We address the problem of reconstructing and analyzing surveillance videos using compressive sensing. We develop a new method that performs video reconstruction by low rank and sparse decomposition adaptively. Background subtraction becomes part of the reconstruction. In our method, a background model is used in which the background is learned adaptively as the compressive measurements are processed. The adaptive method has low latency, and is more robust than previous methods. We will present experimental results to demonstrate the advantages of the proposed method.
The potential of compressive sensing (CS) has spurred great interest in the research community and is a fast growing area of research. However, research translating CS theory into practical hardware and demonstrating clear and significant benefits with this hardware over current, conventional imaging techniques has been limited. This article helps researchers to find those niche applications where the CS approach provides substantial gain over conventional approaches by articulating lessons learned in finding one such application; sea skimming missile detection. As a proof of concept, it is demonstrated that a simplified CS missile detection architecture and algorithm provides comparable results to the conventional imaging approach but using a smaller FPA. The primary message is that all of the excitement surrounding CS is necessary and appropriate for encouraging our creativity but we all must also take off our "rose colored glasses" and critically judge our ideas, methods and results relative to conventional imaging approaches.
Compressive sensing (CS) is a new approach for the acquisition and recovery of sparse signals and images that enables sampling rates significantly below the classical Nyquist rate. Despite significant progress in the theory and methods of CS, little headway has been made in compressive video acquisition and recovery. Video CS is complicated by the ephemeral nature of dynamic events, which makes direct extensions of standard CS imaging architectures and signal models difficult. In this paper, we develop a new framework for video CS for dynamic textured scenes that models the evolution of the scene as a linear dynamical system (LDS). This reduces the video recovery problem to first estimating the model parameters of the LDS from compressive measurements, and then reconstructing the image frames. We exploit the low-dimensional dynamic parameters (the state sequence) and high-dimensional static parameters (the observation matrix) of the LDS to devise a novel compressive measurement strategy that measures only the dynamic part of the scene at each instant and accumulates measurements over time to estimate the static parameters. This enables us to lower the compressive measurement rate considerably. We validate our approach with a range of experiments involving both video recovery, sensing hyper-spectral data, and classification of dynamic scenes from compressive data. Together, these applications demonstrate the effectiveness of the approach.
We propose a dimensionality reducing matrix design based on training data with constraints on its Frobenius norm and number of rows. Our design criteria is aimed at preserving the distances between the data points in the dimensionality reduced space as much as possible relative to their distances in original data space. This approach can be considered as a deterministic Bi-Lipschitz embedding of the data points. We introduce a scalable learning algorithm, dubbed AMUSE, and provide a rigorous estimation guarantee by leveraging game theoretic tools. We also provide a generalization characterization of our matrix based on our sample data. We use compressive sensing problems as an example application of our problem, where the Frobenius norm design constraint translates into the sensing energy.
The classical shift retrieval problem considers two signals in vector form that are related by a shift. The problem is of great importance in many applications and is typically solved by maximizing the cross-correlation between the two signals. Inspired by compressive sensing, in this paper, we seek to estimate the shift directly from compressed signals. We show that under certain conditions, the shift can be recovered using fewer samples and less computation compared to the classical setup. Of particular interest is shift estimation from Fourier coefficients. We show that under rather mild conditions only one Fourier coefficient suffices to recover the true shift.
Multi-view images are acquired by a lensless compressive imaging architecture, which consists of an aperture assembly and multiple sensors. The aperture assembly consists of a two dimensional array of aperture elements whose transmittance can be individually controlled to implement a compressive sensing matrix. For each transmittance pattern of the aperture assembly, each of the sensors takes a measurement. The measurement vectors from the multiple sensors represent multi-view images of the same scene. We present theoretical framework for multi-view reconstruction and experimental results for enhancing quality of image using multi-view.
