There are many causal discovery algorithms, but few guiding principles for choosing between them. Methods are usually compared through three lenses: identifiability, consistency, and benchmarks. Each introduces assumptions about the data-generating process that are often untestable. We argue that there are no shared standards for comparing, prioritizing, or even discussing those assumptions. We support this claim by showing that (i) identifiability assumptions are often preferred by convention rather than by principle, (ii) uniform consistency requires further untestable assumptions, while the weaker pointwise consistency has arguably narrowed algorithm design, and (iii) benchmarks are not neutral tests but carry an epistemic role of their own: they quietly fix which regimes matter, which guarantees come into play, and what counts as success. In doing so, they shape what algorithm comparisons are taken to show and thus perform some of the same epistemic work as theory, but less transparently. In this position paper we argue for a more transparent, integrated practice: Make the epistemic standards for discussing identifiability and consistency assumptions explicit, especially their failure modes and scope conditions; design benchmarks to operationalize those standards, by stress-testing and ablating both. Then, theoretical and empirical results jointly clarify when, why, and how algorithms may work rather than accumulate as disconnected advances.
LaBraM, an early EEG foundation model, demonstrated that large-scale EEG pretraining can yield strong representations for diverse downstream tasks. Building on this foundation, we expand pretraining data and model capacity while retaining its core encoder and objective. We train ten encoders with 5.8 million to 1.97 billion parameters on three EEG collections spanning 25,067 to 79,910 hours, adapting signal preparation and training to heterogeneous recordings. Across 23 tasks, Atom-L* reaches 59.05% mean balanced accuracy at its best evaluated full fine-tuning (Full-FT) checkpoint, 3.61 percentage points above the strongest baseline EEG foundation model. Quark-G leads linear probing (LP) at 54.33%, a 1.24-point margin. Both also lead average task rank. At the last evaluated checkpoints, larger encoders improve Full-FT more consistently than LP, and stronger LP does not guarantee stronger Full-FT. Preserving patch structure improves LP over average pooling. Data-fraction experiments suggest capacity-dependent saturation, while checkpoint trajectories show that downstream performance can decline as pretraining loss falls. Joint classification with a shared Qwen3 readout reaches 50.50% with Molecule-H and Qwen3-8B; increasing language-model size provides no consistent gain. These results demonstrate the value of scaling LaBraM and the importance of matching pretraining scale to downstream adaptation.
Knowledge is how understanding accumulates across people and generations: durable records that outlive their producers and that others can check, combine, teach, and correct. AI agents are now built and run by many independent users and organizations, and each agent is upgraded, replaced, or retired within months. Yet what an agent learns stays trapped in model parameters, a transient context window, or a system-specific memory store that is appended to and retrieved from rather than processed. We argue that the next generation of AI should be knowledge-centric, built around an explicit, continuously evolving knowledge layer independent of any single agent. In this loop, agents discover knowledge from their environments and trajectories; the layer internalizes it by turning fragmented, heterogeneous records and experience into composable, revisable understanding; and agents across systems and generations use the result and return new outcomes for revision. While discovery and use have advanced rapidly with large language model agents, internalization remains the bottleneck. We argue that internalization should become a persistent object of training and maintenance-centered on condition-preserving conceptualization of events and deductive, inductive, and abductive reasoning across noisy, heterogeneous representations (text, tables, graphs, rules, and programs). To power this layer, we call for knowledge foundation models that provide shared neural capacity for knowledge computation, and outline a research agenda showing how an explicit knowledge layer delivers reuse, cost efficiency, auditability, and continuity across agent generations.
Spherical transformer configurations can accelerate grokking through simultaneous modifications of several model properties. The present study investigated the contributions of these modifications in the published Sphere+Fourier configuration using 960 controlled modular-arithmetic runs. A complete factorial analysis varied residual projection, readout weight normalization, logit scale, and weight decay. Across four matched settings with weight decay, the successful-run mean crossing times without projection were 8-37 times those observed with projection. However, residual projection was insufficient to induce grokking without additional interventions. Various other unprojected configurations also generalized. Since projection altered the magnitude entering the readout, these comparisons could not separate geometry from output scale. A separate 100-run fixed-horizon study demonstrated faster first crossing for the complete configuration across five train/test partitions. Faster crossing did not necessarily correspond to greater persistence over extended training. Control experiments demonstrated rapid grokking without Fourier initialization. Task and depth sweeps also identified conditions in which the configuration failed to reach the criterion by 50K epochs. Accordingly, the observed acceleration depended on interactions among the components and did not extend uniformly across the tested tasks or depths.
