LIDAR is one of the most important sensors for Unmanned Ground Vehicles (UGV). Object detection and classification based on lidar point cloud is a key technology for UGV. In object detection and classification, the mutual occlusion between neighboring objects is an important factor affecting the accuracy. In this paper, we consider occlusion as an intrinsic property of the point cloud data. We propose a novel approach that explicitly model the occlusion. The occlusion property is then taken into account in the subsequent classification step. We perform experiments on the KITTI dataset. Experimental results indicate that by utilizing the occlusion property that we modeled, the classifier obtains much better performance.
In this paper, we make freely accessible ANETAC our English-Arabic named entity transliteration and classification dataset that we built from freely available parallel translation corpora. The dataset contains 79,924 instances, each instance is a triplet (e, a, c), where e is the English named entity, a is its Arabic transliteration and c is its class that can be either a Person, a Location, or an Organization. The ANETAC dataset is mainly aimed for the researchers that are working on Arabic named entity transliteration, but it can also be used for named entity classification purposes.
False Data Injection (FDI) attacks are a common form of Cyber-attack targetting smart grids. Detection of stealthy FDI attacks is impossible by the current bad data detection systems. Machine learning is one of the alternative methods proposed to detect FDI attacks. This paper analyzes three various supervised learning techniques, each to be used with three different feature selection (FS) techniques. These methods are tested on the IEEE 14-bus, 57-bus, and 118-bus systems for evaluation of versatility. Accuracy of the classification is used as the main evaluation method for each detection technique. Simulation study clarify the supervised learning combined with heuristic FS methods result in an improved performance of the classification algorithms for FDI attack detection.
The use of machine learning and intelligent systems has become an established practice in the realm of malware detection and cyber threat prevention. In an environment characterized by widespread accessibility and big data, the feasibility of malware classification without the use of artificial intelligence-based techniques has been diminished exponentially. Also characteristic of the contemporary realm of automated, intelligent malware detection is the threat of adversarial machine learning. Adversaries are looking to target the underlying data and/or algorithm responsible for the functionality of malware classification to map its behavior or corrupt its functionality. The ends of such adversaries are bypassing the cyber security measures and increasing malware effectiveness. The focus of this research is the design of an intelligent systems approach using machine learning that can accurately and robustly classify malware under adversarial conditions. Such an outcome ultimately relies on increased flexibility and adaptability to build a model robust enough to identify attacks on the underlying algorithm.
The goal of few-shot learning is to recognize new visual concepts with just a few amount of labeled samples in each class. Recent effective metric-based few-shot approaches employ neural networks to learn a feature similarity comparison between query and support examples. However, the importance of feature embedding, i.e., exploring the relationship among training samples, is neglected. In this work, we present a simple yet powerful baseline for few-shot classification by emphasizing the importance of feature embedding. Specifically, we revisit the classical triplet network from deep metric learning, and extend it into a deep K-tuplet network for few-shot learning, utilizing the relationship among the input samples to learn a general representation learning via episode-training. Once trained, our network is able to extract discriminative features for unseen novel categories and can be seamlessly incorporated with a non-linear distance metric function to facilitate the few-shot classification. Our result on the miniImageNet benchmark outperforms other metric-based few-shot classification methods. More importantly, when evaluated on completely different datasets (Caltech-101, CUB-200, Stanford Dogs and Cars) using the model trained with miniImageNet, our method significantly outperforms prior methods, demonstrating its superior capability to generalize to unseen classes.
Today, large amounts of valuable data are distributed among millions of user-held devices, such as personal computers, phones, or Internet-of-things devices. Many companies collect such data with the goal of using it for training machine learning models allowing them to improve their services. User-held data is, however, often sensitive, and collecting it is problematic in terms of privacy. We address this issue by proposing a novel way of training a supervised classifier in a distributed setting akin to the recently proposed federated learning paradigm, but under the stricter privacy requirement that the server that trains the model is assumed to be untrusted and potentially malicious. We thus preserve user privacy by design, rather than by trust. In particular, our framework, called secret vector machine (SecVM), provides an algorithm for training linear support vector machines (SVM) in a setting in which data-holding clients communicate with an untrusted server by exchanging messages designed to not reveal any personally identifiable information. We evaluate our model in two ways. First, in an offline evaluation, we train SecVM to predict user gender from tweets, showing that we can preserve user privacy without sacrificing classification performance. Second, we implement SecVM's distributed framework for the Cliqz web browser and deploy it for predicting user gender in a large-scale online evaluation with thousands of clients, outperforming baselines by a large margin and thus showcasing that SecVM is suitable for production environments.
