Large language model inference on Central Processing Units (CPU) is challenging due to the vast quantities of expensive Multiply-Add (MAD) matrix operations in the attention computations. In this paper, we argue that there is a rare gem in modern CPUs, Single-Instruction-Multiple-Data (SIMD) registers, which allow for ultra-low-latency lookups in batch. We leverage this unique capability of CPUs to propose NoMAD-Attention, an efficient attention algorithm that replaces MAD operations with in-register lookups. Through hardware-aware algorithmic designs, NoMAD-Attention achieves the computation of attention scores using repeated fast accesses to SIMD registers despite their highly limited sizes. Moreover, NoMAD-Attention works with pre-trained attention-based LLMs without model finetuning. Empirical evaluations demonstrate that NoMAD-Attention maintains the quality of the original LLMs well, and speeds up the 4-bit quantized LLaMA-7B-based model by up to 2$\times$ at 16k context length. Our results are reproducible at https://github.com/tonyzhang617/nomad-dist.
Side-channel attacks allow extracting secret information from the execution of cryptographic primitives by correlating the partially known computed data and the measured side-channel signal. However, to set up a successful side-channel attack, the attacker has to perform i) the challenging task of locating the time instant in which the target cryptographic primitive is executed inside a side-channel trace and then ii)the time-alignment of the measured data on that time instant. This paper presents a novel deep-learning technique to locate the time instant in which the target computed cryptographic operations are executed in the side-channel trace. In contrast to state-of-the-art solutions, the proposed methodology works even in the presence of trace deformations obtained through random delay insertion techniques. We validated our proposal through a successful attack against a variety of unprotected and protected cryptographic primitives that have been executed on an FPGA-implemented system-on-chip featuring a RISC-V CPU.
Recently, the increasing use of deep reinforcement learning for flow control problems has led to a new area of research, focused on the coupling and the adaptation of the existing algorithms to the control of numerical fluid dynamics environments. Although still in its infancy, the field has seen multiple successes in a short time span, and its fast development pace can certainly be partly imparted to the open-source effort that drives the expansion of the community. Yet, this emerging domain still misses a common ground to (i) ensure the reproducibility of the results, and (ii) offer a proper ad-hoc benchmarking basis. To this end, we propose Beacon, an open-source benchmark library composed of seven lightweight 1D and 2D flow control problems with various characteristics, action and observation space characteristics, and CPU requirements. In this contribution, the seven considered problems are described, and reference control solutions are provided. The sources for the following work are available at https://github.com/jviquerat/beacon.
Graph Neural Networks (GNNs) are emerging ML models to analyze graph-structure data. Graph Neural Network (GNN) execution involves both compute-intensive and memory-intensive kernels, the latter dominates the total time, being significantly bottlenecked by data movement between memory and processors. Processing-In-Memory (PIM) systems can alleviate this data movement bottleneck by placing simple processors near or inside to memory arrays. In this work, we introduce PyGim, an efficient ML library that accelerates GNNs on real PIM systems. We propose intelligent parallelization techniques for memory-intensive kernels of GNNs tailored for real PIM systems, and develop handy Python API for them. We provide hybrid GNN execution, in which the compute-intensive and memory-intensive kernels are executed in processor-centric and memory-centric computing systems, respectively. We extensively evaluate PyGim on a real-world PIM system with 1992 PIM cores using emerging GNN models, and demonstrate that it outperforms its state-of-the-art CPU counterpart on Intel Xeon by on average 3.04x, and achieves higher resource utilization than CPU and GPU systems. Our work provides useful recommendations for software, system and hardware designers. PyGim is publicly available at https://github.com/CMU-SAFARI/PyGim.