Machine learning supports materials design, atomistic simulation and experimental characterization, yet models and workflows remain fragmented. We present PaddleMaterials, an open-source framework integrating heterogeneous materials-learning tasks while preserving task-specific representations and scientific semantics. It unifies data processing, training, evaluation, pretrained-model management and workflows across six task classes: property prediction, structure generation, machine-learning interatomic potentials, electronic-structure fields, spectrum elucidation and microscopy image processing. Task interfaces record physical quantities, units, aggregation conventions and references, making cross-task composition verifiable. A shared compiler backend enables switching from dynamic-graph to compiled execution through one setting, using graph optimization, operator fusion and hardware-targeted code generation without changing model definitions. Across 65 model instances in 11 groups, compiled execution accelerated every instance in eight groups, with group median speedups of 11%-224% and group maximum speedups of 11%-336%. Case studies on LiMnO2 and toluene link structure generation or spectrum elucidation, interatomic-potential relaxation, property prediction and electron-density prediction, using same-geometry density functional theory (DFT) calculations as references. For LiMnO2, predicted formation energies for generated and relaxed structures differed from same-geometry PBE+U references by at most 7 meV per atom, while the computational cost of model steps was less than one-twentieth of a DFT single-point calculation. PaddleMaterials extends unified materials workflows beyond conventional property, potential and structure-generation tasks while supporting verifiable cross-task operations and compiled execution.
This paper reviews control architectures for building heating, ventilation and air-conditioning (HVAC) systems, addressing the tension among energy demand, occupant comfort and equipment operability, and situating proportional-integral-derivative (PID) regulation within a layered control stack that also includes rule-based and model-based supervisory control and data-driven reinforcement learning (RL). It examines the thermostat-PID layer from two-position and scheduled setpoint control through proportional, PI and PID regulation and their tuning, then formulates RL for building control as a Markov decision process. Its central contribution is a taxonomy of where RL meets PID: RL as a gain tuner for an existing loop, as a direct replacement for the regulatory controller, as a hybrid with model predictive control, and as supervisory setpoint and schedule generation. Across these classes, the review establishes that the physical loop remains invariant while the intervention point changes, and that the classes differ in their requirements for actuation authority, state information, modelling, commissioning and constraint handling. It further establishes that PID is inexpensive and well codified but limited by nonlinearity, time variation, discrete mode switching, loop interaction and slow plant dynamics, while RL's admissible position must be argued rather than assumed. The paper concludes that these architectures are not competing philosophies of control but nested points of attachment on one HVAC plant, with hybrid implementations possible, and that deployment trade-offs must be assessed according to the specific control interface and scaffolding required.
Battery degradation remains a central challenge in the development and broad application of sustainable energy technologies. Accurate degradation prediction is challenging, as battery aging emerges from complex and heterogeneous interactions among cycling behavior, operating conditions, and cell chemistry. Existing machine-learning approaches typically focus on deterministic end-of-life predictions or modeling degradation curves within fixed chemistry settings, leaving probabilistic state of health (SOH) trajectory modeling across heterogeneous chemistries underexplored. We introduce FlowBatt, a use-inspired conditional generative framework that adapts flow matching with a diffusion transformer (DiT) backbone to battery degradation trajectory modeling. FlowBatt models full SOH trajectories as probabilistic degradation processes conditioned on early-cycle capacity data. To strengthen this conditioning pathway, we use explainable AI analysis to diagnose and improve the encoder that maps early-cycle capacity matrices into conditioning vectors. We evaluate FlowBatt on five public benchmark settings spanning diverse chemistries and aging conditions, comparing it with supervised and diffusion-based trajectory models as well as established baselines for remaining useful life (RUL) prediction under shared data splits. FlowBatt achieves the best trajectory-wise SOH prediction performance on all five datasets, with errors below 2.5%, and delivers competitive RUL prediction performance. By generating multiple plausible trajectories, FlowBatt provides empirical prediction intervals for battery degradation modeling. These results indicate that flow-matching-based trajectory modeling is a promising framework for probabilistic battery health prediction.
