Generative semantic communication (Gen-SemCom) with large artificial intelligence (AI) model promises a transformative paradigm for 6G networks, which reduces communication costs by transmitting low-dimensional prompts rather than raw data. However, purely prompt-driven generation loses fine-grained visual details. Additionally, there is a lack of systematic metrics to evaluate the performance of Gen-SemCom systems. To address these issues, we develop a hybrid Gen-SemCom system with a critical information embedding (CIE) framework, where both text prompts and semantically critical features are extracted for transmissions. First, a novel approach of semantic filtering is proposed to select and transmit the semantically critical features of images relevant to semantic label. By integrating the text prompt and critical features, the receiver reconstructs high-fidelity images using a diffusion-based generative model. Next, we propose the generative visual information fidelity (GVIF) metric to evaluate the visual quality of the generated image. By characterizing the statistical models of image features, the GVIF metric quantifies the mutual information between the distorted features and their original counterparts. By maximizing the GVIF metric, we design a channel-adaptive Gen-SemCom system that adaptively control the volume of features and compression rate according to the channel state. Experimental results validate the GVIF metric's sensitivity to visual fidelity, correlating with both the PSNR and critical information volume. In addition, the optimized system achieves superior performance over benchmarking schemes in terms of higher PSNR and lower FID scores.
Semantic communications represent a new paradigm of next-generation networking that shifts bit-wise data delivery to conveying the semantic meanings for bandwidth efficiency. To effectively accommodate various potential downstream tasks at the receiver side, one should adaptively convey the most critical semantic information. This work presents a novel task-adaptive semantic communication framework based on diffusion models that is capable of dynamically adjusting the semantic message delivery according to various downstream tasks. Specifically, we initialize the transmission of a deep-compressed general semantic representation from the transmitter to enable diffusion-based coarse data reconstruction at the receiver. The receiver identifies the task-specific demands and generates textual prompts as feedback. Integrated with the attention mechanism, the transmitter updates the semantic transmission with more details to better align with the objectives of the intended receivers. Our test results demonstrate the efficacy of the proposed method in adaptively preserving critical task-relevant information for semantic communications while preserving high compression efficiency.
With the continuous increase in the number and resolution of video surveillance cameras, the burden of transmitting and storing surveillance video is growing. Traditional communication methods based on Shannon's theory are facing optimization bottlenecks. Semantic communication, as an emerging communication method, is expected to break through this bottleneck and reduce the storage and transmission consumption of video. Existing semantic decoding methods often require many samples to train the neural network for each scene, which is time-consuming and labor-intensive. In this study, a semantic encoding and decoding method for surveillance video is proposed. First, the sketch was extracted as semantic information, and a sketch compression method was proposed to reduce the bit rate of semantic information. Then, an image translation network was proposed to translate the sketch into a video frame with a reference frame. Finally, a few-shot sketch decoding network was proposed to reconstruct video from sketch. Experimental results showed that the proposed method achieved significantly better video reconstruction performance than baseline methods. The sketch compression method could effectively reduce the storage and transmission consumption of semantic information with little compromise on video quality. The proposed method provides a novel semantic encoding and decoding method that only needs a few training samples for each surveillance scene, thus improving the practicality of the semantic communication system.
Analog machine-learning hardware platforms promise greater speed and energy efficiency than their digital counterparts. Specifically, over-the-air analog computation allows offloading computation to the wireless propagation through carefully constructed transmitted signals. In addition, reconfigurable intelligent surface (RIS) is emerging as a promising solution for next-generation wireless networks, offering the ability to tailor the communication environment. Leveraging the advantages of RIS, we design and implement the ordinary differential equation (ODE) neural network using over-the-air computation (AirComp) and demonstrate its effectiveness for dual tasks. We engineer the ambient wireless propagation environment through distributed RISs to create an architecture termed the over-the-air ordinary differential equation (Air-ODE) network. Unlike the conventional digital ODE-inspired neural network, the Air-ODE block utilizes the physics of wave reflection and the reconfigurable phase shifts of RISs to implement an ODE block in the analog domain, enhancing spectrum efficiency. Moreover, the advantages of Air-ODE are demonstrated in a deep learning-based semantic communication (DeepSC) system by extracting effective semantic information to reduce the data transmission load, while achieving the dual functions of image reconstruction and semantic tagging simultaneously at the receiver. Simulation results show that the analog Air-ODE network can achieve similar performance to the digital ODE-inspired network. Specifically, for the image reconstruction and semantic tagging task, compared with the analog network without the Air-ODE block, the Air-ODE block can achieve around 2 times gain in both reconstruction quality and tagging accuracy.
