PyTorchKR Papers

“Object Detection”

총 13,455편
태그·기간 등 상세 필터

카테고리 탐색

arXiv:2404.01988공식 코드 · Papers with Code

Cooperative Students: Navigating Unsupervised Domain Adaptation in Nighttime Object Detection

Unsupervised Domain Adaptation (UDA) has shown significant advancements in object detection under well-lit conditions; however, its performance degrades notably in low-visibility scenarios, especially at night, posing challenges not only for its adaptability in low signal-to-noise ratio (SNR) conditions but also for the reliability and efficiency of automated vehicles. To address this problem, we propose a \textbf{Co}operative \textbf{S}tudents (\textbf{CoS}) framework that innovatively employs global-local transformations (GLT) and a proxy-based target consistency (PTC) mechanism to capture the spatial consistency in day- and night-time scenarios effectively, and thus bridge the significant domain shift across contexts. Building upon this, we further devise an adaptive IoU-informed thresholding (AIT) module to gradually avoid overlooking potential true positives and enrich the latent information in the target domain. Comprehensive experiments show that CoS essentially enhanced UDA performance in low-visibility conditions and surpasses current state-of-the-art techniques, achieving an increase in mAP of 3.0\%, 1.9\%, and 2.5\% on BDD100K, SHIFT, and ACDC datasets, respectively. Code is available at https://github.com/jichengyuan/Cooperitive_Students.

arXiv:2406.00714

A Survey of Deep Learning Based Radar and Vision Fusion for 3D Object Detection in Autonomous Driving

With the rapid advancement of autonomous driving technology, there is a growing need for enhanced safety and efficiency in the automatic environmental perception of vehicles during their operation. In modern vehicle setups, cameras and mmWave radar (radar), being the most extensively employed sensors, demonstrate complementary characteristics, inherently rendering them conducive to fusion and facilitating the achievement of both robust performance and cost-effectiveness. This paper focuses on a comprehensive survey of radar-vision (RV) fusion based on deep learning methods for 3D object detection in autonomous driving. We offer a comprehensive overview of each RV fusion category, specifically those employing region of interest (ROI) fusion and end-to-end fusion strategies. As the most promising fusion strategy at present, we provide a deeper classification of end-to-end fusion methods, including those 3D bounding box prediction based and BEV based approaches. Moreover, aligning with recent advancements, we delineate the latest information on 4D radar and its cutting-edge applications in autonomous vehicles (AVs). Finally, we present the possible future trends of RV fusion and summarize this paper.

arXiv:2610.39408v1cs.CV

YOLOF-MLD: 효율적인 객체 검출을 위한 다단계 증류 프레임워크

YOLOF-MLD: A Multi-Level Distillation Framework for Efficient Object Detection

자원이 제한된 엣지 장치에서의 효율적인 객체 검출은 화재-연기 모니터링과 같은 안전 필수 응용에 중요하다. 그러나 YOLO26과 같은 현재의 경량 프레임워크는 여전히 파라미터 밀도가 높은 다중 분기 특징 피라미드 네트워크(FPN)에 의존하여 경량의 이점을 충분히 활용하지 못한다. FPN을 YOLOF의 단일 입력 단일 출력(SiSo) 넥으로 대체하는 것은 유망한 해결책이지만 상당한 정확도 손실을 초래한다. 이를 완화하기 위해, YOLO26n 백본, SiSo 넥, 다단계 증류(MLD)를 결합한 CPU 효율적 다단계 증류 프레임워크 YOLOF-MLD를 제안한다. 이 프레임워크는 백본에서는 슬라이스 의미 매칭을, 넥에서는 수용 영역 매칭을, 그리고 응답 수준에서 특징을 정렬한다. D-Fire와 Annotated Fire-Smoke(AFS) 데이터셋에서 YOLOF-MLD는 YOLO26n의 파라미터 수를 35.7\% 줄이고 Raspberry Pi 5에서 62.3\%의 속도 향상을 달성하며, YOLO26n의 75.5% 및 60.0%에 비해 각각 71.6%와 59.9%의 mAP@50을 얻는다. 이러한 결과는 엣지 배포를 위한 경쟁력 있는 정확도-지연 시간 절충을 보여준다. 코드는 https://github.com/XiaolongWU111/YOLOF---MLD/blob/main/README.md 에서 이용할 수 있다.

