implementation of commercial formation flying and may advance the adoption of this technology.

arXiv:2411.17552

Ensuring Safety in Target Pursuit Control: A CBF-Safe Reinforcement Learning Approach

This paper addresses the target-pursuit problem, aiming to ensure each pursuer's safety regarding collision avoidance, sensing range, and input saturation. An input-constrained CBF is proposed to dynamically regulate the pursuer's control, ensuring effective target pursuit even when the target performs evasive maneuvers. To further ensure safety, two sets of CBF constraints are designed to regulate the pursuer's position, enabling it to keep the target within the sensing range while avoiding collision in complex environments with external disturbances. These three CBFs collectively form our safety filter, which filters unsafe outputs from RL by solving a Quadratic Program (QP). Finally, the safety filter, combined with a switch strategy that enhances the feasibility of solving its QP, constitutes the Control Barrier Function (CBF)-Safe Reinforcement Learning (CSRL) algorithm, whose solutions are proven to satisfy the Karush-Kuhn-Tucker (KKT) conditions for all safety constraints. Simulation results validate the effectiveness of the CSRL algorithm, demonstrating its ability to handle complex pursuit scenarios while maintaining safety and improving control performance.

arXiv:2411.17079공식 코드 · Papers with Code

Zero-Order Control Barrier Functions for Sampled-Data Systems with State and Input Dependent Safety Constraints

We propose a novel zero-order control barrier function (ZOCBF) for sampled-data systems to ensure system safety. Our formulation generalizes conventional control barrier functions and straightforwardly handles safety constraints with high-relative degrees or those that explicitly depend on both system states and inputs. The proposed ZOCBF condition does not require any differentiation operation. Instead, it involves computing the difference of the ZOCBF values at two consecutive sampling instants. We propose three numerical approaches to enforce the ZOCBF condition, tailored to different problem settings and available computational resources. We demonstrate the effectiveness of our approach through a collision avoidance example and a rollover prevention example on uneven terrains.

arXiv:2411.18009공식 코드 · Papers with Code

Monocular Obstacle Avoidance Based on Inverse PPO for Fixed-wing UAVs

Fixed-wing Unmanned Aerial Vehicles (UAVs) are one of the most commonly used platforms for the burgeoning Low-altitude Economy (LAE) and Urban Air Mobility (UAM), due to their long endurance and high-speed capabilities. Classical obstacle avoidance systems, which rely on prior maps or sophisticated sensors, face limitations in unknown low-altitude environments and small UAV platforms. In response, this paper proposes a lightweight deep reinforcement learning (DRL) based UAV collision avoidance system that enables a fixed-wing UAV to avoid unknown obstacles at cruise speed over 30m/s, with only onboard visual sensors. The proposed system employs a single-frame image depth inference module with a streamlined network architecture to ensure real-time obstacle detection, optimized for edge computing devices. After that, a reinforcement learning controller with a novel reward function is designed to balance the target approach and flight trajectory smoothness, satisfying the specific dynamic constraints and stability requirements of a fixed-wing UAV platform. An adaptive entropy adjustment mechanism is introduced to mitigate the exploration-exploitation trade-off inherent in DRL, improving training convergence and obstacle avoidance success rates. Extensive software-in-the-loop and hardware-in-the-loop experiments demonstrate that the proposed framework outperforms other methods in obstacle avoidance efficiency and flight trajectory smoothness and confirm the feasibility of implementing the algorithm on edge devices. The source code is publicly available at \url{https://github.com/ch9397/FixedWing-MonoPPO}.

arXiv:2411.10096

Neural Port-Hamiltonian Models for Nonlinear Distributed Control: An Unconstrained Parametrization Approach

