The measurement rate of cameras that take spatially multiplexed measurements by using spatial light modulators (SLM) is often limited by the switching speed of the SLMs. This is especially true for single-pixel cameras where the photodetector operates at a rate that is many orders-of-magnitude greater than the SLM. We study the factors that determine the measurement rate for such spatial multiplexing cameras (SMC) and show that increasing the number of pixels in the device improves the measurement rate, but there is an optimum number of pixels (typically, few thousands) beyond which the measurement rate does not increase. This motivates the design of LiSens, a novel imaging architecture, that replaces the photodetector in the single-pixel camera with a 1D linear array or a line-sensor. We illustrate the optical architecture underlying LiSens, build a prototype, and demonstrate results of a range of indoor and outdoor scenes. LiSens delivers on the promise of SMCs: imaging at a megapixel resolution, at video rate, using an inexpensive low-resolution sensor.
This paper presents modification of the TwIST algorithm for Compressive Sensing MRI images reconstruction. Compressive Sensing is new approach in signal processing whose basic idea is recovering signal form small set of available samples. The application of the Compressive Sensing in biomedical imaging has found great importance. It allows significant lowering of the acquisition time, and therefore, save the patient from the negative impact of the MR apparatus. TwIST is commonly used algorithm for 2D signals reconstruction using Compressive Sensing principle. It is based on the Total Variation minimization. Standard version of the TwIST uses masked 2D Discrete Fourier Transform coefficients as Compressive Sensing measurements. In this paper, different masks and different transformation domains for coefficients selection are tested. Certain percent of the measurements is used from the mask, as well as small number of coefficients outside the mask. Comparative analysis using 2D DFT and 2D DCT coefficients, with different mask shapes is performed. The theory is proved with experimental results.
The application of compressive sensing (CS) to structural health monitoring is an emerging research topic. The basic idea in CS is to use a specially-designed wireless sensor to sample signals that are sparse in some basis (e.g. wavelet basis) directly in a compressed form, and then to reconstruct (decompress) these signals accurately using some inversion algorithm after transmission to a central processing unit. However, most signals in structural health monitoring are only approximately sparse, i.e. only a relatively small number of the signal coefficients in some basis are significant, but the other coefficients are usually not exactly zero. In this case, perfect reconstruction from compressed measurements is not expected. A new Bayesian CS algorithm is proposed in which robust treatment of the uncertain parameters is explored, including integration over the prediction-error precision parameter to remove it as a "nuisance" parameter. The performance of the new CS algorithm is investigated using compressed data from accelerometers installed on a space-frame structure and on a cable-stayed bridge. Compared with other state-of-the-art CS methods including our previously-published Bayesian method which uses MAP (maximum a posteriori) estimation of the prediction-error precision parameter, the new algorithm shows superior performance in reconstruction robustness and posterior uncertainty quantification. Furthermore, our method can be utilized for recovery of lost data during wireless transmission, regardless of the level of sparseness in the signal.
Cameras for imaging in short and mid-wave infrared spectra are significantly more expensive than their counterparts in visible imaging. As a result, high-resolution imaging in those spectrum remains beyond the reach of most consumers. Over the last decade, compressive sensing (CS) has emerged as a potential means to realize inexpensive short-wave infrared cameras. One approach for doing this is the single-pixel camera (SPC) where a single detector acquires coded measurements of a high-resolution image. A computational reconstruction algorithm is then used to recover the image from these coded measurements. Unfortunately, the measurement rate of a SPC is insufficient to enable imaging at high spatial and temporal resolutions. We present a focal plane array-based compressive sensing (FPA-CS) architecture that achieves high spatial and temporal resolutions. The idea is to use an array of SPCs that sense in parallel to increase the measurement rate, and consequently, the achievable spatio-temporal resolution of the camera. We develop a proof-of-concept prototype in the short-wave infrared using a sensor with 64$\times$ 64 pixels; the prototype provides a 4096$\times$ increase in the measurement rate compared to the SPC and achieves a megapixel resolution at video rate using CS techniques.
