PyTorchKR Papers

“Object Detection”

총 4,472편
태그·기간 등 상세 필터

카테고리 탐색

arXiv:2404.17903공식 코드 · Papers with Code

3D Extended Object Tracking by Fusing Roadside Sparse Radar Point Clouds and Pixel Keypoints

Roadside perception is a key component in intelligent transportation systems. In this paper, we present a novel three-dimensional (3D) extended object tracking (EOT) method, which simultaneously estimates the object kinematics and extent state, in roadside perception using both the radar and camera data. Because of the influence of sensor viewing angle and limited angle resolution, radar measurements from objects are sparse and non-uniformly distributed, leading to inaccuracies in object extent and position estimation. To address this problem, we present a novel spherical Gaussian function weighted Gaussian mixture model. This model assumes that radar measurements originate from a series of probabilistic weighted radar reflectors on the vehicle's extent. Additionally, we utilize visual detection of vehicle keypoints to provide additional information on the positions of radar reflectors. Since keypoints may not always correspond to radar reflectors, we propose an elastic skeleton fusion mechanism, which constructs a virtual force to establish the relationship between the radar reflectors on the vehicle and its extent. Furthermore, to better describe the kinematic state of the vehicle and constrain its extent state, we develop a new 3D constant turn rate and velocity motion model, considering the complex 3D motion of the vehicle relative to the roadside sensor. Finally, we apply variational Bayesian approximation to the intractable measurement update step to enable recursive Bayesian estimation of the object's state. Simulation results using the Carla simulator and experimental results on the nuScenes dataset demonstrate the effectiveness and superiority of the proposed method in comparison to several state-of-the-art 3D EOT methods.

arXiv:2004.05966공식 코드 · Papers with Code

CVPR 2019 WAD Challenge on Trajectory Prediction and 3D Perception

This paper reviews the CVPR 2019 challenge on Autonomous Driving. Baidu's Robotics and Autonomous Driving Lab (RAL) providing 150 minutes labeled Trajectory and 3D Perception dataset including about 80k lidar point cloud and 1000km trajectories for urban traffic. The challenge has two tasks in (1) Trajectory Prediction and (2) 3D Lidar Object Detection. There are more than 200 teams submitted results on Leaderboard and more than 1000 participants attended the workshop.

arXiv:2003.13586공식 코드 · Papers with Code

Squeezed Deep 6DoF Object Detection Using Knowledge Distillation

The detection of objects considering a 6DoF pose is a common requirement to build virtual and augmented reality applications. It is usually a complex task which requires real-time processing and high precision results for adequate user experience. Recently, different deep learning techniques have been proposed to detect objects in 6DoF in RGB images. However, they rely on high complexity networks, requiring a computational power that prevents them from working on mobile devices. In this paper, we propose an approach to reduce the complexity of 6DoF detection networks while maintaining accuracy. We used Knowledge Distillation to teach portables Convolutional Neural Networks (CNN) to learn from a real-time 6DoF detection CNN. The proposed method allows real-time applications using only RGB images while decreasing the hardware requirements. We used the LINEMOD dataset to evaluate the proposed method, and the experimental results show that the proposed method reduces the memory requirement by almost 99\% in comparison to the original architecture with the cost of reducing half the accuracy in one of the metrics. Code is available at https://github.com/heitorcfelix/singleshot6Dpose.

arXiv:2211.06660공식 코드 · Papers with Code

Far Away in the Deep Space: Dense Nearest-Neighbor-Based Out-of-Distribution Detection

