Transformers have been widely used in numerous vision problems especially for visual recognition and detection. Detection transformers are the first fully end-to-end learning systems for object detection, while vision transformers are the first fully transformer-based architecture for image classification. In this paper, we integrate Vision and Detection Transformers (ViDT) to construct an effective and efficient object detector. ViDT introduces a reconfigured attention module to extend the recent Swin Transformer to be a standalone object detector, followed by a computationally efficient transformer decoder that exploits multi-scale features and auxiliary techniques essential to boost the detection performance without much increase in computational load. In addition, we extend it to ViDT+ to support joint-task learning for object detection and instance segmentation. Specifically, we attach an efficient multi-scale feature fusion layer and utilize two more auxiliary training losses, IoU-aware loss and token labeling loss. Extensive evaluation results on the Microsoft COCO benchmark dataset demonstrate that ViDT obtains the best AP and latency trade-off among existing fully transformer-based object detectors, and its extended ViDT+ achieves 53.2AP owing to its high scalability for large models. The source code and trained models are available at https://github.com/naver-ai/vidt.
Object detection is one of the key tasks in many applications of computer vision. Deep Neural Networks (DNNs) are undoubtedly a well-suited approach for object detection. However, such DNNs need highly adapted hardware together with hardware-specific optimization to guarantee high efficiency during inference. This is especially the case when aiming for efficient object detection in video streaming applications on limited hardware such as edge devices. Comparing vendor-specific hardware and related optimization software pipelines in a fair experimental setup is a challenge. In this paper, we propose a framework that uses a host computer with a host software application together with a light-weight interface based on the Message Queuing Telemetry Transport (MQTT) protocol. Various different target devices with target apps can be connected via MQTT with this host computer. With well-defined and standardized MQTT messages, object detection results can be reported to the host computer, where the results are evaluated without harming or influencing the processing on the device. With this quite generic framework, we can measure the object detection performance, the runtime, and the energy efficiency at the same time. The effectiveness of this framework is demonstrated in multiple experiments that offer deep insights into the optimization of DNNs.
Drones equipped with cameras can significantly enhance human ability to perceive the world because of their remarkable maneuverability in 3D space. Ironically, object detection for drones has always been conducted in the 2D image space, which fundamentally limits their ability to understand 3D scenes. Furthermore, existing 3D object detection methods developed for autonomous driving cannot be directly applied to drones due to the lack of deformation modeling, which is essential for the distant aerial perspective with sensitive distortion and small objects. To fill the gap, this work proposes a dual-view detection system named DVDET to achieve aerial monocular object detection in both the 2D image space and the 3D physical space. To address the severe view deformation issue, we propose a novel trainable geo-deformable transformation module that can properly warp information from the drone's perspective to the BEV. Compared to the monocular methods for cars, our transformation includes a learnable deformable network for explicitly revising the severe deviation. To address the dataset challenge, we propose a new large-scale simulation dataset named AM3D-Sim, generated by the co-simulation of AirSIM and CARLA, and a new real-world aerial dataset named AM3D-Real, collected by DJI Matrice 300 RTK, in both datasets, high-quality annotations for 3D object detection are provided. Extensive experiments show that i) aerial monocular 3D object detection is feasible; ii) the model pre-trained on the simulation dataset benefits real-world performance, and iii) DVDET also benefits monocular 3D object detection for cars. To encourage more researchers to investigate this area, we will release the dataset and related code in https://github.com/PhyllisH/DVDET.
Object detection is widely used on embedded devices. With the wide availability of CNN (Convolutional Neural Networks) accelerator chips, the object detection applications are expected to run with low power consumption, and high inference speed. In addition, the CPU load is expected to be as low as possible for a CNN accelerator chip working as a co-processor with a host CPU. In this paper, we optimize the object detection model on the CNN accelerator chip by minimizing the CPU load. The resulting model is called GnetDet. The experimental result shows that the GnetDet model running on a 224mW chip achieves the speed of 106FPS with excellent accuracy.
Co-salient object detection targets at detecting co-existed salient objects among a group of images. Recently, a generalist model for segmenting everything in context, called SegGPT, is gaining public attention. In view of its breakthrough for segmentation, we can hardly wait to probe into its contribution to the task of co-salient object detection. In this report, we first design a framework to enable SegGPT for the problem of co-salient object detection. Proceed to the next step, we evaluate the performance of SegGPT on the problem of co-salient object detection on three available datasets. We achieve a finding that co-saliency scenes challenges SegGPT due to context discrepancy within a group of co-saliency images.
