Despite the popularity of guitar effects, there is very little existing research on classification and parameter estimation of specific plugins or effect units from guitar recordings. In this paper, convolutional neural networks were used for classification and parameter estimation for 13 overdrive, distortion and fuzz guitar effects. A novel dataset of processed electric guitar samples was assembled, with four sub-datasets consisting of monophonic or polyphonic samples and discrete or continuous settings values, for a total of about 250 hours of processed samples. Results were compared for networks trained and tested on the same or on a different sub-dataset. We found that discrete datasets could lead to equally high performance as continuous ones, whilst being easier to design, analyse and modify. Classification accuracy was above 80\%, with confusion matrices reflecting similarities in the effects timbre and circuits design. With parameter values between 0.0 and 1.0, the mean absolute error is in most cases below 0.05, while the root mean square error is below 0.1 in all cases but one.
Accurate estimation of the distance between the transmitter (TX) and the receiver (RX) in molecular communication (MC) systems can provide faster and more reliable communication. Existing theoretical models in the literature are not suitable for distance estimation in a practical scenario. Furthermore, deriving an analytical model is not easy due to effects such as boundary conditions in the diffusion process, the initial velocity of the molecules and unsteady flows. Therefore, five different practical methods comprising three novel data analysis based methods and two supervised machine learning (ML) methods, Multivariate Linear Regression (MLR) and Neural Network Regression (NNR), are proposed for distance estimation at the RX side. In order to apply the ML methods, a macroscale practical MC system, which consists of an electric sprayer without a fan, alcohol molecules, an alcohol sensor and a microcontroller, is established, and the received signals are recorded. A feature extraction algorithm is proposed to utilize the measured signals as the inputs in ML methods. The numerical results show that the ML methods outperform the data analysis based methods in the root mean square error sense with the cost of complexity. Moreover, the peak time based estimation, which is one of the proposed data analysis based methods, yields better results with respect to the other proposed four methods, as the distance increases. Given the experimental data and fluid dynamics theory, a possible trajectory of the molecules between the TX and RX is given. Our findings show that distance estimation performance is jointly affected by unsteady flows and the non-linearity of the sensor. According to our findings based on fluid dynamics, it is evaluated that fluid dynamics should be taken into account for more accurate parameter estimation in practical macroscale MC systems.
We present a method for estimating parameters in stochastic models of biochemical reaction networks by fitting steady-state distributions using Wasserstein distances. We simulate a reaction network at different parameter settings and train a Gaussian process to learn the Wasserstein distance between observations and the simulator output for all parameters. We then use Bayesian optimization to find parameters minimizing this distance based on the trained Gaussian process. The effectiveness of our method is demonstrated on the three-stage model of gene expression and a genetic feedback loop for which moment-based methods are known to perform poorly. Our method is applicable to any simulator model of stochastic reaction networks, including Brownian Dynamics.
Models of biological systems often have many unknown parameters that must be determined in order for model behavior to match experimental observations. Commonly-used methods for parameter estimation that return point estimates of the best-fit parameters are insufficient when models are high dimensional and under-constrained. As a result, Bayesian methods, which treat model parameters as random variables and attempt to estimate their probability distributions given data, have become popular in systems biology. Bayesian parameter estimation often relies on Markov Chain Monte Carlo (MCMC) methods to sample model parameter distributions, but the slow convergence of MCMC sampling can be a major bottleneck. One approach to improving performance is parallel tempering (PT), a physics-based method that uses swapping between multiple Markov chains run in parallel at different temperatures to accelerate sampling. The temperature of a Markov chain determines the probability of accepting an unfavorable move, so swapping with higher temperatures chains enables the sampling chain to escape from local minima. In this work we compared the MCMC performance of PT and the commonly-used Metropolis-Hastings (MH) algorithm on six biological models of varying complexity. We found that for simpler models PT accelerated convergence and sampling, and that for more complex models, PT often converged in cases MH became trapped in non-optimal local minima. We also developed a freely-available MATLAB package for Bayesian parameter estimation called PTempEst (http://github.com/RuleWorld/ptempest), which is closely integrated with the popular BioNetGen software for rule-based modeling of biological systems.