arXiv:1306.1467

Highly Scalable, Parallel and Distributed AdaBoost Algorithm using Light Weight Threads and Web Services on a Network of Multi-Core Machines

AdaBoost is an important algorithm in machine learning and is being widely used in object detection. AdaBoost works by iteratively selecting the best amongst weak classifiers, and then combines several weak classifiers to obtain a strong classifier. Even though AdaBoost has proven to be very effective, its learning execution time can be quite large depending upon the application e.g., in face detection, the learning time can be several days. Due to its increasing use in computer vision applications, the learning time needs to be drastically reduced so that an adaptive near real time object detection system can be incorporated. In this paper, we develop a hybrid parallel and distributed AdaBoost algorithm that exploits the multiple cores in a CPU via light weight threads, and also uses multiple machines via a web service software architecture to achieve high scalability. We present a novel hierarchical web services based distributed architecture and achieve nearly linear speedup up to the number of processors available to us. In comparison with the previously published work, which used a single level master-slave parallel and distributed implementation [1] and only achieved a speedup of 2.66 on four nodes, we achieve a speedup of 95.1 on 31 workstations each having a quad-core processor, resulting in a learning time of only 4.8 seconds per feature.

arXiv:2304.07705

Handling Heavy Occlusion in Dense Crowd Tracking by Focusing on the Heads

With the rapid development of deep learning, object detection and tracking play a vital role in today's society. Being able to identify and track all the pedestrians in the dense crowd scene with computer vision approaches is a typical challenge in this field, also known as the Multiple Object Tracking (MOT) challenge. Modern trackers are required to operate on more and more complicated scenes. According to the MOT20 challenge result, the pedestrian is 4 times denser than the MOT17 challenge. Hence, improving the ability to detect and track in extremely crowded scenes is the aim of this work. In light of the occlusion issue with the human body, the heads are usually easier to identify. In this work, we have designed a joint head and body detector in an anchor-free style to boost the detection recall and precision performance of pedestrians in both small and medium sizes. Innovatively, our model does not require information on the statistical head-body ratio for common pedestrians detection for training. Instead, the proposed model learns the ratio dynamically. To verify the effectiveness of the proposed model, we evaluate the model with extensive experiments on different datasets, including MOT20, Crowdhuman, and HT21 datasets. As a result, our proposed method significantly improves both the recall and precision rate on small & medium sized pedestrians and achieves state-of-the-art results in these challenging datasets.

arXiv:2409.11018

Unleashing the Potential of Mamba: Boosting a LiDAR 3D Sparse Detector by Using Cross-Model Knowledge Distillation

The LiDAR-based 3D object detector that strikes a balance between accuracy and speed is crucial for achieving real-time perception in autonomous driving and robotic navigation systems. To enhance the accuracy of point cloud detection, integrating global context for visual understanding improves the point clouds ability to grasp overall spatial information. However, many existing LiDAR detection models depend on intricate feature transformation and extraction processes, leading to poor real-time performance and high resource consumption, which limits their practical effectiveness. In this work, we propose a Faster LiDAR 3D object detection framework, called FASD, which implements heterogeneous model distillation by adaptively uniform cross-model voxel features. We aim to distill the transformer's capacity for high-performance sequence modeling into Mamba models with low FLOPs, achieving a significant improvement in accuracy through knowledge transfer. Specifically, Dynamic Voxel Group and Adaptive Attention strategies are integrated into the sparse backbone, creating a robust teacher model with scale-adaptive attention for effective global visual context modeling. Following feature alignment with the Adapter, we transfer knowledge from the Transformer to the Mamba through latent space feature supervision and span-head distillation, resulting in improved performance and an efficient student model. We evaluated the framework on the Waymo and nuScenes datasets, achieving a 4x reduction in resource consumption and a 1-2\% performance improvement over the current SoTA methods.