Deep learning models achieve remarkable accuracy in computer vision tasks, yet remain vulnerable to adversarial examples--carefully crafted perturbations to input images that can deceive these models into making confident but incorrect predictions. This vulnerability pose significant risks in high-stakes applications such as autonomous vehicles, security surveillance, and safety-critical inspection systems. While the existing literature extensively covers adversarial attacks in image classification, comprehensive analyses of such attacks on object detection systems remain limited. This paper presents a novel taxonomic framework for categorizing adversarial attacks specific to object detection architectures, synthesizes existing robustness metrics, and provides a comprehensive empirical evaluation of state-of-the-art attack methodologies on popular object detection models, including both traditional detectors and modern detectors with vision-language pretraining. Through rigorous analysis of open-source attack implementations and their effectiveness across diverse detection architectures, we derive key insights into attack characteristics. Furthermore, we delineate critical research gaps and emerging challenges to guide future investigations in securing object detection systems against adversarial threats. Our findings establish a foundation for developing more robust detection models while highlighting the urgent need for standardized evaluation protocols in this rapidly evolving domain.
We have witnessed significant progress in human-object interaction (HOI) detection. The reliance on mAP (mean Average Precision) scores as a summary metric, however, does not provide sufficient insight into the nuances of model performance (e.g., why one model is better than another), which can hinder further innovation in this field. To address this issue, in this paper, we introduce a diagnosis toolbox to provide detailed quantitative break-down analysis of HOI detection models, inspired by the success of object detection diagnosis toolboxes. We first conduct holistic investigations in the pipeline of HOI detection. By defining a set of errors and the oracles to fix each of them, we can have a quantitative analysis of the significance of different errors according to the mAP improvement obtained from fixing each error. We then delve into two sub-tasks of HOI detection: human-object pair detection and interaction classification, respectively. For the first detection task, we compute the coverage of ground-truth human-object pairs as well as the noisiness level in the detection results. For the second classification task, we measure a model's performance of differentiating positive and negative detection results and also classifying the actual interactions when the human-object pairs are correctly detected. We analyze eight state-of-the-art HOI detection models and provide valuable diagnosis insights to foster future research. For instance, our diagnosis shows that state-of-the-art model RLIPv2 outperforms others mainly because it significantly improves the multi-label interaction classification accuracy. Our toolbox is applicable for different methods across different datasets and available at https://github.com/neu-vi/Diag-HOI.
The performance of existing point cloud-based 3D object detection methods heavily relies on large-scale high-quality 3D annotations. However, such annotations are often tedious and expensive to collect. Semi-supervised learning is a good alternative to mitigate the data annotation issue, but has remained largely unexplored in 3D object detection. Inspired by the recent success of self-ensembling technique in semi-supervised image classification task, we propose SESS, a self-ensembling semi-supervised 3D object detection framework. Specifically, we design a thorough perturbation scheme to enhance generalization of the network on unlabeled and new unseen data. Furthermore, we propose three consistency losses to enforce the consistency between two sets of predicted 3D object proposals, to facilitate the learning of structure and semantic invariances of objects. Extensive experiments conducted on SUN RGB-D and ScanNet datasets demonstrate the effectiveness of SESS in both inductive and transductive semi-supervised 3D object detection. Our SESS achieves competitive performance compared to the state-of-the-art fully-supervised method by using only 50% labeled data. Our code is available at https://github.com/Na-Z/sess.
We present a new and challenging object detection dataset, ParkingSticker, which mimics the type of data available in industry problems more closely than popular existing datasets like PASCAL VOC. ParkingSticker contains 1,871 images that come from a security camera's video footage. The objective is to identify parking stickers on cars approaching a gate that the security camera faces. Bounding boxes are drawn around parking stickers in the images. The parking stickers are much smaller on average than the objects in other popular object detection datasets; this makes ParkingSticker a challenging test for object detection methods. This dataset also very realistically represents the data available in many industry problems where a customer presents a few video frames and asks for a solution to a very difficult problem. Performance of various object detection pipelines using a YOLOv2 architecture are presented and indicate that identifying the parking stickers in ParkingSticker is challenging yet feasible. We believe that this dataset will challenge researchers to solve a real-world problem with real-world constraints such as non-ideal camera positioning and small object-size-to-image-size ratios.
Enabling object detectors to recognize out-of-distribution (OOD) objects is vital for building reliable systems. A primary obstacle stems from the fact that models frequently do not receive supervisory signals from unfamiliar data, leading to overly confident predictions regarding OOD objects. Despite previous progress that estimates OOD uncertainty based on the detection model and in-distribution (ID) samples, we explore using pre-trained vision-language representations for object-level OOD detection. We first discuss the limitations of applying image-level CLIP-based OOD detection methods to object-level scenarios. Building upon these insights, we propose RUNA, a novel framework that leverages a dual encoder architecture to capture rich contextual information and employs a regional uncertainty alignment mechanism to distinguish ID from OOD objects effectively. We introduce a few-shot fine-tuning approach that aligns region-level semantic representations to further improve the model's capability to discriminate between similar objects. Our experiments show that RUNA substantially surpasses state-of-the-art methods in object-level OOD detection, particularly in challenging scenarios with diverse and complex object instances.
