PyTorchKR Papers

최신 논문

총 3,337편
태그·기간 등 상세 필터

카테고리 탐색

로그인 후 이 태그 구독

arXiv:2004.14953

Soft Affirmative Action and Minority Recruitment

We study search, evaluation, and selection of candidates of unknown quality for a position. We examine the effects of "soft" affirmative action policies increasing the relative percentage of minority candidates in the candidate pool. We show that, while meant to encourage minority hiring, such policies may backfire if the evaluation of minority candidates is noisier than that of non-minorities. This may occur even if minorities are at least as qualified and as valuable as non-minorities. The results provide a possible explanation for why certain soft affirmative action policies have proved counterproductive, even in the absence of (implicit) biases.

arXiv:2004.11070

Millimeter-Wave Full-Duplex UAV Relay: Joint Positioning, Beamforming, and Power Control

In this paper, a full-duplex unmanned aerial vehicle (FD-UAV) relay is employed to increase the communication capacity of millimeter-wave (mmWave) networks. Large antenna arrays are equipped at the source node (SN), destination node (DN), and FD-UAV relay to overcome the high path loss of mmWave channels and to help mitigate the self-interference at the FD-UAV relay. Specifically, we formulate a problem for maximization of the achievable rate from the SN to the DN, where the UAV position, analog beamforming, and power control are jointly optimized. Since the problem is highly non-convex and involves high-dimensional, highly coupled variable vectors, we first obtain the conditional optimal position of the FD-UAV relay for maximization of an approximate upper bound on the achievable rate in closed form, under the assumption of a line-of-sight (LoS) environment and ideal beamforming. Then, the UAV is deployed to the position which is closest to the conditional optimal position and yields LoS paths for both air-to-ground links. Subsequently, we propose an alternating interference suppression (AIS) algorithm for the joint design of the beamforming vectors and the power control variables. In each iteration, the beamforming vectors are optimized for maximization of the beamforming gains of the target signals and the successive reduction of the interference, where the optimal power control variables are obtained in closed form. Our simulation results confirm the superiority of the proposed positioning, beamforming, and power control method compared to three benchmark schemes. Furthermore, our results show that the proposed solution closely approaches a performance upper bound for mmWave FD-UAV systems.

arXiv:2004.07793

Trajectory Planning and Control for Automatic Docking of ASVs with Full-Scale Experiments

We propose a method for performing automatic docking of a small autonomous surface vehicle (ASV) by interconnecting an optimization-based trajectory planner with a dynamic positioning (DP) controller for trajectory tracking. The trajectory planner provides collision-free trajectories by considering a map with static obstacles, and produces feasible trajectories through inclusion of a mathematical model of the ASV and its actuators. The DP controller tracks the time-parametrized position, velocity and acceleration produced by the trajectory planner using proportional-integral-derivative feedback with velocity and acceleration feed forward. The method's performance is tested on a small ASV in confined waters in Trondheim, Norway. The ASV performs collision-free docking maneuvers with respect to static obstacles when tracking the generated reference trajectories and achieves successful docking.

arXiv:2003.10502

A closed-form solution for optimal mean-reverting trading strategies

When prices reflect all available information, they oscillate around an equilibrium level. This oscillation is the result of the temporary market impact caused by waves of buyers and sellers. This price behavior can be approximated through an Ornstein-Uhlenbeck (O-U) process. Market makers provide liquidity in an attempt to monetize this oscillation. They enter a long position when a security is priced below its estimated equilibrium level, and they enter a short position when a security is priced above its estimated equilibrium level. They hold that position until one of three outcomes occur: (1) they achieve the targeted profit; (2) they experience a maximum tolerated loss; (3) the position is held beyond a maximum tolerated horizon. All market makers are confronted with the problem of defining profit-taking and stop-out levels. More generally, all execution traders acting on behalf of a client must determine at what levels an order must be fulfilled. Those optimal levels can be determined by maximizing the trader's Sharpe ratio in the context of O-U processes via Monte Carlo experiments. This paper develops an analytical framework and derives those optimal levels by using the method of heat potentials.

arXiv:2003.07407

Nonlinear Stochastic Estimators on the Special Euclidean Group SE(3) using Uncertain IMU and Vision Measurements