arXiv:2502.07175

Foreign-Object Detection in High-Voltage Transmission Line Based on Improved YOLOv8m

The safe operation of high-voltage transmission lines ensures the power grid's security. Various foreign objects attached to the transmission lines, such as balloons, kites and nesting birds, can significantly affect the safe and stable operation of high-voltage transmission lines. With the advancement of computer vision technology, periodic automatic inspection of foreign objects is efficient and necessary. Existing detection methods have low accuracy because foreign objects at-tached to the transmission lines are complex, including occlusions, diverse object types, significant scale variations, and complex backgrounds. In response to the practical needs of the Yunnan Branch of China Southern Power Grid Co., Ltd., this paper proposes an improved YOLOv8m-based model for detecting foreign objects on transmission lines. Experiments are conducted on a dataset collected from Yunnan Power Grid. The proposed model enhances the original YOLOv8m by in-corporating a Global Attention Module (GAM) into the backbone to focus on occluded foreign objects, replacing the SPPF module with the SPPCSPC module to augment the model's multiscale feature extraction capability, and introducing the Focal-EIoU loss function to address the issue of high- and low-quality sample imbalances. These improvements accelerate model convergence and enhance detection accuracy. The experimental results demonstrate that our proposed model achieves a 2.7% increase in mAP_0.5, a 4% increase in mAP_0.5:0.95, and a 6% increase in recall.

arXiv:2005.07344

Resisting Crowd Occlusion and Hard Negatives for Pedestrian Detection in the Wild

Pedestrian detection has been heavily studied in the last decade due to its wide application. Despite incremental progress, crowd occlusion and hard negatives are still challenging current state-of-the-art pedestrian detectors. In this paper, we offer two approaches based on the general region-based detection framework to tackle these challenges. Specifically, to address the occlusion, we design a novel coulomb loss as a regulator on bounding box regression, in which proposals are attracted by their target instance and repelled by the adjacent non-target instances. For hard negatives, we propose an efficient semantic-driven strategy for selecting anchor locations, which can sample informative negative examples at training phase for classification refinement. It is worth noting that these methods can also be applied to general object detection domain, and trainable in an end-to-end manner. We achieves consistently high performance on the Caltech-USA and CityPersons benchmarks.

arXiv:2109.12709

Automated Multi-Process CTC Detection using Deep Learning

Circulating Tumor Cells (CTCs) bear great promise as biomarkers in tumor prognosis. However, the process of identification and later enumeration of CTCs require manual labor, which is error-prone and time-consuming. The recent developments in object detection via Deep Learning using Mask-RCNNs and wider availability of pre-trained models have enabled sensitive tasks with limited data of such to be tackled with unprecedented accuracy. In this report, we present a novel 3-stage detection model for automated identification of Circulating Tumor Cells in multi-channel darkfield microscopic images comprised of: RetinaNet based identification of Cytokeratin (CK) stains, Mask-RCNN based cell detection of DAPI cell nuclei and Otsu thresholding to detect CD-45s. The training dataset is composed of 46 high variance data points, with 10 Negative and 36 Positive data points. The test set is composed of 420 negative data points. The final accuracy of the pipeline is 98.81%.

arXiv:2404.06832공식 코드 · Papers with Code

SplatPose & Detect: Pose-Agnostic 3D Anomaly Detection

Detecting anomalies in images has become a well-explored problem in both academia and industry. State-of-the-art algorithms are able to detect defects in increasingly difficult settings and data modalities. However, most current methods are not suited to address 3D objects captured from differing poses. While solutions using Neural Radiance Fields (NeRFs) have been proposed, they suffer from excessive computation requirements, which hinder real-world usability. For this reason, we propose the novel 3D Gaussian splatting-based framework SplatPose which, given multi-view images of a 3D object, accurately estimates the pose of unseen views in a differentiable manner, and detects anomalies in them. We achieve state-of-the-art results in both training and inference speed, and detection performance, even when using less training data than competing methods. We thoroughly evaluate our framework using the recently proposed Pose-agnostic Anomaly Detection benchmark and its multi-pose anomaly detection (MAD) data set.

