Natural gradient descent, and the preconditioned optimizers which have followed from it, correct gradient descent by estimating curvature and applying its inverse to the gradient. For any single layer of a deep neural network, this correction can be shown to approximately separate into two factors: one which accounts for correlations in the gradient signal, and one which accounts for correlations in the data arriving at that layer. Herein we show that this second factor can be expressed as a change of basis rather than of curvature and, considered thus, it can be removed from the optimizer entirely and placed within the network itself. Specifically, we show that, once forward weights are corrected, right-sided natural gradient descent can be implemented in a form which has three exactly equivalent forms: a gradient preconditioner, a decorrelating linear transform in the forward pass, or a set of recurrent dynamics in which all updates are Hebbian and rely only upon locally available signals. The (recurrent) decorrelation method we discover aligns closely with proposed methods for inhibitory learning and homeostatic plasticity in the brain. Notably, our transform requires no matrix inverse, no matrix decomposition, and no information beyond that which is available at an individual synapse. It can therefore be applied in distributed and physically constrained systems, including neuromorphic hardware and nervous systems, where existing preconditioners cannot. We demonstrate its effectiveness empirically in convolutional and residual network models while significantly improving a range of approximate biologically plausible methods for credit assignment.
The proliferation of end devices has led to a distributed computing paradigm, wherein on-device machine learning models continuously process diverse data generated by these devices. The dynamic nature of this data, characterized by continuous changes or data drift, poses significant challenges for on-device models. To address this issue, continual learning (CL) is proposed, enabling machine learning models to incrementally update their knowledge and mitigate catastrophic forgetting. However, the traditional centralized approach to CL is unsuitable for end devices due to privacy and data volume concerns. In this context, federated continual learning (FCL) emerges as a promising solution, preserving user data locally while enhancing models through collaborative updates. Aiming at the challenges of limited storage resources for CL, poor autonomy in task shift detection, and difficulty in coping with new adversarial tasks in FCL scenario, we propose a novel FCL framework named SacFL. SacFL employs an Encoder-Decoder architecture to separate task-robust and task-sensitive components, significantly reducing storage demands by retaining lightweight task-sensitive components for resource-constrained end devices. Moreover, $\rm{SacFL}$ leverages contrastive learning to introduce an autonomous data shift detection mechanism, enabling it to discern whether a new task has emerged and whether it is a benign task. This capability ultimately allows the device to autonomously trigger CL or attack defense strategy without additional information, which is more practical for end devices. Comprehensive experiments conducted on multiple text and image datasets, such as Cifar100 and THUCNews, have validated the effectiveness of $\rm{SacFL}$ in both class-incremental and domain-incremental scenarios. Furthermore, a demo system has been developed to verify its practicality.
Convex clustering is a modern clustering framework that guarantees globally optimal solutions and performs comparably to other advanced clustering methods. However, obtaining a complete dendrogram (clusterpath) for large-scale datasets remains computationally challenging due to the extensive costs associated with iterative optimization approaches. To address this limitation, we develop a novel convex clustering algorithm called Tree-Guided $L_1$-Convex Clustering (TGCC). We first focus on the fact that the loss function of $L_1$-convex clustering with tree-structured weights can be efficiently optimized using a dynamic programming approach. We then develop an efficient cluster fusion algorithm that utilizes the tree structure of the weights to accelerate the optimization process and eliminate the issue of cluster splits commonly observed in convex clustering. By combining the dynamic programming approach with the cluster fusion algorithm, the TGCC algorithm achieves superior computational efficiency without sacrificing clustering performance. Remarkably, our TGCC algorithm can construct a complete clusterpath for $10^6$ points in $\mathbb{R}^2$ within 15 seconds on a standard laptop without the need for parallel or distributed computing frameworks. Moreover, we extend the TGCC algorithm to develop biclustering and sparse convex clustering algorithms.