Two novel robust nonlinear stochastic full pose (i.e, attitude and position) estimators on the Special Euclidean Group SE(3) are proposed using the available uncertain measurements. The resulting estimators utilize the basic structure of the deterministic pose estimators adopting it to the stochastic sense. The proposed estimators for six degrees of freedom (DOF) pose estimations consider the group velocity vectors to be contaminated with constant bias and Gaussian random noise, unlike nonlinear deterministic pose estimators which disregard the noise component in the estimator derivations. The proposed estimators ensure that the closed loop error signals are semi-globally uniformly ultimately bounded in mean square. The efficiency and robustness of the proposed estimators are demonstrated by the numerical results which test the estimators against high levels of noise and bias associated with the group velocity and body-frame measurements and large initialization error. Keywords: Nonlinear stochastic pose filter, pose observer, position, attitude, Ito, stochastic differential equations, Brownian motion process, adaptive estimate, feature, inertial measurement unit, inertial vision system, 6 DOF, IMU, SE(3), SO(3), orientation, landmark, Gaussian, noise.

arXiv:2003.07312

Learning Driver Behaviors Using A Gaussian Process Augmented State-Space Model

An inference method for Gaussian process augmented state-space models are presented. This class of grey-box models enables domain knowledge to be incorporated in the inference process to guarantee a minimum of performance, still they are flexible enough to permit learning of partially unknown model dynamics and inputs. To facilitate online (recursive) inference of the model a sparse approximation of the Gaussian process based upon inducing points is presented. To illustrate the application of the model and the inference method, an example where it is used to track the position and learn the behavior of a set of cars passing through an intersection, is presented. Compared to the case when only the state-space model is used, the use of the augmented state-space model gives both a reduced estimation error and bias.

arXiv:2003.07220

Genome Variant Calling with a Deep Averaging Network

Variant calling, the problem of estimating whether a position in a DNA sequence differs from a reference sequence, given noisy, redundant, overlapping short sequences that cover that position, is fundamental to genomics. We propose a deep averaging network designed specifically for variant calling. Our model takes into account the independence of each short input read sequence by transforming individual reads through a series of convolutional layers, limiting the communication between individual reads to averaging and concatenating operations. Training and testing on the precisionFDA Truth Challenge (pFDA), we match state of the art overall 99.89 F1 score. Genome datasets exhibit extreme skew between easy examples and those on the decision boundary. We take advantage of this property to converge models at 5x the speed of standard epoch-based training by skipping easy examples during training. To facilitate future work, we release our code, trained models and pre-processed public domain datasets.

arXiv:2002.09452

Massive MIMO Channel Measurements and Achievable Rates in a Residential Area

In this paper we present a measurement set-up for massive MIMO channel sounding that shows very good long-term phase stability. Initial measurements were performed in a residential area to evaluate different conventional precoding schemes such as maximum ratio transmission and phase only precoding. A massive amount of data points was collected, with 924 times 64 complex channel weights per data point. Each data point is position-tagged using differential GPS with real-time kinematik, achieving better than 35cm position accuracy in more than 90% of the collected data points, making this dataset a rich resource for, e.g., further studying machine learning based, data-driven approaches in wireless communications.

arXiv:2002.08531

The Fair Basis: Funding and capital in the reduced form framework

A negative basis trade enters a long bond position and buys protection on the issuer of the bond through credit default swap (CDS), aiming at arbitrage profit due to the bond-CDS basis. To classic reduced form model theorists, the existence of the basis is an abnormality or merely liquidity noise. Such a view, however, fails to explain large basis trading losses incurred during the financial crisis. Employing a bond continuously hedged by CDS under a dynamic spread model with bond repo financing, we find that there is unhedged and unhedgeable residual jump to default risk that can't be diversified because of credit correlation. An economic capital approach has to apply and a charge on the use of capital follows. Together with the hedge funding cost, it allows us to better understand the basis's economics and to predict its fair level.

arXiv:2002.06279

A Comparison of Pooling Methods on LSTM Models for Rare Acoustic Event Classification

Acoustic event classification (AEC) and acoustic event detection (AED) refer to the task of detecting whether specific target events occur in audios. As long short-term memory (LSTM) leads to state-of-the-art results in various speech related tasks, it is employed as a popular solution for AEC as well. This paper focuses on investigating the dynamics of LSTM model on AEC tasks. It includes a detailed analysis on LSTM memory retaining, and a benchmarking of nine different pooling methods on LSTM models using 1.7M generated mixture clips of multiple events with different signal-to-noise ratios. This paper focuses on understanding: 1) utterance-level classification accuracy; 2) sensitivity to event position within an utterance. The analysis is done on the dataset for the detection of rare sound events from DCASE 2017 Challenge. We find max pooling on the prediction level to perform the best among the nine pooling approaches in terms of classification accuracy and insensitivity to event position within an utterance. To authors' best knowledge, this is the first kind of such work focused on LSTM dynamics for AEC tasks.