arXiv:2412.20911공식 코드 · Papers with Code

TiGDistill-BEV: Multi-view BEV 3D Object Detection via Target Inner-Geometry Learning Distillation

Accurate multi-view 3D object detection is essential for applications such as autonomous driving. Researchers have consistently aimed to leverage LiDAR's precise spatial information to enhance camera-based detectors through methods like depth supervision and bird-eye-view (BEV) feature distillation. However, existing approaches often face challenges due to the inherent differences between LiDAR and camera data representations. In this paper, we introduce the TiGDistill-BEV, a novel approach that effectively bridges this gap by leveraging the strengths of both sensors. Our method distills knowledge from diverse modalities(e.g., LiDAR) as the teacher model to a camera-based student detector, utilizing the Target Inner-Geometry learning scheme to enhance camera-based BEV detectors through both depth and BEV features by leveraging diverse modalities. Specially, we propose two key modules: an inner-depth supervision module to learn the low-level relative depth relations within objects which equips detectors with a deeper understanding of object-level spatial structures, and an inner-feature BEV distillation module to transfer high-level semantics of different key points within foreground targets. To further alleviate the domain gap, we incorporate both inter-channel and inter-keypoint distillation to model feature similarity. Extensive experiments on the nuScenes benchmark demonstrate that TiGDistill-BEV significantly boosts camera-based only detectors achieving a state-of-the-art with 62.8% NDS and surpassing previous methods by a significant margin. The codes is available at: https://github.com/Public-BOTs/TiGDistill-BEV.git.

arXiv:2501.04440공식 코드 · Papers with Code

RSAR: Restricted State Angle Resolver and Rotated SAR Benchmark

Rotated object detection has made significant progress in the optical remote sensing. However, advancements in the Synthetic Aperture Radar (SAR) field are laggard behind, primarily due to the absence of a large-scale dataset. Annotating such a dataset is inefficient and costly. A promising solution is to employ a weakly supervised model (e.g., trained with available horizontal boxes only) to generate pseudo-rotated boxes for reference before manual calibration. Unfortunately, the existing weakly supervised models exhibit limited accuracy in predicting the object's angle. Previous works attempt to enhance angle prediction by using angle resolvers that decouple angles into cosine and sine encodings. In this work, we first reevaluate these resolvers from a unified perspective of dimension mapping and expose that they share the same shortcomings: these methods overlook the unit cycle constraint inherent in these encodings, easily leading to prediction biases. To address this issue, we propose the Unit Cycle Resolver, which incorporates a unit circle constraint loss to improve angle prediction accuracy. Our approach can effectively improve the performance of existing state-of-the-art weakly supervised methods and even surpasses fully supervised models on existing optical benchmarks (i.e., DOTA-v1.0 dataset). With the aid of UCR, we further annotate and introduce RSAR, the largest multi-class rotated SAR object detection dataset to date. Extensive experiments on both RSAR and optical datasets demonstrate that our UCR enhances angle prediction accuracy. Our dataset and code can be found at: https://github.com/zhasion/RSAR.