The control of large-scale cyber-physical systems requires optimal distributed policies relying solely on limited communication with neighboring agents. However, computing stabilizing controllers for nonlinear systems while optimizing complex costs remains a significant challenge. Neural Networks (NNs), known for their expressivity, can be leveraged to parametrize control policies that yield good performance. However, NNs' sensitivity to small input changes poses a risk of destabilizing the closed-loop system. Many existing approaches enforce constraints on the controllers' parameter space to guarantee closed-loop stability, leading to computationally expensive optimization procedures. To address these problems, we leverage the framework of port-Hamiltonian systems to design continuous-time distributed control policies for nonlinear systems that guarantee closed-loop stability and finite $\mathcal{L}_2$ or incremental $\mathcal{L}_2$ gains, independent of the optimzation parameters of the controllers. This eliminates the need to constrain parameters during optimization, allowing the use of standard techniques such as gradient-based methods. Additionally, we discuss discretization schemes that preserve the dissipation properties of these controllers for implementation on embedded systems. The effectiveness of the proposed distributed controllers is demonstrated through consensus control of non-holonomic mobile robots subject to collision avoidance and averaged voltage regulation with weighted power sharing in DC microgrids.

arXiv:2411.08190

Collision-Free Multi-Agent Coverage Control for Non-Cooperating Swarms: Preliminary Results

The main contribution of this paper is a methodology for multiple non-cooperating swarms of unmanned aerial vehicles to independently cover a common area. In contrast to previous research on coverage control involving more than one swarm, this paper does not assume cooperation between distinct groups but considers them as entirely independent units following their own objectives. Using Voronoi tesselation, collision-free motion of agents within the same swarm has been proved before. However, as is shown in Example 1 of this paper, in the case of multiple swarms with inter-swarm but without intra-swarm collaboration, these guarantees do not hold. We address this issue by proposing an algorithm to achieve maximum coverage with multiple swarms while avoiding collisions between agents. Thus, the Optimal Reciprocal Collision Avoidance method used for safe navigation in multi-agent scenarios is adapted to suit the needs of Voronoi-based coverage control with more than one swarm. The functionality of the proposed technique is validated through Monte Carlo simulations.

arXiv:2411.07534

Effective Virtual Reality Teleoperation of an Upper-body Humanoid with Modified Task Jacobians and Relaxed Barrier Functions for Self-Collision Avoidance

We present an approach for retartgeting off-the-shelf Virtual Reality (VR) trackers to effectively teleoperate an upper-body humanoid while ensuring self-collision-free motions. Key to the effectiveness was the proper assignment of trackers to joint sets via modified task Jacobians and relaxed barrier functions for self-collision avoidance. The approach was validated on Apptronik's Astro hardware by demonstrating manipulation capabilities on a table-top environment with pick-and-place box packing and a two-handed box pick up and handover task.

arXiv:2411.03465

Digital Twin for Autonomous Surface Vessels: Enabler for Safe Maritime Navigation

Autonomous surface vessels (ASVs) are becoming increasingly significant in enhancing the safety and sustainability of maritime operations. To ensure the reliability of modern control algorithms utilized in these vessels, digital twins (DTs) provide a robust framework for conducting safe and effective simulations within a virtual environment. Digital twins are generally classified on a scale from 0 to 5, with each level representing a progression in complexity and functionality: Level 0 (Standalone) employs offline modeling techniques; Level 1 (Descriptive) integrates sensors and online modeling to enhance situational awareness; Level 2 (Diagnostic) focuses on condition monitoring and cybersecurity; Level 3 (Predictive) incorporates predictive analytics; Level 4 (Prescriptive) embeds decision-support systems; and Level 5 (Autonomous) enables advanced functionalities such as collision avoidance and path following. These digital representations not only provide insights into the vessel's current state and operational efficiency but also predict future scenarios and assess life endurance. By continuously updating with real-time sensor data, the digital twin effectively corrects modeling errors and enhances decision-making processes. Since DTs are key enablers for complex autonomous systems, this paper introduces a comprehensive methodology for establishing a digital twin framework specifically tailored for ASVs. Through a detailed literature survey, we explore existing state-of-the-art enablers across the defined levels, offering valuable recommendations for future research and development in this rapidly evolving field.

