Linear Independent Component Analysis (ICA) is a blind source separation technique that has been used in various domains to identify independent latent sources from observed signals. In order to obtain a higher signal-to-noise ratio, the presence of multiple views of the same sources can be used. In this work, we present MultiView Independent Component Analysis with Delays (MVICAD). This algorithm builds on the MultiView ICA model by allowing sources to be delayed versions of some shared sources: sources are shared across views up to some unknown latencies that are view- and source-specific. Using simulations, we demonstrate that MVICAD leads to better unmixing of the sources. Moreover, as ICA is often used in neuroscience, we show that latencies are age-related when applied to Cam-CAN, a large-scale magnetoencephalography (MEG) dataset. These results demonstrate that the MVICAD model can reveal rich effects on neural signals without human supervision.
Time-modulated arrays (TMA) transmitting orthogonal frequency division multiplexing (OFDM) waveforms achieve physical layer security by allowing the signal to reach the legitimate destination undistorted, while making the signal appear scrambled in all other directions. In this paper, we examine how secure the TMA OFDM system is, and show that it is possible for the eavesdropper to defy the scrambling. In particular, we show that, based on the scrambled signal, the eavesdropper can formulate a blind source separation problem and recover data symbols and TMA parameters via independent component analysis (ICA) techniques. We show how the scaling and permutation ambiguities arising in ICA can be resolved by exploiting the Toeplitz structure of the corresponding mixing matrix, and knowledge of data constellation, OFDM specifics, and the rules for choosing TMA parameters. We also introduce a novel TMA implementation to defend the scrambling against the eavesdropper.
EEG continues to find a multitude of uses in both neuroscience research and medical practice, and independent component analysis (ICA) continues to be an important tool for analyzing EEG. A multitude of ICA algorithms for EEG decomposition exist, and in the past, their relative effectiveness has been studied. AMICA is considered the benchmark against which to compare the performance of other ICA algorithms for EEG decomposition. AMICA exposes many parameters to the user to allow for precise control of the decomposition. However, several of the parameters currently tend to be set according to "rules of thumb" shared in the EEG community. Here, AMICA decompositions are run on data from a collection of subjects while varying certain key parameters. The running time and quality of decompositions are analyzed based on two metrics: Pairwise Mutual Information (PMI) and Mutual Information Reduction (MIR). Recommendations for selecting starting values for parameters are presented.
The dynamics of a power system with a significant presence of renewable energy resources are growing increasingly nonlinear. This nonlinearity is a result of the intermittent nature of these resources and the switching behavior of their power electronic devices. Therefore, it is crucial to address these nonlinearity in the blind source separation methods. In this paper, we propose a blind source separation of a linear mixture of dependent sources based on copula statistics that measure the non-linear dependence between source component signals structured as copula density functions. The source signals are assumed to be stationary. The method minimizes the Kullback-Leibler divergence between the copula density functions of the estimated sources and of the dependency structure. The proposed method is applied to data obtained from the time-domain analysis of the classical 11-Bus 4-Machine system. Extensive simulation results demonstrate that the proposed method based on copula statistics converges faster and outperforms the state-of-the-art blind source separation method for dependent sources in terms of interference-to-signal ratio.
The task of blind source separation (BSS) involves separating sources from a mixture without prior knowledge of the sources or the mixing system. Single-channel mixtures and non-linear mixtures are a particularly challenging problem in BSS. In this paper, we propose a novel method for addressing BSS with single-channel non-linear mixtures by leveraging the natural feature subspace specialization ability of multi-encoder autoencoders. During the training phase, our method unmixes the input into the separate encoding spaces of the multi-encoder network and then remixes these representations within the decoder for a reconstruction of the input. Then to perform source inference, we introduce a novel encoding masking technique whereby masking out all but one of the encodings enables the decoder to estimate a source signal. To this end, we also introduce a sparse mixing loss that encourages sparse remixing of source encodings throughout the decoder and a so-called zero reconstruction loss on the decoder for coherent source estimations. To analyze and evaluate our method, we conduct experiments on a toy dataset, designed to demonstrate this property of feature subspace specialization, and with real-world biosignal recordings from a polysomnography sleep study for extracting respiration from electrocardiogram and photoplethysmography signals.