arXiv:2502.08373공식 코드 · Papers with Code

Uncertainty Aware Human-machine Collaboration in Camouflaged Object Detection

Camouflaged Object Detection (COD), the task of identifying objects concealed within their environments, has seen rapid growth due to its wide range of practical applications. A key step toward developing trustworthy COD systems is the estimation and effective utilization of uncertainty. In this work, we propose a human-machine collaboration framework for classifying the presence of camouflaged objects, leveraging the complementary strengths of computer vision (CV) models and noninvasive brain-computer interfaces (BCIs). Our approach introduces a multiview backbone to estimate uncertainty in CV model predictions, utilizes this uncertainty during training to improve efficiency, and defers low-confidence cases to human evaluation via RSVP-based BCIs during testing for more reliable decision-making. We evaluated the framework in the CAMO dataset, achieving state-of-the-art results with an average improvement of 4.56\% in balanced accuracy (BA) and 3.66\% in the F1 score compared to existing methods. For the best-performing participants, the improvements reached 7.6\% in BA and 6.66\% in the F1 score. Analysis of the training process revealed a strong correlation between our confidence measures and precision, while an ablation study confirmed the effectiveness of the proposed training policy and the human-machine collaboration strategy. In general, this work reduces human cognitive load, improves system reliability, and provides a strong foundation for advancements in real-world COD applications and human-computer interaction. Our code and data are available at: https://github.com/ziyuey/Uncertainty-aware-human-machine-collaboration-in-camouflaged-object-identification.

arXiv:2108.08482공식 코드 · Papers with Code

VIL-100: A New Dataset and A Baseline Model for Video Instance Lane Detection

Lane detection plays a key role in autonomous driving. While car cameras always take streaming videos on the way, current lane detection works mainly focus on individual images (frames) by ignoring dynamics along the video. In this work, we collect a new video instance lane detection (VIL-100) dataset, which contains 100 videos with in total 10,000 frames, acquired from different real traffic scenarios. All the frames in each video are manually annotated to a high-quality instance-level lane annotation, and a set of frame-level and video-level metrics are included for quantitative performance evaluation. Moreover, we propose a new baseline model, named multi-level memory aggregation network (MMA-Net), for video instance lane detection. In our approach, the representation of current frame is enhanced by attentively aggregating both local and global memory features from other frames. Experiments on the new collected dataset show that the proposed MMA-Net outperforms state-of-the-art lane detection methods and video object segmentation methods. We release our dataset and code at https://github.com/yujun0-0/MMA-Net.

arXiv:1712.08062

Note on Attacking Object Detectors with Adversarial Stickers

Deep learning has proven to be a powerful tool for computer vision and has seen widespread adoption for numerous tasks. However, deep learning algorithms are known to be vulnerable to adversarial examples. These adversarial inputs are created such that, when provided to a deep learning algorithm, they are very likely to be mislabeled. This can be problematic when deep learning is used to assist in safety critical decisions. Recent research has shown that classifiers can be attacked by physical adversarial examples under various physical conditions. Given the fact that state-of-the-art objection detection algorithms are harder to be fooled by the same set of adversarial examples, here we show that these detectors can also be attacked by physical adversarial examples. In this note, we briefly show both static and dynamic test results. We design an algorithm that produces physical adversarial inputs, which can fool the YOLO object detector and can also attack Faster-RCNN with relatively high success rate based on transferability. Furthermore, our algorithm can compress the size of the adversarial inputs to stickers that, when attached to the targeted object, result in the detector either mislabeling or not detecting the object a high percentage of the time. This note provides a small set of results. Our upcoming paper will contain a thorough evaluation on other object detectors, and will present the algorithm.

arXiv:1705.03111

CAD Priors for Accurate and Flexible Instance Reconstruction

We present an efficient and automatic approach for accurate reconstruction of instances of big 3D objects from multiple, unorganized and unstructured point clouds, in presence of dynamic clutter and occlusions. In contrast to conventional scanning, where the background is assumed to be rather static, we aim at handling dynamic clutter where background drastically changes during the object scanning. Currently, it is tedious to solve this with available methods unless the object of interest is first segmented out from the rest of the scene. We address the problem by assuming the availability of a prior CAD model, roughly resembling the object to be reconstructed. This assumption almost always holds in applications such as industrial inspection or reverse engineering. With aid of this prior acting as a proxy, we propose a fully enhanced pipeline, capable of automatically detecting and segmenting the object of interest from scenes and creating a pose graph, online, with linear complexity. This allows initial scan alignment to the CAD model space, which is then refined without the CAD constraint to fully recover a high fidelity 3D reconstruction, accurate up to the sensor noise level. We also contribute a novel object detection method, local implicit shape models (LISM) and give a fast verification scheme. We evaluate our method on multiple datasets, demonstrating the ability to accurately reconstruct objects from small sizes up to $125m^3$.