In this paper, we propose a novel algorithm for analysis-based sparsity reconstruction. It can solve the generalized problem by structured sparsity regularization with an orthogonal basis and total variation regularization. The proposed algorithm is based on the iterative reweighted least squares (IRLS) model, which is further accelerated by the preconditioned conjugate gradient method. The convergence rate of the proposed algorithm is almost the same as that of the traditional IRLS algorithms, that is, exponentially fast. Moreover, with the specifically devised preconditioner, the computational cost for each iteration is significantly less than that of traditional IRLS algorithms, which enables our approach to handle large scale problems. In addition to the fast convergence, it is straightforward to apply our method to standard sparsity, group sparsity, overlapping group sparsity and TV based problems. Experiments are conducted on a practical application: compressive sensing magnetic resonance imaging. Extensive results demonstrate that the proposed algorithm achieves superior performance over 14 state-of-the-art algorithms in terms of both accuracy and computational cost.
Existing works based on latent factor models have focused on representing the rating matrix as a product of user and item latent factor matrices, both being dense. Latent (factor) vectors define the degree to which a trait is possessed by an item or the affinity of user towards that trait. A dense user matrix is a reasonable assumption as each user will like/dislike a trait to certain extent. However, any item will possess only a few of the attributes and never all. Hence, the item matrix should ideally have a sparse structure rather than a dense one as formulated in earlier works. Therefore we propose to factor the ratings matrix into a dense user matrix and a sparse item matrix which leads us to the Blind Compressed Sensing (BCS) framework. We derive an efficient algorithm for solving the BCS problem based on Majorization Minimization (MM) technique. Our proposed approach is able to achieve significantly higher accuracy and shorter run times as compared to existing approaches.
Tucker decomposition is the cornerstone of modern machine learning on tensorial data analysis, which have attracted considerable attention for multiway feature extraction, compressive sensing, and tensor completion. The most challenging problem is related to determination of model complexity (i.e., multilinear rank), especially when noise and missing data are present. In addition, existing methods cannot take into account uncertainty information of latent factors, resulting in low generalization performance. To address these issues, we present a class of probabilistic generative Tucker models for tensor decomposition and completion with structural sparsity over multilinear latent space. To exploit structural sparse modeling, we introduce two group sparsity inducing priors by hierarchial representation of Laplace and Student-t distributions, which facilitates fully posterior inference. For model learning, we derived variational Bayesian inferences over all model (hyper)parameters, and developed efficient and scalable algorithms based on multilinear operations. Our methods can automatically adapt model complexity and infer an optimal multilinear rank by the principle of maximum lower bound of model evidence. Experimental results and comparisons on synthetic, chemometrics and neuroimaging data demonstrate remarkable performance of our models for recovering ground-truth of multilinear rank and missing entries.
Compressive sensing (CS) exploits sparsity to recover sparse or compressible signals from dimensionality reducing, non-adaptive sensing mechanisms. Sparsity is also used to enhance interpretability in machine learning and statistics applications: While the ambient dimension is vast in modern data analysis problems, the relevant information therein typically resides in a much lower dimensional space. However, many solutions proposed nowadays do not leverage the true underlying structure. Recent results in CS extend the simple sparsity idea to more sophisticated {\em structured} sparsity models, which describe the interdependency between the nonzero components of a signal, allowing to increase the interpretability of the results and lead to better recovery performance. In order to better understand the impact of structured sparsity, in this chapter we analyze the connections between the discrete models and their convex relaxations, highlighting their relative advantages. We start with the general group sparse model and then elaborate on two important special cases: the dispersive and the hierarchical models. For each, we present the models in their discrete nature, discuss how to solve the ensuing discrete problems and then describe convex relaxations. We also consider more general structures as defined by set functions and present their convex proxies. Further, we discuss efficient optimization solutions for structured sparsity problems and illustrate structured sparsity in action via three applications.