As the modern CPU, GPU, and NPU chip design complexity and transistor counts keep increasing, and with the relentless shrinking of semiconductor technology nodes to nearly 1 nanometer, the placement and routing have gradually become the two most pivotal processes in modern very-large-scale-integrated (VLSI) circuit back-end design. How to evaluate routability efficiently and accurately in advance (at the placement and global routing stages) has grown into a crucial research area in the field of artificial intelligence (AI) assisted electronic design automation (EDA). In this paper, we propose a novel U-Net variant model boosted by an Inception embedded module to predict Routing Congestion (RC) and Design Rule Checking (DRC) hotspots. Experimental results on the recently published CircuitNet dataset benchmark show that our proposed method achieves up to 5% (RC) and 20% (DRC) rate reduction in terms of Avg-NRMSE (Average Normalized Root Mean Square Error) compared to the classic architecture. Furthermore, our approach consistently outperforms the prior model on the SSIM (Structural Similarity Index Measure) metric.
Bimodal objects, such as the checkerboard pattern used in camera calibration, markers for object tracking, and text on road signs, to name a few, are prevalent in our daily lives and serve as a visual form to embed information that can be easily recognized by vision systems. While binarization from intensity images is crucial for extracting the embedded information in the bimodal objects, few previous works consider the task of binarization of blurry images due to the relative motion between the vision sensor and the environment. The blurry images can result in a loss in the binarization quality and thus degrade the downstream applications where the vision system is in motion. Recently, neuromorphic cameras offer new capabilities for alleviating motion blur, but it is non-trivial to first deblur and then binarize the images in a real-time manner. In this work, we propose an event-based binary reconstruction method that leverages the prior knowledge of the bimodal target's properties to perform inference independently in both event space and image space and merge the results from both domains to generate a sharp binary image. We also develop an efficient integration method to propagate this binary image to high frame rate binary video. Finally, we develop a novel method to naturally fuse events and images for unsupervised threshold identification. The proposed method is evaluated in publicly available and our collected data sequence, and shows the proposed method can outperform the SOTA methods to generate high frame rate binary video in real-time on CPU-only devices.
As deep neural networks (DNNs) grow in complexity and size, the resultant increase in communication overhead during distributed training has become a significant bottleneck, challenging the scalability of distributed training systems. Existing solutions, while aiming to mitigate this bottleneck through worker-level compression and in-network aggregation, fall short due to their inability to efficiently reconcile the trade-offs between compression effectiveness and computational overhead, hindering overall performance and scalability. In this paper, we introduce a novel compression algorithm that effectively merges worker-level compression with in-network aggregation. Our solution is both homomorphic, allowing for efficient in-network aggregation without CPU/GPU processing, and lossless, ensuring no compromise on training accuracy. Theoretically optimal in compression and computational efficiency, our approach is empirically validated across diverse DNN models such as NCF, LSTM, VGG19, and BERT-base, showing up to a 6.33$\times$ improvement in aggregation throughput and a 3.74$\times$ increase in per-iteration training speed.
Large Language Models (LLMs) with the Mixture-of-Experts (MoE) architectures have shown promising performance on various tasks. However, due to the huge model sizes, running them in resource-constrained environments where the GPU memory is not abundant is challenging. Some existing systems propose to use CPU resources to solve that, but they either suffer from the significant overhead of frequently moving data between CPU and GPU, or fail to consider distinct characteristics of CPUs and GPUs. This paper proposes Fiddler, a resource-efficient inference system for MoE models with limited GPU resources. Fiddler strategically utilizes CPU and GPU resources by determining the optimal execution strategy. Our evaluation shows that, unlike state-of-the-art systems that optimize for specific scenarios such as single batch inference or long prefill, Fiddler performs better in all scenarios. Compared against different baselines, Fiddler achieves 1.26 times speed up in single batch inference, 1.30 times in long prefill processing, and 11.57 times in beam search inference. The code of Fiddler is publicly available at https://github.com/efeslab/fiddler.