Language models (LMs) are machine learning models designed to predict linguistic patterns by estimating the probability of word sequences based on large-scale datasets, such as text. LMs have a wide range of applications in natural language processing (NLP) tasks, including autocomplete and machine translation. Although larger datasets typically enhance LM performance, scalability remains a challenge due to constraints in computational power and resources. Distributed computing strategies offer essential solutions for improving scalability and managing the growing computational demand. Further, the use of sensitive datasets in training and deployment raises significant privacy concerns. Recent research has focused on developing decentralized techniques to enable distributed training and inference while utilizing diverse computational resources and enabling edge AI. This paper presents a survey on distributed solutions for various LMs, including large language models (LLMs), vision language models (VLMs), multimodal LLMs (MLLMs), and small language models (SLMs). While LLMs focus on processing and generating text, MLLMs are designed to handle multiple modalities of data (e.g., text, images, and audio) and to integrate them for broader applications. To this end, this paper reviews key advancements across the MLLM pipeline, including distributed training, inference, fine-tuning, and deployment, while also identifying the contributions, limitations, and future areas of improvement. Further, it categorizes the literature based on six primary focus areas of decentralization. Our analysis describes gaps in current methodologies for enabling distributed solutions for LMs and outline future research directions, emphasizing the need for novel solutions to enhance the robustness and applicability of distributed LMs.
Ensuring Service Level Objectives (SLOs) in large-scale architectures, such as Distributed Computing Continuum Systems (DCCS), is challenging due to their heterogeneous nature and varying service requirements across different devices and applications. Additionally, unpredictable workloads and resource limitations lead to fluctuating performance and violated SLOs. To improve SLO compliance in DCCS, one possibility is to apply machine learning; however, the design choices are often left to the developer. To that extent, we provide a benchmark of Active Inference -- an emerging method from neuroscience -- against three established reinforcement learning algorithms (Deep Q-Network, Advantage Actor-Critic, and Proximal Policy Optimization). We consider a realistic DCCS use case: an edge device running a video conferencing application alongside a WebSocket server streaming videos. Using one of the respective algorithms, we continuously monitor key performance metrics, such as latency and bandwidth usage, to dynamically adjust parameters -- including the number of streams, frame rate, and resolution -- to optimize service quality and user experience. To test algorithms' adaptability to constant system changes, we simulate dynamically changing SLOs and both instant and gradual data-shift scenarios, such as network bandwidth limitations and fluctuating device thermal states. Although the evaluated algorithms all showed advantages and limitations, our findings demonstrate that Active Inference is a promising approach for ensuring SLO compliance in DCCS, offering lower memory usage, stable CPU utilization, and fast convergence.
Mixture-of-Agents (MoA) has recently been proposed as a method to enhance performance of large language models (LLMs), enabling multiple individual LLMs to work together for collaborative inference. This collaborative approach results in improved responses to user prompts compared to relying on a single LLM. In this paper, we consider such an MoA architecture in a distributed setting, where LLMs operate on individual edge devices, each uniquely associated with a user and equipped with its own distributed computing power. These devices exchange information using decentralized gossip algorithms, allowing different device nodes to talk without the supervision of a centralized server. In the considered setup, different users have their own LLM models to address user prompts. Additionally, the devices gossip either their own user-specific prompts or augmented prompts to generate more refined answers to certain queries. User prompts are temporarily stored in the device queues when their corresponding LLMs are busy. Given the memory limitations of edge devices, it is crucial to ensure that the average queue sizes in the system remain bounded. In this paper, we address this by theoretically calculating the queuing stability conditions for the device queues under reasonable assumptions, which we validate experimentally as well. Further, we demonstrate through experiments, leveraging open-source LLMs for the implementation of distributed MoA, that certain MoA configurations produce higher-quality responses compared to others, as evaluated on AlpacaEval 2.0 benchmark. The implementation is available at: https://github.com/purbeshmitra/distributed_moa.