The key to out-of-distribution detection is density estimation of the in-distribution data or of its feature representations. This is particularly challenging for dense anomaly detection in domains where the in-distribution data has a complex underlying structure. Nearest-Neighbors approaches have been shown to work well in object-centric data domains, such as industrial inspection and image classification. In this paper, we show that nearest-neighbor approaches also yield state-of-the-art results on dense novelty detection in complex driving scenes when working with an appropriate feature representation. In particular, we find that transformer-based architectures produce representations that yield much better similarity metrics for the task. We identify the multi-head structure of these models as one of the reasons, and demonstrate a way to transfer some of the improvements to CNNs. Ultimately, the approach is simple and non-invasive, i.e., it does not affect the primary segmentation performance, refrains from training on examples of anomalies, and achieves state-of-the-art results on RoadAnomaly, StreetHazards, and SegmentMeIfYouCan-Anomaly.

arXiv:2309.06276공식 코드 · Papers with Code

OTAS: Unsupervised Boundary Detection for Object-Centric Temporal Action Segmentation

Temporal action segmentation is typically achieved by discovering the dramatic variances in global visual descriptors. In this paper, we explore the merits of local features by proposing the unsupervised framework of Object-centric Temporal Action Segmentation (OTAS). Broadly speaking, OTAS consists of self-supervised global and local feature extraction modules as well as a boundary selection module that fuses the features and detects salient boundaries for action segmentation. As a second contribution, we discuss the pros and cons of existing frame-level and boundary-level evaluation metrics. Through extensive experiments, we find OTAS is superior to the previous state-of-the-art method by $41\%$ on average in terms of our recommended F1 score. Surprisingly, OTAS even outperforms the ground-truth human annotations in the user study. Moreover, OTAS is efficient enough to allow real-time inference.

arXiv:1911.08287공식 코드 · Papers with Code

Distance-IoU Loss: Faster and Better Learning for Bounding Box Regression

Bounding box regression is the crucial step in object detection. In existing methods, while $\ell_n$-norm loss is widely adopted for bounding box regression, it is not tailored to the evaluation metric, i.e., Intersection over Union (IoU). Recently, IoU loss and generalized IoU (GIoU) loss have been proposed to benefit the IoU metric, but still suffer from the problems of slow convergence and inaccurate regression. In this paper, we propose a Distance-IoU (DIoU) loss by incorporating the normalized distance between the predicted box and the target box, which converges much faster in training than IoU and GIoU losses. Furthermore, this paper summarizes three geometric factors in bounding box regression, \ie, overlap area, central point distance and aspect ratio, based on which a Complete IoU (CIoU) loss is proposed, thereby leading to faster convergence and better performance. By incorporating DIoU and CIoU losses into state-of-the-art object detection algorithms, e.g., YOLO v3, SSD and Faster RCNN, we achieve notable performance gains in terms of not only IoU metric but also GIoU metric. Moreover, DIoU can be easily adopted into non-maximum suppression (NMS) to act as the criterion, further boosting performance improvement. The source code and trained models are available at https://github.com/Zzh-tju/DIoU.

arXiv:2111.11837공식 코드 · Papers with Code

Focal and Global Knowledge Distillation for Detectors

Knowledge distillation has been applied to image classification successfully. However, object detection is much more sophisticated and most knowledge distillation methods have failed on it. In this paper, we point out that in object detection, the features of the teacher and student vary greatly in different areas, especially in the foreground and background. If we distill them equally, the uneven differences between feature maps will negatively affect the distillation. Thus, we propose Focal and Global Distillation (FGD). Focal distillation separates the foreground and background, forcing the student to focus on the teacher's critical pixels and channels. Global distillation rebuilds the relation between different pixels and transfers it from teachers to students, compensating for missing global information in focal distillation. As our method only needs to calculate the loss on the feature map, FGD can be applied to various detectors. We experiment on various detectors with different backbones and the results show that the student detector achieves excellent mAP improvement. For example, ResNet-50 based RetinaNet, Faster RCNN, RepPoints and Mask RCNN with our distillation method achieve 40.7%, 42.0%, 42.0% and 42.1% mAP on COCO2017, which are 3.3, 3.6, 3.4 and 2.9 higher than the baseline, respectively. Our codes are available at https://github.com/yzd-v/FGD.

