PyTorchKR Papers

최신 논문

총 670편
태그·기간 등 상세 필터

카테고리 탐색

로그인 후 이 태그 구독

arXiv:2001.06479

Unsupervised Learning of Camera Pose with Compositional Re-estimation

We consider the problem of unsupervised camera pose estimation. Given an input video sequence, our goal is to estimate the camera pose (i.e. the camera motion) between consecutive frames. Traditionally, this problem is tackled by placing strict constraints on the transformation vector or by incorporating optical flow through a complex pipeline. We propose an alternative approach that utilizes a compositional re-estimation process for camera pose estimation. Given an input, we first estimate a depth map. Our method then iteratively estimates the camera motion based on the estimated depth map. Our approach significantly improves the predicted camera motion both quantitatively and visually. Furthermore, the re-estimation resolves the problem of out-of-boundaries pixels in a novel and simple way. Another advantage of our approach is that it is adaptable to other camera pose estimation approaches. Experimental analysis on KITTI benchmark dataset demonstrates that our method outperforms existing state-of-the-art approaches in unsupervised camera ego-motion estimation.

arXiv:2001.03801

Dynamic Coronary Roadmapping via Catheter Tip Tracking in X-ray Fluoroscopy with Deep Learning Based Bayesian Filtering

Percutaneous coronary intervention (PCI) is typically performed with image guidance using X-ray angiograms in which coronary arteries are opacified with X-ray opaque contrast agents. Interventional cardiologists typically navigate instruments using non-contrast-enhanced fluoroscopic images, since higher use of contrast agents increases the risk of kidney failure. When using fluoroscopic images, the interventional cardiologist needs to rely on a mental anatomical reconstruction. This paper reports on the development of a novel dynamic coronary roadmapping approach for improving visual feedback and reducing contrast use during PCI. The approach compensates cardiac and respiratory induced vessel motion by ECG alignment and catheter tip tracking in X-ray fluoroscopy, respectively. In particular, for accurate and robust tracking of the catheter tip, we proposed a new deep learning based Bayesian filtering method that integrates the detection outcome of a convolutional neural network and the motion estimation between frames using a particle filtering framework. The proposed roadmapping and tracking approaches were validated on clinical X-ray images, achieving accurate performance on both catheter tip tracking and dynamic coronary roadmapping experiments. In addition, our approach runs in real-time on a computer with a single GPU and has the potential to be integrated into the clinical workflow of PCI procedures, providing cardiologists with visual guidance during interventions without the need of extra use of contrast agent.

arXiv:2001.02606

Do As I Do: Transferring Human Motion and Appearance between Monocular Videos with Spatial and Temporal Constraints

Creating plausible virtual actors from images of real actors remains one of the key challenges in computer vision and computer graphics. Marker-less human motion estimation and shape modeling from images in the wild bring this challenge to the fore. Although the recent advances on view synthesis and image-to-image translation, currently available formulations are limited to transfer solely style and do not take into account the character's motion and shape, which are by nature intermingled to produce plausible human forms. In this paper, we propose a unifying formulation for transferring appearance and retargeting human motion from monocular videos that regards all these aspects. Our method synthesizes new videos of people in a different context where they were initially recorded. Differently from recent appearance transferring methods, our approach takes into account body shape, appearance, and motion constraints. The evaluation is performed with several experiments using publicly available real videos containing hard conditions. Our method is able to transfer both human motion and appearance outperforming state-of-the-art methods, while preserving specific features of the motion that must be maintained (e.g., feet touching the floor, hands touching a particular object) and holding the best visual quality and appearance metrics such as Structural Similarity (SSIM) and Learned Perceptual Image Patch Similarity (LPIPS).

arXiv:2001.01162

End-To-End Trainable Video Super-Resolution Based on a New Mechanism for Implicit Motion Estimation and Compensation

Video super-resolution aims at generating a high-resolution video from its low-resolution counterpart. With the rapid rise of deep learning, many recently proposed video super-resolution methods use convolutional neural networks in conjunction with explicit motion compensation to capitalize on statistical dependencies within and across low-resolution frames. Two common issues of such methods are noteworthy. Firstly, the quality of the final reconstructed HR video is often very sensitive to the accuracy of motion estimation. Secondly, the warp grid needed for motion compensation, which is specified by the two flow maps delineating pixel displacements in horizontal and vertical directions, tends to introduce additional errors and jeopardize the temporal consistency across video frames. To address these issues, we propose a novel dynamic local filter network to perform implicit motion estimation and compensation by employing, via locally connected layers, sample-specific and position-specific dynamic local filters that are tailored to the target pixels. We also propose a global refinement network based on ResBlock and autoencoder structures to exploit non-local correlations and enhance the spatial consistency of super-resolved frames. The experimental results demonstrate that the proposed method outperforms the state-of-the-art, and validate its strength in terms of local transformation handling, temporal consistency as well as edge sharpness.