As one of the most promising technologies for intellicise (intelligent and consice) wireless networks, Semantic Communication (SemCom) significantly improves communication efficiency by extracting, transmitting, and recovering semantic information, while reducing transmission delay. However, an integration of communication and artificial intelligence (AI) also exposes SemCom to security and privacy threats posed by intelligent eavesdroppers. To address this challenge, image steganography in SemCom embeds secret semantic features within cover semantic features, allowing intelligent eavesdroppers to decode only the cover image. This technique offers a form of "invisible encryption" for SemCom. Motivated by these advancements, this paper conducts a comprehensive exploration of integrating image steganography into SemCom. Firstly, we review existing encryption techniques in SemCom and assess the potential of image steganography in enhancing its security. Secondly, we delve into various image steganographic paradigms designed to secure SemCom, encompassing three categories of joint source-channel coding (JSCC) models tailored for image steganography SemCom, along with multiple training strategies. Thirdly, we present a case study to illustrate the effectiveness of coverless steganography SemCom. Finally, we propose future research directions for image steganography SemCom.
Recently, semantic communication (SemCom) has shown its great superiorities in resource savings and information exchanges. However, while its unique background knowledge guarantees accurate semantic reasoning and recovery, semantic information security-related concerns are introduced at the same time. Since the potential eavesdroppers may have the same background knowledge to accurately decrypt the private semantic information transmitted between legal SemCom users, this makes the knowledge management in SemCom networks rather challenging in joint consideration with the power control. To this end, this paper focuses on jointly addressing three core issues of power allocation, knowledge base caching (KBC), and device-to-device (D2D) user pairing (DUP) in secure SemCom networks. We first develop a novel performance metric, namely semantic secrecy throughput (SST), to quantify the information security level that can be achieved at each pair of D2D SemCom users. Next, an SST maximization problem is formulated subject to secure SemCom-related delay and reliability constraints. Afterward, we propose a security-aware resource management solution using the Lagrange primal-dual method and a two-stage method. Simulation results demonstrate our proposed solution nearly doubles the SST performance and realizes less than half of the queuing delay performance compared to different benchmarks.
As a paradigm shift towards pervasive intelligence, semantic communication (SemCom) has shown great potentials to improve communication efficiency and provide user-centric services by delivering task-oriented semantic meanings. However, the exponential growth in connected devices, data volumes, and communication demands presents significant challenges for practical SemCom design, particularly in resource-constrained wireless networks. In this work, we first propose a task-agnostic SemCom (TASC) framework that can handle diverse tasks with multiple modalities. Aiming to explore the interplay between communications and intelligent tasks from the information-theoretical perspective, we leverage information bottleneck (IB) theory and propose a distributed multimodal IB (DMIB) principle to learn minimal and sufficient unimodal and multimodal information effectively by discarding redundancy while preserving task-related information. To further reduce the communication overhead, we develop an adaptive semantic feature transmission method under dynamic channel conditions. Then, TASC is trained based on federated meta-learning (FML) for rapid adaptation and generalization in wireless networks. To gain deep insights, we rigorously conduct theoretical analysis and devise resource management to accelerate convergence while minimizing the training latency and energy consumption. Moreover, we develop a joint user selection and resource allocation algorithm to address the non-convex problem with theoretical guarantees. Extensive simulation results validate the effectiveness and superiority of the proposed TASC compared to baselines.