We introduce a low dimensional function of the site frequency spectrum that is tailor-made for distinguishing coalescent models with multiple mergers from Kingman coalescent models with population growth, and use this function to construct a hypothesis test between these model classes. The null and alternative sampling distributions of the statistic are intractable, but its low dimensionality renders them amenable to Monte Carlo estimation. We construct kernel density estimates of the sampling distributions based on simulated data, and show that the resulting hypothesis test dramatically improves on the statistical power of a current state-of-the-art method. A key reason for this improvement is the use of multi-locus data, in particular averaging observed site frequency spectra across unlinked loci to reduce sampling variance. We also demonstrate the robustness of our method to nuisance and tuning parameters. Finally we show that the same kernel density estimates can be used to conduct parameter estimation, and argue that our method is readily generalisable for applications in model selection, parameter inference and experimental design.
Wide field-of-view (FOV) cameras, which capture a larger scene area than narrow FOV cameras, are used in many applications including 3D reconstruction, autonomous driving, and video surveillance. However, wide-angle images contain distortions that violate the assumptions underlying pinhole camera models, resulting in object distortion, difficulties in estimating scene distance, area, and direction, and preventing the use of off-the-shelf deep models trained on undistorted images for downstream computer vision tasks. Image rectification, which aims to correct these distortions, can solve these problems. In this paper, we comprehensively survey progress in wide-angle image rectification from transformation models to rectification methods. Specifically, we first present a detailed description and discussion of the camera models used in different approaches. Then, we summarize several distortion models including radial distortion and projection distortion. Next, we review both traditional geometry-based image rectification methods and deep learning-based methods, where the former formulate distortion parameter estimation as an optimization problem and the latter treat it as a regression problem by leveraging the power of deep neural networks. We evaluate the performance of state-of-the-art methods on public datasets and show that although both kinds of methods can achieve good results, these methods only work well for specific camera models and distortion types. We also provide a strong baseline model and carry out an empirical study of different distortion models on synthetic datasets and real-world wide-angle images. Finally, we discuss several potential research directions that are expected to further advance this area in the future.
A large variety of sophisticated metaheuristic methods have been proposed for photovoltaic parameter extraction. Our aim is not to develop another metaheuristic method but to investigate two practically important yet rarely studied issues: (i) whether existing results are already globally optimal; (ii) whether a significantly simpler metaheuristic can achieve equally good performance. We take the two widely used I-V curve datasets for case studies. The first issue is addressed using a branch and bound algorithm, which certifies the global minimum rigorously or locates a fairly tight upper bound, despite its intolerable slowness. These values are useful references for fair evaluation and further development of metaheuristics. Next, extensive examination and comparison reveal that, perhaps surprisingly, an elementary differential evolution (DE) algorithm can either attain the global minimum certified above or obtain the best-known result. More attractively, the simple DE algorithm takes only a fraction of the runtime of state-of-the-art metaheuristic methods and is particularly preferable in time-sensitive applications. This novel, unusual, and notable finding also indicates that the employment of increasingly complicated metaheuristics might be somewhat overkilling for regular PV parameter estimation. Finally, we discuss the implications of these results for future research and suggest the simple DE method as the first choice for industrial applications.
Simulators are a critical component of modern robotics research. Strategies for both perception and decision making can be studied in simulation first before deployed to real world systems, saving on time and costs. Despite significant progress on the development of sim-to-real algorithms, the analysis of different methods is still conducted in an ad-hoc manner, without a consistent set of tests and metrics for comparison. This paper fills this gap and proposes a set of benchmarks and a framework for the study of various algorithms aimed to transfer models and policies learnt in simulation to the real world. We conduct experiments on a wide range of well known simulated environments to characterize and offer insights into the performance of different algorithms. Our analysis can be useful for practitioners working in this area and can help make informed choices about the behavior and main properties of sim-to-real algorithms. We open-source the benchmark, training data, and trained models, which can be found at https://github.com/NVlabs/sim-parameter-estimation.
The log-likelihood of a generative model often involves both positive and negative terms. For a temporal multivariate point process, the negative term sums over all the possible event types at each time and also integrates over all the possible times. As a result, maximum likelihood estimation is expensive. We show how to instead apply a version of noise-contrastive estimation---a general parameter estimation method with a less expensive stochastic objective. Our specific instantiation of this general idea works out in an interestingly non-trivial way and has provable guarantees for its optimality, consistency and efficiency. On several synthetic and real-world datasets, our method shows benefits: for the model to achieve the same level of log-likelihood on held-out data, our method needs considerably fewer function evaluations and less wall-clock time.