Compressive sensing has been successfully used for optimized operations in wireless sensor networks. However, raw data collected by sensors may be neither originally sparse nor easily transformed into a sparse data representation. This paper addresses the problem of transforming source data collected by sensor nodes into a sparse representation with a few nonzero elements. Our contributions that address three major issues include: 1) an effective method that extracts population sparsity of the data, 2) a sparsity ratio guarantee scheme, and 3) a customized learning algorithm of the sparsifying dictionary. We introduce an unsupervised neural network to extract an intrinsic sparse coding of the data. The sparse codes are generated at the activation of the hidden layer using a sparsity nomination constraint and a shrinking mechanism. Our analysis using real data samples shows that the proposed method outperforms conventional sparsity-inducing methods.
Spatial multiplexing cameras (SMCs) acquire a (typically static) scene through a series of coded projections using a spatial light modulator (e.g., a digital micro-mirror device) and a few optical sensors. This approach finds use in imaging applications where full-frame sensors are either too expensive (e.g., for short-wave infrared wavelengths) or unavailable. Existing SMC systems reconstruct static scenes using techniques from compressive sensing (CS). For videos, however, existing acquisition and recovery methods deliver poor quality. In this paper, we propose the CS multi-scale video (CS-MUVI) sensing and recovery framework for high-quality video acquisition and recovery using SMCs. Our framework features novel sensing matrices that enable the efficient computation of a low-resolution video preview, while enabling high-resolution video recovery using convex optimization. To further improve the quality of the reconstructed videos, we extract optical-flow estimates from the low-resolution previews and impose them as constraints in the recovery procedure. We demonstrate the efficacy of our CS-MUVI framework for a host of synthetic and real measured SMC video data, and we show that high-quality videos can be recovered at roughly $60\times$ compression.
In this paper, we develop a new framework for sensing and recovering structured signals. In contrast to compressive sensing (CS) systems that employ linear measurements, sparse representations, and computationally complex convex/greedy algorithms, we introduce a deep learning framework that supports both linear and mildly nonlinear measurements, that learns a structured representation from training data, and that efficiently computes a signal estimate. In particular, we apply a stacked denoising autoencoder (SDA), as an unsupervised feature learner. SDA enables us to capture statistical dependencies between the different elements of certain signals and improve signal recovery performance as compared to the CS approach.
We develop a new compressive sensing (CS) inversion algorithm by utilizing the Gaussian mixture model (GMM). While the compressive sensing is performed globally on the entire image as implemented in our lensless camera, a low-rank GMM is imposed on the local image patches. This low-rank GMM is derived via eigenvalue thresholding of the GMM trained on the projection of the measurement data, thus learned {\em in situ}. The GMM and the projection of the measurement data are updated iteratively during the reconstruction. Our GMM algorithm degrades to the piecewise linear estimator (PLE) if each patch is represented by a single Gaussian model. Inspired by this, a low-rank PLE algorithm is also developed for CS inversion, constituting an additional contribution of this paper. Extensive results on both simulation data and real data captured by the lensless camera demonstrate the efficacy of the proposed algorithm. Furthermore, we compare the CS reconstruction results using our algorithm with the JPEG compression. Simulation results demonstrate that when limited bandwidth is available (a small number of measurements), our algorithm can achieve comparable results as JPEG.
In this paper, we look to address the problem of estimating the dynamic direction of arrival (DOA) of a narrowband signal impinging on a sensor array from the far field. The initial estimate is made using a Bayesian compressive sensing (BCS) framework and then tracked using a Bayesian compressed sensing Kalman filter (BCSKF). The BCS framework splits the angular region into N potential DOAs and enforces a belief that only a few of the DOAs will have a non-zero valued signal present. A BCSKF can then be used to track the change in the DOA using the same framework. There can be an issue when the DOA approaches the endfire of the array. In this angular region current methods can struggle to accurately estimate and track changes in the DOAs. To tackle this problem, we propose changing the traditional sparse belief associated with BCS to a belief that the estimated signals will match the predicted signals given a known DOA change. This is done by modelling the difference between the expected sparse received signals and the estimated sparse received signals as a Gaussian distribution. Example test scenarios are provided and comparisons made with the traditional BCS based estimation method. They show that an improvement in estimation accuracy is possible without a significant increase in computational complexity.
