Plenty of face detection and recognition methods have been proposed and got delightful results in decades. Common face recognition pipeline consists of: 1) face detection, 2) face alignment, 3) feature extraction, 4) similarity calculation, which are separated and independent from each other. The separated face analyzing stages lead the model redundant calculation and are hard for end-to-end training. In this paper, we proposed a novel end-to-end trainable convolutional network framework for face detection and recognition, in which a geometric transformation matrix was directly learned to align the faces, instead of predicting the facial landmarks. In training stage, our single CNN model is supervised only by face bounding boxes and personal identities, which are publicly available from WIDER FACE \cite{Yang2016} dataset and CASIA-WebFace \cite{Yi2014} dataset. Tested on Face Detection Dataset and Benchmark (FDDB) \cite{Jain2010} dataset and Labeled Face in the Wild (LFW) \cite{Huang2007} dataset, we have achieved 89.24\% recall for face detection task and 98.63\% verification accuracy for face recognition task simultaneously, which are comparable to state-of-the-art results.
We present a new Cascaded Shape Regression (CSR) architecture, namely Dynamic Attention-Controlled CSR (DAC-CSR), for robust facial landmark detection on unconstrained faces. Our DAC-CSR divides facial landmark detection into three cascaded sub-tasks: face bounding box refinement, general CSR and attention-controlled CSR. The first two stages refine initial face bounding boxes and output intermediate facial landmarks. Then, an online dynamic model selection method is used to choose appropriate domain-specific CSRs for further landmark refinement. The key innovation of our DAC-CSR is the fault-tolerant mechanism, using fuzzy set sample weighting for attention-controlled domain-specific model training. Moreover, we advocate data augmentation with a simple but effective 2D profile face generator, and context-aware feature extraction for better facial feature representation. Experimental results obtained on challenging datasets demonstrate the merits of our DAC-CSR over the state-of-the-art.
Recently, Deep Convolution Networks (DCNNs) have been applied to the task of face alignment and have shown potential for learning improved feature representations. Although deeper layers can capture abstract concepts like pose, it is difficult to capture the geometric relationships among the keypoints in DCNNs. In this paper, we propose a novel convolution-deconvolution network for facial keypoint detection. Our model predicts the 2D locations of the keypoints and their individual visibility along with 3D head pose, while exploiting the spatial relationships among different keypoints. Different from existing approaches of modeling these relationships, we propose learnable transform functions which captures the relationships between keypoints at feature level. However, due to extensive variations in pose, not all of these relationships act at once, and hence we propose, a pose-based routing function which implicitly models the active relationships. Both transform functions and the routing function are implemented through convolutions in a multi-task framework. Our approach presents a single-shot keypoint detection method, making it different from many existing cascade regression-based methods. We also show that learning these relationships significantly improve the accuracy of keypoint detections for in-the-wild face images from challenging datasets such as AFW and AFLW.
In this paper, we present a random-forest based fast cascaded regression model for face alignment, via a novel local feature. Our proposed local lightweight feature, namely intimacy definition feature (IDF), is more discriminative than landmark pose-indexed feature, more efficient than histogram of oriented gradients (HOG) feature and scale-invariant feature transform (SIFT) feature, and more compact than the local binary feature (LBF). Experimental results show that our approach achieves state-of-the-art performance when tested on the most challenging datasets. Compared with an LBF-based algorithm, our method can achieve about two times the speed-up and more than 20% improvement, in terms of alignment accuracy measurement, and save an order of magnitude of memory requirement.
Majority of the face recognition algorithms use query faces captured from uncontrolled, in the wild, environment. Often caused by the cameras limited capabilities, it is common for these captured facial images to be blurred or low resolution. Super resolution algorithms are therefore crucial in improving the resolution of such images especially when the image size is small requiring enlargement. This paper aims to demonstrate the effect of one of the state-of-the-art algorithms in the field of image super resolution. To demonstrate the functionality of the algorithm, various before and after 3D face alignment cases are provided using the images from the Labeled Faces in the Wild (lfw). Resulting images are subject to testing on a closed set face recognition protocol using unsupervised algorithms with high dimension extracted features. The inclusion of super resolution algorithm resulted in significant improved recognition rate over recently reported results obtained from unsupervised algorithms.
