Intelligent traffic signal control is essential to modern urban management, with important impacts on economic efficiency, environmental sustainability, and quality of daily life. However, in current decades, it continues to pose significant challenges in managing large-scale traffic networks, coordinating intersections, and ensuring robustness under uncertain traffic conditions. This paper presents a scalable multi-objective optimization approach for robust traffic signal control in dynamic and uncertain urban environments. A multi-objective optimization model is proposed in this paper, which incorporates stochastic variables and probabilistic traffic patterns to capture traffic flow dynamics and uncertainty. We propose an algorithm named Adaptive Hybrid Multi-Objective Optimization Algorithm (AHMOA), which addresses the uncertainties of city traffic, including network-wide signal coordination, fluctuating patterns, and environmental impacts. AHMOA simultaneously optimizes multiple objectives, such as average delay, network stability, and system robustness, while adapting to unpredictable changes in traffic. The algorithm combines evolutionary strategies with an adaptive mechanism to balance exploration and exploitation, and incorporates a memory-based evaluation mechanism to leverage historical traffic data. Simulations are conducted in different cities including Manhattan, Paris, Sao Paulo, and Istanbul. The experimental results demonstrate that AHMOA consistently outperforms several state-of-the-art algorithms and the algorithm is competent to provide scalable, robust Pareto optimal solutions for managing complex traffic systems under uncertain environments.
Efficient traffic signal control is essential for managing urban transportation, minimizing congestion, and improving safety and sustainability. Reinforcement Learning (RL) has emerged as a promising approach to enhancing adaptive traffic signal control (ATSC) systems, allowing controllers to learn optimal policies through interaction with the environment. However, challenges arise due to partial observability (PO) in traffic networks, where agents have limited visibility, hindering effectiveness. This paper presents the integration of Transformer-based controllers into ATSC systems to address PO effectively. We propose strategies to enhance training efficiency and effectiveness, demonstrating improved coordination capabilities in real-world scenarios. The results showcase the Transformer-based model's ability to capture significant information from historical observations, leading to better control policies and improved traffic flow. This study highlights the potential of leveraging the advanced Transformer architecture to enhance urban transportation management.
The growing demand for road use in urban areas has led to significant traffic congestion, posing challenges that are costly to mitigate through infrastructure expansion alone. As an alternative, optimizing existing traffic management systems, particularly through adaptive traffic signal control, offers a promising solution. This paper explores the use of Reinforcement Learning (RL) to enhance traffic signal operations at intersections, aiming to reduce congestion without extensive sensor networks. We introduce two RL-based algorithms: a turn-based agent, which dynamically prioritizes traffic signals based on real-time queue lengths, and a time-based agent, which adjusts signal phase durations according to traffic conditions while following a fixed phase cycle. By representing the state as a scalar queue length, our approach simplifies the learning process and lowers deployment costs. The algorithms were tested in four distinct traffic scenarios using seven evaluation metrics to comprehensively assess performance. Simulation results demonstrate that both RL algorithms significantly outperform conventional traffic signal control systems, highlighting their potential to improve urban traffic flow efficiently.
Urban traffic is subject to disruptions that cause extended waiting time and safety issues at signalized intersections. While numerous studies have addressed the issue of intelligent traffic systems in the context of various disturbances, traffic signal malfunction, a common real-world occurrence with significant repercussions, has received comparatively limited attention. The primary objective of this research is to mitigate the adverse effects of traffic signal malfunction, such as traffic congestion and collision, by optimizing the control of neighboring functioning signals. To achieve this goal, this paper presents a novel traffic signal control framework (MalLight), which leverages an Influence-aware State Aggregation Module (ISAM) and an Influence-aware Reward Aggregation Module (IRAM) to achieve coordinated control of surrounding traffic signals. To the best of our knowledge, this study pioneers the application of a Reinforcement Learning(RL)-based approach to address the challenges posed by traffic signal malfunction. Empirical investigations conducted on real-world datasets substantiate the superior performance of our proposed methodology over conventional and deep learning-based alternatives in the presence of signal malfunction, with reduction of throughput alleviated by as much as 48.6$\%$.