The goal of compressive sensing is efficient reconstruction of data from few measurements, sometimes leading to a categorical decision. If only classification is required, reconstruction can be circumvented and the measurements needed are orders-of-magnitude sparser still. We define enhanced sparsity as the reduction in number of measurements required for classification over reconstruction. In this work, we exploit enhanced sparsity and learn spatial sensor locations that optimally inform a categorical decision. The algorithm solves an l1-minimization to find the fewest entries of the full measurement vector that exactly reconstruct the discriminant vector in feature space. Once the sensor locations have been identified from the training data, subsequent test samples are classified with remarkable efficiency, achieving performance comparable to that obtained by discrimination using the full image. Sensor locations may be learned from full images, or from a random subsample of pixels. For classification between more than two categories, we introduce a coupling parameter whose value tunes the number of sensors selected, trading accuracy for economy. We demonstrate the algorithm on example datasets from image recognition using PCA for feature extraction and LDA for discrimination; however, the method can be broadly applied to non-image data and adapted to work with other methods for feature extraction and discrimination.
Recent breakthrough results in compressive sensing (CS) have established that many high dimensional signals can be accurately recovered from a relatively small number of non-adaptive linear observations, provided that the signals possess a sparse representation in some basis. Subsequent efforts have shown that the performance of CS can be improved by exploiting additional structure in the locations of the nonzero signal coefficients during inference, or by utilizing some form of data-dependent adaptive measurement focusing during the sensing process. To our knowledge, our own previous work was the first to establish the potential benefits that can be achieved when fusing the notions of adaptive sensing and structured sparsity -- that work examined the task of support recovery from noisy linear measurements, and established that an adaptive sensing strategy specifically tailored to signals that are tree-sparse can significantly outperform adaptive and non-adaptive sensing strategies that are agnostic to the underlying structure. In this work we establish fundamental performance limits for the task of support recovery of tree-sparse signals from noisy measurements, in settings where measurements may be obtained either non-adaptively (using a randomized Gaussian measurement strategy motivated by initial CS investigations) or by any adaptive sensing strategy. Our main results here imply that the adaptive tree sensing procedure analyzed in our previous work is nearly optimal, in the sense that no other sensing and estimation strategy can perform fundamentally better for identifying the support of tree-sparse signals.
This paper introduces the concept of adaptive temporal compressive sensing (CS) for video. We propose a CS algorithm to adapt the compression ratio based on the scene's temporal complexity, computed from the compressed data, without compromising the quality of the reconstructed video. The temporal adaptivity is manifested by manipulating the integration time of the camera, opening the possibility to real-time implementation. The proposed algorithm is a generalized temporal CS approach that can be incorporated with a diverse set of existing hardware systems.
In many signal processing applications, one wishes to acquire images that are sparse in transform domains such as spatial finite differences or wavelets using frequency domain samples. For such applications, overwhelming empirical evidence suggests that superior image reconstruction can be obtained through variable density sampling strategies that concentrate on lower frequencies. The wavelet and Fourier transform domains are not incoherent because low-order wavelets and low-order frequencies are correlated, so compressive sensing theory does not immediately imply sampling strategies and reconstruction guarantees. In this paper we turn to a more refined notion of coherence -- the so-called local coherence -- measuring for each sensing vector separately how correlated it is to the sparsity basis. For Fourier measurements and Haar wavelet sparsity, the local coherence can be controlled and bounded explicitly, so for matrices comprised of frequencies sampled from a suitable inverse square power-law density, we can prove the restricted isometry property with near-optimal embedding dimensions. Consequently, the variable-density sampling strategy we provide allows for image reconstructions that are stable to sparsity defects and robust to measurement noise. Our results cover both reconstruction by $\ell_1$-minimization and by total variation minimization. The local coherence framework developed in this paper should be of independent interest in sparse recovery problems more generally, as it implies that for optimal sparse recovery results, it suffices to have bounded \emph{average} coherence from sensing basis to sparsity basis -- as opposed to bounded maximal coherence -- as long as the sampling strategy is adapted accordingly.