Blind deblurring consists a long studied task, however the outcomes of generic methods are not effective in real world blurred images. Domain-specific methods for deblurring targeted object categories, e.g. text or faces, frequently outperform their generic counterparts, hence they are attracting an increasing amount of attention. In this work, we develop such a domain-specific method to tackle deblurring of human faces, henceforth referred to as face deblurring. Studying faces is of tremendous significance in computer vision, however face deblurring has yet to demonstrate some convincing results. This can be partly attributed to the combination of i) poor texture and ii) highly structure shape that yield the contour/gradient priors (that are typically used) sub-optimal. In our work instead of making assumptions over the prior, we adopt a learning approach by inserting weak supervision that exploits the well-documented structure of the face. Namely, we utilise a deep network to perform the deblurring and employ a face alignment technique to pre-process each face. We additionally surpass the requirement of the deep network for thousands training samples, by introducing an efficient framework that allows the generation of a large dataset. We utilised this framework to create 2MF2, a dataset of over two million frames. We conducted experiments with real world blurred facial images and report that our method returns a result close to the sharp natural latent image.
We present a framework for robust face detection and landmark localisation of faces in the wild, which has been evaluated as part of `the 2nd Facial Landmark Localisation Competition'. The framework has four stages: face detection, bounding box aggregation, pose estimation and landmark localisation. To achieve a high detection rate, we use two publicly available CNN-based face detectors and two proprietary detectors. We aggregate the detected face bounding boxes of each input image to reduce false positives and improve face detection accuracy. A cascaded shape regressor, trained using faces with a variety of pose variations, is then employed for pose estimation and image pre-processing. Last, we train the final cascaded shape regressor for fine-grained landmark localisation, using a large number of training samples with limited pose variations. The experimental results obtained on the 300W and Menpo benchmarks demonstrate the superiority of our framework over state-of-the-art methods.
In this work we present a face alignment pipeline based on two novel methods: weighted splitting for K-cluster Regression Forests and 3D Affine Pose Regression for face shape initialization. Our face alignment method is based on the Local Binary Feature framework, where instead of standard regression forests and pixel difference features used in the original method, we use our K-cluster Regression Forests with Weighted Splitting (KRFWS) and Pyramid HOG features. We also use KRFWS to perform Affine Pose Regression (APR) and 3D-Affine Pose Regression (3D-APR), which intend to improve the face shape initialization. APR applies a rigid 2D transform to the initial face shape that compensates for inaccuracy in the initial face location, size and in-plane rotation. 3D-APR estimates the parameters of a 3D transform that additionally compensates for out-of-plane rotation. The resulting pipeline, consisting of APR and 3D-APR followed by face alignment, shows an improvement of 20% over standard LBF on the challenging IBUG dataset, and state-of-theart accuracy on the entire 300-W dataset.
Face alignment has witnessed substantial progress in the last decade. One of the recent focuses has been aligning a dense 3D face shape to face images with large head poses. The dominant technology used is based on the cascade of regressors, e.g., CNN, which has shown promising results. Nonetheless, the cascade of CNNs suffers from several drawbacks, e.g., lack of end-to-end training, hand-crafted features and slow training speed. To address these issues, we propose a new layer, named visualization layer, that can be integrated into the CNN architecture and enables joint optimization with different loss functions. Extensive evaluation of the proposed method on multiple datasets demonstrates state-of-the-art accuracy, while reducing the training time by more than half compared to the typical cascade of CNNs. In addition, we compare multiple CNN architectures with the visualization layer to further demonstrate the advantage of its utilization.
We propose an Ensemble of Robust Constrained Local Models for alignment of faces in the presence of significant occlusions and of any unknown pose and expression. To account for partial occlusions we introduce, Robust Constrained Local Models, that comprises of a deformable shape and local landmark appearance model and reasons over binary occlusion labels. Our occlusion reasoning proceeds by a hypothesize-and-test search over occlusion labels. Hypotheses are generated by Constrained Local Model based shape fitting over randomly sampled subsets of landmark detector responses and are evaluated by the quality of face alignment. To span the entire range of facial pose and expression variations we adopt an ensemble of independent Robust Constrained Local Models to search over a discretized representation of pose and expression. We perform extensive evaluation on a large number of face images, both occluded and unoccluded. We find that our face alignment system trained entirely on facial images captured "in-the-lab" exhibits a high degree of generalization to facial images captured "in-the-wild". Our results are accurate and stable over a wide spectrum of occlusions, pose and expression variations resulting in excellent performance on many real-world face datasets.