Oriented object detection emerges in many applications from aerial images to autonomous driving, while many existing detection benchmarks are annotated with horizontal bounding box only which is also less costive than fine-grained rotated box, leading to a gap between the readily available training corpus and the rising demand for oriented object detection. This paper proposes a simple yet effective oriented object detection approach called H2RBox merely using horizontal box annotation for weakly-supervised training, which closes the above gap and shows competitive performance even against those trained with rotated boxes. The cores of our method are weakly- and self-supervised learning, which predicts the angle of the object by learning the consistency of two different views. To our best knowledge, H2RBox is the first horizontal box annotation-based oriented object detector. Compared to an alternative i.e. horizontal box-supervised instance segmentation with our post adaption to oriented object detection, our approach is not susceptible to the prediction quality of mask and can perform more robustly in complex scenes containing a large number of dense objects and outliers. Experimental results show that H2RBox has significant performance and speed advantages over horizontal box-supervised instance segmentation methods, as well as lower memory requirements. While compared to rotated box-supervised oriented object detectors, our method shows very close performance and speed. The source code is available at PyTorch-based \href{https://github.com/yangxue0827/h2rbox-mmrotate}{MMRotate} and Jittor-based \href{https://github.com/yangxue0827/h2rbox-jittor}{JDet}.
The main essence of this paper is to investigate the performance of RetinaNet based object detectors on pedestrian detection. Pedestrian detection is an important research topic as it provides a baseline for general object detection and has a great number of practical applications like autonomous car, robotics and Security camera. Though extensive research has made huge progress in pedestrian detection, there are still many issues and open for more research and improvement. Recent deep learning based methods have shown state-of-the-art performance in computer vision tasks such as image classification, object detection, and segmentation. Wider pedestrian detection challenge aims at finding improve solutions for pedestrian detection problem. In this paper, We propose a pedestrian detection system based on RetinaNet. Our solution has scored 0.4061 mAP. The code is available at https://github.com/miltonbd/ECCV_2018_pedestrian_detection_challenege.
We define and study error detection and correction tasks that are useful for 3D reconstruction of neurons from electron microscopic imagery, and for image segmentation more generally. Both tasks take as input the raw image and a binary mask representing a candidate object. For the error detection task, the desired output is a map of split and merge errors in the object. For the error correction task, the desired output is the true object. We call this object mask pruning, because the candidate object mask is assumed to be a superset of the true object. We train multiscale 3D convolutional networks to perform both tasks. We find that the error-detecting net can achieve high accuracy. The accuracy of the error-correcting net is enhanced if its input object mask is "advice" (union of erroneous objects) from the error-detecting net.
3D object detection has achieved significant performance in many fields, e.g., robotics system, autonomous driving, and augmented reality. However, most existing methods could cause catastrophic forgetting of old classes when performing on the class-incremental scenarios. Meanwhile, the current class-incremental 3D object detection methods neglect the relationships between the object localization information and category semantic information and assume all the knowledge of old model is reliable. To address the above challenge, we present a novel Incremental 3D Object Detection framework with the guidance of prompting, i.e., I3DOD. Specifically, we propose a task-shared prompts mechanism to learn the matching relationships between the object localization information and category semantic information. After training on the current task, these prompts will be stored in our prompt pool, and perform the relationship of old classes in the next task. Moreover, we design a reliable distillation strategy to transfer knowledge from two aspects: a reliable dynamic distillation is developed to filter out the negative knowledge and transfer the reliable 3D knowledge to new detection model; the relation feature is proposed to capture the responses relation in feature space and protect plasticity of the model when learning novel 3D classes. To the end, we conduct comprehensive experiments on two benchmark datasets and our method outperforms the state-of-the-art object detection methods by 0.6% - 2.7% in terms of [email omitted].
Supervised object detection and semantic segmentation require object or even pixel level annotations. When there exist image level labels only, it is challenging for weakly supervised algorithms to achieve accurate predictions. The accuracy achieved by top weakly supervised algorithms is still significantly lower than their fully supervised counterparts. In this paper, we propose a novel weakly supervised curriculum learning pipeline for multi-label object recognition, detection and semantic segmentation. In this pipeline, we first obtain intermediate object localization and pixel labeling results for the training images, and then use such results to train task-specific deep networks in a fully supervised manner. The entire process consists of four stages, including object localization in the training images, filtering and fusing object instances, pixel labeling for the training images, and task-specific network training. To obtain clean object instances in the training images, we propose a novel algorithm for filtering, fusing and classifying object instances collected from multiple solution mechanisms. In this algorithm, we incorporate both metric learning and density-based clustering to filter detected object instances. Experiments show that our weakly supervised pipeline achieves state-of-the-art results in multi-label image classification as well as weakly supervised object detection and very competitive results in weakly supervised semantic segmentation on MS-COCO, PASCAL VOC 2007 and PASCAL VOC 2012.