In recent years, microservices have gained widespread adoption in IT operations due to their scalability, maintenance, and flexibility. However, it becomes challenging for site reliability engineers (SREs) to pinpoint the root cause due to the complex relationships in microservices when facing system malfunctions. Previous research employed structured learning methods (e.g., PC-algorithm) to establish causal relationships and derive root causes from causal graphs. Nevertheless, they ignored the temporal order of time series data and failed to leverage the rich information inherent in the temporal relationships. For instance, in cases where there is a sudden spike in CPU utilization, it can lead to an increase in latency for other microservices. However, in this scenario, the anomaly in CPU utilization occurs before the latency increase, rather than simultaneously. As a result, the PC-algorithm fails to capture such characteristics. To address these challenges, we propose RUN, a novel approach for root cause analysis using neural Granger causal discovery with contrastive learning. RUN enhances the backbone encoder by integrating contextual information from time series, and leverages a time series forecasting model to conduct neural Granger causal discovery. In addition, RUN incorporates Pagerank with a personalization vector to efficiently recommend the top-k root causes. Extensive experiments conducted on the synthetic and real-world microservice-based datasets demonstrate that RUN noticeably outperforms the state-of-the-art root cause analysis methods. Moreover, we provide an analysis scenario for the sock-shop case to showcase the practicality and efficacy of RUN in microservice-based applications. Our code is publicly available at https://github.com/zmlin1998/RUN.
Recently, efficient Vision Transformers have shown great performance with low latency on resource-constrained devices. Conventionally, they use 4x4 patch embeddings and a 4-stage structure at the macro level, while utilizing sophisticated attention with multi-head configuration at the micro level. This paper aims to address computational redundancy at all design levels in a memory-efficient manner. We discover that using larger-stride patchify stem not only reduces memory access costs but also achieves competitive performance by leveraging token representations with reduced spatial redundancy from the early stages. Furthermore, our preliminary analyses suggest that attention layers in the early stages can be substituted with convolutions, and several attention heads in the latter stages are computationally redundant. To handle this, we introduce a single-head attention module that inherently prevents head redundancy and simultaneously boosts accuracy by parallelly combining global and local information. Building upon our solutions, we introduce SHViT, a Single-Head Vision Transformer that obtains the state-of-the-art speed-accuracy tradeoff. For example, on ImageNet-1k, our SHViT-S4 is 3.3x, 8.1x, and 2.4x faster than MobileViTv2 x1.0 on GPU, CPU, and iPhone12 mobile device, respectively, while being 1.3% more accurate. For object detection and instance segmentation on MS COCO using Mask-RCNN head, our model achieves performance comparable to FastViT-SA12 while exhibiting 3.8x and 2.0x lower backbone latency on GPU and mobile device, respectively.
Deep learning-based methods have made significant achievements in music source separation. However, obtaining good results while maintaining a low model complexity remains challenging in super wide-band music source separation. Previous works either overlook the differences in subbands or inadequately address the problem of information loss when generating subband features. In this paper, we propose SCNet, a novel frequency-domain network to explicitly split the spectrogram of the mixture into several subbands and introduce a sparsity-based encoder to model different frequency bands. We use a higher compression ratio on subbands with less information to improve the information density and focus on modeling subbands with more information. In this way, the separation performance can be significantly improved using lower computational consumption. Experiment results show that the proposed model achieves a signal to distortion ratio (SDR) of 9.0 dB on the MUSDB18-HQ dataset without using extra data, which outperforms state-of-the-art methods. Specifically, SCNet's CPU inference time is only 48% of HT Demucs, one of the previous state-of-the-art models.
Speech bandwidth extension (BWE) refers to widening the frequency bandwidth range of speech signals, enhancing the speech quality towards brighter and fuller. This paper proposes a generative adversarial network (GAN) based BWE model with parallel prediction of Amplitude and Phase spectra, named AP-BWE, which achieves both high-quality and efficient wideband speech waveform generation. The proposed AP-BWE generator is entirely based on convolutional neural networks (CNNs). It features a dual-stream architecture with mutual interaction, where the amplitude stream and the phase stream communicate with each other and respectively extend the high-frequency components from the input narrowband amplitude and phase spectra. To improve the naturalness of the extended speech signals, we employ a multi-period discriminator at the waveform level and design a pair of multi-resolution amplitude and phase discriminators at the spectral level, respectively. Experimental results demonstrate that our proposed AP-BWE achieves state-of-the-art performance in terms of speech quality for BWE tasks targeting sampling rates of both 16 kHz and 48 kHz. In terms of generation efficiency, due to the all-convolutional architecture and all-frame-level operations, the proposed AP-BWE can generate 48 kHz waveform samples 292.3 times faster than real-time on a single RTX 4090 GPU and 18.1 times faster than real-time on a single CPU. Notably, to our knowledge, AP-BWE is the first to achieve the direct extension of the high-frequency phase spectrum, which is beneficial for improving the effectiveness of existing BWE methods.