The burgeoning growth of public domain data and the increasing complexity of deep learning model architectures have underscored the need for more efficient data representation and analysis techniques. This paper is motivated by the work of (Helal, 2023) and aims to present a comprehensive overview of tensorization. This transformative approach bridges the gap between the inherently multidimensional nature of data and the simplified 2-dimensional matrices commonly used in linear algebra-based machine learning algorithms. This paper explores the steps involved in tensorization, multidimensional data sources, various multiway analysis methods employed, and the benefits of these approaches. A small example of Blind Source Separation (BSS) is presented comparing 2-dimensional algorithms and a multiway algorithm in Python. Results indicate that multiway analysis is more expressive. Contrary to the intuition of the dimensionality curse, utilising multidimensional datasets in their native form and applying multiway analysis methods grounded in multilinear algebra reveal a profound capacity to capture intricate interrelationships among various dimensions while, surprisingly, reducing the number of model parameters and accelerating processing. A survey of the multi-away analysis methods and integration with various Deep Neural Networks models is presented using case studies in different application domains.
Introduction: Electroencephalogram (EEG) signals have gained significant popularity in various applications due to their rich information content. However, these signals are prone to contamination from various sources of artifacts, notably the electrooculogram (EOG) artifacts caused by eye movements. The most effective approach to mitigate EOG artifacts involves recording EOG signals simultaneously with EEG and employing blind source separation techniques, such as independent component analysis (ICA). Nevertheless, the availability of EOG recordings is not always feasible, particularly in pre-recorded datasets. Objective: In this paper, we present a novel methodology that combines a long short-term memory (LSTM)-based neural network with ICA to address the challenge of EOG artifact removal from contaminated EEG signals. Approach: Our approach aims to accomplish two primary objectives: 1) estimate the horizontal and vertical EOG signals from the contaminated EEG data, and 2) employ ICA to eliminate the estimated EOG signals from the EEG, thereby producing an artifact-free EEG signal. Main results: To evaluate the performance of our proposed method, we conducted experiments on a publicly available dataset comprising recordings from 27 participants. We employed well-established metrics such as mean squared error, mean absolute error, and mean error to assess the quality of our artifact removal technique. Significance: Furthermore, we compared the performance of our approach with two state-of-the-art deep learning-based methods reported in the literature, demonstrating the superior performance of our proposed methodology.
Over 1.5 billion people worldwide live with hearing impairment. Despite various technologies that have been created for individuals with such disabilities, most of these technologies are either extremely expensive or inaccessible for everyday use in low-medium income countries. In order to combat this issue, we have developed a new assistive device, EchoVest, for blind/deaf people to intuitively become more aware of their environment. EchoVest transmits vibrations to the user's body by utilizing transcutaneous electric nerve stimulation (TENS) based on the source of the sounds. EchoVest also provides various features, including sound localization, sound classification, noise reduction, and depth perception. We aimed to outperform CNN-based machine-learning models, the most commonly used machine learning model for classification tasks, in accuracy and computational costs. To do so, we developed and employed a novel audio pipeline that adapts the Audio Spectrogram Transformer (AST) model, an attention-based model, for our sound classification purposes, and Fast Fourier Transforms for noise reduction. The application of Otsu's Method helped us find the optimal thresholds for background noise sound filtering and gave us much greater accuracy. In order to calculate direction and depth accurately, we applied Complex Time Difference of Arrival algorithms and SOTA localization. Our last improvement was to use blind source separation to make our algorithms applicable to multiple microphone inputs. The final algorithm achieved state-of-the-art results on numerous checkpoints, including a 95.7\% accuracy on the ESC-50 dataset for environmental sound classification.
The paradigm of self-supervision focuses on representation learning from raw data without the need of labor-consuming annotations, which is the main bottleneck of current data-driven methods. Self-supervision tasks are often used to pre-train a neural network with a large amount of unlabeled data and extract generic features of the dataset. The learned model is likely to contain useful information which can be transferred to the downstream main task and improve performance compared to random parameter initialization. In this paper, we propose a new self-supervision task called source identification (SI), which is inspired by the classic blind source separation problem. Synthetic images are generated by fusing multiple source images and the network's task is to reconstruct the original images, given the fused images. A proper understanding of the image content is required to successfully solve the task. We validate our method on two medical image segmentation tasks: brain tumor segmentation and white matter hyperintensities segmentation. The results show that the proposed SI task outperforms traditional self-supervision tasks for dense predictions including inpainting, pixel shuffling, intensity shift, and super-resolution. Among variations of the SI task fusing images of different types, fusing images from different patients performs best.