arXiv:2411.01628

Energy-Aware FPGA Implementation of Spiking Neural Network with LIF Neurons

Tiny Machine Learning (TinyML) has become a growing field in on-device processing for Internet of Things (IoT) applications, capitalizing on AI algorithms that are optimized for their low complexity and energy efficiency. These algorithms are designed to minimize power and memory footprints, making them ideal for the constraints of IoT devices. Within this domain, Spiking Neural Networks (SNNs) stand out as a cutting-edge solution for TinyML, owning to their event-driven processing paradigm which offers an efficient method of handling dataflow. This paper presents a novel SNN architecture based on the 1st Order Leaky Integrate-and-Fire (LIF) neuron model to efficiently deploy vision-based ML algorithms on TinyML systems. A hardware-friendly LIF design is also proposed, and implemented on a Xilinx Artix-7 FPGA. To evaluate the proposed model, a collision avoidance dataset is considered as a case study. The proposed SNN model is compared to the state-of-the-art works and Binarized Convolutional Neural Network (BCNN) as a baseline. The results show the proposed approach is 86% more energy efficient than the baseline.

arXiv:2411.01963

V-CAS: A Realtime Vehicle Anti Collision System Using Vision Transformer on Multi-Camera Streams

This paper introduces a real-time Vehicle Collision Avoidance System (V-CAS) designed to enhance vehicle safety through adaptive braking based on environmental perception. V-CAS leverages the advanced vision-based transformer model RT-DETR, DeepSORT tracking, speed estimation, brake light detection, and an adaptive braking mechanism. It computes a composite collision risk score based on vehicles' relative accelerations, distances, and detected braking actions, using brake light signals and trajectory data from multiple camera streams to improve scene perception. Implemented on the Jetson Orin Nano, V-CAS enables real-time collision risk assessment and proactive mitigation through adaptive braking. A comprehensive training process was conducted on various datasets for comparative analysis, followed by fine-tuning the selected object detection model using transfer learning. The system's effectiveness was rigorously evaluated on the Car Crash Dataset (CCD) from YouTube and through real-time experiments, achieving over 98% accuracy with an average proactive alert time of 1.13 seconds. Results indicate significant improvements in object detection and tracking, enhancing collision avoidance compared to traditional single-camera methods. This research demonstrates the potential of low-cost, multi-camera embedded vision transformer systems to advance automotive safety through enhanced environmental perception and proactive collision avoidance mechanisms.

arXiv:2410.19159

Collision Avoidance for Convex Primitives via Differentiable Optimization Based High-Order Control Barrier Functions

Ensuring the safety of dynamical systems is crucial, where collision avoidance is a primary concern. Recently, control barrier functions (CBFs) have emerged as an effective method to integrate safety constraints into control synthesis through optimization techniques. However, challenges persist when dealing with convex primitives and tasks requiring torque control, as well as the occurrence of unintended equilibria. This work addresses these challenges by introducing a high-order CBF (HOCBF) framework for collision avoidance among convex primitives. We transform nonconvex safety constraints into linear constraints by differentiable optimization and prove the high-order continuous differentiability. Then, we employ HOCBFs to accommodate torque control, enabling tasks involving forces or high dynamics. Additionally, we analyze the issue of spurious equilibria in high-order cases and propose a circulation mechanism to prevent the undesired equilibria on the boundary of the safe set. Finally, we validate our framework with three experiments on the Franka Research 3 robotic manipulator, demonstrating successful collision avoidance and the efficacy of the circulation mechanism.

arXiv:2410.19336

DECADE: Towards Designing Efficient-yet-Accurate Distance Estimation Modules for Collision Avoidance in Mobile Advanced Driver Assistance Systems

The proliferation of smartphones and other mobile devices provides a unique opportunity to make Advanced Driver Assistance Systems (ADAS) accessible to everyone in the form of an application empowered by low-cost Machine/Deep Learning (ML/DL) models to enhance road safety. For the critical feature of Collision Avoidance in Mobile ADAS, lightweight Deep Neural Networks (DNN) for object detection exist, but conventional pixel-wise depth/distance estimation DNNs are vastly more computationally expensive making them unsuitable for a real-time application on resource-constrained devices. In this paper, we present a distance estimation model, DECADE, that processes each detector output instead of constructing pixel-wise depth/disparity maps. In it, we propose a pose estimation DNN to estimate allocentric orientation of detections to supplement the distance estimation DNN in its prediction of distance using bounding box features. We demonstrate that these modules can be attached to any detector to extend object detection with fast distance estimation. Evaluation of the proposed modules with attachment to and fine-tuning on the outputs of the YOLO object detector on the KITTI 3D Object Detection dataset achieves state-of-the-art performance with 1.38 meters in Mean Absolute Error and 7.3% in Mean Relative Error in the distance range of 0-150 meters. Our extensive evaluation scheme not only evaluates class-wise performance, but also evaluates range-wise accuracy especially in the critical range of 0-70m.