arXiv:2002.04849

Combining LoRaWAN and a New 3D Motion Model for Remote UAV Tracking

Over the last few years, the many uses of Unmanned Aerial Vehicles (UAVs) have captured the interest of both the scientific and the industrial communities. A typical scenario consists in the use of UAVs for surveillance or target-search missions over a wide geographical area. In this case, it is fundamental for the command center to accurately estimate and track the trajectories of the UAVs by exploiting their periodic state reports. In this work, we design an ad hoc tracking system that exploits the Long Range Wide Area Network (LoRaWAN) standard for communication and an extended version of the Constant Turn Rate and Acceleration (CTRA) motion model to predict drone movements in a 3D environment. Simulation results on a publicly available dataset show that our system can reliably estimate the position and trajectory of a UAV, significantly outperforming baseline tracking approaches.

arXiv:2002.03379

Optimal liquidation for a risk averse investor in a one-sided limit order book driven by a Levy process

In a one-sided limit order book, satisfying some realistic assumptions, where the unaffected price process follows a Levy process, we consider a market agent that wants to liquidate a large position of shares. We assume that the agent has constant absolute risk aversion and aims at maximising the expected utility of the cash position at the end of time. The agent is then faced with the problem of balancing the market risk and the cost of a rapid execution. In particular we are interested in how the agent should go about optimally submitting orders. Since liquidation normally takes place within a short period of time, modelling the risk as a Levy process should provide a realistic model with good statistical fit to observed market data, and thus the model should provide a realistic reflection of the agent's market risk. We reduce the optimisation problem to a deterministic two-dimensional singular problem, to which we are able to derive an explicit solution in terms of the model data. In particular we find an expression for the optimal intervention boundary, which completely characterise the optimal liquidation strategy.

arXiv:2001.00854

Re-synchronization using the Hand Preceding Model for Multi-modal Fusion in Automatic Continuous Cued Speech Recognition

Cued Speech (CS) is an augmented lip reading complemented by hand coding, and it is very helpful to the deaf people. Automatic CS recognition can help communications between the deaf people and others. Due to the asynchronous nature of lips and hand movements, fusion of them in automatic CS recognition is a challenging problem. In this work, we propose a novel re-synchronization procedure for multi-modal fusion, which aligns the hand features with lips feature. It is realized by delaying hand position and hand shape with their optimal hand preceding time which is derived by investigating the temporal organizations of hand position and hand shape movements in CS. This re-synchronization procedure is incorporated into a practical continuous CS recognition system that combines convolutional neural network (CNN) with multi-stream hidden markov model (MSHMM). A significant improvement of about 4.6\% has been achieved retaining 76.6\% CS phoneme recognition correctness compared with the state-of-the-art architecture (72.04\%), which did not take into account the asynchrony of multi-modal fusion in CS. To our knowledge, this is the first work to tackle the asynchronous multi-modal fusion in the automatic continuous CS recognition.

arXiv:1911.10149

Asset Price Bubbles in market models with proportional transaction costs

We study asset price bubbles in market models with proportional transaction costs $\lambda\in (0,1)$ and finite time horizon $T$ in the setting of [49]. By following [28], we define the fundamental value $F$ of a risky asset $S$ as the price of a super-replicating portfolio for a position terminating in one unit of the asset and zero cash. We then obtain a dual representation for the fundamental value by using the super-replication theorem of [50]. We say that an asset price has a bubble if its fundamental value differs from the ask-price $(1+\lambda)S$. We investigate the impact of transaction costs on asset price bubbles and show that our model intrinsically includes the birth of a bubble.

arXiv:1911.08409

3D Scene Based Beam Selection for mmWave Communications

In this paper, we present a novel framework of 3D scene based beam selection for mmWave communications that relies only on the environmental data and deep learning techniques. Different from other out-of-band side-information aided communication strategies, the proposed one fully utilizes the environmental information, e.g., the shape, the position, and even the materials of the surrounding buildings/cars/trees that are obtained from 3D scene reconstruction. Specifically, we build the neural networks with the input as point cloud of the 3D scene and the output as the beam indices. Compared with the LIDAR aided technique, the reconstructed 3D scene here is achieved from multiple images taken offline from cameras and thus significantly lowers down the cost and makes itself applicable for small mobile terminals. Simulation results show that the proposed 3D scene based beam selection can outperform the LIDAR method in terms of accuracy.