This paper introduces SynTraC, the first public image-based traffic signal control dataset, aimed at bridging the gap between simulated environments and real-world traffic management challenges. Unlike traditional datasets for traffic signal control which aim to provide simplified feature vectors like vehicle counts from traffic simulators, SynTraC provides real-style images from the CARLA simulator with annotated features, along with traffic signal states. This image-based dataset comes with diverse real-world scenarios, including varying weather and times of day. Additionally, SynTraC also provides different reward values for advanced traffic signal control algorithms like reinforcement learning. Experiments with SynTraC demonstrate that it is still an open challenge to image-based traffic signal control methods compared with feature-based control methods, indicating our dataset can further guide the development of future algorithms. The code for this paper can be found in \url{https://github.com/DaRL-LibSignal/SynTraC}.SynTraC
This research introduces an innovative method for adaptive traffic signal control (ATSC) through the utilization of multi-objective deep reinforcement learning (DRL) techniques. The proposed approach aims to enhance control strategies at intersections while simultaneously addressing safety, efficiency, and decarbonization objectives. Traditional ATSC methods typically prioritize traffic efficiency and often struggle to adapt to real-time dynamic traffic conditions. To address these challenges, the study suggests a DRL-based ATSC algorithm that incorporates the Dueling Double Deep Q Network (D3QN) framework. The performance of this algorithm is assessed using a simulated intersection in Changsha, China. Notably, the proposed ATSC algorithm surpasses both traditional ATSC and ATSC algorithms focused solely on efficiency optimization by achieving over a 16% reduction in traffic conflicts and a 4% decrease in carbon emissions. Regarding traffic efficiency, waiting time is reduced by 18% compared to traditional ATSC, albeit showing a slight increase (0.64%) compared to the DRL-based ATSC algorithm integrating the D3QN framework. This marginal increase suggests a trade-off between efficiency and other objectives like safety and decarbonization. Additionally, the proposed approach demonstrates superior performance, particularly in scenarios with high traffic demand, across all three objectives. These findings contribute to advancing traffic control systems by offering a practical and effective solution for optimizing signal control strategies in real-world traffic situations.
This paper introduces MoveLight, a novel traffic signal control system that enhances urban traffic management through movement-centric deep reinforcement learning. By leveraging detailed real-time data and advanced machine learning techniques, MoveLight overcomes the limitations of traditional traffic signal control methods. It employs a lane-level control approach using the FRAP algorithm to achieve dynamic and adaptive traffic signal control, optimizing traffic flow, reducing congestion, and improving overall efficiency. Our research demonstrates the scalability and effectiveness of MoveLight across single intersections, arterial roads, and network levels. Experimental results using real-world datasets from Cologne and Hangzhou show significant improvements in metrics such as queue length, delay, and throughput compared to existing methods. This study highlights the transformative potential of deep reinforcement learning in intelligent traffic signal control, setting a new standard for sustainable and efficient urban transportation systems.
This article proposes a novel approach to traffic signal control that combines phase re-service with reinforcement learning (RL). The RL agent directly determines the duration of the next phase in a pre-defined sequence. Before the RL agent's decision is executed, we use the shock wave theory to estimate queue expansion at the designated movement allowed for re-service and decide if phase re-service is necessary. If necessary, a temporary phase re-service is inserted before the next regular phase. We formulate the RL problem as a semi-Markov decision process (SMDP) and solve it with proximal policy optimization (PPO). We conducted a series of experiments that showed significant improvements thanks to the introduction of phase re-service. Vehicle delays are reduced by up to 29.95% of the average and up to 59.21% of the standard deviation. The number of stops is reduced by 26.05% on average with 45.77% less standard deviation.