LLM post-training via reinforcement learning has shown consistent improvements in accuracy at the cost of reducing behavioral coverage - a phenomenon known as sharpening that can stall progress on difficult tasks. Repeated sampling objectives such as $\mathrm{pass@k}$ and $\mathrm{max@k}$ are known to mitigate sharpening, but the mechanism behind it remains poorly understood. Moreover, existing approaches for $\mathrm{@k}$ optimization use dedicated algorithms, and no general framework exists for adapting established policy optimization methods from $\mathrm{@}1$ to $\mathrm{@k}$. We derive the optimal policies for KL-regularized $\mathrm{pass@k}$ and $\mathrm{max@k}$ objectives in closed form. Our explicit solutions reveal that $\mathrm{@k}$ optimization naturally redistributes learning pressure based on prompt difficulty, directing it toward harder problems. Crucially, we show that standard $\mathrm{@}1$ objectives achieve these exact same optimal policies through prompt-adaptive regularization or reward transformation. Ultimately, this yields an optimizer-independent explanation for why $\mathrm{@k}$ objectives reduce sharpening on easy tasks while prioritizing success on harder ones. Building on these insights, we introduce $\mathrm{@k}$ Adaptive Pressure for Policy Optimization (KAPPO). Following a one-time reference calibration, KAPPO seamlessly adapts existing $\mathrm{@}1$ methods to $\mathrm{@k}$ via prompt-adaptive regularization or reward transformation, without otherwise altering their training procedures. Experiments with several RL methods on mathematical reasoning and code generation demonstrate that KAPPO provides direct control over sharpening. Crucially, we demonstrate that $\mathrm{@k}$ pressure can be fully realized with single completion training, matching the performance of multi-completion $\mathrm{@k}$ optimizers at a fraction of the cost.
Procedural modeling offers compact, editable, and reusable representations for architectural content, but building such models still depends heavily on manually authored grammars. We study image-based procedural building reconstruction from in-the-wild images, with the goal of recovering an executable procedural description that can be instantiated as an editable 3D building asset. Because a single image provides only partial and view-dependent evidence, we focus on recovering the dominant visible facade(s) and attach the recovered facade program to a simple mass model for building-level instantiation. Our method decomposes this task into two structured prediction stages. First, a Global Structure Layout Tree recovers facade-scale split-and-repeat organization through a fine-tuned layout model with render-guided visual-symbolic reflection. Second, a Component Parameterization schema maps representative facade tiles to structured procedural attributes for local architectural component synthesis. These two representations are then deterministically compiled into executable Computer Generated Architecture (CGA) programs, avoiding the brittleness of direct low-level program generation. Experiments show that the proposed framework handles both regular facades and challenging in-the-wild images, while maintaining high structural consistency, procedural executability, and fine-grained architectural detail. The recovered programs further enable controllable and reusable 3D building asset generation.
Scaling depth is a key route to stronger large language models, but Pre-LN architectures often suffer from depth-wise information dilution, limiting the effective use of deep layers. While cross-layer connectivity has proven effective at mitigating this problem, existing designs usually introduce additional computation or memory access. We revisit cross-layer KV sharing as an efficient form of such connectivity. Beyond cache compression, each KV reuse edge creates a direct gradient path from deep layers to source KV projections, turning KV sharing into an implicit structural regularizer for KV representation geometry. We provide a systematic analysis of this mechanism, showing that proper sharing topologies sharpen key retrieval directions while enriching the value content subspace, whereas existing adjacent or global-anchor designs do not fully exploit this effect. Motivated by this, we propose DepthGraft, a hierarchical KV-sharing architecture that reconstructs deep-layer KV from stride-aligned shallow-middle source pairs. DepthGraft distributes non-local gradient flow across source layers, while preserving prefill early completion and reducing KV cache by roughly one third. Experiments on dense and MoE models from 0.5B to 16B parameters show consistent downstream improvements under both GQA and MLA. Notably, on the 16B MoE model, DepthGraft achieves a 7.0% absolute improvement on MMLU-Pro, along with gains of 6.6% on CMMLU and 6.4% on C3. These results validate the potential of DepthGraft as a scalable design for large-scale pretraining. The project page is available at https://github.com/jianke0604/DepthGraft.