Audio-based music classification and tagging is typically based on categorical supervised learning with a fixed set of labels. This intrinsically cannot handle unseen labels such as newly added music genres or semantic words that users arbitrarily choose for music retrieval. Zero-shot learning can address this problem by leveraging an additional semantic space of labels where side information about the labels is used to unveil the relationship between each other. In this work, we investigate the zero-shot learning in the music domain and organize two different setups of side information. One is using human-labeled attribute information based on Free Music Archive and OpenMIC-2018 datasets. The other is using general word semantic information based on Million Song Dataset and Last.fm tag annotations. Considering a music track is usually multi-labeled in music classification and tagging datasets, we also propose a data split scheme and associated evaluation settings for the multi-label zero-shot learning. Finally, we report experimental results and discuss the effectiveness and new possibilities of zero-shot learning in the music domain.
Suffering from the multi-view data diversity and complexity for semi-supervised classification, most of existing graph convolutional networks focus on the networks architecture construction or the salient graph structure preservation, and ignore the the complete graph structure for semi-supervised classification contribution. To mine the more complete distribution structure from multi-view data with the consideration of the specificity and the commonality, we propose structure fusion based on graph convolutional networks (SF-GCN) for improving the performance of semi-supervised classification. SF-GCN can not only retain the special characteristic of each view data by spectral embedding, but also capture the common style of multi-view data by distance metric between multi-graph structures. Suppose the linear relationship between multi-graph structures, we can construct the optimization function of structure fusion model by balancing the specificity loss and the commonality loss. By solving this function, we can simultaneously obtain the fusion spectral embedding from the multi-view data and the fusion structure as adjacent matrix to input graph convolutional networks for semi-supervised classification. Experiments demonstrate that the performance of SF-GCN outperforms that of the state of the arts on three challenging datasets, which are Cora,Citeseer and Pubmed in citation networks.
In this paper, we propose a new experimental protocol and use it to benchmark the data efficiency --- performance as a function of training set size --- of two deep learning algorithms, convolutional neural networks (CNNs) and hierarchical information-preserving graph-based slow feature analysis (HiGSFA), for tasks in classification and transfer learning scenarios. The algorithms are trained on different-sized subsets of the MNIST and Omniglot data sets. HiGSFA outperforms standard CNN networks when the models are trained on 50 and 200 samples per class for MNIST classification. In other cases, the CNNs perform better. The results suggest that there are cases where greedy, locally optimal bottom-up learning is equally or more powerful than global gradient-based learning.
Adversarial attacks refer to a set of methods that perturb the input to a classification model in order to fool the classifier. In this paper we apply different gradient based adversarial attack algorithms on five deep learning models trained for sound event classification. Four of the models use mel-spectrogram input and one model uses raw audio input. The models represent standard architectures such as convolutional, recurrent and dense networks. The dataset used for training is the Freesound dataset released for task 2 of the DCASE 2018 challenge and the models used are from participants of the challenge who open sourced their code. Our experiments show that adversarial attacks can be generated with high confidence and low perturbation. In addition, we show that the adversarial attacks are very effective across the different models.
An approach for computing unique gait signature using measurements collected from body-worn inertial measurement units (IMUs) is proposed. The gait signature represents one full cycle of the human gait, and is suitable for off-line or on-line classification of the gait mode. The signature can also be used to jointly classify the gait mode and the device mode. The device mode identifies how the IMU-equipped device is being carried by the user. The method is based on precise segmentation and resampling of the measured IMU signal, as an initial step, further tuned by minimizing the variability of the obtained signature within each gait cycle. Finally, a Fourier series expansion of the gait signature is introduced which provides a low-dimensional feature vector well suited for classification purposes. The proposed method is evaluated on a large dataset involving several subjects, each one containing two different gait modes and four different device modes. The gait signatures enable a high classification rate for each step cycle.
