PyTorchKR Papers

최신 논문

총 11,126편
태그·기간 등 상세 필터

카테고리 탐색

로그인 후 이 태그 구독

arXiv:2104.07778

Recent Advances in Domain Adaptation for the Classification of Remote Sensing Data

The success of supervised classification of remotely sensed images acquired over large geographical areas or at short time intervals strongly depends on the representativity of the samples used to train the classification algorithm and to define the model. When training samples are collected from an image (or a spatial region) different from the one used for mapping, spectral shifts between the two distributions are likely to make the model fail. Such shifts are generally due to differences in acquisition and atmospheric conditions or to changes in the nature of the object observed. In order to design classification methods that are robust to data-set shifts, recent remote sensing literature has considered solutions based on domain adaptation (DA) approaches. Inspired by machine learning literature, several DA methods have been proposed to solve specific problems in remote sensing data classification. This paper provides a critical review of the recent advances in DA for remote sensing and presents an overview of methods divided into four categories: i) invariant feature selection; ii) representation matching; iii) adaptation of classifiers and iv) selective sampling. We provide an overview of recent methodologies, as well as examples of application of the considered techniques to real remote sensing images characterized by very high spatial and spectral resolution. Finally, we propose guidelines to the selection of the method to use in real application scenarios.

arXiv:2104.07667공식 코드 · Papers with Code

Shoulder Implant X-Ray Manufacturer Classification: Exploring with Vision Transformer

Shoulder replacement surgery, also called total shoulder replacement, is a common and complex surgery in Orthopedics discipline. It involves replacing a dead shoulder joint with an artificial implant. In the market, there are many artificial implant manufacturers and each of them may produce different implants with different structures compares to other providers. The problem arises in the following situation: a patient has some problems with the shoulder implant accessory and the manufacturer of that implant maybe unknown to either the patient or the doctor, therefore, correctly identification of the manufacturer is the key prior to the treatment. In this paper, we will demonstrate different methods for classifying the manufacturer of a shoulder implant. We will use Vision Transformer approach to this task for the first time ever

논문 ID: publication/3327904

Breast cancer image classification on WSI with spatial correlations

As common cancer, breast cancer kills thousands of women every year. It's significant to provide doctors computer-aided diagnosis (CAD) to ease their workload as well as improve detection quality. Patch-level CNNs are usually used to classify the breast tissue slice, and the CNNs classify each patch independently ignoring the spatial correlations, resulting in wrong isolated label map. However, the probability distribution of cancer type is related to their adjacent patches. In this paper, we propose a framework integrating CNN and filter algorithm aimed at extracting spatial information and improving the performance of the classification. The network was trained on a breast cancer dataset provided by ICIAR18. For 4-class classification, compared to CNN methods without using spatial correlations, the proposed method achieved about 10% improvement on accuracy over the validation dataset and get smoother probability maps. Our experiments also show that larger kernel size gets better performance.

arXiv:2104.07789공식 코드 · Papers with Code

Detect and Classify -- Joint Span Detection and Classification for Health Outcomes

A health outcome is a measurement or an observation used to capture and assess the effect of a treatment. Automatic detection of health outcomes from text would undoubtedly speed up access to evidence necessary in healthcare decision making. Prior work on outcome detection has modelled this task as either (a) a sequence labelling task, where the goal is to detect which text spans describe health outcomes, or (b) a classification task, where the goal is to classify a text into a pre-defined set of categories depending on an outcome that is mentioned somewhere in that text. However, this decoupling of span detection and classification is problematic from a modelling perspective and ignores global structural correspondences between sentence-level and word-level information present in a given text. To address this, we propose a method that uses both word-level and sentence-level information to simultaneously perform outcome span detection and outcome type classification. In addition to injecting contextual information to hidden vectors, we use label attention to appropriately weight both word and sentence level information. Experimental results on several benchmark datasets for health outcome detection show that our proposed method consistently outperforms decoupled methods, reporting competitive results.

arXiv:2104.07367공식 코드 · Papers with Code

BERT based Transformers lead the way in Extraction of Health Information from Social Media

This paper describes our submissions for the Social Media Mining for Health (SMM4H)2021 shared tasks. We participated in 2 tasks:(1) Classification, extraction and normalization of adverse drug effect (ADE) mentions in English tweets (Task-1) and (2) Classification of COVID-19 tweets containing symptoms(Task-6). Our approach for the first task uses the language representation model RoBERTa with a binary classification head. For the second task, we use BERTweet, based on RoBERTa. Fine-tuning is performed on the pre-trained models for both tasks. The models are placed on top of a custom domain-specific processing pipeline. Our system ranked first among all the submissions for subtask-1(a) with an F1-score of 61%. For subtask-1(b), our system obtained an F1-score of 50% with improvements up to +8% F1 over the score averaged across all submissions. The BERTweet model achieved an F1 score of 94% on SMM4H 2021 Task-6.