arXiv:1912.10776

Minimal Solutions for Relative Pose with a Single Affine Correspondence

In this paper we present four cases of minimal solutions for two-view relative pose estimation by exploiting the affine transformation between feature points and we demonstrate efficient solvers for these cases. It is shown, that under the planar motion assumption or with knowledge of a vertical direction, a single affine correspondence is sufficient to recover the relative camera pose. The four cases considered are two-view planar relative motion for calibrated cameras as a closed-form and a least-squares solution, a closed-form solution for unknown focal length and the case of a known vertical direction. These algorithms can be used efficiently for outlier detection within a RANSAC loop and for initial motion estimation. All the methods are evaluated on both synthetic data and real-world datasets from the KITTI benchmark. The experimental results demonstrate that our methods outperform comparable state-of-the-art methods in accuracy with the benefit of a reduced number of needed RANSAC iterations.

arXiv:1912.10293

Joint Forward-Backward Visual Odometry for Stereo Cameras

Visual odometry is a widely used technique in the field of robotics and automation to keep a track on the location of a robot using visual cues alone. In this paper, we propose a joint forward backward visual odometry framework by combining both, the forward motion and backward motion estimated from stereo cameras. The basic framework of LIBVIOS2 is used here for pose estimation as it can run in real-time on standard CPUs. The complementary nature of errors in the forward and backward mode of visual odometry helps in providing a refined motion estimation upon combining these individual estimates. In addition, two reliability measures, that is, forward-backward relative pose error and forward-backward absolute pose error have been proposed for evaluating visual odometry frameworks on its own without the requirement of any ground truth data. The proposed scheme is evaluated on the KITTI visual odometry dataset. The experimental results demonstrate improved accuracy of the proposed scheme over the traditional odometry pipeline without much increase in the system overload.

arXiv:1912.09351공식 코드 · Papers with Code

Instance-wise Depth and Motion Learning from Monocular Videos

We present an end-to-end joint training framework that explicitly models 6-DoF motion of multiple dynamic objects, ego-motion and depth in a monocular camera setup without supervision. Our technical contributions are three-fold. First, we propose a differentiable forward rigid projection module that plays a key role in our instance-wise depth and motion learning. Second, we design an instance-wise photometric and geometric consistency loss that effectively decomposes background and moving object regions. Lastly, we introduce a new auto-annotation scheme to produce video instance segmentation maps that will be utilized as input to our training pipeline. These proposed elements are validated in a detailed ablation study. Through extensive experiments conducted on the KITTI dataset, our framework is shown to outperform the state-of-the-art depth and motion estimation methods. Our code and dataset will be available at https://github.com/SeokjuLee/Insta-DM.

arXiv:1912.05193공식 코드 · Papers with Code

Deep motion estimation for parallel inter-frame prediction in video compression

Standard video codecs rely on optical flow to guide inter-frame prediction: pixels from reference frames are moved via motion vectors to predict target video frames. We propose to learn binary motion codes that are encoded based on an input video sequence. These codes are not limited to 2D translations, but can capture complex motion (warping, rotation and occlusion). Our motion codes are learned as part of a single neural network which also learns to compress and decode them. This approach supports parallel video frame decoding instead of the sequential motion estimation and compensation of flow-based methods. We also introduce 3D dynamic bit assignment to adapt to object displacements caused by motion, yielding additional bit savings. By replacing the optical flow-based block-motion algorithms found in an existing video codec with our learned inter-frame prediction model, our approach outperforms the standard H.264 and H.265 video codecs across at low bitrates.

arXiv:1912.03426공식 코드 · Papers with Code

Self-Supervised 3D Keypoint Learning for Ego-motion Estimation

Detecting and matching robust viewpoint-invariant keypoints is critical for visual SLAM and Structure-from-Motion. State-of-the-art learning-based methods generate training samples via homography adaptation to create 2D synthetic views with known keypoint matches from a single image. This approach, however, does not generalize to non-planar 3D scenes with illumination variations commonly seen in real-world videos. In this work, we propose self-supervised learning of depth-aware keypoints directly from unlabeled videos. We jointly learn keypoint and depth estimation networks by combining appearance and geometric matching via a differentiable structure-from-motion module based on Procrustean residual pose correction. We describe how our self-supervised keypoints can be integrated into state-of-the-art visual odometry frameworks for robust and accurate ego-motion estimation of autonomous vehicles in real-world conditions.