Objective: Analysis of the electroencephalogram (EEG) for epileptic spike and seizure detection or brain-computer interfaces can be severely hampered by the presence of artifacts. The aim of this study is to describe and evaluate a fast automatic algorithm for ongoing correction of artifacts in continuous EEG recordings, which can be applied offline and online. Methods: The automatic algorithm for ongoing correction of artifacts is based on fast blind source separation. It uses a sliding window technique with overlapping epochs and features in the spatial, temporal and frequency domain to detect and correct ocular, cardiac, muscle and powerline artifacts. Results: The approach was validated in an independent evaluation study on publicly available continuous EEG data with 2035 marked artifacts. Validation confirmed that 88% of the artifacts could be removed successfully (ocular: 81%, cardiac: 84%, muscle: 98%, powerline: 100%). It outperformed state-of-the-art algorithms both in terms of artifact reduction rates and computation time. Conclusions: Fast ongoing artifact correction successfully removed a good proportion of artifacts, while preserving most of the EEG signals. Significance: The presented algorithm may be useful for ongoing correction of artifacts, e.g., in online systems for epileptic spike and seizure detection or brain-computer interfaces.
This paper describes an efficient unsupervised learning method for a neural source separation model that utilizes a probabilistic generative model of observed multichannel mixtures proposed for blind source separation (BSS). For this purpose, amortized variational inference (AVI) has been used for directly solving the inverse problem of BSS with full-rank spatial covariance analysis (FCA). Although this unsupervised technique called neural FCA is in principle free from the domain mismatch problem, it is computationally demanding due to the full rankness of the spatial model in exchange for robustness against relatively short reverberations. To reduce the model complexity without sacrificing performance, we propose neural FastFCA based on the jointly-diagonalizable yet full-rank spatial model. Our neural separation model introduced for AVI alternately performs neural network blocks and single steps of an efficient iterative algorithm called iterative source steering. This alternating architecture enables the separation model to quickly separate the mixture spectrogram by leveraging both the deep neural network and the multichannel optimization algorithm. The training objective with AVI is derived to maximize the marginalized likelihood of the observed mixtures. The experiment using mixture signals of two to four sound sources shows that neural FastFCA outperforms conventional BSS methods and reduces the computational time to about 2% of that for the neural FCA.
In a range of recent works, object-centric architectures have been shown to be suitable for unsupervised scene decomposition in the vision domain. Inspired by these methods we present AudioSlots, a slot-centric generative model for blind source separation in the audio domain. AudioSlots is built using permutation-equivariant encoder and decoder networks. The encoder network based on the Transformer architecture learns to map a mixed audio spectrogram to an unordered set of independent source embeddings. The spatial broadcast decoder network learns to generate the source spectrograms from the source embeddings. We train the model in an end-to-end manner using a permutation invariant loss function. Our results on Libri2Mix speech separation constitute a proof of concept that this approach shows promise. We discuss the results and limitations of our approach in detail, and further outline potential ways to overcome the limitations and directions for future work.
Auscultation provides a rich diversity of information to diagnose cardiovascular and respiratory diseases. However, sound auscultation is challenging due to noise. In this study, a modified version of the affine non-negative matrix factorization (NMF) approach is proposed to blindly separate lung and heart sounds recorded by a digital stethoscope. This method applies a novel NMF algorithm, which embodies a parallel structure of multilayer units on the input signal, to find a proper estimation of source signals. Another key innovation is the use of the periodic property of the signals which improves accuracy compared to previous works. The method is tested on 100 cases. Each case consists of two synthesized mixtures of real measurements. The effect of different parameters is discussed, and the results are compared to other current methods. Results demonstrate improvements in the source-to-distortion ratio (SDR), source-to-interference ratio (SIR), and source-to-artifacts ratio (SAR) of heart and lung sounds, respectively.
Blind source separation (BSS) aims to recover an unobserved signal $S$ from its mixture $X=f(S)$ under the condition that the effecting transformation $f$ is invertible but unknown. As this is a basic problem with many practical applications, a fundamental issue is to understand how the solutions to this problem behave when their supporting statistical prior assumptions are violated. In the classical context of linear mixtures, we present a general framework for analysing such violations and quantifying their impact on the blind recovery of $S$ from $X$. Modelling $S$ as a multidimensional stochastic process, we introduce an informative topology on the space of possible causes underlying a mixture $X$, and show that the behaviour of a generic BSS-solution in response to general deviations from its defining structural assumptions can be profitably analysed in the form of explicit continuity guarantees with respect to this topology. This allows for a flexible and convenient quantification of general model uncertainty scenarios and amounts to the first comprehensive robustness framework for BSS. Our approach is entirely constructive, and we demonstrate its utility with novel theoretical guarantees for a number of statistical applications.
Non-intrusive load monitoring (NILM) aims to decompose aggregated electrical usage signal into appliance-specific power consumption and it amounts to a classical example of blind source separation tasks. Leveraging recent progress on deep learning techniques, we design a new neural NILM model Multi-State Dual CNN (MSDC). Different from previous models, MSDC explicitly extracts information about the appliance's multiple states and state transitions, which in turn regulates the prediction of signals for appliances. More specifically, we employ a dual-CNN architecture: one CNN for outputting state distributions and the other for predicting the power of each state. A new technique is invented that utilizes conditional random fields (CRF) to capture state transitions. Experiments on two real-world datasets REDD and UK-DALE demonstrate that our model significantly outperform state-of-the-art models while having good generalization capacity, achieving 6%-10% MAE gain and 33%-51% SAE gain to unseen appliances.