arXiv:2104.07128

Audio feature ranking for sound-based COVID-19 patient detection

Audio classification using breath and cough samples has recently emerged as a low-cost, non-invasive, and accessible COVID-19 screening method. However, a comprehensive survey shows that no application has been approved for official use at the time of writing, due to the stringent reliability and accuracy requirements of the critical healthcare setting. To support the development of Machine Learning classification models, we performed an extensive comparative investigation and ranking of 15 audio features, including less well-known ones. The results were verified on two independent COVID-19 sound datasets. By using the identified top-performing features, we have increased COVID-19 classification accuracy by up to 17% on the Cambridge dataset and up to 10% on the Coswara dataset compared to the original baseline accuracies without our feature ranking.

arXiv:2104.07225공식 코드 · Papers with Code

Text Guide: Improving the quality of long text classification by a text selection method based on feature importance

The performance of text classification methods has improved greatly over the last decade for text instances of less than 512 tokens. This limit has been adopted by most state-of-the-research transformer models due to the high computational cost of analyzing longer text instances. To mitigate this problem and to improve classification for longer texts, researchers have sought to resolve the underlying causes of the computational cost and have proposed optimizations for the attention mechanism, which is the key element of every transformer model. In our study, we are not pursuing the ultimate goal of long text classification, i.e., the ability to analyze entire text instances at one time while preserving high performance at a reasonable computational cost. Instead, we propose a text truncation method called Text Guide, in which the original text length is reduced to a predefined limit in a manner that improves performance over naive and semi-naive approaches while preserving low computational costs. Text Guide benefits from the concept of feature importance, a notion from the explainable artificial intelligence domain. We demonstrate that Text Guide can be used to improve the performance of recent language models specifically designed for long text classification, such as Longformer. Moreover, we discovered that parameter optimization is the key to Text Guide performance and must be conducted before the method is deployed. Future experiments may reveal additional benefits provided by this new method.

arXiv:2005.05437

End-to-End Automatic Sleep Stage Classification Using Spectral-Temporal Sleep Features

Sleep disorder is one of many neurological diseases that can affect greatly the quality of daily life. It is very burdensome to manually classify the sleep stages to detect sleep disorders. Therefore, the automatic sleep stage classification techniques are needed. However, the previous automatic sleep scoring methods using raw signals are still low classification performance. In this study, we proposed an end-to-end automatic sleep staging framework based on optimal spectral-temporal sleep features using a sleep-edf dataset. The input data were modified using a bandpass filter and then applied to a convolutional neural network model. For five sleep stage classification, the classification performance 85.6% and 91.1% using the raw input data and the proposed input, respectively. This result also shows the highest performance compared to conventional studies using the same dataset. The proposed framework has shown high performance by using optimal features associated with each sleep stage, which may help to find new features in the automatic sleep stage method.

arXiv:2008.01667

Classification-Aided Multitarget Tracking Using the Sum-Product Algorithm

Multitarget tracking (MTT) is a challenging task that aims at estimating the number of targets and their states from measurements of the target states provided by one or multiple sensors. Additional information, such as imperfect estimates of target classes provided by a classifier, can facilitate the target-measurement association and thus improve MTT performance. In this letter, we describe how a recently proposed MTT framework based on the sum-product algorithm can be extended to efficiently exploit class information. The effectiveness of the proposed approach is demonstrated by simulation results.

arXiv:2009.04398

Data Augmentation for Electrocardiogram Classification with Deep Neural Network

Electrocardiogram (ECG) is the most crucial monitoring modality to diagnose cardiovascular events. Precise and automatic detection of abnormal ECG patterns is beneficial to both physicians and patients. In the automatic detection of abnormal ECG patterns, deep neural networks (DNNs) have shown significant achievements. However, DNNs require large amount of labeled data, which are often expensive to obtain. On the other hand, recent research have shown by randomly combining data augmentations can improve image classification accuracy. Thus, in this work we explore data augmentation suitable for ECG data and propose ECG Augment. We show by introducing ECG Augment, we can improve classification of atrial fibrillation with single lead ECG data, without changing an architecture of DNN.