In a plethora of applications dealing with inverse problems, e.g. in image processing, social networks, compressive sensing, biological data processing etc., the signal of interest is known to be structured in several ways at the same time. This premise has recently guided the research to the innovative and meaningful idea of imposing multiple constraints on the parameters involved in the problem under study. For instance, when dealing with problems whose parameters form sparse and low-rank matrices, the adoption of suitably combined constraints imposing sparsity and low-rankness, is expected to yield substantially enhanced estimation results. In this paper, we address the spectral unmixing problem in hyperspectral images. Specifically, two novel unmixing algorithms are introduced, in an attempt to exploit both spatial correlation and sparse representation of pixels lying in homogeneous regions of hyperspectral images. To this end, a novel convex mixed penalty term is first defined consisting of the sum of the weighted $\ell_1$ and the weighted nuclear norm of the abundance matrix corresponding to a small area of the image determined by a sliding square window. This penalty term is then used to regularize a conventional quadratic cost function and impose simultaneously sparsity and row-rankness on the abundance matrix. The resulting regularized cost function is minimized by a) an incremental proximal sparse and low-rank unmixing algorithm and b) an algorithm based on the alternating minimization method of multipliers (ADMM). The effectiveness of the proposed algorithms is illustrated in experiments conducted both on simulated and real data.
The nuclear norm is widely used as a convex surrogate of the rank function in compressive sensing for low rank matrix recovery with its applications in image recovery and signal processing. However, solving the nuclear norm based relaxed convex problem usually leads to a suboptimal solution of the original rank minimization problem. In this paper, we propose to perform a family of nonconvex surrogates of $L_0$-norm on the singular values of a matrix to approximate the rank function. This leads to a nonconvex nonsmooth minimization problem. Then we propose to solve the problem by Iteratively Reweighted Nuclear Norm (IRNN) algorithm. IRNN iteratively solves a Weighted Singular Value Thresholding (WSVT) problem, which has a closed form solution due to the special properties of the nonconvex surrogate functions. We also extend IRNN to solve the nonconvex problem with two or more blocks of variables. In theory, we prove that IRNN decreases the objective function value monotonically, and any limit point is a stationary point. Extensive experiments on both synthesized data and real images demonstrate that IRNN enhances the low-rank matrix recovery compared with state-of-the-art convex algorithms.
In this paper, we propose a new sampling strategy for hyperspectral signals that is based on dictionary learning and singular value decomposition (SVD). Specifically, we first learn a sparsifying dictionary from training spectral data using dictionary learning. We then perform an SVD on the dictionary and use the first few left singular vectors as the rows of the measurement matrix to obtain the compressive measurements for reconstruction. The proposed method provides significant improvement over the conventional compressive sensing approaches. The reconstruction performance is further improved by reconditioning the sensing matrix using matrix balancing. We also demonstrate that the combination of dictionary learning and SVD is robust by applying them to different datasets.
Magnetic Resonance Imaging (MRI) is a crucial medical imaging technology for the screening and diagnosis of frequently occurring cancers. However image quality may suffer by long acquisition times for MRIs due to patient motion, as well as result in great patient discomfort. Reducing MRI acquisition time can reduce patient discomfort and as a result reduces motion artifacts from the acquisition process. Compressive sensing strategies, when applied to MRI, have been demonstrated to be effective at decreasing acquisition times significantly by sparsely sampling the \emph{k}-space during the acquisition process. However, such a strategy requires advanced reconstruction algorithms to produce high quality and reliable images from compressive sensing MRI. This paper proposes a new reconstruction approach based on cross-domain stochastically fully connected conditional random fields (CD-SFCRF) for compressive sensing MRI. The CD-SFCRF introduces constraints in both \emph{k}-space and spatial domains within a stochastically fully connected graphical model to produce improved MRI reconstruction. Experimental results using T2-weighted (T2w) imaging and diffusion-weighted imaging (DWI) of the prostate show strong performance in preserving fine details and tissue structures in the reconstructed images when compared to other tested methods even at low sampling rates.