Currently, traffic signal control (TSC) methods based on reinforcement learning (RL) have proven superior to traditional methods. However, most RL methods face difficulties when applied in the real world due to three factors: input, output, and the cycle-flow relation. The industry's observable input is much more limited than simulation-based RL methods. For real-world solutions, only flow can be reliably collected, whereas common RL methods need more. For the output action, most RL methods focus on acyclic control, which real-world signal controllers do not support. Most importantly, industry standards require a consistent cycle-flow relationship: non-decreasing and different response strategies for low, medium, and high-level flows, which is ignored by the RL methods. To narrow the gap between RL methods and industry standards, we innovatively propose to use industry solutions to guide the RL agent. Specifically, we design behavior cloning and curriculum learning to guide the agent to mimic and meet industry requirements and, at the same time, leverage the power of exploration and exploitation in RL for better performance. We theoretically prove that such guidance can largely decrease the sample complexity to polynomials in the horizon when searching for an optimal policy. Our rigid experiments show that our method has good cycle-flow relation and superior performance.
Urban congestion remains a critical challenge, with traffic signal control (TSC) emerging as a potent solution. TSC is often modeled as a Markov Decision Process problem and then solved using reinforcement learning (RL), which has proven effective. However, the existing RL-based TSC system often overlooks imperfect observations caused by degraded communication, such as packet loss, delays, and noise, as well as rare real-life events not included in the reward function, such as unconsidered emergency vehicles. To address these limitations, we introduce a novel integration framework that combines a large language model (LLM) with RL. This framework is designed to manage overlooked elements in the reward function and gaps in state information, thereby enhancing the policies of RL agents. In our approach, RL initially makes decisions based on observed data. Subsequently, LLMs evaluate these decisions to verify their reasonableness. If a decision is found to be unreasonable, it is adjusted accordingly. Additionally, this integration approach can be seamlessly integrated with existing RL-based TSC systems without necessitating modifications. Extensive testing confirms that our approach reduces the average waiting time by $17.5\%$ in degraded communication conditions as compared to traditional RL methods, underscoring its potential to advance practical RL applications in intelligent transportation systems. The related code can be found at \url{https://github.com/Traffic-Alpha/iLLM-TSC}.
Coordinated traffic signals seek to provide uninterrupted flow through a series of closely spaced intersections, typically using pre-defined fixed signal timings and offsets. Adaptive traffic signals dynamically change signal timings based on observed traffic conditions in a way that might disrupt coordinated movements, particularly when these decisions are made independently at each intersection. To alleviate this issue, this paper introduces a novel Max Pressure-based traffic signal framework that can provide coordination even under decentralized decision-making. The proposed Coordinated Max Pressure (C-MP) algorithm uses the space mean speeds of vehicles to explicitly detect freely flowing platoons of vehicles and prioritizes their movement along a corridor. Specifically, upstream platoons are detected and their weight in the MP framework increased to provide priority, while downstream platoons are detected and their weight reduced to ensure smooth traffic flow across corridors. The study analytically proves that C-MP maintains the desirable maximum stability property, while micro-simulation analyses conducted on an arterial network demonstrate its ability to achieve a larger stable region compared to benchmark MP control policies. Simulation results also reveal that the proposed control algorithm can effectively coordinate traffic signals in both directions along an arterial without explicitly assigned offsets or constraints. The results also reveal C-MP's superiority to benchmark coordination strategies in reducing travel time, and fuel consumption both at the corridor level and the network level by balancing the negative impact imparted to vehicles in the minor direction.
Max-pressure (MP) is a decentralized adaptive traffic signal control approach that has been shown to maximize throughput for private vehicles. However, MP-based signal control algorithms do not differentiate the movement of transit vehicles from private vehicles or between high and single-occupancy private vehicles. Prioritizing the movement of transit or other high occupancy vehicles (HOVs) is vital to reduce congestion and improve the reliability and efficiency of transit operations. This study proposes OCC-MP: a novel MP-based algorithm that considers both vehicle queues and passenger occupancies in computing the weights of movements. By weighing movements with higher passenger occupancies more heavily, transit and other HOVs are implicitly provided with priority, while accounting for any negative impacts of that priority on single occupancy vehicles. And, unlike rule-based transit signal priority (TSP) strategies, OCC-MP more naturally also accommodates conflicting transit routes at a signalized intersection and facilitates their movement, even in mixed traffic without dedicated lanes. Simulations on a grid network under varying demands and transit configurations demonstrate the effectiveness of OCC-MP at providing TSP while simultaneously reducing the negative impact imparted onto lower occupancy private vehicles. Furthermore, OCC-MP is shown to have a larger stable region for demand compared to rule-based TSP strategies integrated into the MP framework. The performance of OCC-MP is also shown to be robust to errors in passenger occupancy information from transit vehicles and can be applied when passenger occupancies of private vehicles are not available. Finally, OCC-MP can be applied in a partially connected vehicle (CV) environment when a subset of vehicles is able to provide information to the signal controller, outperforming baseline methods at low CV penetration rates.