The emergence of large-scale Mixture of Experts (MoE) models represents a significant advancement in artificial intelligence, offering enhanced model capacity and computational efficiency through conditional computation. However, deploying and running inference on these models presents significant challenges in computational resources, latency, and energy efficiency. This comprehensive survey analyzes optimization techniques for MoE models across the entire system stack. We first establish a taxonomical framework that categorizes optimization approaches into model-level, system-level, and hardware-level optimizations. At the model level, we examine architectural innovations including efficient expert design, attention mechanisms, various compression techniques such as pruning, quantization, and knowledge distillation, as well as algorithm improvement including dynamic routing strategies and expert merging methods. At the system level, we investigate distributed computing approaches, load balancing mechanisms, and efficient scheduling algorithms that enable scalable deployment. Furthermore, we delve into hardware-specific optimizations and co-design strategies that maximize throughput and energy efficiency. This survey provides both a structured overview of existing solutions and identifies key challenges and promising research directions in MoE inference optimization. To facilitate ongoing updates and the sharing of cutting-edge advances in MoE inference optimization research, we have established a repository accessible at https://github.com/MoE-Inf/awesome-moe-inference/.
Timely and accurate economic data is crucial for effective policymaking. Current challenges in data timeliness and spatial resolution can be addressed with advancements in multimodal sensing and distributed computing. We introduce Senseconomic, a scalable system for tracking economic dynamics via multimodal imagery and deep learning. Built on the Transformer framework, it integrates remote sensing and street view images using cross-attention, with nighttime light data as weak supervision. The system achieved an R-squared value of 0.8363 in county-level economic predictions and halved processing time to 23 minutes using distributed computing. Its user-friendly design includes a Vue3-based front end with Baidu maps for visualization and a Python-based back end automating tasks like image downloads and preprocessing. Senseconomic empowers policymakers and researchers with efficient tools for resource allocation and economic planning.
This article introduces an iterative distributed computing estimator for the multinomial logistic regression model with large choice sets. Compared to the maximum likelihood estimator, the proposed iterative distributed estimator achieves significantly faster computation and, when initialized with a consistent estimator, attains asymptotic efficiency under a weak dominance condition. Additionally, we propose a parametric bootstrap inference procedure based on the iterative distributed estimator and establish its consistency. Extensive simulation studies validate the effectiveness of the proposed methods and highlight the computational efficiency of the iterative distributed estimator.
Online multi-task learning (OMTL) enhances streaming data processing by leveraging the inherent relations among multiple tasks. It can be described as an optimization problem in which a single loss function is defined for multiple tasks. Existing gradient-descent-based methods for this problem might suffer from gradient vanishing and poor conditioning issues. Furthermore, the centralized setting hinders their application to online parallel optimization, which is vital to big data analytics. Therefore, this study proposes a novel OMTL framework based on the alternating direction multiplier method (ADMM), a recent breakthrough in optimization suitable for the distributed computing environment because of its decomposable and easy-to-implement nature. The relations among multiple tasks are modeled dynamically to fit the constant changes in an online scenario. In a classical distributed computing architecture with a central server, the proposed OMTL algorithm with the ADMM optimizer outperforms SGD-based approaches in terms of accuracy and efficiency. Because the central server might become a bottleneck when the data scale grows, we further tailor the algorithm to a decentralized setting, so that each node can work by only exchanging information with local neighbors. Experimental results on a synthetic and several real-world datasets demonstrate the efficiency of our methods.