arXiv:1911.13162

Deep autofocus with cone-beam CT consistency constraint

High quality reconstruction with interventional C-arm cone-beam computed tomography (CBCT) requires exact geometry information. If the geometry information is corrupted, e. g., by unexpected patient or system movement, the measured signal is misplaced in the backprojection operation. With prolonged acquisition times of interventional C-arm CBCT the likelihood of rigid patient motion increases. To adapt the backprojection operation accordingly, a motion estimation strategy is necessary. Recently, a novel learning-based approach was proposed, capable of compensating motions within the acquisition plane. We extend this method by a CBCT consistency constraint, which was proven to be efficient for motions perpendicular to the acquisition plane. By the synergistic combination of these two measures, in and out-plane motion is well detectable, achieving an average artifact suppression of 93 [percent]. This outperforms the entropy-based state-of-the-art autofocus measure which achieves on average an artifact suppression of 54 [percent].

arXiv:1910.14594

Deep Learning for 2D and 3D Rotatable Data: An Overview of Methods

Convolutional networks are successful due to their equivariance/invariance under translations. However, rotatable data such as images, volumes, shapes, or point clouds require processing with equivariance/invariance under rotations in cases where the rotational orientation of the coordinate system does not affect the meaning of the data (e.g. object classification). On the other hand, estimation/processing of rotations is necessary in cases where rotations are important (e.g. motion estimation). There has been recent progress in methods and theory in all these regards. Here we provide an overview of existing methods, both for 2D and 3D rotations (and translations), and identify commonalities and links between them.

arXiv:1910.06840

A Hybrid Compact Neural Architecture for Visual Place Recognition

State-of-the-art algorithms for visual place recognition, and related visual navigation systems, can be broadly split into two categories: computer-science-oriented models including deep learning or image retrieval-based techniques with minimal biological plausibility, and neuroscience-oriented dynamical networks that model temporal properties underlying spatial navigation in the brain. In this letter, we propose a new compact and high-performing place recognition model that bridges this divide for the first time. Our approach comprises two key neural models of these categories: (1) FlyNet, a compact, sparse two-layer neural network inspired by brain architectures of fruit flies, Drosophila melanogaster, and (2) a one-dimensional continuous attractor neural network (CANN). The resulting FlyNet+CANN network incorporates the compact pattern recognition capabilities of our FlyNet model with the powerful temporal filtering capabilities of an equally compact CANN, replicating entirely in a hybrid neural implementation the functionality that yields high performance in algorithmic localization approaches like SeqSLAM. We evaluate our model, and compare it to three state-of-the-art methods, on two benchmark real-world datasets with small viewpoint variations and extreme environmental changes - achieving 87% AUC results under day to night transitions compared to 60% for Multi-Process Fusion, 46% for LoST-X and 1% for SeqSLAM, while being 6.5, 310, and 1.5 times faster, respectively.

arXiv:1910.04254

Image Quality Assessment for Rigid Motion Compensation

Diagnostic stroke imaging with C-arm cone-beam computed tomography (CBCT) enables reduction of time-to-therapy for endovascular procedures. However, the prolonged acquisition time compared to helical CT increases the likelihood of rigid patient motion. Rigid motion corrupts the geometry alignment assumed during reconstruction, resulting in image blurring or streaking artifacts. To reestablish the geometry, we estimate the motion trajectory by an autofocus method guided by a neural network, which was trained to regress the reprojection error, based on the image information of a reconstructed slice. The network was trained with CBCT scans from 19 patients and evaluated using an additional test patient. It adapts well to unseen motion amplitudes and achieves superior results in a motion estimation benchmark compared to the commonly used entropy-based method.

arXiv:1910.04668

AlignNet-3D: Fast Point Cloud Registration of Partially Observed Objects

Methods tackling multi-object tracking need to estimate the number of targets in the sensing area as well as to estimate their continuous state. While the majority of existing methods focus on data association, precise state (3D pose) estimation is often only coarsely estimated by approximating targets with centroids or (3D) bounding boxes. However, in automotive scenarios, motion perception of surrounding agents is critical and inaccuracies in the vehicle close-range can have catastrophic consequences. In this work, we focus on precise 3D track state estimation and propose a learning-based approach for object-centric relative motion estimation of partially observed objects. Instead of approximating targets with their centroids, our approach is capable of utilizing noisy 3D point segments of objects to estimate their motion. To that end, we propose a simple, yet effective and efficient network, \method, that learns to align point clouds. Our evaluation on two different datasets demonstrates that our method outperforms computationally expensive, global 3D registration methods while being significantly more efficient. We make our data, code, and models available at https://www.vision.rwth-aachen.de/page/alignnet.