arXiv:2112.09532공식 코드 · Papers with Code

Pixel Distillation: A New Knowledge Distillation Scheme for Low-Resolution Image Recognition

Previous knowledge distillation (KD) methods mostly focus on compressing network architectures, which is not thorough enough in deployment as some costs like transmission bandwidth and imaging equipment are related to the image size. Therefore, we propose Pixel Distillation that extends knowledge distillation into the input level while simultaneously breaking architecture constraints. Such a scheme can achieve flexible cost control for deployment, as it allows the system to adjust both network architecture and image quality according to the overall requirement of resources. Specifically, we first propose an input spatial representation distillation (ISRD) mechanism to transfer spatial knowledge from large images to student's input module, which can facilitate stable knowledge transfer between CNN and ViT. Then, a Teacher-Assistant-Student (TAS) framework is further established to disentangle pixel distillation into the model compression stage and input compression stage, which significantly reduces the overall complexity of pixel distillation and the difficulty of distilling intermediate knowledge. Finally, we adapt pixel distillation to object detection via an aligned feature for preservation (AFP) strategy for TAS, which aligns output dimensions of detectors at each stage by manipulating features and anchors of the assistant. Comprehensive experiments on image classification and object detection demonstrate the effectiveness of our method. Code is available at https://github.com/gyguo/PixelDistillation.

arXiv:2208.03327공식 코드 · Papers with Code

Seamless Iterative Semi-Supervised Correction of Imperfect Labels in Microscopy Images

In-vitro tests are an alternative to animal testing for the toxicity of medical devices. Detecting cells as a first step, a cell expert evaluates the growth of cells according to cytotoxicity grade under the microscope. Thus, human fatigue plays a role in error making, making the use of deep learning appealing. Due to the high cost of training data annotation, an approach without manual annotation is needed. We propose Seamless Iterative Semi-Supervised correction of Imperfect labels (SISSI), a new method for training object detection models with noisy and missing annotations in a semi-supervised fashion. Our network learns from noisy labels generated with simple image processing algorithms, which are iteratively corrected during self-training. Due to the nature of missing bounding boxes in the pseudo labels, which would negatively affect the training, we propose to train on dynamically generated synthetic-like images using seamless cloning. Our method successfully provides an adaptive early learning correction technique for object detection. The combination of early learning correction that has been applied in classification and semantic segmentation before and synthetic-like image generation proves to be more effective than the usual semi-supervised approach by > 15% AP and > 20% AR across three different readers. Our code is available at https://github.com/marwankefah/SISSI.

arXiv:2303.15710공식 코드 · Papers with Code

Explicit Attention-Enhanced Fusion for RGB-Thermal Perception Tasks

Recently, RGB-Thermal based perception has shown significant advances. Thermal information provides useful clues when visual cameras suffer from poor lighting conditions, such as low light and fog. However, how to effectively fuse RGB images and thermal data remains an open challenge. Previous works involve naive fusion strategies such as merging them at the input, concatenating multi-modality features inside models, or applying attention to each data modality. These fusion strategies are straightforward yet insufficient. In this paper, we propose a novel fusion method named Explicit Attention-Enhanced Fusion (EAEF) that fully takes advantage of each type of data. Specifically, we consider the following cases: i) both RGB data and thermal data, ii) only one of the types of data, and iii) none of them generate discriminative features. EAEF uses one branch to enhance feature extraction for i) and iii) and the other branch to remedy insufficient representations for ii). The outputs of two branches are fused to form complementary features. As a result, the proposed fusion method outperforms state-of-the-art by 1.6\% in mIoU on semantic segmentation, 3.1\% in MAE on salient object detection, 2.3\% in mAP on object detection, and 8.1\% in MAE on crowd counting. The code is available at https://github.com/FreeformRobotics/EAEFNet.

arXiv:2305.17931공식 코드 · Papers with Code

Monocular 2D Camera-based Proximity Monitoring for Human-Machine Collision Warning on Construction Sites