This paper investigates distributed computing and cooperative control of connected and automated vehicles (CAVs) in ramp merging scenario under transportation cyber-physical system. Firstly, a centralized cooperative trajectory planning problem is formulated subject to the safely constraints and traffic performance in ramp merging scenario, where the trajectories of all vehicles are jointly optimized. To get rid of the reliance on a central controller and reduce computation time, a distributed solution to this problem implemented among CAVs through Vehicles-to-Everything (V2X) communication is proposed. Unlike existing method, our method can distribute the computational task among CAVs and carry out parallel solving through V2X communication. Then, a multi-vehicles model predictive control (MPC) problem aimed at maximizing system stability and minimizing control input is formulated based on the solution of the first problem subject to strict safety constants and input limits. Due to these complex constraints, this problem becomes high-dimensional, centralized, and non-convex. To solve it in a short time, a decomposition and convex reformulation method, namely distributed cooperative iterative model predictive control (DCIMPC), is proposed. This method leverages the communication capability of CAVs to decompose the problem, making full use of the computational resources on vehicles to achieve fast solutions and distributed control. The two above problems with their corresponding solving methods form the systemic framework of the V2X assisted distributed computing and control. Simulations have been conducted to evaluate the framework's convergence, safety, and solving speed. Additionally, extra experiments are conducted to validate the performance of DCIMPC. The results show that our method can greatly improve computation speed without sacrificing system performance.
Edge computing is a distributed computing paradigm that collects and processes data at or near the source of data generation. The on-device learning at edge relies on device-to-device wireless communication to facilitate real-time data sharing and collaborative decision-making among multiple devices. This significantly improves the adaptability of the edge computing system to the changing environments. However, as the scale of the edge computing system is getting larger, communication among devices is becoming the bottleneck because of the limited bandwidth of wireless communication leads to large data transfer latency. To reduce the amount of device-to-device data transmission and accelerate on-device learning, in this paper, we propose Residual-INR, a fog computing-based communication-efficient on-device learning framework by utilizing implicit neural representation (INR) to compress images/videos into neural network weights. Residual-INR enhances data transfer efficiency by collecting JPEG images from edge devices, compressing them into INR format at the fog node, and redistributing them for on-device learning. By using a smaller INR for full image encoding and a separate object INR for high-quality object region reconstruction through residual encoding, our technique can reduce the encoding redundancy while maintaining the object quality. Residual-INR is a promising solution for edge on-device learning because it reduces data transmission by up to 5.16 x across a network of 10 edge devices. It also facilitates CPU-free accelerated on-device learning, achieving up to 2.9 x speedup without sacrificing accuracy. Our code is available at: https://github.com/sharc-lab/Residual-INR.
In several Machine Learning (ML) clustering and dimensionality reduction approaches, such as non-negative matrix factorization (NMF), RESCAL, and K-Means clustering, users must select a hyper-parameter k to define the number of clusters or components that yield an ideal separation of samples or clean clusters. This selection, while difficult, is crucial to avoid overfitting or underfitting the data. Several ML applications use scoring methods (e.g., Silhouette and Davies Boulding scores) to evaluate the cluster pattern stability for a specific k. The score is calculated for different trials over a range of k, and the ideal k is heuristically selected as the value before the model starts overfitting, indicated by a drop or increase in the score resembling an elbow curve plot. While the grid-search method can be used to accurately find a good k value, visiting a range of k can become time-consuming and computationally resource-intensive. In this paper, we introduce the Binary Bleed method based on binary search, which significantly reduces the k search space for these grid-search ML algorithms by truncating the target k values from the search space using a heuristic with thresholding over the scores. Binary Bleed is designed to work with single-node serial, single-node multi-processing, and distributed computing resources. In our experiments, we demonstrate the reduced search space gain over a naive sequential search of the ideal k and the accuracy of the Binary Bleed in identifying the correct k for NMFk, K-Means pyDNMFk, and pyDRESCALk with Silhouette and Davies Boulding scores. We make our implementation of Binary Bleed for the NMF algorithm available on GitHub.