Semantic communication is recognized for its high compression efficiency and robust resistance to noise. However, utilizing a fixed transmission rate in environments with dynamic signal-to-noise ratios (SNR) often results in inefficient use of communication resources. To address this challenge, this letter proposes an importance-aware rate control semantic communication (IRCSC) scheme, which dynamically adjusts transmission rates in response to both channel conditions and semantic importance. The scheme employs a contribution-based importance analyzer to rank semantic importance. Additionaly, a novel metric, the semantic transmission integrity index (STII), is proposed to quantify the amount of correctly transmitted information and to correlate it with inference performance. Simulations indicate that, with low computational complexity, IRCSC guarantees a controllable trade-off between performance and rate, delivering higher compression efficiency and improved task performance in high-SNR scenarios.
In the upcoming industrial internet of things (IIoT) era, a surge of task-oriented applications will rely on real-time wireless control systems (WCSs). For these systems, ultra-reliable and low-latency wireless communication will be crucial to ensure the timely transmission of control information. To achieve this purpose, we propose a novel time-sequence-based semantic communication paradigm, where an integrated sensing, computing, communication, and control (ISC3) architecture is developed to make sensible semantic inference (SI) for the control information over time sequences, enabling adaptive control of the robot. However, due to the causal correlations in the time sequence, the control information does not present the Markov property. To address this challenge, we compute the mutual information of the control information sensed at the transmitter (Tx) over different time and identify their temporal semantic correlation via a semantic feature extractor (SFE) module. By this means, highly correlated information transmission can be avoided, thus greatly reducing the communication overhead. Meanwhile, a semantic feature reconstructor (SFR) module is employed at the receiver (Rx) to reconstruct the control information based on the previously received one if the information transmission is not activated at the Tx. Furthermore, a control gain policy is also employed at the Rx to adaptively adjust the control gain for the controlled target based on several practical aspects such as the quality of the information transmission from the Tx to the Rx. We design the neural network structures of the above modules/policies and train their parameters by a novel hybrid reward multi-agent deep reinforcement learning framework. On-site experiments are conducted to evaluate the performance of our proposed method in practice, which shows significant gains over other baseline schemes.
Task-oriented semantic communication has emerged as a fundamental approach for enhancing performance in various communication scenarios. While recent advances in Generative Artificial Intelligence (GenAI), such as Large Language Models (LLMs), have been applied to semantic communication designs, the potential of Large Multimodal Models (LMMs) remains largely unexplored. In this paper, we investigate an LMM-based vehicle AI assistant using a Large Language and Vision Assistant (LLaVA) and propose a task-oriented semantic communication framework to facilitate efficient interaction between users and cloud servers. To reduce computational demands and shorten response time, we optimize LLaVA's image slicing to selectively focus on areas of utmost interest to users. Additionally, we assess the importance of image patches by combining objective and subjective user attention, adjusting energy usage for transmitting semantic information. This strategy optimizes resource utilization, ensuring precise transmission of critical information. We construct a Visual Question Answering (VQA) dataset for traffic scenarios to evaluate effectiveness. Experimental results show that our semantic communication framework significantly increases accuracy in answering questions under the same channel conditions, performing particularly well in environments with poor Signal-to-Noise Ratios (SNR). Accuracy can be improved by 13.4% at an SNR of 12dB and 33.1% at 10dB, respectively.
Semantic communications leverage artificial intelligence (AI) technologies to extract semantic information for efficient data delivery, thereby significantly reducing communication cost. With the evolution towards artificial general intelligence (AGI), the increasing demands for AGI services pose new challenges to semantic communications. In this context, an AGI application is typically defined on a general-sense task, covering a broad, even unforeseen, set of objectives, as well as driven by the need for a human-friendly interface in forms (e.g., videos, images, or text) easily understood by human users.In response, we introduce an AGI-driven communication paradigm for supporting AGI applications, called generative semantic communication (GSC). We first describe the basic concept of GSC and its difference from existing semantic communications, and then introduce a general framework of GSC based on advanced AI technologies including foundation models and generative models. Two case studies are presented to verify the advantages of GSC. Finally, open challenges and new research directions are discussed to stimulate this line of research and pave the way for practical applications.
