Recently, \textit{passive behavioral biometrics} (e.g., gesture or footstep) have become promising complements to conventional user identification methods (e.g., face or fingerprint) under special situations, yet existing sensing technologies require lengthy measurement traces and cannot identify multiple users at the same time. To this end, we propose \systemname\ as a passive multi-person identification system leveraging deep learning enabled footstep separation and recognition. \systemname\ passively identifies a user by deciphering the unique "footprints" in its footstep. Different from existing gait-enabled recognition systems incurring a long sensing delay to acquire many footsteps, \systemname\ can recognize a person by as few as only one step, substantially cutting the identification latency. To make \systemname\ adaptive to walking pace variations, environmental dynamics, and even unseen targets, we apply an adversarial learning technique to improve its domain generalisability and identification accuracy. Finally, \systemname\ can defend itself against replay attack, enabled by the richness of footstep and spatial awareness. We implement a \systemname\ prototype using commodity hardware and evaluate it in typical indoor settings. Evaluation results demonstrate a cross-domain identification accuracy of over 90\%.
For massive machine-type communications, centralized control may incur a prohibitively high overhead. Grant-free non-orthogonal multiple access (NOMA) provides possible solutions, yet poses new challenges for efficient receiver design. In this paper, we develop a joint user identification, channel estimation, and signal detection (JUICESD) algorithm. We divide the whole detection scheme into two modules: slot-wise multi-user detection (SMD) and combined signal and channel estimation (CSCE). SMD is designed to decouple the transmissions of different users by leveraging the approximate message passing (AMP) algorithms, and CSCE is designed to deal with the nonlinear coupling of activity state, channel coefficient and transmit signal of each user separately. To address the problem that the exact calculation of the messages exchanged within CSCE and between the two modules is complicated due to phase ambiguity issues, this paper proposes a rotationally invariant Gaussian mixture (RIGM) model, and develops an efficient JUICESD-RIGM algorithm. JUICESD-RIGM achieves a performance close to JUICESD with a much lower complexity. Capitalizing on the feature of RIGM, we further analyze the performance of JUICESD-RIGM with state evolution techniques. Numerical results demonstrate that the proposed algorithms achieve a significant performance improvement over the existing alternatives, and the derived state evolution method predicts the system performance accurately.
Joint user identification and channel estimation (JUICE) is a main challenge in grant-free massive machine-type communications (mMTC). The sparse pattern in users' activity allows to solve the JUICE as a compressed sensing problem in a multiple measurement vector (MMV) setup. This paper addresses the JUICE under the practical spatially correlated fading channel. We formulate the JUICE as an iterative reweighted $\ell_{2,1}$-norm optimization. We develop a computationally efficient alternating direction method of multipliers (ADMM) approach to solve it. In particular, by leveraging the second-order statistics of the channels, we reformulate the JUICE problem to exploit the covariance information and we derive its ADMM-based solution. The simulation results highlight the significant improvements brought by the proposed approach in terms of channel estimation and activity detection performances.
Existing multi-turn context-response matching methods mainly concentrate on obtaining multi-level and multi-dimension representations and better interactions between context utterances and response. However, in real-place conversation scenarios, whether a response candidate is suitable not only counts on the given dialogue context but also other backgrounds, e.g., wording habits, user-specific dialogue history content. To fill the gap between these up-to-date methods and the real-world applications, we incorporate user-specific dialogue history into the response selection and propose a personalized hybrid matching network (PHMN). Our contributions are two-fold: 1) our model extracts personalized wording behaviors from user-specific dialogue history as extra matching information; 2) we perform hybrid representation learning on context-response utterances and explicitly incorporate a customized attention mechanism to extract vital information from context-response interactions so as to improve the accuracy of matching. We evaluate our model on two large datasets with user identification, i.e., personalized Ubuntu dialogue Corpus (P-Ubuntu) and personalized Weibo dataset (P-Weibo). Experimental results confirm that our method significantly outperforms several strong models by combining personalized attention, wording behaviors, and hybrid representation learning.
In this work, we investigate the use of backscattered mm-wave radio signals for the joint tracking and recognition of identities of humans as they move within indoor environments. We build a system that effectively works with multiple persons concurrently sharing and freely moving within the same indoor space. This leads to a complicated setting, which requires one to deal with the randomness and complexity of the resulting (composite) backscattered signal. The proposed system combines several processing steps: at first, the signal is filtered to remove artifacts, reflections and random noise that do not originate from humans. Hence, a density-based classification algorithm is executed to separate the Doppler signatures of different users. The final blocks are trajectory tracking and user identification, respectively based on Kalman filters and deep neural networks. Our results demonstrate that the integration of the last-mentioned processing stages is critical towards achieving robustness and accuracy in multi-user settings. Our technique is tested both on a single-target public dataset, for which it outperforms state-of-the-art methods, and on our own measurements, obtained with a 77 GHz radar on multiple subjects simultaneously moving in two different indoor environments. The system works in an online fashion, permitting the continuous identification of multiple subjects with accuracies up to 98%, e.g., with four subjects sharing the same physical space, and with a small accuracy reduction when tested with unseen data from a challenging real-life scenario that was not part of the model learning phase.