Bi-level optimization (BO) has become a fundamental mathematical framework for addressing hierarchical machine learning problems. As deep learning models continue to grow in size, the demand for scalable bi-level optimization solutions has become increasingly critical. Traditional gradient-based bi-level optimization algorithms, due to their inherent characteristics, are ill-suited to meet the demands of large-scale applications. In this paper, we introduce $\textbf{F}$orward $\textbf{G}$radient $\textbf{U}$nrolling with $\textbf{F}$orward $\textbf{F}$radient, abbreviated as $(\textbf{FG})^2\textbf{U}$, which achieves an unbiased stochastic approximation of the meta gradient for bi-level optimization. $(\text{FG})^2\text{U}$ circumvents the memory and approximation issues associated with classical bi-level optimization approaches, and delivers significantly more accurate gradient estimates than existing large-scale bi-level optimization approaches. Additionally, $(\text{FG})^2\text{U}$ is inherently designed to support parallel computing, enabling it to effectively leverage large-scale distributed computing systems to achieve significant computational efficiency. In practice, $(\text{FG})^2\text{U}$ and other methods can be strategically placed at different stages of the training process to achieve a more cost-effective two-phase paradigm. Further, $(\text{FG})^2\text{U}$ is easy to implement within popular deep learning frameworks, and can be conveniently adapted to address more challenging zeroth-order bi-level optimization scenarios. We provide a thorough convergence analysis and a comprehensive practical discussion for $(\text{FG})^2\text{U}$, complemented by extensive empirical evaluations, showcasing its superior performance in diverse large-scale bi-level optimization tasks. Code is available at https://github.com/ShenQianli/FG2U.
In the rapidly evolving cryptocurrency landscape, trust is a critical yet underexplored factor shaping market behaviors and driving user preferences between centralized exchanges (CEXs) and decentralized exchanges (DEXs). Despite its importance, trust remains challenging to measure, limiting the study of its effects on market dynamics. The collapse of FTX, a major CEX, provides a unique natural experiment to examine the measurable impacts of trust and its sudden erosion on the cryptocurrency ecosystem. This pivotal event raised questions about the resilience of centralized trust systems and accelerated shifts toward decentralized alternatives. This research investigates the impacts of the FTX collapse on user trust, focusing on token valuation, trading flows, and sentiment dynamics. Employing causal inference methods, including Regression Discontinuity Design (RDD) and Difference-in-Differences (DID), we reveal significant declines in WETH prices and NetFlow from CEXs to DEXs, signaling a measurable transfer of trust. Additionally, natural language processing methods, including topic modeling and sentiment analysis, uncover the complexities of user responses, highlighting shifts from functional discussions to emotional fragmentation in Binance's community, while Uniswap's sentiment exhibits a gradual upward trend. Despite data limitations and external influences, the findings underscore the intricate interplay between trust, sentiment, and market behavior in the cryptocurrency ecosystem. By bridging blockchain analytics, behavioral finance, and decentralized finance (DeFi), this study contributes to interdisciplinary research, offering a deeper understanding of distributed trust mechanisms and providing critical insights for future investigations into the socio-technical dimensions of trust in digital economies.
Task offloading, crucial for balancing computational loads across devices in networks such as the Internet of Things, poses significant optimization challenges, including minimizing latency and energy usage under strict communication and storage constraints. While traditional optimization falls short in scalability; and heuristic approaches lack in achieving optimal outcomes, Reinforcement Learning (RL) offers a promising avenue by enabling the learning of optimal offloading strategies through iterative interactions. However, the efficacy of RL hinges on access to rich datasets and custom-tailored, realistic training environments. To address this, we introduce PeersimGym, an open-source, customizable simulation environment tailored for developing and optimizing task offloading strategies within computational networks. PeersimGym supports a wide range of network topologies and computational constraints and integrates a \textit{PettingZoo}-based interface for RL agent deployment in both solo and multi-agent setups. Furthermore, we demonstrate the utility of the environment through experiments with Deep Reinforcement Learning agents, showcasing the potential of RL-based approaches to significantly enhance offloading strategies in distributed computing settings. PeersimGym thus bridges the gap between theoretical RL models and their practical applications, paving the way for advancements in efficient task offloading methodologies.
