In this work, we study the joint synchronization and localization (sync&loc) of Mobile Nodes (MNs) in ultra dense networks. In particular, we deploy an asymmetric timestamp exchange mechanism between MNs and Access Nodes (ANs), that, traditionally, provides us with information about the MNs' clock offset and skew. However, information about the distance between an AN and a MN is also intrinsic to the propagation delay experienced by exchanged time-stamps. In addition, we utilize Angle of Arrival (AoA) estimation to determine the incoming direction of time-stamp exchange packets, which gives further information about the MNs' location. Finally, we employ Bayesian Recursive Filtering (BRF) to combine the aforementioned pieces of information and jointly estimate the position and clock parameters of MNs. The simulation results indicate that the Root Mean Square Errors (RMSEs) of position and clock offset estimation are kept below 1 meter and 1 ns, respectively.
In the context of control of smart structures, we present an approach for state estimation of adaptive buildings with active load-bearing elements. For obtaining information on structural deformation, a system composed of a digital camera and optical emitters affixed to selected nodal points is introduced as a complement to conventional strain gauge sensors. Sensor fusion for this novel combination of sensors is carried out using a Kalman filter that operates on a reduced-order structure model obtained by modal analysis. Signal delay caused by image processing is compensated for by an out-of-sequence measurement update which provides for a flexible and modular estimation algorithm. Since the camera system is very precise, a self-tuning algorithm that adjusts model along with observer parameters is introduced to reduce discrepancy between system dynamic model and actual structural behavior. We further employ optimal sensor placement to limit the number of sensors to be placed on a given structure and examine the impact on estimation accuracy. A laboratory scale model of an adaptive high-rise with actuated columns and diagonal bracings is used for experimental demonstration of the proposed estimation scheme.
The total latency (TL) in ADS-B is the difference between the true TOA of the original position measured by the onboard GPS and the TOA in the ADS-B report at the GS. We processed the ADS-B reports extracted from live-data recorded at the Chicago to produce the results in this report. We observed that 99% of aircraft in our data set were broadcasting in non-UTC coupled mode. For these aircraft, STARS exclusively used ADS-B reports to update tracks when available. The calculated ULs for the non-UTC coupled ADS-B reports were well within the budget (-200 ms to +400 ms) allowed by the DO-260B MOPS. Moreover, the mean latencies from both methods were less than +/-50 ms. The latencies obtained from the MTPES method were observed to be in close agreement with the means from the ATPE method. About 1% of aircraft were broadcasting in UTC coupled mode. The reports from these aircraft were identified to have a non-compliant link version, causing STARS to reject these reports for tracking. Moreover, the reported position and TOA were found to be unsynchronized, which conflicts with the MOPS requirement for UTC coupled operation.
Current trends in autonomous vehicles and their applications indicates an increasing need in positioning at low battery and compute cost. Lidars provide accurate localization at the cost of high compute and power consumption which could be detrimental for drones. Modern requirements for autonomous drones such as No-Permit-No-Takeoff (NPNT) and applications restricting drones to a corridor require the infrastructure to constantly determine the location of the drone. Ultra Wide Band Radios (UWB) fulfill such requirements and offer high precision localization and fast position update rates at a fraction of the cost and battery consumption as compared to lidars and also have greater network availability than GPS in a dense forested campus or an indoor setting. We present in this paper a novel protocol and technique to localize a drone for such applications using a Time Difference of Arrival (TDoA) approach. This further increases the position update rates without sacrificing on accuracy and compare it to traditional methods
In this paper, we consider the optimisation of time varying functions by a network of agents with no gradient information. The proposed a novel method to estimate the gradient at each agent's position using only neighbour information. The gradient estimation is coupled with a formation controller, to minimise gradient estimation error and prevent agent collisions. Convergence results for the algorithm are provided for functions which satisfy the Polyak-Lojasiewicz inequality. Simulations and numerical results are provided to support the theoretical results.