Accident of struck-by machines is one of the leading causes of casualties on construction sites. Monitoring workers' proximities to avoid human-machine collisions has aroused great concern in construction safety management. Existing methods are either too laborious and costly to apply extensively, or lacking spatial perception for accurate monitoring. Therefore, this study proposes a novel framework for proximity monitoring using only an ordinary 2D camera to realize real-time human-machine collision warning, which is designed to integrate a monocular 3D object detection model to perceive spatial information from 2D images and a post-processing classification module to identify the proximity as four predefined categories: Dangerous, Potentially Dangerous, Concerned, and Safe. A virtual dataset containing 22000 images with 3D annotations is constructed and publicly released to facilitate the system development and evaluation. Experimental results show that the trained 3D object detection model achieves 75% loose AP within 20 meters. Besides, the implemented system is real-time and camera carrier-independent, achieving an F1 of roughly 0.8 within 50 meters under specified settings for machines of different sizes. This study preliminarily reveals the potential and feasibility of proximity monitoring using only a 2D camera, providing a new promising and economical way for early warning of human-machine collisions.

arXiv:2409.01686공식 코드 · Papers with Code

Frequency-Spatial Entanglement Learning for Camouflaged Object Detection

Camouflaged object detection has attracted a lot of attention in computer vision. The main challenge lies in the high degree of similarity between camouflaged objects and their surroundings in the spatial domain, making identification difficult. Existing methods attempt to reduce the impact of pixel similarity by maximizing the distinguishing ability of spatial features with complicated design, but often ignore the sensitivity and locality of features in the spatial domain, leading to sub-optimal results. In this paper, we propose a new approach to address this issue by jointly exploring the representation in the frequency and spatial domains, introducing the Frequency-Spatial Entanglement Learning (FSEL) method. This method consists of a series of well-designed Entanglement Transformer Blocks (ETB) for representation learning, a Joint Domain Perception Module for semantic enhancement, and a Dual-domain Reverse Parser for feature integration in the frequency and spatial domains. Specifically, the ETB utilizes frequency self-attention to effectively characterize the relationship between different frequency bands, while the entanglement feed-forward network facilitates information interaction between features of different domains through entanglement learning. Our extensive experiments demonstrate the superiority of our FSEL over 21 state-of-the-art methods, through comprehensive quantitative and qualitative comparisons in three widely-used datasets. The source code is available at: https://github.com/CSYSI/FSEL.

arXiv:2204.01868공식 코드 · Papers with Code

Truck Axle Detection with Convolutional Neural Networks

Axle count in trucks is important to the classification of vehicles and to the operation of road systems. It is used in the determination of service fees and in the impact on the pavement. Although axle count can be achieved with traditional methods, such as manual labor, it is increasingly possible to count axles using deep learning and computer vision methods. This paper aims to compare three deep-learning object detection algorithms, YOLO, Faster R-CNN, and SSD, for the detection of truck axles. A dataset was built to provide training and testing examples for the neural networks. The training was done on different base models, to increase training time efficiency and to compare results. We evaluated results based on five metrics: precision, recall, mAP, F1-score, and FPS count. Results indicate that YOLO and SSD have similar accuracy and performance, with more than 96\% mAP for both models. Datasets and codes are publicly available for download.