Due to accelerating urbanization, the importance of solving the signal control problem increases. This paper analyzes various existing methods and suggests options for increasing the number of agents to reduce the average travel time. Experiments were carried out with 2 datasets. The results show that in some cases, the implementation of multiple agents can improve existing methods. For a fine-tuned large language model approach there is small enhancement on all metrics.
With the development of artificial intelligence techniques, transportation system optimization is evolving from traditional methods relying on expert experience to simulation and learning-based decision and optimization methods. Learning-based optimization methods require extensive interactions with highly realistic microscopic traffic simulators. However, existing microscopic traffic simulators are inefficient in large-scale scenarios and thus fail to support the adoption of these methods in large-scale transportation system optimization scenarios. In addition, the optimization scenarios supported by existing simulators are limited, mainly focusing on the traffic signal control. To address these challenges, we propose the first open-source GPU-accelerated large-scale microscopic simulator for transportation system simulation and optimization. The simulator can iterate at 84.09Hz, which achieves 88.92 times computational acceleration in the large-scale scenario with 2,464,950 vehicles compared to the best baseline CityFlow. Besides, it achieves a more realistic average road speeds simulated on real datasets by adopting the IDM model as the car-following model and the randomized MOBIL model as the lane-changing model. Based on it, we implement a set of microscopic and macroscopic controllable objects and metrics provided by Python API to support typical transportation system optimization scenarios. We choose five representative scenarios and benchmark classical rule-based algorithms, reinforcement learning algorithms, and black-box optimization algorithms in four cities. These experiments effectively demonstrate the usability of the simulator for large-scale traffic system optimization. The code of the simulator is available at https://github.com/tsinghua-fib-lab/moss. We build an open-registration web platform available at https://moss.fiblab.net to support no-code trials.
Traffic congestion in urban areas is a significant problem, leading to prolonged travel times, reduced efficiency, and increased environmental concerns. Effective traffic signal control (TSC) is a key strategy for reducing congestion. Unlike most TSC systems that rely on high-frequency control, this study introduces an innovative joint phase traffic signal cycle control method that operates effectively with varying control intervals. Our method features an adjust all phases action design, enabling simultaneous phase changes within the signal cycle, which fosters both immediate stability and sustained TSC effectiveness, especially at lower frequencies. The approach also integrates decentralized actors to handle the complexity of the action space, with a centralized critic to ensure coordinated phase adjusting. Extensive testing on both synthetic and real-world data across different intersection types and signal setups shows that our method significantly outperforms other popular techniques, particularly at high control intervals. Case studies of policies derived from traffic data further illustrate the robustness and reliability of our proposed method.
The increasingly severe congestion problem in modern cities strengthens the significance of developing city-scale traffic signal control (TSC) methods for traffic efficiency enhancement. While reinforcement learning has been widely explored in TSC, most of them still target small-scale optimization and cannot directly scale to the city level due to unbearable resource demand. Only a few of them manage to tackle city-level optimization, namely a thousand-scale optimization, by incorporating parameter-sharing mechanisms, but hardly have they fully tackled the heterogeneity of intersections and intricate between-intersection interactions inherent in real-world city road networks. To fill in the gap, we target at the two important challenges in adopting parameter-sharing paradigms to solve TSC: inconsistency of inner state representations for intersections heterogeneous in configuration, scale, and orders of available traffic phases; intricacy of impacts from neighborhood intersections that have various relative traffic relationships due to inconsistent phase orders and diverse relative positioning. Our method, CityLight, features a universal representation module that not only aligns the state representations of intersections by reindexing their phases based on their semantics and designing heterogeneity-preserving observations, but also encodes the narrowed relative traffic relation types to project the neighborhood intersections onto a uniform relative traffic impact space. We further attentively fuse neighborhood representations based on their competing relations and incorporate neighborhood-integrated rewards to boost coordination. Extensive experiments with hundreds to tens of thousands of intersections validate the surprising effectiveness and generalizability of CityLight, with an overall performance gain of 11.68% and a 22.59% improvement in transfer scenarios in throughput.