Our goal is to design architectures that retain the groundbreaking performance of CNNs for landmark localization and at the same time are lightweight, compact and suitable for applications with limited computational resources. To this end, we make the following contributions: (a) we are the first to study the effect of neural network binarization on localization tasks, namely human pose estimation and face alignment. We exhaustively evaluate various design choices, identify performance bottlenecks, and more importantly propose multiple orthogonal ways to boost performance. (b) Based on our analysis, we propose a novel hierarchical, parallel and multi-scale residual architecture that yields large performance improvement over the standard bottleneck block while having the same number of parameters, thus bridging the gap between the original network and its binarized counterpart. (c) We perform a large number of ablation studies that shed light on the properties and the performance of the proposed block. (d) We present results for experiments on the most challenging datasets for human pose estimation and face alignment, reporting in many cases state-of-the-art performance. Code can be downloaded from https://www.adrianbulat.com/binary-cnn-landmarks
Face alignment and 3D face reconstruction are traditionally accomplished as separated tasks. By exploring the strong correlation between 2D landmarks and 3D shapes, in contrast, we propose a joint face alignment and 3D face reconstruction method to simultaneously solve these two problems for 2D face images of arbitrary poses and expressions. This method, based on a summation model of 3D faces and cascaded regression in 2D and 3D shape spaces, iteratively and alternately applies two cascaded regressors, one for updating 2D landmarks and the other for 3D shape. The 3D shape and the landmarks are correlated via a 3D-to-2D mapping matrix, which is updated in each iteration to refine the location and visibility of 2D landmarks. Unlike existing methods, the proposed method can fully automatically generate both pose-and-expression-normalized (PEN) and expressive 3D faces and localize both visible and invisible 2D landmarks. Based on the PEN 3D faces, we devise a method to enhance face recognition accuracy across poses and expressions. Both linear and nonlinear implementations of the proposed method are presented and evaluated in this paper. Extensive experiments show that the proposed method can achieve the state-of-the-art accuracy in both face alignment and 3D face reconstruction, and benefit face recognition owing to its reconstructed PEN 3D face.
In this paper, we propose Deep Alignment Network (DAN), a robust face alignment method based on a deep neural network architecture. DAN consists of multiple stages, where each stage improves the locations of the facial landmarks estimated by the previous stage. Our method uses entire face images at all stages, contrary to the recently proposed face alignment methods that rely on local patches. This is possible thanks to the use of landmark heatmaps which provide visual information about landmark locations estimated at the previous stages of the algorithm. The use of entire face images rather than patches allows DAN to handle face images with large variation in head pose and difficult initializations. An extensive evaluation on two publicly available datasets shows that DAN reduces the state-of-the-art failure rate by up to 70%. Our method has also been submitted for evaluation as part of the Menpo challenge.
The de facto algorithm for facial landmark estimation involves running a face detector with a subsequent deformable model fitting on the bounding box. This encompasses two basic problems: i) the detection and deformable fitting steps are performed independently, while the detector might not provide best-suited initialisation for the fitting step, ii) the face appearance varies hugely across different poses, which makes the deformable face fitting very challenging and thus distinct models have to be used (\eg, one for profile and one for frontal faces). In this work, we propose the first, to the best of our knowledge, joint multi-view convolutional network to handle large pose variations across faces in-the-wild, and elegantly bridge face detection and facial landmark localisation tasks. Existing joint face detection and landmark localisation methods focus only on a very small set of landmarks. By contrast, our method can detect and align a large number of landmarks for semi-frontal (68 landmarks) and profile (39 landmarks) faces. We evaluate our model on a plethora of datasets including standard static image datasets such as IBUG, 300W, COFW, and the latest Menpo Benchmark for both semi-frontal and profile faces. Significant improvement over state-of-the-art methods on deformable face tracking is witnessed on 300VW benchmark. We also demonstrate state-of-the-art results for face detection on FDDB and MALF datasets.
We show how a simple convolutional neural network (CNN) can be trained to accurately and robustly regress 6 degrees of freedom (6DoF) 3D head pose, directly from image intensities. We further explain how this FacePoseNet (FPN) can be used to align faces in 2D and 3D as an alternative to explicit facial landmark detection for these tasks. We claim that in many cases the standard means of measuring landmark detector accuracy can be misleading when comparing different face alignments. Instead, we compare our FPN with existing methods by evaluating how they affect face recognition accuracy on the IJB-A and IJB-B benchmarks: using the same recognition pipeline, but varying the face alignment method. Our results show that (a) better landmark detection accuracy measured on the 300W benchmark does not necessarily imply better face recognition accuracy. (b) Our FPN provides superior 2D and 3D face alignment on both benchmarks. Finally, (c), FPN aligns faces at a small fraction of the computational cost of comparably accurate landmark detectors. For many purposes, FPN is thus a far faster and far more accurate face alignment method than using facial landmark detectors.