In the rapidly evolving domain of electrical power systems, the Volt-VAR optimization (VVO) is increasingly critical, especially with the burgeoning integration of renewable energy sources. Traditional approaches to learning-based VVO in expansive and dynamically changing power systems are often hindered by computational complexities. To address this challenge, our research presents a novel framework that harnesses the potential of Deep Reinforcement Learning (DRL), specifically utilizing the Importance Weighted Actor-Learner Architecture (IMPALA) algorithm, executed on the RAY platform. This framework, built upon RLlib-an industry-standard in Reinforcement Learning-ingeniously capitalizes on the distributed computing capabilities and advanced hyperparameter tuning offered by RAY. This design significantly expedites the exploration and exploitation phases in the VVO solution space. Our empirical results demonstrate that our approach not only surpasses existing DRL methods in achieving superior reward outcomes but also manifests a remarkable tenfold reduction in computational requirements. The integration of our DRL agent with the RAY platform facilitates the creation of RLlib-IMPALA, a novel framework that efficiently uses RAY's resources to improve system adaptability and control. RLlib-IMPALA leverages RAY's toolkit to enhance analytical capabilities and significantly speeds up training to become more than 10 times faster than other state-of-the-art DRL methods.
Efficient inference in high-dimensional models is a central challenge in machine learning. We introduce the Gaussian Ensemble Belief Propagation (GEnBP) algorithm, which combines the strengths of the Ensemble Kalman Filter (EnKF) and Gaussian Belief Propagation (GaBP) to address this challenge. GEnBP updates ensembles of prior samples into posterior samples by passing low-rank local messages over the edges of a graphical model, enabling efficient handling of high-dimensional states, parameters, and complex, noisy, black-box generation processes. By utilizing local message passing within a graphical model structure, GEnBP effectively manages complex dependency structures and remains computationally efficient even when the ensemble size is much smaller than the inference dimension -- a common scenario in spatiotemporal modeling, image processing, and physical model inversion. We demonstrate that GEnBP can be applied to various problem structures, including data assimilation, system identification, and hierarchical models, and show through experiments that it outperforms existing belief propagation methods in terms of accuracy and computational efficiency. Supporting code is available at https://github.com/danmackinlay/GEnBP
In this study, we developed a computational framework for simulating large-scale agent-based financial markets. Our platform supports trading multiple simultaneous assets and leverages distributed computing to scale the number and complexity of simulated agents. Heterogeneous agents make decisions in parallel, and their orders are processed through a realistic, continuous double auction matching engine. We present a baseline model implementation and show that it captures several known statistical properties of real financial markets (i.e., stylized facts). Further, we demonstrate these results without fitting models to historical financial data. Thus, this framework could be used for direct applications such as human-in-the-loop machine learning or to explore theoretically exciting questions about market microstructure's role in forming the statistical regularities of real markets. To the best of our knowledge, this study is the first to implement multiple assets, parallel agent decision-making, a continuous double auction mechanism, and intelligent agent types in a scalable real-time environment.
With the growth of large language models, now incorporating billions of parameters, the hardware prerequisites for their training and deployment have seen a corresponding increase. Although existing tools facilitate model parallelization and distributed training, deeper model interactions, crucial for interpretability and responsible AI techniques, still demand thorough knowledge of distributed computing. This often hinders contributions from researchers with machine learning expertise but limited distributed computing background. Addressing this challenge, we present FlexModel, a software package providing a streamlined interface for engaging with models distributed across multi-GPU and multi-node configurations. The library is compatible with existing model distribution libraries and encapsulates PyTorch models. It exposes user-registerable HookFunctions to facilitate straightforward interaction with distributed model internals, bridging the gap between distributed and single-device model paradigms. Primarily, FlexModel enhances accessibility by democratizing model interactions and promotes more inclusive research in the domain of large-scale neural networks. The package is found at https://github.com/VectorInstitute/flex_model.