The dynamics of a power system with large penetration of renewable energy resources are becoming more nonlinear due to the intermittence of these resources and the switching of their power electronic devices. Therefore, it is crucial to accurately identify the dynamical modes of oscillation of such a power system when it is subject to disturbances to initiate appropriate preventive or corrective control actions. In this paper, we propose a high-order blind source identification (HOBI) algorithm based on the copula statistic to address these non-linear dynamics in modal analysis. The method combined with Hilbert transform (HOBI-HT) and iteration procedure (HOBMI) can identify all the modes as well as the model order from the observation signals obtained from the number of channels as low as one. We access the performance of the proposed method on numerical simulation signals and recorded data from a simulation of time domain analysis on the classical 11-Bus 4-Machine test system. Our simulation results outperform the state-of-the-art method in accuracy and effectiveness.
Blind source separation (BSS) techniques have revealed to be promising approaches for, among other, biomedical signal processing applications. Specifically, for the noninvasive extraction of fetal cardiac signals from maternal abdominal recordings, where conventional filtering schemes have failed to extract the complete fetal ECG components. From previous studies, it is now believed that a carefully selected array of electrodes well-placed over the abdomen of a pregnant woman contains the required `information' for BSS, to extract the complete fetal components. Based on this idea, in previous works array recording systems and sensor selection strategies based on the Mutual Information (MI) criterion have been developed. In this paper the previous works have been extended, by considering the 3-dimensional aspects of the cardiac electrical activity. The proposed method has been tested on simulated and real maternal abdominal recordings. The results show that the new sensor selection strategy together with the MI criterion, can be effectively used to select the channels containing the most `information' concerning the fetal ECG components from an array of 72 recordings. The method is hence believed to be useful for the selection of the most informative channels in online applications, considering the different fetal positions and movements.
Independent component analysis (ICA) is a blind source separation method to recover source signals of interest from their mixtures. Most existing ICA procedures assume independent sampling. Second-order-statistics-based source separation methods have been developed based on parametric time series models for the mixtures from the autocorrelated sources. However, the second-order-statistics-based methods cannot separate the sources accurately when the sources have temporal autocorrelations with mixed spectra. To address this issue, we propose a new ICA method by estimating spectral density functions and line spectra of the source signals using cubic splines and indicator functions, respectively. The mixed spectra and the mixing matrix are estimated by maximizing the Whittle likelihood function. We illustrate the performance of the proposed method through simulation experiments and an EEG data application. The numerical results indicate that our approach outperforms existing ICA methods, including SOBI algorithms. In addition, we investigate the asymptotic behavior of the proposed method.
Guided source separation (GSS) is a type of target-speaker extraction method that relies on pre-computed speaker activities and blind source separation to perform front-end enhancement of overlapped speech signals. It was first proposed during the CHiME-5 challenge and provided significant improvements over the delay-and-sum beamforming baseline. Despite its strengths, however, the method has seen limited adoption for meeting transcription benchmarks primarily due to its high computation time. In this paper, we describe our improved implementation of GSS that leverages the power of modern GPU-based pipelines, including batched processing of frequencies and segments, to provide 300x speed-up over CPU-based inference. The improved inference time allows us to perform detailed ablation studies over several parameters of the GSS algorithm -- such as context duration, number of channels, and noise class, to name a few. We provide end-to-end reproducible pipelines for speaker-attributed transcription of popular meeting benchmarks: LibriCSS, AMI, and AliMeeting. Our code and recipes are publicly available: https://github.com/desh2608/gss.
We consider the problem of direction finding using partly calibrated arrays, a distributed subarray with position errors between subarrays. The key challenge is to enhance angular resolution in the presence of position errors. To achieve this goal, existing algorithms, such as subspace separation and sparse recovery, have to rely on multiple snapshots, which increases the burden of data transmission and the processing delay. Therefore, we aim to enhance angular resolution using only a single snapshot. To this end, we exploit the orthogonality of the signals of partly calibrated arrays. Particularly, we transform the signal model into a special multiple-measurement model, show that there is approximate orthogonality between the source signals in this model, and then use blind source separation to exploit the orthogonality. Simulation and experiment results both verify that our proposed algorithm achieves high angular resolution as distributed arrays without position errors, inversely proportional to the whole array aperture.