We consider the reconstruction problem in compressed sensing in which the observations are recorded in a finite number of bits. They may thus contain quantization errors (from being rounded to the nearest representable value) and saturation errors (from being outside the range of representable values). Our formulation has an objective of weighted $\ell_2$-$\ell_1$ type, along with constraints that account explicitly for quantization and saturation errors, and is solved with an augmented Lagrangian method. We prove a consistency result for the recovered solution, stronger than those that have appeared to date in the literature, showing in particular that asymptotic consistency can be obtained without oversampling. We present extensive computational comparisons with formulations proposed previously, and variants thereof.
Iterative thresholding algorithms are well-suited for high-dimensional problems in sparse recovery and compressive sensing. The performance of this class of algorithms depends heavily on the tuning of certain threshold parameters. In particular, both the final reconstruction error and the convergence rate of the algorithm crucially rely on how the threshold parameter is set at each step of the algorithm. In this paper, we propose a parameter-free approximate message passing (AMP) algorithm that sets the threshold parameter at each iteration in a fully automatic way without either having an information about the signal to be reconstructed or needing any tuning from the user. We show that the proposed method attains both the minimum reconstruction error and the highest convergence rate. Our method is based on applying the Stein unbiased risk estimate (SURE) along with a modified gradient descent to find the optimal threshold in each iteration. Motivated by the connections between AMP and LASSO, it could be employed to find the solution of the LASSO for the optimal regularization parameter. To the best of our knowledge, this is the first work concerning parameter tuning that obtains the fastest convergence rate with theoretical guarantees.
Multilook processing is a widely used speckle reduction approach in synthetic aperture radar (SAR) imaging. Conventionally, it is achieved by incoherently summing of some independent low-resolution images formulated from overlapping subbands of the SAR signal. However, in the context of compressive sensing (CS) SAR imaging, where the samples are collected at sub-Nyquist rate, the data spectrum is highly aliased that hinders the direct application of the existing multilook techniques. In this letter, we propose a new CS-SAR imaging method that can realize multilook processing simultaneously during image reconstruction. The main idea is to replace the SAR observation matrix by the inverse of multilook procedures, which is then combined with random sampling matrix to yield a multilook CS-SAR observation model. Then a joint sparse regularization model, considering pixel dependency of subimages, is derived to form multilook images. The suggested SAR imaging method can not only reconstruct sparse scene efficiently below Nyquist rate, but is also able to achieve a comparable reduction of speckles during reconstruction. Simulation results are finally provided to demonstrate the effectiveness of the proposed method.
A limitation of many compressive imaging architectures lies in the sequential nature of the sensing process, which leads to long sensing times. In this paper we present a novel architecture that uses fewer detectors than the number of reconstructed pixels and is able to acquire the image in a single acquisition. This paves the way for the development of video architectures that acquire several frames per second. We specifically address the diffraction problem, showing that deconvolution normally used to recover diffraction blur can be replaced by convolution of the sensing matrix, and how measurements of a 0/1 physical sensing matrix can be converted to -1/1 compressive sensing matrix without any extra acquisitions. Simulations of our architecture show that the image quality is comparable to that of a classic Compressive Imaging camera, whereas the proposed architecture avoids long acquisition times due to sequential sensing. This one-shot procedure also allows to employ a fixed sensing matrix instead of a complex device such as a Digital Micro Mirror array or Spatial Light Modulator. It also enables imaging at bandwidths where these are not efficient.
Electron tomography usually suffers from so called missing wedge artifacts caused by limited tilt angle range. An equally sloped tomography (EST) acquisition scheme (which should be called the linogram sampling scheme) was recently applied to achieve 2.4-angstrom resolution. On the other hand, a compressive sensing-inspired reconstruction algorithm, known as adaptive dictionary based statistical iterative reconstruction (ADSIR), has been reported for x-ray computed tomography. In this paper, we evaluate the EST, ADSIR and an ordered-subset simultaneous algebraic reconstruction technique (OS-SART), and compare the ES and equally angled (EA) data acquisition modes. Our results show that OS-SART is comparable to EST, and the ADSIR outperforms EST and OS-SART. Furthermore, the equally sloped projection data acquisition mode has no advantage over the conventional equally angled mode in the context.