arXiv:2009.02026

Learning Constellation Map with Deep CNN for Accurate Modulation Recognition

Modulation classification, recognized as the intermediate step between signal detection and demodulation, is widely deployed in several modern wireless communication systems. Although many approaches have been studied in the last decades for identifying the modulation format of an incoming signal, they often reveal the obstacle of learning radio characteristics for most traditional machine learning algorithms. To overcome this drawback, we propose an accurate modulation classification method by exploiting deep learning for being compatible with constellation diagram. Particularly, a convolutional neural network is developed for proficiently learning the most relevant radio characteristics of gray-scale constellation image. The deep network is specified by multiple processing blocks, where several grouped and asymmetric convolutional layers in each block are organized by a flow-in-flow structure for feature enrichment. These blocks are connected via skip-connection to prevent the vanishing gradient problem while effectively preserving the information identify throughout the network. Regarding several intensive simulations on the constellation image dataset of eight digital modulations, the proposed deep network achieves the remarkable classification accuracy of approximately 87% at 0 dB signal-to-noise ratio (SNR) under a multipath Rayleigh fading channel and further outperforms some state-of-the-art deep models of constellation-based modulation classification.

arXiv:2011.10377

Data-Driven Modulation and Antenna Classification of Wireless Digital Communication Signals

In this paper we are interested to learn from a wireless digitally modulated signal the number of antennas that the transmitter (Tx) of this signal uses, as well as its specific modulation scheme (from phase-shift keying (PSK) or quadrature amplitude modulation (QAM)). Formally, these are modulation and antenna classification problems. We examine the problems with data-driven machine learning (ML)-based techniques. The two sub-problems of modulation and number of transmitter antenna classification are initially examined independently for a variety for system parameters, namely the SNR, number of receiver (Rx) antennas, and classification algorithms. Then we consider the joint problem where we follow two approaches. One, where the sub-problems are solved independently and in parallel, and one where the antenna classifier waits on the result of the modulation classifier. The two proposed schemes do not require any knowledge/details of the used modulation schemes and the way the Tx antennas are used (spatial multiplexing, space-time codes,etc.) as it is fully data-driven and not decision-theoretic based. The results of our approach are characterized by high classification accuracy and they pave the way for more ML-based data-driven techniques that reveal more characteristics of the Tx.

arXiv:2012.06782

Light-Weight 1-D Convolutional Neural Network Architecture for Mental Task Identification and Classification Based on Single-Channel EEG

Mental task identification and classification using single/limited channel(s) electroencephalogram (EEG) signals in real-time play an important role in the design of portable brain-computer interface (BCI) and neurofeedback (NFB) systems. However, the real-time recorded EEG signals are often contaminated with noises such as ocular artifacts (OAs) and muscle artifacts (MAs), which deteriorate the hand-crafted features extracted from EEG signal, resulting inadequate identification and classification of mental tasks. Therefore, we investigate the use of recent deep learning techniques which do not require any manual feature extraction or artifact suppression step. In this paper, we propose a light-weight one-dimensional convolutional neural network (1D-CNN) architecture for mental task identification and classification. The robustness of the proposed architecture is evaluated using artifact-free and artifact-contaminated EEG signals taken from two publicly available databases (i.e, Keirn and Aunon ($K$) database and EEGMAT ($E$) database) and in-house ($R$) database recorded using single-channel neurosky mindwave mobile 2 (MWM2) EEG headset in performing not only mental/non-mental binary task classification but also different mental/mental multi-tasks classification. Evaluation results demonstrate that the proposed architecture achieves the highest subject-independent classification accuracy of $99.7\%$ and $100\%$ for multi-class classification and pair-wise mental tasks classification respectively in database $K$. Further, the proposed architecture achieves subject-independent classification accuracy of $99\%$ and $98\%$ in database $E$ and the recorded database $R$ respectively. Comparative performance analysis demonstrates that the proposed architecture outperforms existing approaches not only in terms of classification accuracy but also in robustness against artifacts.

arXiv:2011.13663

Drone classification from RF fingerprints using deep residual nets

Detecting UAVs is becoming more crucial for various industries such as airports and nuclear power plants for improving surveillance and security measures. Exploiting radio frequency (RF) based drone control and communication enables a passive way of drone detection for a wide range of environments and even without favourable line of sight (LOS) conditions. In this paper, we evaluate RF based drone classification performance of various state-of-the-art (SoA) models on a new realistic drone RF dataset. With the help of a newly proposed residual Convolutional Neural Network (CNN) model, we show that the drone RF frequency signatures can be used for effective classification. The robustness of the classifier is evaluated in a multipath environment considering varying Doppler frequencies that may be introduced from a flying drone. We also show that the model achieves better generalization capabilities under different wireless channel and drone speed scenarios. Furthermore, the newly proposed model's classification performance is evaluated on a simultaneous multi-drone scenario. The classifier achieves close to 99 % classification accuracy for signal-to-noise ratio (SNR) 0 dB and at -10 dB SNR it obtains 5 % better classification accuracy compared to the existing framework.

arXiv:2101.01239

Explainable Neural Network-based Modulation Classification via Concept Bottleneck Models