We present a minimalistic but effective neural network that computes dense facial correspondences in highly unconstrained RGB images. Our network learns a per-pixel flow and a matchability mask between 2D input photographs of a person and the projection of a textured 3D face model. To train such a network, we generate a massive dataset of synthetic faces with dense labels using renderings of a morphable face model with variations in pose, expressions, lighting, and occlusions. We found that a training refinement using real photographs is required to drastically improve the ability to handle real images. When combined with a facial detection and 3D face fitting step, we show that our approach outperforms the state-of-the-art face alignment methods in terms of accuracy and speed. By directly estimating dense correspondences, we do not rely on the full visibility of sparse facial landmarks and are not limited to the model space of regression-based approaches. We also assess our method on video frames and demonstrate successful per-frame processing under extreme pose variations, occlusions, and lighting conditions. Compared to existing 3D facial tracking techniques, our fitting does not rely on previous frames or frontal facial initialization and is robust to imperfect face detections.
Face alignment is a classic problem in the computer vision field. Previous works mostly focus on sparse alignment with a limited number of facial landmark points, i.e., facial landmark detection. In this paper, for the first time, we aim at providing a very dense 3D alignment for large-pose face images. To achieve this, we train a CNN to estimate the 3D face shape, which not only aligns limited facial landmarks but also fits face contours and SIFT feature points. Moreover, we also address the bottleneck of training CNN with multiple datasets, due to different landmark markups on different datasets, such as 5, 34, 68. Experimental results show our method not only provides high-quality, dense 3D face fitting but also outperforms the state-of-the-art facial landmark detection methods on the challenging datasets. Our model can run at real time during testing.
3D face reconstruction is a fundamental Computer Vision problem of extraordinary difficulty. Current systems often assume the availability of multiple facial images (sometimes from the same subject) as input, and must address a number of methodological challenges such as establishing dense correspondences across large facial poses, expressions, and non-uniform illumination. In general these methods require complex and inefficient pipelines for model building and fitting. In this work, we propose to address many of these limitations by training a Convolutional Neural Network (CNN) on an appropriate dataset consisting of 2D images and 3D facial models or scans. Our CNN works with just a single 2D facial image, does not require accurate alignment nor establishes dense correspondence between images, works for arbitrary facial poses and expressions, and can be used to reconstruct the whole 3D facial geometry (including the non-visible parts of the face) bypassing the construction (during training) and fitting (during testing) of a 3D Morphable Model. We achieve this via a simple CNN architecture that performs direct regression of a volumetric representation of the 3D facial geometry from a single 2D image. We also demonstrate how the related task of facial landmark localization can be incorporated into the proposed framework and help improve reconstruction quality, especially for the cases of large poses and facial expressions. Testing code will be made available online, along with pre-trained models http://aaronsplace.co.uk/papers/jackson2017recon
This paper investigates how far a very deep neural network is from attaining close to saturating performance on existing 2D and 3D face alignment datasets. To this end, we make the following 5 contributions: (a) we construct, for the first time, a very strong baseline by combining a state-of-the-art architecture for landmark localization with a state-of-the-art residual block, train it on a very large yet synthetically expanded 2D facial landmark dataset and finally evaluate it on all other 2D facial landmark datasets. (b) We create a guided by 2D landmarks network which converts 2D landmark annotations to 3D and unifies all existing datasets, leading to the creation of LS3D-W, the largest and most challenging 3D facial landmark dataset to date ~230,000 images. (c) Following that, we train a neural network for 3D face alignment and evaluate it on the newly introduced LS3D-W. (d) We further look into the effect of all "traditional" factors affecting face alignment performance like large pose, initialization and resolution, and introduce a "new" one, namely the size of the network. (e) We show that both 2D and 3D face alignment networks achieve performance of remarkable accuracy which is probably close to saturating the datasets used. Training and testing code as well as the dataset can be downloaded from https://www.adrianbulat.com/face-alignment/
Facial alignment involves finding a set of landmark points on an image with a known semantic meaning. However, this semantic meaning of landmark points is often lost in 2D approaches where landmarks are either moved to visible boundaries or ignored as the pose of the face changes. In order to extract consistent alignment points across large poses, the 3D structure of the face must be considered in the alignment step. However, extracting a 3D structure from a single 2D image usually requires alignment in the first place. We present our novel approach to simultaneously extract the 3D shape of the face and the semantically consistent 2D alignment through a 3D Spatial Transformer Network (3DSTN) to model both the camera projection matrix and the warping parameters of a 3D model. By utilizing a generic 3D model and a Thin Plate Spline (TPS) warping function, we are able to generate subject specific 3D shapes without the need for a large 3D shape basis. In addition, our proposed network can be trained in an end-to-end framework on entirely synthetic data from the 300W-LP dataset. Unlike other 3D methods, our approach only requires one pass through the network resulting in a faster than real-time alignment. Evaluations of our model on the Annotated Facial Landmarks in the Wild (AFLW) and AFLW2000-3D datasets show our method achieves state-of-the-art performance over other 3D approaches to alignment.