We present a novel Machine Learning (ML) based strategy to search for binary black hole (BBH) mergers in data from ground-based gravitational wave (GW) observatories. This is the first ML-based search that not only recovers all the compact binary coalescences (CBCs) in the first GW transients catalog (GWTC-1), but also makes a clean detection of GW151216 by only adding a new coincident ranking statistic (MLStat) to a standard analysis that was used for GWTC-1. In CBC searches, reducing contamination by terrestrial and instrumental transients, which create a loud noise background by triggering numerous false alarms, is crucial to improving the sensitivity for detecting true events. The sheer volume of data and a large number of expected detections also prompts the use of ML techniques. We perform transfer learning to train "InceptionV3", a pre-trained deep neural network, along with curriculum learning to distinguish GW signals from noisy events by analysing their continuous wavelet transform (CWT) maps. MLStat incorporates information from this ML classifier into the coincident search likelihood used by the standard PyCBC search. This leads to at least an order of magnitude improvement in the inverse false-alarm-rate (IFAR) for the previously "low significance" events GW151012, GW170729 and GW151216. We also perform the parameter estimation of GW151216 using SEOBNRv4HM_ROM. We carry out an injection study to show that MLStat brings substantial improvement to the detection sensitivity of Advanced LIGO for all compact binary coalescences. The average improvement in the sensitive volume is ~10% for low chirp masses (0.8-5 Msun), and ~30% for higher masses (5-50 Msun). This work demonstrates the immense potential and readiness of MLStat for finding new sources in current data and the possibility of its adaptation in similar searches.
Histogram-based template fits are the main technique used for estimating parameters of high energy physics Monte Carlo generators. Parametrized neural network reweighting can be used to extend this fitting procedure to many dimensions and does not require binning. If the fit is to be performed using reconstructed data, then expensive detector simulations must be used for training the neural networks. We introduce a new two-level fitting approach that only requires one dataset with detector simulation and then a set of additional generation-level datasets without detector effects included. This Simulation-level fit based on Reweighting Generator-level events with Neural networks (SRGN) is demonstrated using simulated datasets for a variety of examples including a simple Gaussian random variable, parton shower tuning, and the top quark mass extraction.
We consider the parameter estimation problem of a probabilistic generative model prescribed using a natural exponential family of distributions. For this problem, the typical maximum likelihood estimator usually overfits under limited training sample size, is sensitive to noise and may perform poorly on downstream predictive tasks. To mitigate these issues, we propose a distributionally robust maximum likelihood estimator that minimizes the worst-case expected log-loss uniformly over a parametric Kullback-Leibler ball around a parametric nominal distribution. Leveraging the analytical expression of the Kullback-Leibler divergence between two distributions in the same natural exponential family, we show that the min-max estimation problem is tractable in a broad setting, including the robust training of generalized linear models. Our novel robust estimator also enjoys statistical consistency and delivers promising empirical results in both regression and classification tasks.
The problem of monotone missing data has been broadly studied during the last two decades and has many applications in different fields such as bioinformatics or statistics. Commonly used imputation techniques require multiple iterations through the data before yielding convergence. Moreover, those approaches may introduce extra noises and biases to the subsequent modeling. In this work, we derive exact formulas and propose a novel algorithm to compute the maximum likelihood estimators (MLEs) of a multiple class, monotone missing dataset when all the covariance matrices of all categories are assumed to be equal, namely EPEM. We then illustrate an application of our proposed methods in Linear Discriminant Analysis (LDA). As the computation is exact, our EPEM algorithm does not require multiple iterations through the data as other imputation approaches, thus promising to handle much less time-consuming than other methods. This effectiveness was validated by empirical results when EPEM reduced the error rates significantly and required a short computation time compared to several imputation-based approaches. We also release all codes and data of our experiments in one GitHub repository to contribute to the research community related to this problem.
Predictions for physical systems often rely upon knowledge acquired from ensembles of entities, e.g., ensembles of cells in biological sciences. For qualitative and quantitative analysis, these ensembles are simulated with parametric families of mechanistic models (MM). Two classes of methodologies, based on Bayesian inference and Population of Models, currently prevail in parameter estimation for physical systems. However, in Bayesian analysis, uninformative priors for MM parameters introduce undesirable bias. Here, we propose how to infer parameters within the framework of stochastic inverse problems (SIP), also termed data-consistent inversion, wherein the prior targets only uncertainties that arise due to MM non-invertibility. To demonstrate, we introduce new methods to solve SIP based on rejection sampling, Markov chain Monte Carlo, and generative adversarial networks (GANs). In addition, to overcome limitations of SIP, we reformulate SIP based on constrained optimization and present a novel GAN to solve the constrained optimization problem.