This paper proposes a novel end-to-end digital semantic communication framework based on multi-codebook vector quantization (VQ), referred to as ESC-MVQ. Unlike prior approaches that rely on end-to-end training with a specific power or modulation scheme, often under a particular channel condition, ESC-MVQ models a channel transfer function as parallel binary symmetric channels (BSCs) with trainable bit-flip probabilities. Building on this model, ESC-MVQ jointly trains multiple VQ codebooks and their associated bit-flip probabilities with a single encoder-decoder pair. To maximize inference performance when deploying ESC-MVQ in digital communication systems, we devise an optimal communication strategy that jointly optimizes codebook assignment, adaptive modulation, and power allocation. To this end, we develop an iterative algorithm that selects the most suitable VQ codebook for semantic features and flexibly allocates power and modulation schemes across the transmitted symbols. Simulation results demonstrate that ESC-MVQ, using a single encoder-decoder pair, outperforms existing digital semantic communication methods in both performance and memory efficiency, offering a scalable and adaptive solution for realizing digital semantic communication in diverse channel conditions.
The next generation of wireless communications seeks to deeply integrate artificial intelligence (AI) with user-centric communication networks, with the goal of developing AI-native networks that more accurately address user requirements. The rapid development of large language models (LLMs) offers significant potential in realizing these goals. However, existing efforts that leverage LLMs for wireless communication often overlook the considerable gap between human natural language and the intricacies of real-world communication systems, thus failing to fully exploit the capabilities of LLMs. To address this gap, we propose a novel LLM-driven paradigm for wireless communication that innovatively incorporates the nature language to structured query language (NL2SQL) tool. Specifically, in this paradigm, user personal requirements is the primary focus. Upon receiving a user request, LLMs first analyze the user intent in terms of relevant communication metrics and system parameters. Subsequently, a structured query language (SQL) statement is generated to retrieve the specific parameter values from a high-performance real-time database. We further utilize LLMs to formulate and solve an optimization problem based on the user request and the retrieved parameters. The solution to this optimization problem then drives adjustments in the communication system to fulfill the user's requirements. To validate the feasibility of the proposed paradigm, we present a prototype system. In this prototype, we consider user-request centric semantic communication (URC-SC) system in which a dynamic semantic representation network at the physical layer adapts its encoding depth to meet user requirements. Additionally, two LLMs are employed to analyze user requests and generate SQL statements, respectively. Simulation results demonstrate the effectiveness.
Semantic communications have emerged as a crucial research direction for future wireless communication networks. However, as wireless systems become increasingly complex, the demands for computation and communication resources in semantic communications continue to grow rapidly. This paper investigates the trade-off between computation and communication in wireless semantic communications, taking into consideration transmission task delay and performance constraints within the semantic communication framework. We propose a novel tradeoff metric to analyze the balance between computation and communication in semantic transmissions and employ the deep reinforcement learning (DRL) algorithm to minimize this metric, thereby reducing the cost associated with balancing computation and communication. Through simulations, we analyze the tradeoff between computation and communication and demonstrate the effectiveness of optimizing this trade-off metric.
This paper focuses on a typical uplink transmission scenario over multiple-input multiple-output multiple access channel (MIMO-MAC) and thus propose a multi-user learnable CSI fusion semantic communication (MU-LCFSC) framework. It incorporates CSI as the side information into both the semantic encoders and decoders to generate a proper feature mask map in order to produce a more robust attention weight distribution. Especially for the decoding end, a cooperative successive interference cancellation procedure is conducted along with a cooperative mask ratio generator, which flexibly controls the mask elements of feature mask maps. Numerical results verify the superiority of proposed MU-LCFSC compared to DeepJSCC-NOMA over 3 dB in terms of PSNR.
Due to their flexibility and dynamic coverage capabilities, Unmanned Aerial Vehicles (UAVs) have emerged as vital platforms for emergency communication in disaster-stricken areas. However, the complex channel conditions in high-speed mobile scenarios significantly impact the reliability and efficiency of traditional communication systems. This paper presents an intelligent emergency communication framework that integrates Orthogonal Time Frequency Space (OTFS) modulation, semantic communication, and a diffusion-based denoising module to address these challenges. OTFS ensures robust communication under dynamic channel conditions due to its superior anti-fading characteristics and adaptability to rapidly changing environments. Semantic communication further enhances transmission efficiency by focusing on key information extraction and reducing data redundancy. Moreover, a diffusion-based channel denoising module is proposed to leverage the gradual noise reduction process and statistical noise modeling, optimizing the accuracy of semantic information recovery. Experimental results demonstrate that the proposed solution significantly improves link stability and transmission performance in high-mobility UAV scenarios, achieving at least a 3dB SNR gain over existing methods.