arXiv:2011.05940공식 코드 · Papers with Code

LittleYOLO-SPP: A Delicate Real-Time Vehicle Detection Algorithm

Vehicle detection in real-time is a challenging and important task. The existing real-time vehicle detection lacks accuracy and speed. Real-time systems must detect and locate vehicles during criminal activities like theft of vehicle and road traffic violations with high accuracy. Detection of vehicles in complex scenes with occlusion is also extremely difficult. In this study, a lightweight model of deep neural network LittleYOLO-SPP based on the YOLOv3-tiny network is proposed to detect vehicles effectively in real-time. The YOLOv3-tiny object detection network is improved by modifying its feature extraction network to increase the speed and accuracy of vehicle detection. The proposed network incorporated Spatial pyramid pooling into the network, which consists of different scales of pooling layers for concatenation of features to enhance network learning capability. The Mean square error (MSE) and Generalized IoU (GIoU) loss function for bounding box regression is used to increase the performance of the network. The network training includes vehicle-based classes from PASCAL VOC 2007,2012 and MS COCO 2014 datasets such as car, bus, and truck. LittleYOLO-SPP network detects the vehicle in real-time with high accuracy regardless of video frame and weather conditions. The improved network achieves a higher mAP of 77.44% on PASCAL VOC and 52.95% mAP on MS COCO datasets.

arXiv:2303.08744공식 코드 · Papers with Code

Towards Phytoplankton Parasite Detection Using Autoencoders

Phytoplankton parasites are largely understudied microbial components with a potentially significant ecological impact on phytoplankton bloom dynamics. To better understand their impact, we need improved detection methods to integrate phytoplankton parasite interactions in monitoring aquatic ecosystems. Automated imaging devices usually produce high amount of phytoplankton image data, while the occurrence of anomalous phytoplankton data is rare. Thus, we propose an unsupervised anomaly detection system based on the similarity of the original and autoencoder-reconstructed samples. With this approach, we were able to reach an overall F1 score of 0.75 in nine phytoplankton species, which could be further improved by species-specific fine-tuning. The proposed unsupervised approach was further compared with the supervised Faster R-CNN based object detector. With this supervised approach and the model trained on plankton species and anomalies, we were able to reach the highest F1 score of 0.86. However, the unsupervised approach is expected to be more universal as it can detect also unknown anomalies and it does not require any annotated anomalous data that may not be always available in sufficient quantities. Although other studies have dealt with plankton anomaly detection in terms of non-plankton particles, or air bubble detection, our paper is according to our best knowledge the first one which focuses on automated anomaly detection considering putative phytoplankton parasites or infections.

arXiv:2109.03495공식 코드 · Papers with Code

Temporal RoI Align for Video Object Recognition

Video object detection is challenging in the presence of appearance deterioration in certain video frames. Therefore, it is a natural choice to aggregate temporal information from other frames of the same video into the current frame. However, RoI Align, as one of the most core procedures of video detectors, still remains extracting features from a single-frame feature map for proposals, making the extracted RoI features lack temporal information from videos. In this work, considering the features of the same object instance are highly similar among frames in a video, a novel Temporal RoI Align operator is proposed to extract features from other frames feature maps for current frame proposals by utilizing feature similarity. The proposed Temporal RoI Align operator can extract temporal information from the entire video for proposals. We integrate it into single-frame video detectors and other state-of-the-art video detectors, and conduct quantitative experiments to demonstrate that the proposed Temporal RoI Align operator can consistently and significantly boost the performance. Besides, the proposed Temporal RoI Align can also be applied into video instance segmentation. Codes are available at https://github.com/open-mmlab/mmtracking

arXiv:2406.04221공식 코드 · Papers with Code

Matching Anything by Segmenting Anything

The robust association of the same objects across video frames in complex scenes is crucial for many applications, especially Multiple Object Tracking (MOT). Current methods predominantly rely on labeled domain-specific video datasets, which limits the cross-domain generalization of learned similarity embeddings. We propose MASA, a novel method for robust instance association learning, capable of matching any objects within videos across diverse domains without tracking labels. Leveraging the rich object segmentation from the Segment Anything Model (SAM), MASA learns instance-level correspondence through exhaustive data transformations. We treat the SAM outputs as dense object region proposals and learn to match those regions from a vast image collection. We further design a universal MASA adapter which can work in tandem with foundational segmentation or detection models and enable them to track any detected objects. Those combinations present strong zero-shot tracking ability in complex domains. Extensive tests on multiple challenging MOT and MOTS benchmarks indicate that the proposed method, using only unlabeled static images, achieves even better performance than state-of-the-art methods trained with fully annotated in-domain video sequences, in zero-shot association. Project Page: https://matchinganything.github.io/