arXiv:2410.17576공식 코드 · Papers with Code

Real-time Vehicle-to-Vehicle Communication Based Network Cooperative Control System through Distributed Database and Multimodal Perception: Demonstrated in Crossroads

The autonomous driving industry is rapidly advancing, with Vehicle-to-Vehicle (V2V) communication systems highlighting as a key component of enhanced road safety and traffic efficiency. This paper introduces a novel Real-time Vehicle-to-Vehicle Communication Based Network Cooperative Control System (VVCCS), designed to revolutionize macro-scope traffic planning and collision avoidance in autonomous driving. Implemented on Quanser Car (Qcar) hardware platform, our system integrates the distributed databases into individual autonomous vehicles and an optional central server. We also developed a comprehensive multi-modal perception system with multi-objective tracking and radar sensing. Through a demonstration within a physical crossroad environment, our system showcases its potential to be applied in congested and complex urban environments.

arXiv:2410.13973

MarineFormer: A Spatio-Temporal Attention Model for USV Navigation in Dynamic Marine Environments

Navigating autonomously in marine environments including dynamic and static obstacles, and strong flow disturbances, such as in high-flow rivers, poses significant challenges for USVs. To address these challenges, we propose a novel methodology that leverages two types of attention: spatial attention, which learns to integrate diverse environmental factors and sensory information into navigation decisions, and temporal attention within a transformer framework to account for the dynamic, continuously changing nature of the environment. We devise MarineFormer, a Trans${\bf \text{former}}$-based navigation policy for dynamic ${\bf \text{Marine}}$ environments, trained end-to-end through reinforcement learning (RL). At its core, MarineFormer uses graph attention to capture spatial information and a transformer architecture to process temporal sequences in an environment that simulates a 2D turbulent marine condition involving multiple static and dynamic obstacles. We extensively evaluate the performance of the proposed method versus the state-of-the-art methods, as well as other classical planners. Our approach outperforms the state-of-the-art by nearly $20\%$ in episode completion success rate and additionally enhances the USV's path length efficiency.

arXiv:2410.12232

Improving the Generalization of Unseen Crowd Behaviors for Reinforcement Learning based Local Motion Planners

Deploying a safe mobile robot policy in scenarios with human pedestrians is challenging due to their unpredictable movements. Current Reinforcement Learning-based motion planners rely on a single policy to simulate pedestrian movements and could suffer from the over-fitting issue. Alternatively, framing the collision avoidance problem as a multi-agent framework, where agents generate dynamic movements while learning to reach their goals, can lead to conflicts with human pedestrians due to their homogeneity. To tackle this problem, we introduce an efficient method that enhances agent diversity within a single policy by maximizing an information-theoretic objective. This diversity enriches each agent's experiences, improving its adaptability to unseen crowd behaviors. In assessing an agent's robustness against unseen crowds, we propose diverse scenarios inspired by pedestrian crowd behaviors. Our behavior-conditioned policies outperform existing works in these challenging scenes, reducing potential collisions without additional time or travel.

arXiv:2410.11282

Multi-Objective-Optimization Multi-AUV Assisted Data Collection Framework for IoUT Based on Offline Reinforcement Learning

The Internet of Underwater Things (IoUT) offers significant potential for ocean exploration but encounters challenges due to dynamic underwater environments and severe signal attenuation. Current methods relying on Autonomous Underwater Vehicles (AUVs) based on online reinforcement learning (RL) lead to high computational costs and low data utilization. To address these issues and the constraints of turbulent ocean environments, we propose a multi-AUV assisted data collection framework for IoUT based on multi-agent offline RL. This framework maximizes data rate and the value of information (VoI), minimizes energy consumption, and ensures collision avoidance by utilizing environmental and equipment status data. We introduce a semi-communication decentralized training with decentralized execution (SC-DTDE) paradigm and a multi-agent independent conservative Q-learning algorithm (MAICQL) to effectively tackle the problem. Extensive simulations demonstrate the high applicability, robustness, and data collection efficiency of the proposed framework.