In this paper, we investigate a joint source-channel encoding (JSCE) scheme in an intelligent reflecting surface (IRS)-assisted multi-user semantic communication system. Semantic encoding not only compresses redundant information, but also enhances information orthogonality in a semantic feature space. Meanwhile, the IRS can adjust the spatial orthogonality, enabling concurrent multi-user semantic communication in densely deployed wireless networks to improve spectrum efficiency. We aim to maximize the users' semantic throughput by jointly optimizing the users' scheduling, the IRS's passive beamforming, and the semantic encoding strategies. To tackle this non-convex problem, we propose an explainable deep neural network-driven deep reinforcement learning (XD-DRL) framework. Specifically, we employ a deep neural network (DNN) to serve as a joint source-channel semantic encoder, enabling transmitters to extract semantic features from raw images. By leveraging structural similarity, we assign some DNN weight coefficients as the IRS's phase shifts, allowing simultaneous optimization of IRS's passive beamforming and DNN training. Given the IRS's passive beamforming and semantic encoding strategies, user scheduling is optimized using the DRL method. Numerical results validate that our JSCE scheme achieves superior semantic throughput compared to the conventional schemes and efficiently reduces the semantic encoder's mode size in multi-user scenarios.
In this paper, the problem of maximization of the minimum equivalent rate in a unmanned-aerial-vehicle (UAV)-based multi-user semantic communication system is investigated. In the considered model, a multi-antenna UAV employs semantic extraction techniques to compress the data ready to be sent to the users, which are equipped with fluid antennas. Our aim is to jointly optimize the trajectory of the UAV, the transmit beamforming and the semantic compression rate at the UAV, as well as the selection of activated ports in fluid antenna system (FAS), to maximize the minimum equivalent transmission rate among all user. An alternating algorithm is designed to solve the problem. Simulation results validate the effectiveness of the proposed algorithm.
Generative semantic communication models are reshaping semantic communication frameworks by moving beyond pixel-wise optimization to align with human perception. However, many existing approaches prioritize image-level perceptual quality, often neglecting alignment with downstream tasks, which can lead to suboptimal semantic representation. This paper introduces an Ultra-Low Bitrate Semantic Communication (ULBSC) system that employs a conditional generative model and a learnable condition codebook.By integrating saliency conditions and image-level semantic information, the proposed method enables high-perceptual-quality and controllable task-oriented image transmission. Recognizing shared patterns among objects, we propose a codebook-assisted condition transmission method, integrated with joint source-channel coding (JSCC)-based text transmission to establish ULBSC. The codebook serves as a knowledge base, reducing communication costs to achieve ultra-low bitrate while enhancing robustness against noise and inaccuracies in saliency detection. Simulation results indicate that, under ultra-low bitrate conditions with an average compression ratio of 0.57Z%o, the proposed system delivers superior visual quality compared to traditional JSCC techniques and achieves higher saliency similarity between the generated and source images compared to state-of-the-art generative semantic communication methods.
The integration of sensing and communication (ISAC) is pivotal for the Metaverse but faces challenges like high data volume and privacy concerns. This paper proposes a novel integrated sensing, computing, and semantic communication (ISCSC) framework, which uses semantic communication to transmit only contextual information, reducing data overhead and enhancing efficiency. To address the sensitivity of semantic communication to channel conditions, fluid antennas (FAs) are introduced, enabling dynamic adaptability. The FA-enabled ISCSC framework considers multiple users and extended targets composed of a series of scatterers, formulating a joint optimization problem to maximize the data rate while ensuring sensing accuracy and meeting computational and power constraints. An alternating optimization (AO) method decomposes the problem into subproblems for ISAC beamforming, FA positioning, and semantic extraction. Simulations confirm the framework's effectiveness in improving data rates and sensing performance.