Environmental sound classification (ESC) is a challenging problem due to the complexity of sounds. The ESC performance is heavily dependent on the effectiveness of representative features extracted from the environmental sounds. However, ESC often suffers from the semantically irrelevant frames and silent frames. In order to deal with this, we employ a frame-level attention model to focus on the semantically relevant frames and salient frames. Specifically, we first propose an convolutional recurrent neural network to learn spectro-temporal features and temporal correlations. Then, we extend our convolutional RNN model with a frame-level attention mechanism to learn discriminative feature representations for ESC. Experiments were conducted on ESC-50 and ESC-10 datasets. Experimental results demonstrated the effectiveness of the proposed method and achieved the state-of-the-art performance in terms of classification accuracy.
Deep learning for medical image classification faces three major challenges: 1) the number of annotated medical images for training are usually small; 2) regions of interest (ROIs) are relatively small with unclear boundaries in the whole medical images, and may appear in arbitrary positions across the x,y (and also z in 3D images) dimensions. However often only labels of the whole images are annotated, and localized ROIs are unavailable; and 3) ROIs in medical images often appear in varying sizes (scales). We approach these three challenges with a Multi-Instance Multi-Scale (MIMS) CNN: 1) We propose a multi-scale convolutional layer, which extracts patterns of different receptive fields with a shared set of convolutional kernels, so that scale-invariant patterns are captured by this compact set of kernels. As this layer contains only a small number of parameters, training on small datasets becomes feasible; 2) We propose a "top-k pooling" to aggregate the feature maps in varying scales from multiple spatial dimensions, allowing the model to be trained using weak annotations within the multiple instance learning (MIL) framework. Our method is shown to perform well on three classification tasks involving two 3D and two 2D medical image datasets.
Preventing organizations from Cyber exploits needs timely intelligence about Cyber vulnerabilities and attacks, referred as threats. Cyber threat intelligence can be extracted from various sources including social media platforms where users publish the threat information in real time. Gathering Cyber threat intelligence from social media sites is a time consuming task for security analysts that can delay timely response to emerging Cyber threats. We propose a framework for automatically gathering Cyber threat intelligence from Twitter by using a novelty detection model. Our model learns the features of Cyber threat intelligence from the threat descriptions published in public repositories such as Common Vulnerabilities and Exposures (CVE) and classifies a new unseen tweet as either normal or anomalous to Cyber threat intelligence. We evaluate our framework using a purpose-built data set of tweets from 50 influential Cyber security related accounts over twelve months (in 2018). Our classifier achieves the F1-score of 0.643 for classifying Cyber threat tweets and outperforms several baselines including binary classification models. Our analysis of the classification results suggests that Cyber threat relevant tweets on Twitter do not often include the CVE identifier of the related threats. Hence, it would be valuable to collect these tweets and associate them with the related CVE identifier for cyber security applications.
Transposable Elements (TEs) or jumping genes are the DNA sequences that have an intrinsic capability to move within a host genome from one genomic location to another. Studies show that the presence of a TE within or adjacent to a functional gene may alter its expression. TEs can also cause an increase in the rate of mutation and can even mediate duplications and large insertions and deletions in the genome, promoting gross genetic rearrangements. Thus, the proper classification of the identified jumping genes is essential to understand their genetic and evolutionary effects in the genome. While computational methods have been developed that perform either binary classification or multi-label classification of TEs, few studies have focused on their hierarchical classification. The state-of-the-art machine learning classification method utilizes a Multi-Layer Perceptron (MLP), a class of neural network, for hierarchical classification of TEs. However, the existing methods have limited accuracy in classifying TEs. A more effective classifier, which can explain the role of TEs in germline and somatic evolution, is needed. In this study, we examine the performance of a variety of machine learning (ML) methods. And eventually, propose a robust approach for the hierarchical classification of TEs, with higher accuracy, using Support Vector Machines (SVM).