Hard Thresholding Pursuit (HTP) is an iterative greedy selection procedure for finding sparse solutions of underdetermined linear systems. This method has been shown to have strong theoretical guarantee and impressive numerical performance. In this paper, we generalize HTP from compressive sensing to a generic problem setup of sparsity-constrained convex optimization. The proposed algorithm iterates between a standard gradient descent step and a hard thresholding step with or without debiasing. We prove that our method enjoys the strong guarantees analogous to HTP in terms of rate of convergence and parameter estimation accuracy. Numerical evidences show that our method is superior to the state-of-the-art greedy selection methods in sparse logistic regression and sparse precision matrix estimation tasks.
This work considers an estimation task in compressive sensing, where the goal is to estimate an unknown signal from compressive measurements that are corrupted by additive pre-measurement noise (interference, or clutter) as well as post-measurement noise, in the specific setting where some (perhaps limited) prior knowledge on the signal, interference, and noise is available. The specific aim here is to devise a strategy for incorporating this prior information into the design of an appropriate compressive measurement strategy. Here, the prior information is interpreted as statistics of a prior distribution on the relevant quantities, and an approach based on Bayesian Experimental Design is proposed. Experimental results on synthetic data demonstrate that the proposed approach outperforms traditional random compressive measurement designs, which are agnostic to the prior information, as well as several other knowledge-enhanced sensing matrix designs based on more heuristic notions.
Compressed sensing enables the reconstruction of high-resolution signals from under-sampled data. While compressive methods simplify data acquisition, they require the solution of difficult recovery problems to make use of the resulting measurements. This article presents a new sensing framework that combines the advantages of both conventional and compressive sensing. Using the proposed \stone transform, measurements can be reconstructed instantly at Nyquist rates at any power-of-two resolution. The same data can then be "enhanced" to higher resolutions using compressive methods that leverage sparsity to "beat" the Nyquist limit. The availability of a fast direct reconstruction enables compressive measurements to be processed on small embedded devices. We demonstrate this by constructing a real-time compressive video camera.
This is an overview paper written in style of research proposal. In recent years we introduced a general framework for large-scale unconstrained optimization -- Sequential Subspace Optimization (SESOP) and demonstrated its usefulness for sparsity-based signal/image denoising, deconvolution, compressive sensing, computed tomography, diffraction imaging, support vector machines. We explored its combination with Parallel Coordinate Descent and Separable Surrogate Function methods, obtaining state of the art results in above-mentioned areas. There are several methods, that are faster than plain SESOP under specific conditions: Trust region Newton method - for problems with easily invertible Hessian matrix; Truncated Newton method - when fast multiplication by Hessian is available; Stochastic optimization methods - for problems with large stochastic-type data; Multigrid methods - for problems with nested multilevel structure. Each of these methods can be further improved by merge with SESOP. One can also accelerate Augmented Lagrangian method for constrained optimization problems and Alternating Direction Method of Multipliers for problems with separable objective function and non-separable constraints.
A new shrinkage-based construction is developed for a compressible vector $\boldsymbol{x}\in\mathbb{R}^n$, for cases in which the components of $\xv$ are naturally associated with a tree structure. Important examples are when $\xv$ corresponds to the coefficients of a wavelet or block-DCT representation of data. The method we consider in detail, and for which numerical results are presented, is based on increments of a gamma process. However, we demonstrate that the general framework is appropriate for many other types of shrinkage priors, all within the L\'{e}vy process family, with the gamma process a special case. Bayesian inference is carried out by approximating the posterior with samples from an MCMC algorithm, as well as by constructing a heuristic variational approximation to the posterior. We also consider expectation-maximization (EM) for a MAP (point) solution. State-of-the-art results are manifested for compressive sensing and denoising applications, the latter with spiky (non-Gaussian) noise.