Origin-Destination matrix estimation is a keystone for traffic representation and analysis. Traditionally estimated thanks to traffic counts, surveys and socio-economic models, recent technological advances permit to rethink the estimation problem. Road user identification technologies, such as connected GPS, Bluetooth or Wifi detectors bring additional information, that is, for a fraction of the users, the origin, the destination and to some extend the itinerary taken. In the present work, this additional information is used for the estimation of a more comprehensive traffic representation tool: the link-origin-destination matrix. Such three-dimensional matrices extend the concept of traditional origin-destination matrices by also giving information on the traffic assignment. Their estimation is solved as an inverse problem whose objective function represents a trade-off between important properties the traffic has to satisfy. This article presents the theory and how to implement such method on real dataset. With the case study of Brisbane City where over 600 hundreds Bluetooth detectors have been installed it also illustrates the opportunities such link-origin-destination matrices create for traffic analysis.
Most of the existing recommender systems assume that user's visiting history can be constantly recorded. However, in recent online services, the user identification may be usually unknown and only limited online user behaviors can be used. It is of great importance to model the temporal online user behaviors and conduct recommendation for the anonymous users. In this paper, we propose a list-wise deep neural network based architecture to model the limited user behaviors within each session. To train the model efficiently, we first design a session embedding method to pre-train a session representation, which incorporates different kinds of user search behaviors such as clicks and views. Based on the learnt session representation, we further propose a list-wise ranking model to generate the recommendation result for each anonymous user session. We conduct quantitative experiments on a recently published dataset from an e-commerce company. The evaluation results validate the effectiveness of the proposed method, which can outperform the state-of-the-art significantly.
The proliferation of Internet-enabled devices and services has led to a shifting balance between digital and analogue aspects of our everyday lives. In the face of this development there is a growing demand for the study of privacy hazards, the potential for unique user de-anonymization and information leakage between the various social media profiles many of us maintain. To enable the structured study of such adversarial effects, this paper presents a dedicated dataset of cross-platform social network personas (i.e., the same person has accounts on multiple platforms). The corpus comprises 850 users who generate predominantly English content. Each user object contains the online footprint of the same person in three distinct social networks: Twitter, Instagram and Foursquare. In total, it encompasses over 2.5M tweets, 340k check-ins and 42k Instagram posts. We describe the collection methodology, characteristics of the dataset, and how to obtain it. Finally, we discuss a common use case, cross-platform user identification.
In this work, we study the multiuser detection (MUD) problem for a grant-free massive-device multiple access (MaDMA) system, where a large number of single-antenna user devices transmit sporadic data to a multi-antenna base station (BS). Specifically, we put forth two MUD schemes, termed random sparsity learning multiuser detection (RSL-MUD) and structured sparsity learning multiuser detection (SSL-MUD) for the time-slotted and non-time-slotted grant-free MaDMA systems, respectively. In the time-slotted RSL-MUD scheme, active users generate and transmit data packets with random sparsity. In the non-time-slotted SSL-MUD scheme, we introduce a sliding-window-based detection framework, and the user signals in each observation window naturally exhibit structured sparsity. We show that by exploiting the sparsity embedded in the user signals, we can recover the user activity state, the channel, and the user data in a single phase, without using pilot signals for channel estimation and/or active user identification. To this end, we develop a message-passing based statistical inference framework for the BS to blindly detect the user data without any prior knowledge of the identities and the channel state information (CSI) of the active users. Simulation results show that our RSL-MUD and SSL-MUD schemes significantly outperform their counterpart schemes in both reducing the transmission overhead and improving the error behavior of the system.
Speaker verification has been widely and successfully adopted in many mission-critical areas for user identification. The training of speaker verification requires a large amount of data, therefore users usually need to adopt third-party data ($e.g.$, data from the Internet or third-party data company). This raises the question of whether adopting untrusted third-party data can pose a security threat. In this paper, we demonstrate that it is possible to inject the hidden backdoor for infecting speaker verification models by poisoning the training data. Specifically, we design a clustering-based attack scheme where poisoned samples from different clusters will contain different triggers ($i.e.$, pre-defined utterances), based on our understanding of verification tasks. The infected models behave normally on benign samples, while attacker-specified unenrolled triggers will successfully pass the verification even if the attacker has no information about the enrolled speaker. We also demonstrate that existing backdoor attacks cannot be directly adopted in attacking speaker verification. Our approach not only provides a new perspective for designing novel attacks, but also serves as a strong baseline for improving the robustness of verification methods. The code for reproducing main results is available at \url{https://github.com/zhaitongqing233/Backdoor-attack-against-speaker-verification}.