In contemporary times, the increasing complexity of the system poses significant challenges to the reliability, trustworthiness, and security of the SACRES. Key issues include the susceptibility to phenomena such as instantaneous voltage spikes, electromagnetic interference, neutron strikes, and out-of-range temperatures. These factors can induce switch state changes in transistors, resulting in bit-flipping, soft errors, and transient corruption of stored data in memory. The occurrence of soft errors, in turn, may lead to system faults that can propel the system into a hazardous state. Particularly in critical sectors like automotive, avionics, or aerospace, such malfunctions can have real-world implications, potentially causing harm to individuals. This paper introduces a novel fault injector designed to facilitate the monitoring, aggregation, and examination of micro-architectural events. This is achieved by harnessing the microprocessor's PMU and the debugging interface, specifically focusing on ensuring the repeatability of fault injections. The fault injection methodology targets bit-flipping within the memory system, affecting CPU registers and RAM. The outcomes of these fault injections enable a thorough analysis of the impact of soft errors and establish a robust correlation between the identified faults and the essential timing predictability demanded by SACRES.
The emergence of accurate open large language models (LLMs) has led to a race towards performant quantization techniques which can enable their execution on end-user devices. In this paper, we revisit the problem of "extreme" LLM compression-defined as targeting extremely low bit counts, such as 2 to 3 bits per parameter-from the point of view of classic methods in Multi-Codebook Quantization (MCQ). Our algorithm, called AQLM, generalizes the classic Additive Quantization (AQ) approach for information retrieval to advance the state-of-the-art in LLM compression, via two innovations: 1) learned additive quantization of weight matrices in input-adaptive fashion, and 2) joint optimization of codebook parameters across each transformer blocks. Broadly, AQLM is the first scheme that is Pareto optimal in terms of accuracy-vs-model-size when compressing to less than 3 bits per parameter, and significantly improves upon all known schemes in the extreme compression (2bit) regime. In addition, AQLM is practical: we provide fast GPU and CPU implementations of AQLM for token generation, which enable us to match or outperform optimized FP16 implementations for speed, while executing in a much smaller memory footprint.
A demonstration of a real-time and continuous turn-taking prediction system is presented. The system is based on a voice activity projection (VAP) model, which directly maps dialogue stereo audio to future voice activities. The VAP model includes contrastive predictive coding (CPC) and self-attention transformers, followed by a cross-attention transformer. We examine the effect of the input context audio length and demonstrate that the proposed system can operate in real-time with CPU settings, with minimal performance degradation.
In this paper, we present IntervalMDP.jl, a Julia package for probabilistic analysis of interval Markov Decision Processes (IMDPs). IntervalMDP.jl facilitates the synthesis of optimal strategies and verification of IMDPs against reachability specifications and discounted reward properties. The library supports sparse matrices and is compatible with data formats from common tools for the analysis of probabilistic models, such as PRISM. A key feature of IntervalMDP.jl is that it presents both a multi-threaded CPU and a GPU-accelerated implementation of value iteration algorithms for IMDPs. In particular, IntervalMDP.jl takes advantage of the Julia type system and the inherently parallelizable nature of value iteration to improve the efficiency of performing analysis of IMDPs. On a set of examples, we show that IntervalMDP.jl substantially outperforms existing tools for verification and strategy synthesis for IMDPs in both computation time and memory consumption.