Light-fidelity (LiFi) is a fully-networked bidirectional optical wireless communication (OWC) that is considered a promising solution for high-speed indoor connectivity. Unlike in conventional radio frequency wireless systems, the OWC channel is not isotropic, meaning that the device orientation affects the channel gain significantly. However, due to the lack of proper channel models for LiFi systems, many studies have assumed that the receiver is vertically upward and randomly located within the coverage area, which is not a realistic assumption from a practical point of view. In this paper, novel realistic and measurement-based channel models for indoor LiFi systems are proposed. Precisely, the statistics of the channel gain are derived for the case of randomly oriented stationary and mobile LiFi receivers. For stationary users, two channel models are proposed, namely, the modified truncated Laplace (MTL) model and the modified Beta (MB) model. For LiFi users, two channel models are proposed, namely, the sum of modified truncated Gaussian (SMTG) model and the sum of modified Beta (SMB) model. Based on the derived models, the impact of random orientation and spatial distribution of LiFi users is investigated, where we show that the aforementioned factors can strongly affect the channel gain and system performance.
We introduce and study the main properties of a class of convex risk measures that refine Expected Shortfall by simultaneously controlling the expected losses associated with different portions of the tail distribution. The corresponding adjusted Expected Shortfalls quantify risk as the minimum amount of capital that has to be raised and injected into a financial position $X$ to ensure that Expected Shortfall $ES_p(X)$ does not exceed a pre-specified threshold $g(p)$ for every probability level $p\in[0,1]$. Through the choice of the benchmark risk profile $g$ one can tailor the risk assessment to the specific application of interest. We devote special attention to the study of risk profiles defined by the Expected Shortfall of a benchmark random loss, in which case our risk measures are intimately linked to second-order stochastic dominance.
This paper extends our previous work in [1],[2], on optimal scheduling of autonomous vehicle arrivals at intersections, from one to a grid of intersections. A scalable distributed Mixed Integer Linear Program (MILP) is devised that solves the scheduling problem for a grid of intersections. A computational control node is allocated to each intersection and regularly receives position and velocity information from subscribed vehicles. Each node assigns an intersection access time to every subscribed vehicle by solving a local MILP. Neighboring intersections will coordinate with each other in real-time by sharing their solutions for vehicles' access times with each other. Our proposed approach is applied to a grid of nine intersections and its positive impact on traffic flow and vehicles' fuel economy is demonstrated in comparison to conventional intersection control scenarios.
In this article we design a backstepping control law based on geometric principles to swing up a spherical pendulum mounted on a moving quadrotor. The available degrees of freedom in the control vector also permit us to position the plane of the quadrotor parallel to the ground. The problem addressed here is, indeed, novel and has many practical applications which arise during the transport of a payload mounted on top of a quadrotor. The modeling and control law are coordinate-free and thus avoid singularity issues. The geometric treatment of the problem greatly simplifies both the modeling and control law for the system. The control action is verified and supported by numerical experiments for aggressive manoeuvres starting very close to the downward stable equilibrium position of the pendulum.
In applications such as seismic acquisition, the position information of sensor nodes, that are deployed in a linear topology, is desired with sub-meter accuracy in the presence of a limited number of anchor nodes. This can be achieved with antenna arrays via mm-wave cooperative localization, whose performance limits are derived in this letter. The number of anchor nodes is seen to have a stronger impact than the number of antenna elements in the anchor nodes. Succinct closed-form expressions for the position error bound are also obtained for 1-hop and 2-hop cooperative localization, where sub-meter accuracy is perceived over several hundred nodes.