Nowadays, commonly-used authentication systems for mobile device users, e.g. password checking, face recognition or fingerprint scanning, are susceptible to various kinds of attacks. In order to prevent some of the possible attacks, these explicit authentication systems can be enhanced by considering a two-factor authentication scheme, in which the second factor is an implicit authentication system based on analyzing motion sensor data captured by accelerometers or gyroscopes. In order to avoid any additional burdens to the user, the registration process of the implicit authentication system must be performed quickly, i.e. the number of data samples collected from the user is typically small. In the context of designing a machine learning model for implicit user authentication based on motion signals, data augmentation can play an important role. In this paper, we study several data augmentation techniques in the quest of finding useful augmentation methods for motion sensor data. We propose a set of four research questions related to data augmentation in the context of few-shot user identification based on motion sensor signals. We conduct experiments on a benchmark data set, using two deep learning architectures, convolutional neural networks and Long Short-Term Memory networks, showing which and when data augmentation methods bring accuracy improvements. Interestingly, we find that data augmentation is not very helpful, most likely because the signal patterns useful to discriminate users are too sensitive to the transformations brought by certain data augmentation techniques. This result is somewhat contradictory to the common belief that data augmentation is expected to increase the accuracy of machine learning models.
For the time being, mobile devices employ implicit authentication mechanisms, namely, unlock patterns, PINs or biometric-based systems such as fingerprint or face recognition. While these systems are prone to well-known attacks, the introduction of an explicit and unobtrusive authentication layer can greatly enhance security. In this study, we focus on deep learning methods for explicit authentication based on motion sensor signals. In this scenario, attackers could craft adversarial examples with the aim of gaining unauthorized access and even restraining a legitimate user to access his mobile device. To our knowledge, this is the first study that aims at quantifying the impact of adversarial attacks on machine learning models used for user identification based on motion sensors. To accomplish our goal, we study multiple methods for generating adversarial examples. We propose three research questions regarding the impact and the universality of adversarial examples, conducting relevant experiments in order to answer our research questions. Our empirical results demonstrate that certain adversarial example generation methods are specific to the attacked classification model, while others tend to be generic. We thus conclude that deep neural networks trained for user identification tasks based on motion sensors are subject to a high percentage of misclassification when given adversarial input.
Voice User Interfaces (VUIs) are increasingly popular and built into smartphones, home assistants, and Internet of Things (IoT) devices. Despite offering an always-on convenient user experience, VUIs raise new security and privacy concerns for their users. In this paper, we focus on attribute inference attacks in the speech domain, demonstrating the potential for an attacker to accurately infer a target user's sensitive and private attributes (e.g. their emotion, sex, or health status) from deep acoustic models. To defend against this class of attacks, we design, implement, and evaluate a user-configurable, privacy-aware framework for optimizing speech-related data sharing mechanisms. Our objective is to enable primary tasks such as speech recognition and user identification, while removing sensitive attributes in the raw speech data before sharing it with a cloud service provider. We leverage disentangled representation learning to explicitly learn independent factors in the raw data. Based on a user's preferences, a supervision signal informs the filtering out of invariant factors while retaining the factors reflected in the selected preference. Our experimental evaluation over five datasets shows that the proposed framework can effectively defend against attribute inference attacks by reducing their success rates to approximately that of guessing at random, while maintaining accuracy in excess of 99% for the tasks of interest. We conclude that negotiable privacy settings enabled by disentangled representations can bring new opportunities for privacy-preserving applications.
We study the touchscreen data as behavioural biometrics. The goal was to create an end-to-end system that can transparently identify users using raw data from mobile devices. The touchscreen biometrics was researched only few times in series of works with disparity in used methodology and databases. In the proposed system data from the touchscreen goes directly, without any processing, to the input of a deep neural network, which is able to decide on the identity of the user. No hand-crafted features are used. The implemented classification algorithm tries to find patterns by its own from raw data. The achieved results show that the proposed deep model is sufficient enough for the given identification task. The performed tests indicate high accuracy of user identification and better EER results compared to state of the art systems. The best result achieved by our system is 0.65% EER.
In pattern recognition, digit recognition has always been a very challenging task. This paper aims to extracting a correct feature so that it can achieve better accuracy for recognition of digits. The applications of digit recognition such as in password, bank check process, etc. to recognize the valid user identification. Earlier, several researchers have used various different machine learning algorithms in pattern recognition i.e. KNN, SVM, RFC. The main objective of this work is to obtain highest accuracy 99.15% by using convolution neural network (CNN) to recognize the digit without doing too much pre-processing of dataset.