arXiv:1910.01764

Two Stream Networks for Self-Supervised Ego-Motion Estimation

Learning depth and camera ego-motion from raw unlabeled RGB video streams is seeing exciting progress through self-supervision from strong geometric cues. To leverage not only appearance but also scene geometry, we propose a novel self-supervised two-stream network using RGB and inferred depth information for accurate visual odometry. In addition, we introduce a sparsity-inducing data augmentation policy for ego-motion learning that effectively regularizes the pose network to enable stronger generalization performance. As a result, we show that our proposed two-stream pose network achieves state-of-the-art results among learning-based methods on the KITTI odometry benchmark, and is especially suited for self-supervision at scale. Our experiments on a large-scale urban driving dataset of 1 million frames indicate that the performance of our proposed architecture does indeed scale progressively with more data.

arXiv:1910.01681

1-point RANSAC for Circular Motion Estimation in Computed Tomography (CT)

This paper proposes a RANSAC-based algorithm for determining the axial rotation angle of an object from a pair of its tomographic projections. An equation is derived for calculating the rotation angle using one correct keypoints correspondence of two tomographic projections. The proposed algorithm consists of the following steps: keypoints detection and matching, rotation angle estimation for each correspondence, outliers filtering with the RANSAC algorithm, finally, calculation of the desired angle by minimizing the re-projection error from the remaining correspondences. To validate the proposed method an experimental comparison against methods based on analysis of the distribution of the angles computed from all correspondences is conducted.

arXiv:1909.13730공식 코드 · Papers with Code

X-ray and Visible Spectra Circular Motion Images Dataset

We present the collections of images of the same rotating plastic object made in X-ray and visible spectra. Both parts of the dataset contain 400 images. The images are maid every 0.5 degrees of the object axial rotation. The collection of images is designed for evaluation of the performance of circular motion estimation algorithms as well as for the study of X-ray nature influence on the image analysis algorithms such as keypoints detection and description. The dataset is available at https://github.com/Visillect/xvcm-dataset.

arXiv:1909.11362

Robust Monocular Edge Visual Odometry through Coarse-to-Fine Data Association

In this work, we propose a monocular visual odometry framework, which allows exploiting the best attributes of edge feature for illumination-robust camera tracking, while at the same time ameliorating the performance degradation of edge mapping. In the front-end, an ICP-based edge registration can provide robust motion estimation and coarse data association under lighting changes. In the back-end, a novel edge-guided data association pipeline searches for the best photometrically matched points along geometrically possible edges through template matching, so that the matches can be further refined in later bundle adjustment. The core of our proposed data association strategy lies in a point-to-edge geometric uncertainty analysis, which analytically derives (1) the probabilistic search length formula that significantly reduces the search space for system speed-up and (2) the geometrical confidence metric for mapping degradation detection based on the predicted depth uncertainty. Moreover, match confidence based patch size adaption strategy is integrated into our pipeline, connecting with other components, to reduce the matching ambiguity. We present extensive analysis and evaluation of our proposed system on synthetic and real-world benchmark datasets under the influence of illumination changes and large camera motions, where our proposed system outperforms current state-of-art algorithms.

arXiv:1909.08792

Agent Prioritization for Autonomous Navigation

In autonomous navigation, a planning system reasons about other agents to plan a safe and plausible trajectory. Before planning starts, agents are typically processed with computationally intensive models for recognition, tracking, motion estimation and prediction. With limited computational resources and a large number of agents to process in real time, it becomes important to efficiently rank agents according to their impact on the decision making process. This allows spending more time processing the most important agents. We propose a system to rank agents around an autonomous vehicle (AV) in real time. We automatically generate a ranking data set by running the planner in simulation on real-world logged data, where we can afford to run more accurate and expensive models on all the agents. The causes of various planner actions are logged and used for assigning ground truth importance scores. The generated data set can be used to learn ranking models. In particular, we show the utility of combining learned features, via a convolutional neural network, with engineered features designed to capture domain knowledge. We show the benefits of various design choices experimentally. When tested on real AVs, our system demonstrates the capability of understanding complex driving situations.

arXiv:1909.06999

Learning Residual Flow as Dynamic Motion from Stereo Videos

We present a method for decomposing the 3D scene flow observed from a moving stereo rig into stationary scene elements and dynamic object motion. Our unsupervised learning framework jointly reasons about the camera motion, optical flow, and 3D motion of moving objects. Three cooperating networks predict stereo matching, camera motion, and residual flow, which represents the flow component due to object motion and not from camera motion. Based on rigid projective geometry, the estimated stereo depth is used to guide the camera motion estimation, and the depth and camera motion are used to guide the residual flow estimation. We also explicitly estimate the 3D scene flow of dynamic objects based on the residual flow and scene depth. Experiments on the KITTI dataset demonstrate the effectiveness of our approach and show that our method outperforms other state-of-the-art algorithms on the optical flow and visual odometry tasks.