Many modern approaches for object detection are two-staged pipelines. The first stage identifies regions of interest which are then classified in the second stage. Faster R-CNN is such an approach for object detection which combines both stages into a single pipeline. In this paper we apply Faster R-CNN to the task of company logo detection. Motivated by its weak performance on small object instances, we examine in detail both the proposal and the classification stage with respect to a wide range of object sizes. We investigate the influence of feature map resolution on the performance of those stages. Based on theoretical considerations, we introduce an improved scheme for generating anchor proposals and propose a modification to Faster R-CNN which leverages higher-resolution feature maps for small objects. We evaluate our approach on the FlickrLogos dataset improving the RPN performance from 0.52 to 0.71 (MABO) and the detection performance from 0.52 to 0.67 (mAP).
In the field of autonomous driving, accurate and comprehensive perception of the 3D environment is crucial. Bird's Eye View (BEV) based methods have emerged as a promising solution for 3D object detection using multi-view images as input. However, existing 3D object detection methods often ignore the physical context in the environment, such as sidewalk and vegetation, resulting in sub-optimal performance. In this paper, we propose a novel approach called SOGDet (Semantic-Occupancy Guided Multi-view 3D Object Detection), that leverages a 3D semantic-occupancy branch to improve the accuracy of 3D object detection. In particular, the physical context modeled by semantic occupancy helps the detector to perceive the scenes in a more holistic view. Our SOGDet is flexible to use and can be seamlessly integrated with most existing BEV-based methods. To evaluate its effectiveness, we apply this approach to several state-of-the-art baselines and conduct extensive experiments on the exclusive nuScenes dataset. Our results show that SOGDet consistently enhance the performance of three baseline methods in terms of nuScenes Detection Score (NDS) and mean Average Precision (mAP). This indicates that the combination of 3D object detection and 3D semantic occupancy leads to a more comprehensive perception of the 3D environment, thereby aiding build more robust autonomous driving systems. The codes are available at: https://github.com/zhouqiu/SOGDet.
Physical adversarial attacks against object detectors have seen increasing success in recent years. However, these attacks require direct access to the object of interest in order to apply a physical patch. Furthermore, to hide multiple objects, an adversarial patch must be applied to each object. In this paper, we propose a contactless translucent physical patch containing a carefully constructed pattern, which is placed on the camera's lens, to fool state-of-the-art object detectors. The primary goal of our patch is to hide all instances of a selected target class. In addition, the optimization method used to construct the patch aims to ensure that the detection of other (untargeted) classes remains unharmed. Therefore, in our experiments, which are conducted on state-of-the-art object detection models used in autonomous driving, we study the effect of the patch on the detection of both the selected target class and the other classes. We show that our patch was able to prevent the detection of 42.27% of all stop sign instances while maintaining high (nearly 80%) detection of the other classes.
Combining multiple datasets enables performance boost on many computer vision tasks. But similar trend has not been witnessed in object detection when combining multiple datasets due to two inconsistencies among detection datasets: taxonomy difference and domain gap. In this paper, we address these challenges by a new design (named Detection Hub) that is dataset-aware and category-aligned. It not only mitigates the dataset inconsistency but also provides coherent guidance for the detector to learn across multiple datasets. In particular, the dataset-aware design is achieved by learning a dataset embedding that is used to adapt object queries as well as convolutional kernels in detection heads. The categories across datasets are semantically aligned into a unified space by replacing one-hot category representations with word embedding and leveraging the semantic coherence of language embedding. Detection Hub fulfills the benefits of large data on object detection. Experiments demonstrate that joint training on multiple datasets achieves significant performance gains over training on each dataset alone. Detection Hub further achieves SoTA performance on UODB benchmark with wide variety of datasets.
Real-world deployment of reliable object detectors is crucial for applications such as autonomous driving. However, general-purpose object detectors like Faster R-CNN are prone to providing overconfident predictions for outlier objects. Recent outlier-aware object detection approaches estimate the density of instance-wide features with class-conditional Gaussians and train on synthesized outlier features from their low-likelihood regions. However, this strategy does not guarantee that the synthesized outlier features will have a low likelihood according to the other class-conditional Gaussians. We propose a novel outlier-aware object detection framework that distinguishes outliers from inlier objects by learning the joint data distribution of all inlier classes with an invertible normalizing flow. The appropriate sampling of the flow model ensures that the synthesized outliers have a lower likelihood than inliers of all object classes, thereby modeling a better decision boundary between inlier and outlier objects. Our approach significantly outperforms the state-of-the-art for outlier-aware object detection on both image and video datasets. Code available at https://github.com/nish03/FFS