arXiv:2305.10270

Boosting Local Spectro-Temporal Features for Speech Analysis

We introduce the problem of phone classification in the context of speech recognition, and explore several sets of local spectro-temporal features that can be used for phone classification. In particular, we present some preliminary results for phone classification using two sets of features that are commonly used for object detection: Haar features and SVM-classified Histograms of Gradients (HoG).

arXiv:2303.15728

DiffULD: Diffusive Universal Lesion Detection

Universal Lesion Detection (ULD) in computed tomography (CT) plays an essential role in computer-aided diagnosis. Promising ULD results have been reported by anchor-based detection designs, but they have inherent drawbacks due to the use of anchors: i) Insufficient training targets and ii) Difficulties in anchor design. Diffusion probability models (DPM) have demonstrated outstanding capabilities in many vision tasks. Many DPM-based approaches achieve great success in natural image object detection without using anchors. But they are still ineffective for ULD due to the insufficient training targets. In this paper, we propose a novel ULD method, DiffULD, which utilizes DPM for lesion detection. To tackle the negative effect triggered by insufficient targets, we introduce a novel center-aligned bounding box padding strategy that provides additional high-quality training targets yet avoids significant performance deterioration. DiffULD is inherently advanced in locating lesions with diverse sizes and shapes since it can predict with arbitrary boxes. Experiments on the benchmark dataset DeepLesion show the superiority of DiffULD when compared to state-of-the-art ULD approaches.

arXiv:2402.02026공식 코드 · Papers with Code

Multimodal-Enhanced Objectness Learner for Corner Case Detection in Autonomous Driving

Previous works on object detection have achieved high accuracy in closed-set scenarios, but their performance in open-world scenarios is not satisfactory. One of the challenging open-world problems is corner case detection in autonomous driving. Existing detectors struggle with these cases, relying heavily on visual appearance and exhibiting poor generalization ability. In this paper, we propose a solution by reducing the discrepancy between known and unknown classes and introduce a multimodal-enhanced objectness notion learner. Leveraging both vision-centric and image-text modalities, our semi-supervised learning framework imparts objectness knowledge to the student model, enabling class-aware detection. Our approach, Multimodal-Enhanced Objectness Learner (MENOL) for Corner Case Detection, significantly improves recall for novel classes with lower training costs. By achieving a 76.6% mAR-corner and 79.8% mAR-agnostic on the CODA-val dataset with just 5100 labeled training images, MENOL outperforms the baseline ORE by 71.3% and 60.6%, respectively. The code will be available at https://github.com/tryhiseyyysum/MENOL.

arXiv:2503.23200공식 코드 · Papers with Code

A GAN-Enhanced Deep Learning Framework for Rooftop Detection from Historical Aerial Imagery

Accurate rooftop detection from historical aerial imagery is vital for examining long-term urban development and human settlement patterns. However, black-and-white analog photographs pose significant challenges for modern object detection frameworks due to their limited spatial resolution, lack of color information, and archival degradation. To address these limitations, this study introduces a two-stage image enhancement pipeline based on Generative Adversarial Networks (GANs): image colorization using DeOldify, followed by super-resolution enhancement with Real-ESRGAN. The enhanced images were then used to train and evaluate rooftop detection models, including Faster R-CNN, DETReg, and YOLOv11n. Results show that combining colorization with super-resolution substantially improves detection performance, with YOLOv11n achieving a mean Average Precision (mAP) exceeding 85%. This reflects an improvement of approximately 40% over original black-and-white images and 20% over images enhanced through colorization alone. The proposed method effectively bridges the gap between archival imagery and contemporary deep learning techniques, enabling more reliable extraction of building footprints from historical aerial photographs.