arXiv:2505.08126공식 코드 · Papers with Code

Asynchronous Multi-Object Tracking with an Event Camera

Events cameras are ideal sensors for enabling robots to detect and track objects in highly dynamic environments due to their low latency output, high temporal resolution, and high dynamic range. In this paper, we present the Asynchronous Event Multi-Object Tracking (AEMOT) algorithm for detecting and tracking multiple objects by processing individual raw events asynchronously. AEMOT detects salient event blob features by identifying regions of consistent optical flow using a novel Field of Active Flow Directions built from the Surface of Active Events. Detected features are tracked as candidate objects using the recently proposed Asynchronous Event Blob (AEB) tracker in order to construct small intensity patches of each candidate object. A novel learnt validation stage promotes or discards candidate objects based on classification of their intensity patches, with promoted objects having their position, velocity, size, and orientation estimated at their event rate. We evaluate AEMOT on a new Bee Swarm Dataset, where it tracks dozens of small bees with precision and recall performance exceeding that of alternative event-based detection and tracking algorithms by over 37%. Source code and the labelled event Bee Swarm Dataset will be open sourced

arXiv:2111.07370공식 코드 · Papers with Code

Co-segmentation Inspired Attention Module for Video-based Computer Vision Tasks

Video-based computer vision tasks can benefit from estimation of the salient regions and interactions between those regions. Traditionally, this has been done by identifying the object regions in the images by utilizing pre-trained models to perform object detection, object segmentation and/or object pose estimation. Although using pre-trained models is a viable approach, it has several limitations in the need for an exhaustive annotation of object categories, a possible domain gap between datasets, and a bias that is typically present in pre-trained models. In this work, we propose to utilize the common rationale that a sequence of video frames capture a set of common objects and interactions between them, thus a notion of co-segmentation between the video frame features may equip the model with the ability to automatically focus on task-specific salient regions and improve the underlying task's performance in an end-to-end manner. In this regard, we propose a generic module called ``Co-Segmentation inspired Attention Module'' (COSAM) that can be plugged in to any CNN model to promote the notion of co-segmentation based attention among a sequence of video frame features. We show the application of COSAM in three video-based tasks namely: 1) Video-based person re-ID, 2) Video captioning, & 3) Video action classification and demonstrate that COSAM is able to capture the task-specific salient regions in video frames, thus leading to notable performance improvements along with interpretable attention maps for a variety of video-based vision tasks, with possible application to other video-based vision tasks as well.

arXiv:2012.10631공식 코드 · Papers with Code

BAF-Detector: An Efficient CNN-Based Detector for Photovoltaic Cell Defect Detection

The multi-scale defect detection for photovoltaic (PV) cell electroluminescence (EL) images is a challenging task, due to the feature vanishing as network deepens. To address this problem, an attention-based top-down and bottom-up architecture is developed to accomplish multi-scale feature fusion. This architecture, called Bidirectional Attention Feature Pyramid Network (BAFPN), can make all layers of the pyramid share similar semantic features. In BAFPN, cosine similarity is employed to measure the importance of each pixel in the fused features. Furthermore, a novel object detector is proposed, called BAF-Detector, which embeds BAFPN into Region Proposal Network (RPN) in Faster RCNN+FPN. BAFPN improves the robustness of the network to scales, thus the proposed detector achieves a good performance in multi-scale defects detection task. Finally, the experimental results on a large-scale EL dataset including 3629 images, 2129 of which are defective, show that the proposed method achieves 98.70% (F-measure), 88.07% (mAP), and 73.29% (IoU) in terms of multi-scale defects classification and detection results in raw PV cell EL images.