Central venous catheters (CVCs) are commonly used in critical care settings for monitoring body functions and administering medications. They are often described in radiology reports by referring to their presence, identity and placement. In this paper, we address the problem of automatic detection of their presence and identity through automated segmentation using deep learning networks and classification based on their intersection with previously learned shape priors from clinician annotations of CVCs. The results not only outperform existing methods of catheter detection achieving 85.2% accuracy at 91.6% precision, but also enable high precision (95.2%) classification of catheter types on a large dataset of over 10,000 chest X-rays, presenting a robust and practical solution to this problem.
The growing prosperity of social networks has brought great challenges to the sentimental tendency mining of users. As more and more researchers pay attention to the sentimental tendency of online users, rich research results have been obtained based on the sentiment classification of explicit texts. However, research on the implicit sentiment of users is still in its infancy. Aiming at the difficulty of implicit sentiment classification, a research on implicit sentiment classification model based on deep neural network is carried out. Classification models based on DNN, LSTM, Bi-LSTM and CNN were established to judge the tendency of the user's implicit sentiment text. Based on the Bi-LSTM model, the classification model of word-level attention mechanism is studied. The experimental results on the public dataset show that the established LSTM series classification model and CNN classification model can achieve good sentiment classification effect, and the classification effect is significantly better than the DNN model. The Bi-LSTM based attention mechanism classification model obtained the optimal R value in the positive category identification.
Symmetry is a key feature observed in nature (from flowers and leaves, to butterflies and birds) and in human-made objects (from paintings and sculptures, to manufactured objects and architectural design). Rotational, translational, and especially reflectional symmetries, are also important in drawings of graphs. Detecting and classifying symmetries can be very useful in algorithms that aim to create symmetric graph drawings and in this paper we present a machine learning approach for these tasks. Specifically, we show that deep neural networks can be used to detect reflectional symmetries with 92% accuracy. We also build a multi-class classifier to distinguish between reflectional horizontal, reflectional vertical, rotational, and translational symmetries. Finally, we make available a collection of images of graph drawings with specific symmetric features that can be used in machine learning systems for training, testing and validation purposes. Our datasets, best trained ML models, source code are available online.
The Internet is rife with flourishing rumours that spread through microblogs and social media. Recent work has shown that analysing the stance of the crowd towards a rumour is a good indicator for its veracity. One state-of-the-art system uses an LSTM neural network to automatically classify stance for posts on Twitter by considering the context of a whole branch, while another, more simple Decision Tree classifier, performs at least as well by performing careful feature engineering. One approach to predict the veracity of a rumour is to use stance as the only feature for a Hidden Markov Model (HMM). This thesis generates a stance-annotated Reddit dataset for the Danish language, and implements various models for stance classification. Out of these, a Linear Support Vector Machine provides the best results with an accuracy of 0.76 and macro F1 score of 0.42. Furthermore, experiments show that stance labels can be used across languages and platforms with a HMM to predict the veracity of rumours, achieving an accuracy of 0.82 and F1 score of 0.67. Even higher scores are achieved by relying only on the Danish dataset. In this case veracity prediction scores an accuracy of 0.83 and an F1 of 0.68. Finally, when using automatic stance labels for the HMM, only a small drop in performance is observed, showing that the implemented system can have practical applications.
Lane detection is extremely important for autonomous vehicles. For this reason, many approaches use lane boundary information to locate the vehicle inside the street, or to integrate GPS-based localization. As many other computer vision based tasks, convolutional neural networks (CNNs) represent the state-of-the-art technology to indentify lane boundaries. However, the position of the lane boundaries w.r.t. the vehicle may not suffice for a reliable positioning, as for path planning or localization information regarding lane types may also be needed. In this work, we present an end-to-end system for lane boundary identification, clustering and classification, based on two cascaded neural networks, that runs in real-time. To build the system, 14336 lane boundaries instances of the TuSimple dataset for lane detection have been labelled using 8 different classes. Our dataset and the code for inference are available online.