In transportation networks, intersections pose significant risks of collisions due to conflicting movements of vehicles approaching from different directions. To address this issue, various tools can exert influence on traffic safety both directly and indirectly. This study focuses on investigating the impact of adaptive signal control and connected and automated vehicles (CAVs) on intersection safety using a deep reinforcement learning approach. The objective is to assess the individual and combined effects of CAVs and adaptive traffic signal control on traffic safety, considering rear-end and crossing conflicts. The study employs a Deep Q Network (DQN) to regulate traffic signals and driving behaviors of both CAVs and Human Drive Vehicles (HDVs), and uses Time To Collision (TTC) metric to evaluate safety. The findings demonstrate a significant reduction in rear-end and crossing conflicts through the combined implementation of CAVs and DQNs-based traffic signal control. Additionally, the long-term positive effects of CAVs on safety are similar to the short-term effects of combined CAVs and DQNs-based traffic signal control. Overall, the study emphasizes the potential benefits of integrating CAVs and adaptive traffic signal control approaches in order to enhance traffic safety. The findings of this study could provide valuable insights for city officials and transportation authorities in developing effective strategies to improve safety at signalized intersections.
Effective multi-intersection collaboration is pivotal for reinforcement-learning-based traffic signal control to alleviate congestion. Existing work mainly chooses neighboring intersections as collaborators. However, quite an amount of congestion, even some wide-range congestion, is caused by non-neighbors failing to collaborate. To address these issues, we propose to separate the collaborator selection as a second policy to be learned, concurrently being updated with the original signal-controlling policy. Specifically, the selection policy in real-time adaptively selects the best teammates according to phase- and intersection-level features. Empirical results on both synthetic and real-world datasets provide robust validation for the superiority of our approach, offering significant improvements over existing state-of-the-art methods. The code is available at https://github.com/bonaldli/CoSLight.
This paper develops an adaptive traffic control policy inspired by Maximum Pressure (MP) while imposing coordination across intersections. The proposed Coordinated Maximum Pressure-plus-Penalty (CMPP) control policy features a local objective for each intersection that consists of the total pressure within the neighborhood and a penalty accounting for the queue capacities and continuous green time for certain movements. The corresponding control task is reformulated as a distributed optimization problem and solved via two customized algorithms: one based on the alternating direction method of multipliers (ADMM) and the other follows a greedy heuristic augmented with a majority vote. CMPP not only provides a theoretical guarantee of queuing network stability but also outperforms several benchmark controllers in simulations on a large-scale real traffic network with lower average travel and waiting time per vehicle, as well as less network congestion. Furthermore, CPMM with the greedy algorithm enjoys comparable computational efficiency as fully decentralized controllers without significantly compromising the control performance, which highlights its great potential for real-world deployment.
This paper describes a traffic signal control strategy that allows motorists who travel at a recommended speed on suburban arterial two-way roads with a common cycle time to make every traffic signal. A road-to-traveler-feedback-device (RTFD) advises motorists how fast they should travel to do this. Signalized arterial roads where vehicles that travel at the recommended speed make every traffic signal are termed Ride-the-Green-Wave (RGW) roads. Left-turn-arounds enable vehicles to turn left from two-way RGW-roads to intersecting/orthogonal two-way RGW-road while allowing maximum flow at the intersection. The traffic signal control technique that enables vehicles that travel at the recommended speed to make every traffic signal has been verified using a simulation program (RGW-SIM). In addition to introducing novel traffic signal control strategies, the methods presented in this paper have implications for road network design, public transport control, connected and automated vehicles and environmental impacts.