Diffusion models are evolving from general tools into personalized systems that adapt to user needs through fine-tuning and guidance. However, diffusion optimization mainly targets measurable objectives such as aesthetics, rarely examining whether they align with human intent. Human needs are multidimensional, contextual, and dynamic, whereas existing methods approximate them with fixed metrics. Because these metrics capture human needs only partially and may amplify deviations from true intent during optimization, higher scores need not yield results better matching human expectations. To understand how human needs enter and influence optimization, we systematically analyze how human intent is expressed, translated into optimizable objectives, applied to model behavior or generation, and evaluated through outputs. We further discuss trade-offs affecting human-intent alignment in personalized image generation and gaps between automated metrics and real user judgments. This human-centered synthesis reorganizes diffusion optimization and provides a systematic reference for personalized generation systems designed for human preferences.
Fingerspelling - the sequential signing of letters that compose proper names, technical terms, and out-of-vocabulary words - is an integral component of any sign language. Despite Russian Sign Language (RSL) being used by more than 150,000 native signers, no public fingerspelling dataset for RSL exists, in contrast to American, British, German, and several other sign languages. We introduce Znaki the first open RSL fingerspelling dataset: 37,252 video recordings (35.4 hours) of 1,593 unique sequences - proper names sampled from 16 domain categories - recorded by 68 native RSL signers (37 Deaf, 29 hard-of-hearing, and 2 certified interpreters) through a crowdsourcing pipeline with a two-stage signer qualification procedure and expert validation. The dataset covers all 33 Cyrillic handshapes, and its letter-frequency distribution matches the Russian National Corpus. As reference points for future research, we establish two baselines adapted from American Sign Language fingerspelling recognition: a Squeezeformer-based encoder-decoder, reaching a character-level accuracy ($1-\mathrm{CER}$) of 0.932 and a sequence accuracy of 0.596, and Fingerspelling-PoseNet, reaching 0.886 and 0.545, respectively.
On-policy distillation (OPD) mitigates the student's exposure bias by optimizing on student-generated trajectories. However, student-generated prefixes may contain reasoning errors or follow patterns unfamiliar to the teacher, undermining the reliability of its token-level supervision. This degradation becomes more pronounced as prefixes grow longer. To address this teacher-side distribution mismatch, we propose Student-Prefix Teacher Adaptation (SPTA), which adapts the teacher to the states on which it is queried during distillation. Specifically, before OPD starts, we collect student rollout prefixes with random lengths and continually train the teacher to continue from the prefixes using reinforcement learning with verifiable rewards (RLVR). By treating each prefix as context and rewarding correct final answers, the teacher learns to recover from student-induced states rather than imitate the student's reasoning. Then, the adapted teacher is used for standard OPD, with no changes to the distillation objective. Experiments on mathematical reasoning benchmarks show that our SPTA improves average student performance over standard OPD and OPD with task-level RLVR-adapted teachers. These results highlight the importance of adapting teachers not only to solve problems independently, but also to provide reliable guidance on the states their students actually visit.
An image that is hard to classify on its own may have a helpful neighbor in the same unlabeled batch. Zero-shot vision-language models (VLMs) score images independently and leave this evidence unused. We study small unlabeled query batches with no labeled examples. Visual similarity can reflect pose or background, so it may connect images from different classes. Each image's scores over the class vocabulary offer another way to choose neighbors. We introduce Behavioral Affinity Transduction (BAT), which builds a sparse graph from these class-response profiles. The graph supplies neighbor evidence during prediction. For EM-Dirichlet, it also screens candidate classes and initializes assignments. BAT plugs into direct and iterative readouts of a frozen VLM. Across diverse datasets, BAT improves the mean accuracy of every tested readout. In the main RN50 comparison, soft and hard EM-Dirichlet gain $4.22$ and $2.72$ percentage points.