arXiv:1911.06814

X-ray Multimodal Intrinsic-Speckle-Tracking

We develop X-ray Multi-modal Intrinsic-Speckle-Tracking (MIST), a form of X-ray speckle-tracking that is able to recover both the position-dependent phase shift and the position-dependent small-angle X-ray scattering (SAXS) signal of a phase object. MIST is based on combining a Fokker-Planck description of paraxial X-ray optics, with an optical-flow formalism for X-ray speckle-tracking. Only two images need to be taken in the presence of the sample, corresponding to two different transverse positions of the speckle-generating membrane, in order to recover both the refractive and local-SAXS properties of the sample. Like the optical-flow X-ray phase-retrieval method which it generalises, the MIST method implicitly rather than explicitly tracks both the transverse motion and the diffusion of speckles that is induced by the presence of a sample. Application to X-ray synchrotron data shows the method to be efficient, rapid and stable.

arXiv:1911.06145

Neutron Ghost Imaging

Ghost imaging is demonstrated using a poly-energetic reactor source of thermal neutrons. The method presented enables position resolution to be incorporated, into a variety of neutron instruments that are not position resolving. In an imaging context, ghost imaging can be beneficial for dose reduction and resolution enhancement. We also demonstrate a super-resolution variant of the method, namely a parallel form of neutron ghost imaging, with the ability to significantly increase the spatial resolution of a pixelated detector such as a CCD or CMOS camera. Extensions of our neutron ghost-imaging protocol are discussed in detail and include neutron ghost tomography, neutron ghost microscopy, dark-field neutron ghost imaging, and isotope-resolved color neutron ghost imaging via prompt gamma-ray bucket detection.

arXiv:1910.12804

Joint Indoor Localization and Navigation of UAVs for Network Formation Control

In this paper, we propose a joint indoor localization and navigation algorithm to enable a swarm of unmanned aerial vehicles (UAVs) to deploy in a specific spatial formation in indoor environments. In the envisioned scenario, we consider a static user acting as a central unit whose main task is to acquire all the UAV measurements carrying position-dependent information and to estimate the UAV positions when there is no existing infrastructure for positioning. Subsequently, the user exploits the estimated positions as inputs for the navigation control with the aim of deploying the UAVs in a desired formation in space (formation shaping). The user plans the trajectory of each UAV in real time, guaranteeing a safe navigation in the presence of obstacles. The proposed algorithm guides the UAVs to their desired final locations with good accuracy.

arXiv:1910.11946

sEMG-Based Natural Control Interface for a Variable Stiffness Transradial Hand Prosthesis

We propose, implement and evaluate a natural human-machine control interface for a variable stiffness transradial hand prosthesis that achieves tele-impedance control through surface electromyography (sEMG) signals. This interface, together with variable stiffness actuation (VSA), enables an amputee to modulate the impedance of the prosthetic limb to properly match the requirements of a task, while performing activities of daily living. Both the desired position and stiffness references are estimated through sEMG signals and used to control the VSA hand prosthesis. In particular, regulation of hand impedance is managed through the impedance measurements of the intact upper arm; this control takes place naturally and automatically as the amputee interacts with the environment, while position of the hand prosthesis is regulated intentionally by the amputee through the estimated position of the shoulder. The proposed approach is advantageous, since the impedance regulation takes place naturally without requiring amputees' attention and diminishing their functional capability. Consequently, the proposed interface is easy to use, does not require long training periods or interferes with the control of intact body segments. The performance of the approach is evaluated through human subject experiments where adequate estimation of references and independent control of position and stiffness are demonstrated.

arXiv:1910.08397

Translation position extracting in incoherent Fourier ptychography

Incoherent Fourier ptychography (IFP) is a newly developed super-resolution method, where accurate knowledge of translation positions is essential for image reconstruction.To release this limitation, we propose a preprocessing algorithm capable of extracting translation positions of the structure light directly from raw images of IFP, termed translation position extracting (TPE). TPE mainly involves two steps. First, the speckle parts mixed in the acquired intensities, in which the illumination motion is encoded, are isolated by intensity averaging and division. Then the cross-correlations of the speckle dataset are computed to determine the shift positions. TPE-IFP improves the previous IFP by removal of the requirement for prior knowledge of translation positions. Its effectiveness is demonstrated by obtaining high-quality super-resolution images in absence of location information in both simulations and experiments. By further relaxing the practical conditions, the proposed TPE may accelerate the applications of IFP. What is more, as a preprocessing approach, TPE might also contribute to the estimation of pattern positions for the similar speckle-based imaging.