Magnetic resonance fingerprinting (MRF) enables fast and multiparametric MR imaging. Despite fast acquisition, the state-of-the-art reconstruction of MRF based on dictionary matching is slow and lacks scalability. To overcome these limitations, neural network (NN) approaches estimating MR parameters from fingerprints have been proposed recently. Here, we revisit NN-based MRF reconstruction to jointly learn the forward process from MR parameters to fingerprints and the backward process from fingerprints to MR parameters by leveraging invertible neural networks (INNs). As a proof-of-concept, we perform various experiments showing the benefit of learning the forward process, i.e., the Bloch simulations, for improved MR parameter estimation. The benefit especially accentuates when MR parameter estimation is difficult due to MR physical restrictions. Therefore, INNs might be a feasible alternative to the current solely backward-based NNs for MRF reconstruction.
We introduce an automatic, end-to-end method for recovering the 3D pose and shape of dogs from monocular internet images. The large variation in shape between dog breeds, significant occlusion and low quality of internet images makes this a challenging problem. We learn a richer prior over shapes than previous work, which helps regularize parameter estimation. We demonstrate results on the Stanford Dog dataset, an 'in the wild' dataset of 20,580 dog images for which we have collected 2D joint and silhouette annotations to split for training and evaluation. In order to capture the large shape variety of dogs, we show that the natural variation in the 2D dataset is enough to learn a detailed 3D prior through expectation maximization (EM). As a by-product of training, we generate a new parameterized model (including limb scaling) SMBLD which we release alongside our new annotation dataset StanfordExtra to the research community.
Fitting probabilistic models to data is often difficult, due to the general intractability of the partition function. We propose a new parameter fitting method, Minimum Probability Flow (MPF), which is applicable to any parametric model. We demonstrate parameter estimation using MPF in two cases: a continuous state space model, and an Ising spin glass. In the latter case it outperforms current techniques by at least an order of magnitude in convergence time with lower error in the recovered coupling parameters.
Fitting probabilistic models to data is often difficult, due to the general intractability of the partition function and its derivatives. Here we propose a new parameter estimation technique that does not require computing an intractable normalization factor or sampling from the equilibrium distribution of the model. This is achieved by establishing dynamics that would transform the observed data distribution into the model distribution, and then setting as the objective the minimization of the KL divergence between the data distribution and the distribution produced by running the dynamics for an infinitesimal time. Score matching, minimum velocity learning, and certain forms of contrastive divergence are shown to be special cases of this learning technique. We demonstrate parameter estimation in Ising models, deep belief networks and an independent component analysis model of natural scenes. In the Ising model case, current state of the art techniques are outperformed by at least an order of magnitude in learning time, with lower error in recovered coupling parameters.
An end-to-end image analysis pipeline is presented for the abdominal MRI protocol used in the UK Biobank on the first 38,971 participants. Emphasis is on the processing steps necessary to ensure a high-level of data quality and consistency is produced in order to prepare the datasets for downstream quantitative analysis, such as segmentation and parameter estimation. Quality control procedures have been incorporated to detect and, where possible, correct issues in the raw data. Detection of fat-water swaps in the Dixon series is performed by a deep learning model and corrected automatically. Bone joints are predicted using a hybrid atlas-based registration and deep learning model for the shoulders, hips and knees. Simultaneous estimation of proton density fat fraction and transverse relaxivity (R2*) is performed using both the magnitude and phase information for the single-slice multiecho series. Approximately 98.1% of the two-point Dixon acquisitions were successfully processed and passed quality control, with 99.98% of the high-resolution T1-weighted 3D volumes succeeding. Approximately 99.98% of the single-slice multiecho acquisitions covering the liver were successfully processed and passed quality control, with 97.6% of the single-slice multiecho acquisitions covering the pancreas succeeding. At least one fat-water swap was detected in 1.8% of participants. With respect to the bone joints, approximately 3.3% of participants were missing at least one knee joint and 0.8% were missing at least one shoulder joint. For the participants who received both single-slice multiecho acquisition protocols for the liver a systematic difference between the two protocols was identified and modeled using multiple linear regression. The findings presented here will be invaluable for scientists who seek to use image-derived phenotypes from the abdominal MRI protocol.
We derive uniform convergence rates for the maximum likelihood estimator and minimax lower bounds for parameter estimation in two-component location-scale Gaussian mixture models with unequal variances. We assume the mixing proportions of the mixture are known and fixed, but make no separation assumption on the underlying mixture components. A phase transition is shown to exist in the optimal parameter estimation rate, depending on whether or not the mixture is balanced. Key to our analysis is a careful study of the dependence between the parameters of location-scale Gaussian mixture models, as captured through systems of polynomial equalities and inequalities whose solution set drives the rates we obtain. A simulation study illustrates the theoretical findings of this work.