Despite recent advances in CUAs, their development remains constrained by the limited diversity, controllability, and reliability of interaction data. Moreover, conventional optimization pipelines lack iterative feedback, while existing recursive improvement approaches often rely on self-generated experiences, limiting ability expansion and yielding diminishing returns. To address these challenges, we introduce CUA-Master, a nested double-loop recursive improvement framework. At the system level, an outer world-data-model flywheel continuously incorporates open-world corpus and leverages evolving model weaknesses to guide subsequent data construction and optimization iterations. At the data level, an inner flywheel couples open-world seeding and autocatalytic propagation. The former mines authentic workflows as seed tasks from instructional videos, and employs visual-semantic dual-path trajectory reconstruction; The latter transforms these seeds into reusable primitives for controllable synthesis of diverse, complex, and verifiable tasks. To enable efficient and reliable trajectory collection, we further introduce a feedback-guided snapshot-rollback retry mechanism in various real environments. Extensive experiments demonstrate that CUA-Master-27B achieves competitive performance across GUI-only and GUI-CLI hybrid benchmarks, scoring 80.2 on OSWorld Verified, 36.9 on OSWorld 2.0, 43.9 on WeaveBench, and 25.0 on Agents' Last Exam. Our framework also substantially improves the quality and efficiency of data synthesis, and exhibits continuous gains across recursive iterations.
Multimodal large language models (MLLMs) have shown strong potential in robotic surgery for question answering, scene understanding, and grounded assistance, but their high computational cost limits real clinical deployment. Knowledge distillation provides a practical way to build compact surgical MLLMs, yet direct distillation is not well suited to surgical data because surgical samples vary greatly in difficulty, visual ambiguity, and required clinical context, making uniform teacher-student transfer unstable. In addition, the role of supervision changes during training: early stages require stronger teacher guidance for multimodal alignment, while later stages rely more on task supervision for effective optimization. To address these challenges, we propose SurgPace, a complexity-aware continuous curriculum framework for progressive distillation of surgical vision-language models. SurgPace estimates sample complexity using predictive confidence and Lorentz geometric consistency, and uses the fused score to guide a continuous easy-to-hard training process. We further introduce hierarchical representation alignment, which aligns the student with the teacher at the feature, logit, and probability levels, while gradually shifting the training focus from teacher imitation to task supervision. This design separates sample-level curriculum from objective-level scheduling, leading to more stable and effective distillation. We evaluate SurgPace on Surg-396K, a benchmark built from four public surgical datasets and covering five dialogue paradigms. SurgPace consistently outperforms strong MLLM distillation baselines, demonstrating its effectiveness for building compact, memory-efficient surgical MLLMs with faster decoding under controlled benchmarks. Code is available at https://github.com/hezhicheng2002/SurgPace.
Assessing regulatory compliance for high-risk AI systems requires systematic identification of technical gaps such as missing controls, in- adequate processes, or shallow evaluation of practices. Compliance officers typically admin- ister structured questionnaires collecting evi- dence of current practices, where organizations respond with descriptions of their existing pro- cesses, technical capabilities, and architectural choices. However, translating these compli- ance questionnaire responses into typed, ac- tionable gap diagnoses remains unsystematic. In this paper, we present a literature-grounded taxonomy of technical compliance gaps cover- ing areas such as accuracy, robustness, logging, and human oversight, and embed it in GapTo- Compliance, a two-stage agentic framework coordinating two specialized agents: a Gap Extraction Agent that performs hierarchical rea- soning from compliance areas to specific gap types, and a Remediation Planning Agent that ranks remediation actions from a remediation catalog via multi-signal scoring combining se- mantic similarity, regulatory alignment, and effort estimation. We evaluate this framework against four automatic compliance gap detec- tion baselines across 9 AI systems and 6 AI families. Our approach achieves a gap-type F1 of 0.831 (vs. 0.533 for the strongest baseline) and remediation P@5 of 0.872 (vs. 0.635 for retrieval methods), demonstrating promising potential for automated compliance workflows. The structured agent coordination reveals a path toward human-in-the-loop compliance systems where automated gap extraction reduces expert burden while maintaining auditability, and the taxonomy-driven design enables extension to emerging regulatory frameworks beyond