Consider the recovery of an unknown signal ${x}$ from quantized linear measurements. In the one-bit compressive sensing setting, one typically assumes that ${x}$ is sparse, and that the measurements are of the form $\operatorname{sign}(\langle {a}_i, {x} \rangle) \in \{\pm1\}$. Since such measurements give no information on the norm of ${x}$, recovery methods from such measurements typically assume that $\| {x} \|_2=1$. We show that if one allows more generally for quantized affine measurements of the form $\operatorname{sign}(\langle {a}_i, {x} \rangle + b_i)$, and if the vectors ${a}_i$ are random, an appropriate choice of the affine shifts $b_i$ allows norm recovery to be easily incorporated into existing methods for one-bit compressive sensing. Additionally, we show that for arbitrary fixed ${x}$ in the annulus $r \leq \| {x} \|_2 \leq R$, one may estimate the norm $\| {x} \|_2$ up to additive error $\delta$ from $m \gtrsim R^4 r^{-2} \delta^{-2}$ such binary measurements through a single evaluation of the inverse Gaussian error function. Finally, all of our recovery guarantees can be made universal over sparse vectors, in the sense that with high probability, one set of measurements and thresholds can successfully estimate all sparse vectors ${x}$ within a Euclidean ball of known radius.
Tensor Compressive Sensing (TCS) is a multidimensional framework of Compressive Sensing (CS), and it is advantageous in terms of reducing the amount of storage, easing hardware implementations and preserving multidimensional structures of signals in comparison to a conventional CS system. In a TCS system, instead of using a random sensing matrix and a predefined dictionary, the average-case performance can be further improved by employing an optimized multidimensional sensing matrix and a learned multilinear sparsifying dictionary. In this paper, we propose a joint optimization approach of the sensing matrix and dictionary for a TCS system. For the sensing matrix design in TCS, an extended separable approach with a closed form solution and a novel iterative non-separable method are proposed when the multilinear dictionary is fixed. In addition, a multidimensional dictionary learning method that takes advantages of the multidimensional structure is derived, and the influence of sensing matrices is taken into account in the learning process. A joint optimization is achieved via alternately iterating the optimization of the sensing matrix and dictionary. Numerical experiments using both synthetic data and real images demonstrate the superiority of the proposed approaches.
A reliable support detection is essential for a greedy algorithm to reconstruct a sparse signal accurately from compressed and noisy measurements. This paper proposes a novel support detection method for greedy algorithms, which is referred to as "\textit{maximum a posteriori (MAP) support detection}". Unlike existing support detection methods that identify support indices with the largest correlation value in magnitude per iteration, the proposed method selects them with the largest likelihood ratios computed under the true and null support hypotheses by simultaneously exploiting the distributions of sensing matrix, sparse signal, and noise. Leveraging this technique, MAP-Matching Pursuit (MAP-MP) is first presented to show the advantages of exploiting the proposed support detection method, and a sufficient condition for perfect signal recovery is derived for the case when the sparse signal is binary. Subsequently, a set of iterative greedy algorithms, called MAP-generalized Orthogonal Matching Pursuit (MAP-gOMP), MAP-Compressive Sampling Matching Pursuit (MAP-CoSaMP), and MAP-Subspace Pursuit (MAP-SP) are presented to demonstrate the applicability of the proposed support detection method to existing greedy algorithms. From empirical results, it is shown that the proposed greedy algorithms with highly reliable support detection can be better, faster, and easier to implement than basis pursuit via linear programming.