We propose a new secure transmission scheme which uses directional modulation (DM) with artificial noise and is aided by the intelligent reflecting surface (IRS). Specifically, the direct path and IRS-enabled reflect path carry the same confidential signal and thus can be coherently added at the desired position to maximize the total received power, while the received signals at other positions are distorted. We derive a closed-form expression for the secrecy rate achieved by the proposed scheme. Using simulation results, we show that the proposed scheme can achieve two-dimensional secure transmission at a specific position. Also, its performance advantage over the conventional DM scheme becomes more pronounced as the number of reflecting elements at the IRS increases.
We present a flexible family of 3D mobility models suitable for unmanned aerial vehicles (UAV). Based on stochastic differential equations, the models offer a unique property of explicitly incorporating the mobility control mechanism and environmental perturbation, while enabling tractable steady state solutions for properties such as position and connectivity. Specifically, motivated by UAV flight data, for a symmetric mobility model with an arbitrary control mechanism, we derive the steady state distribution of the distance from the target position. We provide closed form expressions for the special cases of the Ornstein-Uhlenbeck (OU) process and on-off control (OC). We extend the model to incorporate imperfect positioning and asymmetric control. For a practically relevant scenario of partial symmetry (such as in the x-y plane), we present steady state position results for the OU control. Building on these results, we derive UAV connectivity probability results based on a SNR criterion in a Rayleigh fading environment.
Reconfigurable intelligent surface (RIS) technology is a promising method to enhance the device-to-device (D2D) communications. To maximize the sum rate of the cellular and D2D networks, a joint optimization of the position and the phase shift of RIS in D2D communications is considered in this paper. To solve the non-convex sum rate maximum problem, we propose a novel convolutional neural network (CNN) based deep Q-network (DQN) that jointly optimizes the RIS position and its phase shift with lower complexity. Numerical results illustrate that the proposed algorithm can achieve higher sum rate compared to the benchmark algorithms, meanwhile meeting the quality of service (QoS) requirements at D2D receivers and the base station (BS).
A novel location-aware beamforming scheme for millimeter wave communication is proposed for line of sight (LOS) and low mobility scenarios, in which computer vision is introduced to derive the required position or spatial angular information from the image or video captured by camera(s) co-located with mmWave antenna array at base stations. A wireless coverage model is built to investigate the coverage performance and influence of positioning accuracy achieved by convolutional neural network (CNN) for image processing. In addition, videos could be intentionally blurred, or even low-resolution videos could be directly applied, to protect users' privacy with acceptable positioning precision, lower computation complexity and lower camera cost. It is proved by simulations that the beamforming scheme is practicable and the mainstream CNN we employed is sufficient in both aspects of beam directivity accuracy and processing speed in frame per second.
Millimeter-wave is one of the technologies powering the new generation of wireless communication systems. To compensate the high path-loss, millimeter-wave devices need to use highly directional antennas. Consequently, beam misalignment causes strong performance degradation reducing the link throughput or even provoking a complete outage. Conventional solutions, e.g. IEEE 802.11ad, propose the usage of additional training sequences to track beam misalignment. These methods however introduce significant overhead especially in dynamic scenarios. In this paper we propose a beamforming scheme that can reduce this overhead. First, we propose an algorithm to design a codebook suitable for mobile scenarios. Secondly, we propose a blind beam tracking algorithm based on particle filter, which describes the angular position of the devices with a posterior density function constructed by particles. The proposed scheme reduces by more than 80% the overhead caused by additional training sequences.