While RFML is expected to be a key enabler of future wireless standards, a significant challenge to the widespread adoption of RFML techniques is the lack of explainability in deep learning models. This work investigates the use of CB models as a means to provide inherent decision explanations in the context of DL-based AMC. Results show that the proposed approach not only meets the performance of single-network DL-based AMC algorithms, but provides the desired model explainability and shows potential for classifying modulation schemes not seen during training (i.e. zero-shot learning).

arXiv:2101.00647

In-Ear SpO2 for Classification of Cognitive Workload

Classification of cognitive workload promises immense benefit in diverse areas ranging from driver safety to augmenting human capability through closed loop brain computer interface. The brain is the most metabolically active organ in the body and increases its metabolic activity and thus oxygen consumption with increasing cognitive demand. In this study, we explore the feasibility of in-ear SpO2 cognitive workload tracking. To this end, we preform cognitive workload assessment in 8 subjects, based on an N-back task, whereby the subjects are asked to count and remember the number of odd numbers displayed on a screen in 5 second windows. The 2 and 3-back tasks lead to either the lowest median absolute SpO2 or largest median decrease in SpO2 in all of the subjects, indicating a robust and measurable decrease in blood oxygen in response to increased cognitive workload. Using features derived from in-ear pulse oximetry, including SpO2, pulse rate and respiration rate, we were able to classify the 4 N-back task categories, over 5 second epochs, with a mean accuracy of 94.2%. Moreover, out of 21 total features, the 9 most important features for classification accuracy were all SpO2 related features. The findings suggest that in-ear SpO2 measurements provide valuable information for classification of cognitive workload over short time windows, which together with the small form factor promises a new avenue for real time cognitive workload tracking.

arXiv:2101.11670

Bounds on mutual information of mixture data for classification tasks

The data for many classification problems, such as pattern and speech recognition, follow mixture distributions. To quantify the optimum performance for classification tasks, the Shannon mutual information is a natural information-theoretic metric, as it is directly related to the probability of error. The mutual information between mixture data and the class label does not have an analytical expression, nor any efficient computational algorithms. We introduce a variational upper bound, a lower bound, and three estimators, all employing pair-wise divergences between mixture components. We compare the new bounds and estimators with Monte Carlo stochastic sampling and bounds derived from entropy bounds. To conclude, we evaluate the performance of the bounds and estimators through numerical simulations.

arXiv:2103.01677

SimHumalator: An Open Source WiFi Based Passive Radar Human Simulator For Activity Recognition

This work presents a simulation framework to generate human micro-Dopplers in WiFi based passive radar scenarios, wherein we simulate IEEE 802.11g complaint WiFi transmissions using MATLAB's WLAN toolbox and human animation models derived from a marker-based motion capture system. We integrate WiFi transmission signals with the human animation data to generate the micro-Doppler features that incorporate the diversity of human motion characteristics, and the sensor parameters. In this paper, we consider five human activities. We uniformly benchmark the classification performance of multiple machine learning and deep learning models against a common dataset. Further, we validate the classification performance using the real radar data captured simultaneously with the motion capture system. We present experimental results using simulations and measurements demonstrating good classification accuracy of $\geq$ 95\% and $\approx$ 90\%, respectively.

arXiv:2104.06750공식 코드 · Papers with Code

Quadratic GCN for Graph Classification

Graph Convolutional Networks (GCNs) have been extensively used to classify vertices in graphs and have been shown to outperform other vertex classification methods. GCNs have been extended to graph classification tasks (GCT). In GCT, graphs with different numbers of edges and vertices belong to different classes, and one attempts to predict the graph class. GCN based GCT have mostly used pooling and attention-based models. The accuracy of existing GCT methods is still limited. We here propose a novel solution combining GCN, methods from knowledge graphs, and a new self-regularized activation function to significantly improve the accuracy of the GCN based GCT. We present quadratic GCN (QGCN) - A GCN formalism with a quadratic layer. Such a layer produces an output with fixed dimensions, independent of the graph vertex number. We applied this method to a wide range of graph classification problems, and show that when using a self regularized activation function, QGCN outperforms the state of the art methods for all graph classification tasks tested with or without external input on each graph. The code for QGCN is available at: https://github.com/Unknown-Data/QGCN .

arXiv:2104.06313

SetConv: A New Approach for Learning from Imbalanced Data

For many real-world classification problems, e.g., sentiment classification, most existing machine learning methods are biased towards the majority class when the Imbalance Ratio (IR) is high. To address this problem, we propose a set convolution (SetConv) operation and an episodic training strategy to extract a single representative for each class, so that classifiers can later be trained on a balanced class distribution. We prove that our proposed algorithm is permutation-invariant despite the order of inputs, and experiments on multiple large-scale benchmark text datasets show the superiority of our proposed framework when compared to other SOTA methods.