The prevalence of wearable sensors (e.g., smart wristband) is creating unprecedented opportunities to not only inform health and wellness states of individuals, but also assess and infer personal attributes, including demographic and personality attributes. However, the data captured from wearables, such as heart rate or number of steps, present two key challenges: 1) the time series is often of variable-length and incomplete due to different data collection periods (e.g., wearing behavior varies by person); and 2) inter-individual variability to external factors like stress and environment. This paper addresses these challenges and brings us closer to the potential of personalized insights about an individual, taking the leap from quantified self to qualified self. Specifically, HeartSpace proposed in this paper encodes time series data with variable-length and missing values via the integration of a time series encoding module and a pattern aggregation network. Additionally, HeartSpace implements a Siamese-triplet network to optimize representations by jointly capturing intra- and inter-series correlations during the embedding learning process. The empirical evaluation over two different real-world data presents significant performance gains overstate-of-the-art baselines in a variety of applications, including personality prediction, demographics inference, and user identification.
In this paper, we propose a deep learning approach for smartphone user identification based on analyzing motion signals recorded by the accelerometer and the gyroscope, during a single tap gesture performed by the user on the screen. We transform the discrete 3-axis signals from the motion sensors into a gray-scale image representation which is provided as input to a convolutional neural network (CNN) that is pre-trained for multi-class user classification. In the pre-training stage, we benefit from different users and multiple samples per user. After pre-training, we use our CNN as feature extractor, generating an embedding associated to each single tap on the screen. The resulting embeddings are used to train a Support Vector Machines (SVM) model in a few-shot user identification setting, i.e. requiring only 20 taps on the screen during the registration phase. We compare our identification system based on CNN features with two baseline systems, one that employs handcrafted features and another that employs recurrent neural network (RNN) features. All systems are based on the same classifier, namely SVM. To pre-train the CNN and the RNN models for multi-class user classification, we use a different set of users than the set used for few-shot user identification, ensuring a realistic scenario. The empirical results demonstrate that our CNN model yields a top accuracy of 89.75% in multi-class user classification and a top accuracy of 96.72% in few-shot user identification. In conclusion, we believe that our system is ready for practical use, having a better generalization capacity than both baselines.
Identification using biometrics is an important yet challenging task. Abundant research has been conducted on identifying personal identity or gender using given signals. Various types of biometrics such as electrocardiogram (ECG), electroencephalogram (EEG), face, fingerprint, and voice have been used for these tasks. Most research has only focused on single modality or a single task, while the combination of input modality or tasks is yet to be investigated. In this paper, we propose deep identification and gender classification using multimodal biometrics. Our model uses ECG, fingerprint, and facial data. It then performs two tasks: gender identification and classification. By engaging multi-modality, a single model can handle various input domains without training each modality independently, and the correlation between domains can increase its generalization performance on the tasks.
This paper presents an efficient approach for subsequence search in data streams. The problem consists in identifying coherent repetitions of a given reference time-series, eventually multi-variate, within a longer data stream. Dynamic Time Warping (DTW) is the metric most widely used to implement pattern query, but its computational complexity is a well-known issue. In this paper we present an approach aimed at learning a kernel able to approximate DTW to be used for efficiently analyse streaming data collected from wearable sensors, reducing the burden of computation. Contrary to kernel, DTW allows for comparing time series with different length. Thus, to use a kernel, a feature embedding is used to represent a time-series as a fixed length vector. Each vector component is the DTW between the given time-series and a set of 'basis' series, usually randomly chosen. The vector size is the number of basis series used for the feature embedding. Searching for the portion of the data stream minimizing the DTW with the reference subsequence leads to a global optimization problem. The proposed approach has been validated on a benchmark dataset related to the identification of users depending on their walking activity. A comparison with a traditional DTW implementation is also provided.
Publishing datasets plays an essential role in open data research and promoting transparency of government agencies. However, such data publication might reveal users' private information. One of the most sensitive sources of data is spatiotemporal trajectory datasets. Unfortunately, merely removing unique identifiers cannot preserve the privacy of users. Adversaries may know parts of the trajectories or be able to link the published dataset to other sources for the purpose of user identification. Therefore, it is crucial to apply privacy preserving techniques before the publication of spatiotemporal trajectory datasets. In this paper, we propose a robust framework for the anonymization of spatiotemporal trajectory datasets termed as machine learning based anonymization (MLA). By introducing a new formulation of the problem, we are able to apply machine learning algorithms for clustering the trajectories and propose to use $k$-means algorithm for this purpose. A variation of $k$-means algorithm is also proposed to preserve the privacy in overly sensitive datasets. Moreover, we improve the alignment process by considering multiple sequence alignment as part of the MLA. The framework and all the proposed algorithms are applied to TDrive and Geolife location datasets. The experimental results indicate a significantly higher utility of datasets by anonymization based on MLA framework.