We present a simple yet efficient supervised machine learning algorithm that is designed for the GNSS position time series prediction. This algorithm has four steps. First, the mean value of the time series is subtracted from it. Second, the trends in the time series are removed. Third, wavelets are used to separate the high and low frequencies. And fourth, a number of frequencies are derived and used for finding the weights between the hidden and the output layers, using the product of the identity and sine and cosine functions. The role of the observation precision is taken into account in this algorithm. A large-scale study of three thousand position times series of GNSS stations across the globe is presented. Seventeen different machine learning algorithms are examined. The accuracy levels of these algorithms are checked against the rigorous statistical method of Theta. It is shown that the most accurate machine learning algorithm is the method we present, in addition to being faster. Two applications of the algorithm are presented. In the first application, it is shown that the outliers and anomalies in a time series can be detected and removed by the proposed algorithm. In a large scale study, ten other methods of time series outlier detection are compared with the proposed algorithm. The study reveals that the proposed algorithm is approximately 3.22 percent more accurate in detecting outliers. In the second application, the suitability of the algorithm for earthquake prediction is investigated. A case study is presented for the Tohoku 2011 earthquake. It is shown that this earthquake could have been predicted approximately 2 hours before its happening, solely based on each of the 845 GEONET station time series. Comparison with four different studies show the improvement in prediction of the time of the earthquake.
We investigate the accuracy of conventional machine learning aided algorithms for the prediction of lateral land movement in an area using the precise position time series of permanent GNSS stations. The machine learning algorithms that are used are tantamount to the ones used in [1], except for the radial basis functions, i.e. multilayer perceptron, Bayesian neural network, Gaussian processes, k-nearest neighbor, generalized regression neural network, classification and regression trees, and support vector regression. A comparative analysis is presented in which the accuracy level of the mentioned machine learning methods is checked against each other. It is shown that the most accurate method for both of the components of the time series is the Gaussian processes, achieving up to 9.5 centimeters in accuracy.
We analyze an optimal trade execution problem in a financial market with stochastic liquidity. To this end we set up a limit order book model in which both order book depth and resilience evolve randomly in time. Trading is allowed in both directions and at discrete points in time. We derive an explicit recursion that, under certain structural assumptions, characterizes minimal execution costs. We also discuss several qualitative aspects of optimal strategies, such as existence of profitable round trips or closing the position in one go, and compare our findings with the literature.
In this paper, a received signal strength assisted Perspective-three-Point positioning algorithm (R-P3P) is proposed for visible light positioning (VLP) systems. The basic idea of R-P3P is to joint visual and strength information to estimate the receiver position using 3 LEDs regardless of the LEDs' orientations. R-P3P first utilizes visual information captured by the camera to estimate the incidence angles of visible lights. Then, R-P3P calculates the candidate distances between the LEDs and the receiver based on the law of cosines and the Wu-Ritt's zero decomposition method. Based on the incidence angles, the candidate distances and the physical characteristics of the LEDs, R-P3P can select the exact distances from all the candidate distances. Finally, the linear least square (LLS) method is employed to estimate the position of the receiver. Due to the combination of visual and strength information of visible light signals, R-P3P can achieve high accuracy using 3 LEDs regardless of the LEDs' orientations. Simulation results show that R-P3P can achieve positioning accuracy within 10 cm over 70% indoor area with low complexity regardless of LEDs orientations.
Feature-based physical layer authentication (PLA) schemes, using position-specific channel characteristics as identifying features, can provide lightweight protection against impersonation attacks in overhead-limited applications like e.g., mission-critical and low-latency scenarios. However, with PLA-aware attack strategies, an attacker can maximize the probability of successfully impersonating the legitimate devices. In this paper, we provide worst-case detection performance bounds under such strategies for a distributed PLA scheme that is based on the channel-state information (CSI) observed at multiple distributed remote radio-heads. This distributed setup exploits the multiple-channel diversity for enhanced detection performance and mimics distributed antenna architectures considered for 4G and 5G radio access networks. We consider (i) a power manipulation attack, in which a single-antenna attacker adopts optimal transmit power and phase; and (ii) an optimal spatial position attack. Interestingly, our results show that the attacker can achieve close-to-optimal success probability with only statistical CSI, which significantly strengthens the relevance of our results for practical scenarios. Furthermore, our results show that, by distributing antennas to multiple radio-heads, the worst-case missed detection probability can be reduced by 4 orders of magnitude without increasing the total number of antennas, illustrating the superiority of distributed PLA over a co-located antenna setup.