Accurate mapping of shallow-water environments using unmanned aerial vehicle (UAV) imagery is challenged by water-induced distortions, including refraction, caustics, and wavelength-dependent attenuation. The scarcity of paired distorted and reference imagery further limits the development of supervised restoration methods. To address this challenge, we introduce KAUSTics, a semi-synthetic dataset combining 1,280 reference patches derived from 32 high-resolution UAV images with 12,800 degraded observations generated through Blender-based water-surface rendering and empirical color and blur augmentations. We further propose KAUSTics-Net, a pixel-space conditional diffusion framework integrating a multi-scale conditional encoder, feature-wise linear modulation (FiLM), cross-attention, and a composite reconstruction objective to restore shallow-water imagery. We evaluated the framework against eight image-restoration methods, complemented by architectural ablations and cross-dataset experiments. On KAUSTics, KAUSTics-Net achieved a mean peak signal-to-noise ratio (PSNR) of 31.715 +/- 0.439 dB, structural similarity index (SSIM) of 0.849 +/- 0.002, and learned perceptual image patch similarity (LPIPS) of 0.145 +/- 0.007 across three training seeds. On the independent Sea-Undistort dataset, sampler-aware fine-tuning improved restoration fidelity, reaching 19.469 +/- 0.332 dB PSNR and 0.554 +/- 0.005 SSIM under combined water-surface distortions, although perceptual trade-offs remained. Additional experiments on real UAV imagery examined feature preservation and segmentation behavior. These findings demonstrate the potential of semi-synthetic training and conditional diffusion for shallow-water image restoration while highlighting the importance of evaluating both reconstruction fidelity and downstream remote-sensing utility.
Large language models (LLMs) are driving autonomous agents toward real-world environments, with the Web emerging as one of the most representative interaction scenarios. However, training Web agents with naive exploration remains challenging: successful trajectories are rare, and the sparse terminal rewards make it difficult for agents to obtain useful feedback from failed trajectories. Inspired by skill acquisition theory, we propose Skill-Composed Progressive Exploration (SCOPE), a short-to-long learning framework for long-horizon Web agents that decomposes complex task exploration into a gradual expansion process from local skills to complete task-solving capability. Specifically, SCOPE iteratively explores around local skills: Skill Discovery extracts reusable local skills and failure experiences from historical rollouts; Skill Orchestration composes discovered skills into high-level skill chains; and Skill Expansion leverages failure experiences aligned with the current skill chain to guide the agent toward exploring new subskills. Through this process, SCOPE progressively constructs task-completing skill chains across rollouts and internalizes them into the policy parameters through agentic on-policy distillation. Extensive experiments on WebArena, WebVoyager, and WebShop show that SCOPE consistently improves exploration dynamics and achieves 3.9% to 18.6% relative gains over the strongest baselines in each setting.
Accurate preoperative prediction of lung adenocarcinoma invasiveness is important for surgical planning and individualized treatment. However, overlapping CT appearances make it challenging to distinguish invasive adenocarcinoma (IAD) from Pre-IAD lesions. We propose a multimodal prompt-learning framework with dual-granularity image-text alignment for 3D CT-based IAD classification. A 3D ResNet-CBAM encoder extracts global and spatial visual features. A frozen RadBERT backbone is adapted with separate learnable prompts for report-level and keyword-level text encoding. These prompts are initialized using semantic representations derived from real-world clinical reports. Global contrastive alignment connects whole-volume CT representations with reports generated from clinician-annotated radiological attributes to provide overall semantic supervision. A multiple instance learning-based local alignment module associates spatial CT features with vascular-focused radiological keywords, to capture local imaging characteristics potentially associated with tumor invasion. The framework jointly optimizes classification and alignment objectives, while inference requires only CT images. Experiments included 1,593 pathologically confirmed nodules. On the test set, the proposed method achieved an accuracy of 87.92%, F1-score of 87.78%, and AUC of 0.9499. Its AUC significantly exceeded that of the image-only Res-CBAM baseline with the same visual backbone (0.9297; DeLong test, p = 0.0078). Ablation analyses supported the complementary contributions of global and local alignment and the benefit of report-based prompt initialization. Qualitative visualizations showed activation within nodules and adjacent vascular structures. These findings suggest that dual-granularity radiological supervision can enhance CT-based invasiveness prediction while preserving a CT-only inference workflow.