Large pre-trained models excel in zero/few-shot learning for language and vision tasks but face challenges in multivariate time series (TS) forecasting due to diverse data characteristics. Consequently, recent research efforts have focused on developing pre-trained TS forecasting models. These models, whether built from scratch or adapted from large language models (LLMs), excel in zero/few-shot forecasting tasks. However, they are limited by slow performance, high computational demands, and neglect of cross-channel and exogenous correlations. To address this, we introduce Tiny Time Mixers (TTM), a compact model (starting from 1M parameters) with effective transfer learning capabilities, trained exclusively on public TS datasets. TTM, based on the light-weight TSMixer architecture, incorporates innovations like adaptive patching, diverse resolution sampling, and resolution prefix tuning to handle pre-training on varied dataset resolutions with minimal model capacity. Additionally, it employs multi-level modeling to capture channel correlations and infuse exogenous signals during fine-tuning. TTM outperforms existing popular benchmarks in zero/few-shot forecasting by (4-40%), while reducing computational requirements significantly. Moreover, TTMs are lightweight and can be executed even on CPU-only machines, enhancing usability and fostering wider adoption in resource-constrained environments. The model weights for reproducibility and research use are available at https://huggingface.co/ibm/ttm-research-r2/, while enterprise-use weights under the Apache license can be accessed as follows: the initial TTM-Q variant at https://huggingface.co/ibm-granite/granite-timeseries-ttm-r1, and the latest variants (TTM-B, TTM-E, TTM-A) weights are available at https://huggingface.co/ibm-granite/granite-timeseries-ttm-r2.
Digital twins are an important technology for advancing mobile communications, specially in use cases that require simultaneously simulating the wireless channel, 3D scenes and machine learning. Aiming at providing a solution to this demand, this work describes a modular co-simulation methodology called CAVIAR. Here, CAVIAR is upgraded to support a message passing library and enable the virtual counterpart of a digital twin system using different 6G-related simulators. The main contributions of this work are the detailed description of different CAVIAR architectures, the implementation of this methodology to assess a 6G use case of UAV-based search and rescue mission (SAR), and the generation of benchmarking data about the computational resource usage. For executing the SAR co-simulation we adopt five open-source solutions: the physical and link level network simulator Sionna, the simulator for autonomous vehicles AirSim, scikit-learn for training a decision tree for MIMO beam selection, Yolov8 for the detection of rescue targets and NATS for message passing. Results for the implemented SAR use case suggest that the methodology can run in a single machine, with the main demanded resources being the CPU processing and the GPU memory.
We present the Locally Adaptive Morphable Model (LAMM), a highly flexible Auto-Encoder (AE) framework for learning to generate and manipulate 3D meshes. We train our architecture following a simple self-supervised training scheme in which input displacements over a set of sparse control vertices are used to overwrite the encoded geometry in order to transform one training sample into another. During inference, our model produces a dense output that adheres locally to the specified sparse geometry while maintaining the overall appearance of the encoded object. This approach results in state-of-the-art performance in both disentangling manipulated geometry and 3D mesh reconstruction. To the best of our knowledge LAMM is the first end-to-end framework that enables direct local control of 3D vertex geometry in a single forward pass. A very efficient computational graph allows our network to train with only a fraction of the memory required by previous methods and run faster during inference, generating 12k vertex meshes at $>$60fps on a single CPU thread. We further leverage local geometry control as a primitive for higher level editing operations and present a set of derivative capabilities such as swapping and sampling object parts. Code and pretrained models can be found at https://github.com/michaeltrs/LAMM.
We present MobileVLM, a competent multimodal vision language model (MMVLM) targeted to run on mobile devices. It is an amalgamation of a myriad of architectural designs and techniques that are mobile-oriented, which comprises a set of language models at the scale of 1.4B and 2.7B parameters, trained from scratch, a multimodal vision model that is pre-trained in the CLIP fashion, cross-modality interaction via an efficient projector. We evaluate MobileVLM on several typical VLM benchmarks. Our models demonstrate on par performance compared with a few much larger models. More importantly, we measure the inference speed on both a Qualcomm Snapdragon 888 CPU and an NVIDIA Jeston Orin GPU, and we obtain state-of-the-art performance of 21.5 tokens and 65.3 tokens per second, respectively. Our code will be made available at: https://github.com/Meituan-AutoML/MobileVLM.